AEconversion inv250-45-eu plc
The inv250-45-eu plc from AEconversion (11-05-500293-01) is a powerful 250 w micro inverter that converts the energy generated from your solar modules directly into grid-compliant 230v alternating current. For this purpose, the micro inverter is directly connected to a photovoltaic module. This enables the optimal utilization of the solar energy. The inv250-45-eu can work with a maximum pv input voltage of 45v. It has the important, integrated na protection according to vde ar-n-4105
Photovoltaic modules equipped with AEconversion micro-inverters operate independently. A micro-inverter is connected directly behind one or two pv-modules and converts the generated direct current into grid-compliant alternating current. Maximum Power Point Tracking (mppt) is performed at the modular level, minimizing the negative effects of shadowing and module mismatch.
Performance features of the inv250-45-eu plc
- Low system cost by eliminating the need for individual dc components and complicated system and shadow planning
- max pv power 250w, max dc voltage 45v, max dc current 11A
- integrated na protection according to vde ar-n-4105, frequency 50 Hz, protection degree: IP65
- plc based system communication
- Higher yields due to module based MPP tracking
- Wide range of applications for both grid-connected systems and stand-alone systems with very simple installation
- Wide MPP tracking range increases system efficiency
- High module compatibility
- Display of battery charging phases
- Voltage and charge current displays
integrated disconnecting device according to vde ar-n 4105
The additional installation of an external disconnection device becomes unnecessary when using AEconversion micro-inverters, as the legally required disconnection device according to vde-ar-n 4105 is already integrated. In micro-inverter pv systems from AEconversion, component and installation costs can be reduced by up to 15%. dc components such as dc junction boxes or dc disconnectors become unnecessary. System and shadow planning, as for string systems, are eliminated, and the ease and speed of installation provided by the "plug-and-play" system further reduces capital costs. The cost-effective monitoring and system accessories make the AEconversion system an economical installation.
System design with plc micro inverters from AEconversion
AEconversion offers all the necessary components of an effective photovoltaic system, including micro-inverters with Powerline communication, cost-effective monitoring devices and other accessories. The Powerline system consists of micro-inverters with integrated Powerline communication, each connected to one or two modules.
H4-pv connectors can be used if the pv modules are not equipped with compatible pv connectors.
pv branch connectors are used when micro-inverters are connected in parallel to two modules. AC cabling and AC distribution blocks are used to connect the micro-inverters to each other and to the grid. All open AC connections must be sealed with a sealing piece. AC cable is not included in the scope of delivery.
There are three main options for monitoring the system: (1) web-based data logger aedl-lan in conjunction with a Powerline Gateway, (2) data logger aedl-uh or (3) Powerline Gateway in conjunction with a USB-plc interface converter.
Scope of delivery:
1x AEconversion 11-05-500293-01 inv250-45eu plc
1x user manual and data sheet