Beko Fire protection silicone 310 ml gray sealant

Beko Fire Protection Silicone (mpn 228 03) is a neutral-curing silicone sealant. The sealant is fire retardant and flame retardant while being easy to dispense, smooth and process. Fire protection silicone is suitable for a wide range of applications. The technical data can be found in the data sheet in the "Downloads" section.

Areas of application

• Suitable for fire protection on mineral building materials in accordance with din 4102, group b1
• Sealing and jointing of breakthroughs or penetrations in the field of trade, industry, building construction, metal and window construction

Properties

• Fire protection according to din 4102 class b1 - flame retardant
• Tested according to en13501-2 (EI240)
• Permanently elastic
• Ageing, weathering & UV resistant
• Neutral curing
• Wide adhesion spectrum
• Label-free

Areas of application

• Construction industry
• Industry
• Metal construction
• Window construction

Processing

Correct joint dimensioning and pretreatment of the bonding surfaces are prerequisites for proper and flawless application. To meet the fire protection classification, the joints must not exceed a width of 15 mm and a depth of 10 mm. A clean, grease-free and structurally sound substrate is required to achieve maximum bond strength. In the case of marble, sandstone and similar highly absorbent and sensitive substrates, edge soiling may occur if priming is inadequate. beko Brandschutz-Silicon adheres to many substrates without primer. However, an adhesion test is generally recommended, and the use of a primer is necessary if adhesion is poor. For optimum joint dimensioning, observe ivd Leaflet No. 27, Section 8.1. To prevent three-sided adhesion, beko backfill material should be used

Scope of delivery:

1x Beko Fire protection silicone 310ml cartridge gray