The Offgridtec PSI 12-1500 (MPN 011090) is an advanced 12V 230V sine wave voltage converter of the latest generation. The unit features a 16Bit SPWM chipset, numerous protection mechanisms and galvanically isolated inputs and outputs. The input voltage range is 10.6 and 16Vdc. The converter can deliver 1500W for 15 minutes or 1200W continuously. For short inrush currents, the PSI 12-1500 delivers 2400W. Thanks to its advanced constitution, even sensitive electrical appliances can be supplied with power reliably and permanently Advanced development of the HP voltage transformer family The PSI series is the further development of the HP voltage transformers and comes up trumps with numerous innovations and optimisations: Input and output of the PSI are galvanically isolated and the housing has an earth connection. Mains frequency (50Hz/60Hz) and output voltage (220V / 230V) can be set via a dip switch. The brand-new SPWM 16-bit chipset delivers power of the highest quality and allows even very sensitive electronics to be reliably supplied with power. Compared to older chipsets, it is much more solid and durable. PSI converters with a power of 1000W or more are also equipped with an RS485 data output. This allows you to configure numerous parameters and monitor the operation of the unit via a computer / notebook using the PSI software. (the required interface cable is included in the scope of delivery). Configuration The Offgridtec 12-1000 PSI converter is equipped with an RS485 data output, which provides you with the options for external communication and configuration: RS485 to USB interface connection cable Part no.: The interface cable, included as standard, allows you to monitor various performance parameters on a notebook or PC. In addition, the PSI 12-1500 can be conveniently configured via the free PSI-Control PC software. Performance features of the PSI 12-1500 at a glance Modern, safe design with galvanic isolation of input and output RS485 communication module for configuration via PC / notebook with free configuration software from Offgridtec Very low self-consumption in idle / stand-by, max. efficiency <> Introduction of advanced SPWM technology, output of a perfect sine wave New thermal design for optimal heat dissipation and reduced noise levels adjustable output voltage 220 / 230VAC and mains frequency 50Hz / 60 Hz via remote meter LED indicators for error status and working status Input protection: overvoltage protection, low-voltage protection Output protection: overload protection, short-circuit protection Overtemperature protection: temperature-controlled cooling and automatic shutdown in case of overtemperature Already included: High-quality battery connection cable with 1m length, RS485 to USB interface cable 1m 35mm² connection cable with M8 ring lugs Performance parameters at a glance Nominal power (continuous power / 15min power / peak power): 1200W / 1500W / 2400W Input voltage range: 10.6 to 16 Vdc Output voltage waveform: pure sine wave USB output 5VDC / 1A, RS485 communication port Significantly more efficiency thanks to the latest SPWM technology all other technical data can be found in the data sheet weight and dimensions (LxWxH): 3.9 kg at 296.3 × 231.5 × 98.5mm all other technical data can be found in the data sheet Scope of delivery: 1x Offgridtec 1-01-011090 PSI 12-1500 Sine wave voltage converter 12V 230V 1500W / 2400W 1x Set battery connection cable 1m 35mm² Red / Black 1x RS485 to USB interface cable 1x instruction manual

The Offgridtec Remote Meter (mpn 012990) is specially designed for the Offgridtec psi-pro inverters. It displays the current parameters of the inverter on an LCD screen. Various parameters can be adjusted individually. Features Dual interface design Compatible with psi-pro series With limited possibilities also compatible with psi series (for explanations see user manual) LCD screen Dynamic real-time display of system data Visual error codes - timely notification of warnings and errors ON/OFF button control to directly control the load output Intuitive user interface Easy installation Technical data Power supply: 5 V/DC LCD backlight: Yes Installation method: Surface mount Working temperature: -20°C - +60°C Dimensions mounted: 100 x 19.4 mm (diameter x height) Size mounting holes: 3.5 mm Net weight: 65 g Scope of delivery: 1x Offgridtec Remote Meter 012990 1x rs485 to rj45 cable 1x user manual

The Offgridtec PSI 12-500 (MPN 011080) is an advanced 12V 230V sine wave voltage converter with a continuous output of 400W and 500W for a maximum of 15 minutes. The unit features a 16Bit SPWM chipset, numerous protection mechanisms and galvanically isolated inputs and outputs. The input voltage range is 10.6 and 16Vdc. The converter can supply 500W for 15 minutes or 400W continuously. For short inrush currents, the PSI 12-500 delivers 1000W. Thanks to its advanced constitution, even sensitive electrical appliances can be supplied with power reliably and permanently. Advanced development of the HP voltage transformer family The PSI series is the further development of the HP voltage transformers and comes up trumps with numerous innovations and optimisations: Input and output of the PSI are galvanically isolated and the housing has an earth connection. Mains frequency (50Hz/60Hz) and output voltage (220V / 230V) can be set via a dip switch. The brand new SPWM 16-bit chipset delivers power of the highest quality and allows even very sensitive electronics to be reliably supplied with power. Compared to older chipsets, it is much more solid and durable.  PSI converters with a power of 1000W or more are also equipped with an RS485 data output. This allows you to configure numerous parameters and monitor the operation of the unit via a computer / notebook using the PSI software. (Note that the required interface cable is not included in the scope of delivery). Performance features of the PSI 12-500 at a glance modern, safe design with galvanic isolation of input and output. introduction of advanced SPWM technology, output of a perfect sine wave adjustable output voltage 220 / 230VAC and mains frequency 50Hz / 60 Hz via remote meter LED indicators for error status and working status Lower no-load consumption, max. efficiency > 92% Input protection: overvoltage protection, low-voltage protection Output protection: overload protection, short-circuit protection Overtemperature protection: temperature-controlled cooling and automatic shutdown in case of overtemperature Operable USB output 5VDC / 1A 1m 16mm² connection cable with M8 ring lugs Performance parameters at a glance Rated power (continuous power / 15min power / peak power): 400W / 500W / 1000W Input voltage range: 10.6 to 16 Vdc Communication module: none, only integrated from the 1000W class upwards You will find all other technical data in the data sheet Weight and dimensions (LxWxH): 1.7 kg at 232.2×132×74.5mm Scope of Delivery: 1x Offgridtec 1-011080 PSI 12-500 Sine wave voltage converter 12V 230V 500W / 1000W 1x Set battery connection cable 1m 16mm² Red / Black 1x Instruction manual

The Offgridtec PSI 12-1000 Smart (MPN 011085) is an advanced 12V 230V sine wave voltage converter with a continuous output of 800W and 1000W for a maximum of 15 minutes. The unit features a 16Bit SPWM chipset, numerous protection mechanisms and galvanically isolated inputs and outputs. The input voltage range is 10.6 and 16Vdc. The converter can supply 1000W for 15 minutes or 800W continuously. For short inrush currents, the PSI 12-1000 delivers 1600W. Thanks to its advanced constitution, even sensitive electrical appliances can be supplied with power reliably and permanently Advanced development of the HP voltage transformer family The PSI series is the further development of the HP voltage transformers and comes up trumps with numerous innovations and optimisations: Input and output of the PSI are galvanically isolated and the housing has an earth connection. Mains frequency (50Hz/60Hz) and output voltage (220V / 230V) can be set via a dip switch. The brand new SPWM 16-bit chipset delivers power of the highest quality and allows even very sensitive electronics to be reliably supplied with power. Compared to older chipsets, it is much more solid and durable. Configuration The Offgridtec 12-1000 PSI converter is equipped with an RS485 data output, providing you with options for external communication and configuration: RS485 to USB interface connection cable Part no.: The interface cable, included as standard, allows you to monitor various performance parameters on a notebook or PC. In addition, the PSI 12-1000 can be conveniently configured via the free PSI-Control PC software. Performance features of the PSI 12-1000 at a glance Modern, safe design with galvanic isolation of input and output RS485 communication module for configuration via PC / notebook with free configuration software from Offgridtec Very low self-consumption in idle / stand-by, max. efficiency <> Introduction of advanced SPWM technology, output of a perfect sine wave New thermal design for optimal heat dissipation and reduced noise levels adjustable output voltage 220 / 230VAC and mains frequency 50Hz / 60 Hz via remote meter LED indicators for error status and working status Input protection: overvoltage protection, low-voltage protection Output protection: overload protection, short-circuit protection Overtemperature protection: temperature-controlled cooling and automatic shutdown in case of overtemperature 1m 25mm² connection cable with M8 ring lugs Already included: High-quality battery connection cable with 1m length, RS485 to USB interface cable Performance parameters at a glance Nominal power (continuous power / 15min power / peak power): 800W / 1000W / 1600W Input voltage range: 10.6 to 16 Vdc Output voltage waveform: pure sine wave Communication module: RS485 USB output 5VDC / 1A, RS485 communication port Significantly more efficiency thanks to the latest SPWM Technology Weight and dimensions (LxWxH): 3.9 kg at 296.3 × 231.5 × 98.5mm All other technical data can be found in the data sheet Scope of delivery: 1x Offgridtec 1-01-011085 PSI 12-1000 Sine wave voltage converter 12V 230V 1000W / 1600W 1x Set battery connection cable 1m 25mm² Red / Black 1x RS485 to USB interface cable 1x Fuse for battery connection cable 1x Instruction manual

The Offgridtec psi-pro 24-3000 (mpn 012955) is an advanced 24v 230v sine wave voltage converter with a nominal power of 3000w. The device features a 16bit spwm chipset, numerous protection mechanisms and galvanically isolated inputs and outputs. The input voltage range is 21.6 - 32 VDC. For short inrush currents, the psi-pro delivers 6000w. Thanks to its advanced constitution, even sensitive electrical devices can be supplied with power reliably and permanently. Performance features of the psi-pro 24-3000 at a glance modern, safe design with galvanic isolation of input and output rs485 communication module for configuration via pc / notebook with free configuration software from Offgridtec Optional: LCD remote meter for monitoring and control Very low power consumption in idle / stand-by, max. efficiency Introduction of advanced spwm technology, output a perfect sine wave New thermal design for optimal heat dissipation and reduced noise adjustable output voltage 220 / 230VAC and mains frequency 50Hz / 60 Hz via remote meter LED indicators for error status and working status Input protection: reverse polarity protection, undervoltage, overvoltage Output protection: overload, short circuit, overheating overtemperature protection: temperature controlled cooling and automatic shutdown in case of overtemperature Already included: rs485 to usb interface cable & toggle switch for control via remote contact Configuration The Offgridtec 24-3000 psi transducer is equipped with an rs485 data output, providing you with options for external communication and configuration: rs485 to usb interface connection cable The standard included interface cable allows monitoring of various performance parameters on a notebook or pc. Furthermore, the psi 24-3000 can be configured comfortably via the free psi-Control pc software. Performance parameters at a glance Rated power / peak power 3000w / 6000W Input voltage range: 21.6 - 32 VDC Output voltage waveform: pure sine wave Communication module: rs485 usb output 5vdc / 1a, rs485 communication port significantly more efficiency thanks to latest spwm technology all other technical data can be found in the datasheet Weight and dimensions (LxWxH): 8kg at 521 x 274 x 148 mm Scope of delivery: 1x Offgridtec 1-01-012955 psi-pro 24-3000 sine wave voltage converter 1x toggle switch for remote control 1x user manual

The Offgridtec psi-pro 12-2000 (mpn 012945) is an advanced 12v 230v sine wave voltage converter with a rated power of 2000w. The device features a 16bit spwm chipset, numerous protection mechanisms and galvanically isolated inputs and outputs. The input voltage range is 10.8 - 16 vdc. For short inrush currents, the psi-pro delivers 4000w. Thanks to its advanced constitution, even sensitive electrical devices can be supplied with power reliably and permanently. Performance features of the psi-pro 12-2000 at a glance modern, safe design with galvanic isolation of input and output rs485 communication module for configuration via pc / notebook with free configuration software from Offgridtec Optional: LCD remote meter for monitoring and control Very low power consumption in idle / stand-by, max. efficiency Introduction of advanced spwm technology, output a perfect sine wave New thermal design for optimal heat dissipation and reduced noise adjustable output voltage 220 / 230VAC and mains frequency 50Hz / 60 Hz via remote meter LED indicators for error status and working status Input protection: reverse polarity protection, undervoltage, overvoltage Output protection: overload, short circuit, overheating overtemperature protection: temperature controlled cooling and automatic shutdown in case of overtemperature Already included: rs485 to usb interface cable & toggle switch for control via remote contact Configuration The Offgridtec 12-2000 psi transducer is equipped with an rs485 data output, providing you with options for external communication and configuration: rs485 to usb interface connection cable The standard included interface cable allows monitoring of various performance parameters on a notebook or pc. Furthermore, the psi 12-2000 can be configured comfortably via the free psi-Control pc software. Performance parameters at a glance Rated power / peak power 2000w / 4000W Input voltage range: 10.8 - 16 VDC Output voltage waveform: pure sine wave Communication module: rs485 usb output 5vdc / 1a, rs485 communication port significantly more efficiency thanks to latest spwm technology all other technical data can be found in the datasheet Weight and dimensions (LxWxH): 7,7kg at 420 x 231,5 x 123 mm Scope of delivery: 1x Offgridtec 1-012945 psi-pro 12-2000 sine wave voltage converter 2x Battery cable 2 AWG / 35mm² 1x toggle switch for remote control 1x user manual

The Offgridtec PSI 24-2000 (MPN 011255) is an advanced 24V 230V sine wave voltage converter with a continuous output of 1600W and 2000W for a maximum of 15 minutes. The unit features a 16Bit SPWM chipset, numerous protection mechanisms and galvanically isolated inputs and outputs. The input voltage range is 21.6 and 32Vdc. The converter can deliver 2000W for 15 minutes or 1600W continuously. For short inrush currents, the PSI 24-2000 delivers 3200W. Thanks to its advanced constitution, even sensitive electrical appliances can be supplied with power reliably and permanently Advanced development of the HP voltage transformer family The PSI series is the further development of the HP voltage transformers and comes up trumps with numerous innovations and optimisations: Input and output of the PSI are galvanically isolated and the housing has an earth connection. Mains frequency (50Hz/60Hz) and output voltage (220V / 230V) can be set via a dip switch. The brand-new SPWM 16-bit chipset delivers power of the highest quality and allows even very sensitive electronics to be reliably supplied with power. Compared to older chipsets, it is much more solid and durable. PSI converters with a power of 1000W or more are also equipped with an RS485 data output. This allows you to configure numerous parameters and monitor the operation of the unit via a computer / notebook using the PSI software. (the required interface cable is included in the scope of delivery). Configuration The Offgridtec 12-1000 PSI converter is equipped with an RS485 data output, which provides you with the options for external communication and configuration: -RS485 to USB interface connection cable Part no.: The interface cable, included as standard, allows you to monitor various performance parameters on a notebook or PC. In addition, the PSI 24-2000 can be conveniently configured via the free PSI-Control PC software. Performance features of the PSI 24-2000 at a glance modern, safe design with galvanic isolation of input and Output RS485 communication module for configuration via PC / notebook with free configuration software from Offgridtec Very low self-consumption in idle / stand-by, max. efficiency <> Introduction of advanced SPWM technology, output of a perfect sine wave New thermal design for optimal heat dissipation and reduced noise Levels adjustable output voltage 220 / 230VAC and mains frequency 50Hz / 60 Hz via remote meter LED indicators for error status and working Status Input protection: overvoltage protection, low-voltage protection Output protection: overload protection, short circuit protection Overtemperature protection: temperature-controlled cooling and automatic shutdown in case of overtemperature Already included: High-quality battery connection cable with 1m length, RS485 to USB interface cable Performance parameters at a glance -Nominal power (continuous power / 15min power / peak power): 1600W / 2000W / 3200W -Input voltage range: 21.6 to 32 Vdc -Output voltage waveform: pure sine wave -Communication module: RS485 -USB output 5VDC / 1A, RS485 communication port -Significantly more efficiency thanks to the latest SPWM technology -all other technical data can be found in the data sheet -Weight and dimensions (LxWxH): 4.6 kg at 326.5 × 231.5 × 98.5mm Scope of delivery: 1x Offgridtec 1-01-0155 PSI 24-2000 Sine wave voltage converter 24V 230V 2000W / 3200W 1x Set battery connection cable 1m 25mm² Red / Black 1x RS485 to USB interface cable 1x instruction manual

The Offgridtec psi-pro 12-3000 (mpn 012950) is an advanced 12v 230v sine wave voltage converter with a rated power of 3000w. The device features a 16bit spwm chipset, numerous protection mechanisms and galvanically isolated inputs and outputs. The input voltage range is 10.8 - 16 vdc. For short inrush currents, the psi-pro delivers 6000w. Thanks to its advanced constitution, even sensitive electrical devices can be supplied with power reliably and permanently. Performance features of the psi-pro 12-3000 at a glance modern, safe design with galvanic isolation of input and output rs485 communication module for configuration via pc / notebook with free configuration software from Offgridtec Optional: LCD remote meter for monitoring and control Very low power consumption in idle / stand-by, max. efficiency Introduction of advanced spwm technology, output a perfect sine wave New thermal design for optimal heat dissipation and reduced noise adjustable output voltage 220 / 230VAC and mains frequency 50Hz / 60 Hz via remote meter LED indicators for error status and working status Input protection: reverse polarity protection, undervoltage, overvoltage Output protection: overload, short circuit, overheating overtemperature protection: temperature controlled cooling and automatic shutdown in case of overtemperature Already included: rs485 to usb interface cable & toggle switch for control via remote contact Configuration The Offgridtec 12-3000 psi-pro transducer is equipped with an rs485 data output, providing you with options for external communication and configuration: rs485 to usb interface connection cable The standard included interface cable allows the monitoring of various performance parameters on a notebook or pc. Furthermore, the psi 12-3000 can be configured comfortably via the free psi-Control pc software. Performance parameters at a glance Rated power / peak power 3000w / 6000W Input voltage range: 10.8 - 16 VDC Output voltage waveform: pure sine wave Communication module: rs485 usb output 5vdc / 1a, rs485 communication port significantly more efficiency thanks to latest spwm technology all other technical data can be found in the datasheet Weight and dimensions (LxWxH): 10,5kg at 557 x 231,5 x 123 mm Scope of delivery: 1x Offgridtec 1-012950 psi-pro 12-3000 sine wave voltage converter 1x toggle switch for remote control 1x user manual