The Smart Battery Sense Long Range from victron Energy (mpn sbs050150200) is a wireless battery voltage and temperature sensor for many victron chargers and solar chargers or device combinations. The Battery Sense Long Range is identical in construction to the standard version. Only the transmission power has been increased, which now allows up to 10m distance between battery and charger instead of 3m. With a voltage and temperature sensor, the batteries are charged better, the charging efficiency is improved and the life expectancy of your batteries is extended, since a permanent adjustment of the charging voltage to the battery temperature takes place Features of the Smart Battery Sense avoids errors due to voltage loss caused by cable resistance 10m signal range ensures the correct charging voltage wireless communication with the victron solar charge controllers via the Smart Network works with 12v, 24v and 48v batteries The charging of the battery is improved By measuring the voltage directly at the terminals of the battery bank, errors caused by a loss of voltage due to cable resistance are avoided. In this way, the correct charging voltage is ensured For lead-acid batteries, the battery temperature data is used to adjust the charging voltages: cold batteries require a higher charging voltage, while hot batteries require a lower charging voltage. For lithium batteries, the temperature data is used to interrupt charging when the batteries are too cold: Charging lithium batteries at temperatures around freezing or below will permanently damage the cells wireless communication The connection between the Smart Battery Sense and one or more solar chargers is wireless. A vE.Smart Network is used - a wireless technology based on the Bluetooth Smart function. The transmitted data can be used simultaneously by one, two or more solar charger(s) connected to the same 12 v, 24 v or 48 v battery bank. The Smart Network is set up using the victronConnect app the installation: neat, simple, smart Installation is simple, quick and neat. Simply attach the device's two cable lugs to the battery terminals and mount the Smart Battery Sense device directly on the battery with its self-adhesive strip Scope of delivery: 1x victron Energy sbs050150200 Smart Battery Sense Long Range 1x instruction manual

The Smart BatteryProtect 12/24v-65a from victron Energy (mpn bpr065022000) offers solid battery protection for 12v and 24v batteries of various types. Compared to the previous series, the Smart version has an integrated Bluetooth module that connects the Smart BatteryProtect (bp-65) to a smartphone or tablet. This allows you to program all the necessary on/off thresholds or set the appropriate value from 9 predefined thresholds. The BatteryProtect 12/24v can also be used as a charge interrupter between the battery charger and a lithium battery. A wide operating voltage range of 6-35 v make the device universally applicable. The possibility to connect an external switch or alarm to the BatteryProtect makes the bp-65 Smart the perfect battery monitor. Features of the Smart BatteryProtect 12v/24v-65A 65A maximum switching capacity For 12v and 24v batteries with automatic detection of the voltage range of the battery bank Explosion protection through integrated MOSFET switches that replace the relays, reducing the risk of sparking to zero integrated Bluetooth module, optionally disengageable freely programmable switch-on and switch-off thresholds, easily and wirelessly via the victronConnect app alternative programming and status display of settings possible via seven-segment display integrated alarm output, 9 predefined thresholds selectable external alarm, led or relay can be connected to the alarm output via relay the load shedding of the bp can be controlled by external events, which can not be programmed in this way Output for delayed alarm The alarm output is activated when the battery voltage drops below the preset value for shutdown for more than 12 seconds. Therefore, turning on the engine will not activate the alarm. The alarm output is a short-circuit protected open collector output connected to the negative (minus) rail. Max. Current 50 mA. The alarm output is normally used to activate an audible signal, led or relay. solid battery protection for any type of battery With its multiple configuration options, the Smart bp-65 is the perfect protection device for your battery, ensuring maximum lifetime, because most voltage converters or charge controllers have undervoltage protection, but this only intervenes at already quite low values which are usually in the range of 10.5v / 21v. The higher this cut-off threshold, the longer you will enjoy your batteries, which are usually quite costly. Selection of the shutdown threshold Depending on the battery type, there are different minimum battery voltages that must be maintained in order not to damage the battery. For AGM/Gel batteries we recommend to set the Batteryprotect to 11,5v cutoff threshold. For lithium batteries (LifePo4) 12.0v cut-off threshold is recommended. Depending on the purpose of the battery, it may be necessary to change these limits. Manufacturers also give different specifications for their batteries. Therefore, always check with the battery manufacturer which shutdown threshold is the right one for your battery! Scope of delivery: 1x victron Energy bpR065022000 Smart BatteryProtect 12/24v 65A 1x user manual

The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which  would damage the battery) or before it has insufficient power left to crank the engine.12/24V auto rangingThe BatteryProtect automatically detects system voltageProgramming made easyThe BatteryProtect can be set to engage / disengage at several different voltages.The seven segment display will indicate which setting has been chosen.A special setting for Li-ion batteriesIn this mode the Battery Protect can be controlled by the VE.Bus BMS.Ultra low current consumptionThis is important in case of Li-ion batteries, especially after low voltage shutdown.Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.Over voltage protectionTo prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16 V respectively 32 V.Ignition proofNo relays but MOSFET switches, and therefore no sparks.Delayed alarm outputThe alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50mA. The alarm output is typically used to activate a buzzer, LED or relay.Delayed load disconnect and delayed reconnectThe load will be disconnected 90 secondsafter the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.The load  will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

The Smart BatteryProtect 12v/24v-100a from victron Energy (mpn bpr110022000) offers solid battery protection for 12v and 24v batteries of various types. Compared to the previous series, the smart version has an integrated Bluetooth module that connects the Smart BatteryProtect (bp-100) to a smartphone or tablet. This allows you to program all the necessary on/off thresholds or set the appropriate value from 9 predefined thresholds. The BatteryProtect 12/24v can also be used as a charge interrupter between the battery charger and a lithium battery. A wide operating voltage range of 6-35 v make the device universally applicable. The possibility to connect an external switch or alarm to the BatteryProtect make the bp-100 Smart the perfect battery monitor. Features of the Smart BatteryProtect 12/24v-100A 100A maximum switching capacity For 12v and 24v batteries with automatic detection of the voltage range of the battery bank Explosion protection through integrated MOSFET switches that replace the relays, reducing the risk of sparking to zero integrated Bluetooth module, optionally disengageable freely programmable switch-on and switch-off thresholds, easily and wirelessly via the victronConnect app alternative programming and status display of settings possible via seven-segment display integrated alarm output, 9 predefined thresholds selectable external alarm, led or relay can be connected to the alarm output via relay the load shedding of the bp can be controlled by external events, which can not be programmed in this way Output for delayed alarm The alarm output is activated when the battery voltage drops below the preset value for shutdown for more than 12 seconds. Therefore, turning on the engine will not activate the alarm. The alarm output is a short-circuit protected open collector output connected to the negative (minus) rail. Max. Current 50 mA. The alarm output is normally used to activate an audible signal, led or relay. solid battery protection for any type of battery With its multiple configuration options, the Smart bp-100 is the perfect protection device for your battery, ensuring maximum lifetime, because most voltage converters or charge controllers have undervoltage protection, but this only intervenes at already quite low values which are usually in the range of 10.5v / 21v. The higher this cut-off threshold, the longer you will enjoy your batteries, which are usually quite costly. Selection of the shutdown threshold Depending on the battery type, there are different minimum battery voltages that must be maintained in order not to damage the battery. For AGM/Gel batteries we recommend to set the Batteryprotect to 11,5v cutoff threshold. For lithium batteries (LifePo4) 12.0v cut-off threshold is recommended. Depending on the purpose of the battery, it may be necessary to change these limits. Manufacturers also give different specifications for their batteries. Therefore, always check with the battery manufacturer which shutdown threshold is the right one for your battery! Scope of delivery: 1x victron Energy bpR110022000 Smart BatteryProtect 12/24v 100A 1x user manual

Battery ‘fuel gauge’, time-to-go indicator, and much moreThe remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account.Next to the basic display options, such as voltage, current and ampere-hours consumed, the BMV-700 series also displays state of charge, time to go, and power consumption in Watts.Easy to installAll electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2m); no other components needed.Also included are a separate front bezel for a square or round display appearance,a securing ring for the rear mounting and screws for the front mounting.Easy to programA quick install menu and a detailed setup menu with scrolling texts assistthe user when going through the various settings. Alternatively, choose the fast and easy solution: download the smartphone app (Bluetooth Smart dongle needed)Standard features- Battery voltage, current, power, ampere- hours consumed and state of charge- Remaining time at the current rate of discharge- Programmable visual and audible alarm- Programmable relay, to turn off non critical loads or to run a generator when needed- 500 Amp quick connect shunt and connection kit- Shunt selection capability up to 10.000 Amps- VE.Direct communication port- Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health- Wide input voltage range: 9,5 – 95V- High current measurement resolution: 10 mA (0,01A)- Low current consumption: 2,9Ah per month (4mA) @12V and 2,2 Ah per month (3mA) @ 24VResolution & Accuracy (with a  500 A shunt)Current  ± 0,01 AVoltage  ± 0,01 VAmp hours  ± 0,1 AhState of charge(0-100%)  ± 0,1 %Time to go ± 1 minAccuracy of current measurement  ± 0,4 %Accuracy of voltage measurement  ± 0,3 %Standards Safety  EN 60335- 1Emission / Immunity EN 55014- 1 / EN 55014- 2Automotive  ECE R10-4 / EN 50498Accessories  Shunt (included)  500A/50 mV

The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which  would damage the battery) or before it has insufficient power left to crank the engine.12/24V auto rangingThe BatteryProtect automatically detects system voltageProgramming made easyThe BatteryProtect can be set to engage / disengage at several different voltages.The seven segment display will indicate which setting has been chosen.A special setting for Li-ion batteriesIn this mode the Battery Protect can be controlled by the VE.Bus BMS.Ultra low current consumptionThis is important in case of Li-ion batteries, especially after low voltage shutdown.Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.Over voltage protectionTo prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16 V respectively 32 V.Ignition proofNo relays but MOSFET switches, and therefore no sparks.Delayed alarm outputThe alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50mA. The alarm output is typically used to activate a buzzer, LED or relay.Delayed load disconnect and delayed reconnectThe load will be disconnected 90 secondsafter the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.The load  will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

The Victron Battery-Protect bp-220 (mpn bpr122022000) disconnects the battery from the less important loads before it is completely discharged (which would damage it) or before it no longer has enough power to start the engine, etc. In addition, the bp series has overvoltage protection that shuts down the load at 16v, or 32v battery voltage and prevents damage. The bp supports agm, lead acid, gel and lithium batteries. 6 different shutdown thresholds adjustable The battery protect is very flexible can be set to different shutdown voltages. The following shutdown thresholds can be activated on the device: 10.5v / 21v, 10v / 20v, 9.5v / 19v, 11.25v / 22.5v, 11.5v / 23v,11.8v 23.6V In addition, there are different reset thresholds that you can choose for most of the shutdown thresholds. This device is the perfect protection for your battery and ensures maximum lifetime, because most voltage converters or charge controllers have an undervoltage protection, but this intervenes only at quite low values which are usually in the range of 10.5v / 21v. The higher this cut-off threshold, the longer you will enjoy your batteries, which are usually quite costly. Selection of the shutdown threshold Depending on the battery type, there are different minimum battery voltages that must be maintained in order not to damage the battery. For AGM/Gel batteries we recommend to set the Batteryprotect to 11,5v cutoff threshold. For lithium batteries (LifePo4) 12.0v cut-off threshold is recommended. Depending on the purpose of the battery, it may be necessary to change these limits. Manufacturers also give different specifications for their batteries. Therefore, always check with the battery manufacturer which shutdown threshold is the right one for your battery! Summary of essential product features For 12v and 24v batteries with automatic detection of the voltage range of the battery bank 6 different cutoff voltages selectable 220a maximum continuous current Easy programming and status display of settings via seven-segment display Extra mode for lithium batteries - in this mode the bp can be controlled by the VE.Bus bms very low power consumption Explosion protection by integrated MOSFET switches which replace the relays and reduce the risk of sparking to zero integrated alarm output Output for delayed alarm The alarm output is activated when the battery voltage drops below the preset value for shutdown for more than 12 seconds. Therefore, turning on the engine will not activate the alarm. The alarm output is a short-circuit protected open collector output connected to the negative (minus) rail. Max. Current 50 mA. The alarm output is normally used to activate an audible signal, led or relay. Load disconnection and reconnection delay The load is disconnected 90 seconds after the alarm is activated. If the battery voltage rises again to the threshold for connection within this period (after the motor has been started, for example), the load will not be disconnected. The load is reconnected 30 seconds after the battery voltage exceeds the specified voltage value for reconnection. Scope of delivery: 1x Victron bpR122022000 bp-220 battery protection 220a 12v 24v 1x instruction manual

The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which  would damage the battery) or before it has insufficient power left to crank the engine.12/24V auto rangingThe BatteryProtect automatically detects system voltageProgramming made easyThe BatteryProtect can be set to engage / disengage at several different voltages.The seven segment display will indicate which setting has been chosen.A special setting for Li-ion batteriesIn this mode the Battery Protect can be controlled by the VE.Bus BMS.Ultra low current consumptionThis is important in case of Li-ion batteries, especially after low voltage shutdown.Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.Over voltage protectionTo prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16 V respectively 32 V.Ignition proofNo relays but MOSFET switches, and therefore no sparks.Delayed alarm outputThe alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50mA. The alarm output is typically used to activate a buzzer, LED or relay.Delayed load disconnect and delayed reconnectThe load will be disconnected 90 secondsafter the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.The load  will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

The Victron Energy Battery Balancer MPN BBA000100100 is a charge equalizer for 24V and 48V battery banks. It equalizes the charge level of two serially connected 12V batteries or several parallely connected battery strings. This prevents damages on the battery caused by imbalanced charging levels. The problem: The life-span of an expensive battery bank can be reduced drastically by imbalanced charge levelsA battery with slightly increased leakage current within a 24V or 48V bank consisting of several serially/parallely connected batteries may cause an insufficient charging of parallely connected batteries or an overload of serially connected ones. Moreover new cells or batteries should have the same charge level when connected in series. Small differences can be smoothed out during constant voltage phase or equalizing charge. Bigger differences however lead to damages. Reason for that is excessive gas development through an overload (batteries with higher initial charge) and sulfating caused by insufficient charging (batteries with lower initial charge). The solution: battery balancing with the Victron Battery BalancerThe battery balancer equalizes the charge level of two serially connected 12V batteries or of several parallely connected battery strings. If the charging voltage of a 24V-system exceeds 27.3V the battery balancer compares the charge level of both batteries (serial). It drains power (up to 0.7A) from the battery (or battery string) with the higher voltage. The consequent difference between the charging currents leads to a balanced charge level of all connected batteries or battery strings.If necessary several battery balancers can be connected parallely.A 48V battery bank can be equalized with 3 battery balancers. LED DisplayGreen: on (battery voltage >27.3V)Orange: lower battery circle active (deviation >0.1V)Orange: upper battery circle active (deviation >0.1V)Red: Alarm (deviation >0.2V) Active until deviation falls back under 0.14V or system voltage drops to 26.6V or less Alarm-RelayOpen by default. Shuts close when red LED turns on, opens when red LED turns off Resetting alarmThere are two sockets two connect a push button. If both sockets are connected the realy is reset"Reset" remains until the alarm is over. After that the relay shuts close again. Delivery scope:1x Victron BBA000100100 Battery Balancer1x manual

Der Smart BatteryProtect 48/100 von Victron Energy (MPN BPR110048000) bietet soliden Batterieschutz für 48 V Akkus verschiedenster Bauart. Im Vergleich zur Vorgänger-Serie verfügt die Smart-Version über ein integriertes Bluetooth-Modul, dass den Smart BatteryProtect (SBP 48/100) mit einem Smartphone oder Tablet verbindet. So können Sie sämtliche erforderlichen Ein-/Abschalt-Schwellte programmieren oder aus 9 vordefinierten Schwellwerten den passenden Wert einstellen. Der BatteryProtect 48/100 lässt sich zudem als Lade-Unterbrecher zwischen Batterieladegerät und einer Lithium-Batterie verwenden. Eine breiter Betriebsspannungsbereich von 24 - 70 V machen das Gerät universell einsetzbar. Die Möglichkeit einen externen Schalter oder Alarm an den BatteryProtect anzuschließen machen den SBP 48/100 Smart zum perfekten Batteriewächter. Leistungsmerkmale des Smart BatteryProtect 48/100 100 A maximale Schaltleistung Für 48 V Batterien mit automatischer Erkennung des Spannungsbereichs der Batteriebank Explosionsschutz durch integrierte MOSFET-Schalter, die die Relais ersetzen und damit die Gefahr von Funkenbildung auf Null reduzieren integriertes Bluetooth-Modul, wahlweise abschaltbar frei programmierbare Ein- und Abschaltschwellen, einfach und drahtlos über die VictronConnect App alternative Programmierung und Statusanzeige der Einstellungen über Siebensegmentanzeige möglich integrierter Alarmausgang, 9 vordefinierte Schwellwerte wählbar am Alarm-Ausgangkann ein externer Alarm, eine LED oder ein Relais angeschlossen werden via Relais lässt sich der Lastabwurf des BP durch externe Ereignisse steuern, die so nicht programmiert werden können Ausgang für verzögerten Alarm Der Alarm-Ausgang wird dann aktiviert, wenn die Batteriespannung mehr als 12 Sekunden lang unter den voreingestellten Wert zum Abschalten fällt. Das Einschalten des Motors aktiviert daher den Alarm nicht. Der Alarm-Ausgang ist ein kurzschlussgeschützter offener Kollektor-Ausgang, der mit der negativen (Minus-) Schiene verbunden ist. Max. Strom 50 mA. Der Alarm-Ausgang wird normalerweise dazu verwendet, um ein akustisches Signal, eine LED oder ein Relais zu aktivieren. solider Batterieschutz für jeden Batterie-Typ Durch seine vielfältigen Konfigurationsmöglichkeiten ist der Smart SBP 48/100 die perfekte Schutzeinrichtung für Ihre Batterie und sorgt so für eine maximale Lebenszeit, denn die meisten Spannungwandler oder Laderegler haben zwar einen Unterspannungschutz, dieser greift jedoch erst bei schon ziemlich niedrigen Werten. Je höher diese Abschaltschwelle liegt, desto länger werden Sie Freude an Ihren Batterien haben, die in der Regel doch ziemlich kostenintensiv sind. Auswahl der Abschaltschwelle Je nach Batterietyp gelten verschiedene Mindestbatteriespannungen die eingehalten werden müssen um die Batterie nicht zu beschädigen. Für AGM/Gel Batterien empfehlen wir den Batteryprotect auf 11,5V Abschaltschwelle einzustellen. Für Lithiumbatterien (LifePo4) sind 12,0V Abschaltschwelle empfohlen. Je nach Einsatzzweck der Batterie kann es ggf. notwendig sein diese Grenzen zu verändern. Auch die Hersteller machen unterschiedliche Angaben zu Ihren Batterien. Informieren Sie sich daher immer beim Batteriehersteller welche Abschaltschwelle für Ihre Batterie die Richtige ist! Lieferumfang: 1x Victron Energy BPR110048000 Smart BatteryProtect SBP 48/100 100A 1x Bedienungsanleitung

Battery ‘fuel gauge’, time-to-go indicator, and much moreThe remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account.Next to the basic display options, such as voltage, current and ampere-hours consumed, the BMV-700 series also displays state of charge, time to go, and power consumption in Watts.The BMV-702 features an additional input which can be programmed to measure the voltage (of a second battery), battery temperature or midpoint voltage (see below).Bluetooth SmartUse the Bluetooth Smart dongle to monitor your batteries on Apple or Android smartphones, tablets, macbooks and other devices.Easy to installAll electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2m); no other components needed.Also included are a separate front bezel for a square or round display appearance, a securing ring for the rear mounting and screws for the front mounting.Easy to program (with your smartphone!)A quick install menu and a detailed setup menu with scrolling texts assist the user when going through the various settings. Alternatively, choose the fast and easy solution: download the smartphone app (Bluetooth Smart dongle needed)Midpoint voltage monitoring (BMV-702 only)This feature, which is often used in industry to monitor large and expensive battery banks, is now for the first time made available at a low cost, to monitor any battery bank.A battery bank consists of a string of series connected cells. The midpoint voltage is the voltage halfway along the string. Ideally, the midpoint voltage would be exactly half of the total voltage. In practice, however, deviations will be seen, that depend on many factors such as a different state of charge for new batteries or cells, different temperatures, internal leakage currents, capacities and much more.Large or increasing deviation of the midpoint voltage, points to improper battery care or a failed battery or cell. Corrective action following a midpoint voltage alarm can prevent severe damage to an expensive battery. Please consult the BMV manual for more information.Standard features Battery voltage, current, power, ampere hours consumed and state of charge Remaining time at the current rate of discharge Programmable visual and audible alarm Programmable relay, to turn off non critical loads or to run a generator when needed 500 Amp quick connect shunt and connection kit Shunt selection capability up to 10.000 Amps VE.Direct communication port Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health Wide input voltage range: 9,5 –95V High current measurement resolution: 10 mA (0,01A) Low current consumption: 2,9Ah per month (4mA) @12V and 2,2Ah per month (3mA) @ 24V BMV-702 additional featuresAdditional input to measure voltage (of a second battery), temperature or midpoint voltage, and corresponding alarm and relay settings.BMV-700HS: 60 to 385VDC voltage rangeNo additional parts needed. Note: suitable for systems with grounded minus only (battery monitor is not isolated from shunt).Other battery monitoring options VE.Net Battery Controller High voltage VE.Net Battery Controller: 70 to 350VDC Lynx Shunt VE.Net Lynx Shunt VE.Can More about midpoint voltageOne bad cell or one bad battery can destroy a large, expensive battery bank. When batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. Please see the BMV manual, section 5.2, for more information.We recommend the Votronic Battery Balancer (BMS012201000) to maximize service life of series-connected batteries.

victron bmv Smart 712 battery monitor The bmv 712 Smart from victron Energy (mpn bam030712000r) is the latest battery computer in the bmv family. It provides very precise data on parameters such as battery voltage, current, power, ampere hours consumed, state of charge and remaining runtime at the current discharge rate. The measurement resolution is very accurate and precise compared to similar products, and it is equipped with an integrated Bluetooth module that allows you to access many functions and status reports of the battery computer via a free app. Main features of the victron Smart bmv 712 battery monitor integrated Bluetooth - The Smart bmv 712 is ready for the "Internet of Things" thanks to integrated Bluetooth. In the meantime, in addition to the bmv 712, numerous other victron articles also have the integrated Bluetooth module. networking, evaluation and configuration have never been as convenient as they are today free app victronConnect - The victronConnect app enables you to evaluate and configure all victron products with vE.Direct interface. Depending on the device, numerous parameters can be evaluated directly via cell phone, computer or tablet. options for data logging and data export are also available. So you always know relatively quickly how your system is doing simplest installation - All electrical connections are made with the PCB connector on the current shunt. The shunt is connected to the Wachter via a standard rj12 telephone cable. Included: rj 12 cable (10 m) and battery cable with fuse (2 m); no other components are required. also included are a separate front bezel fu¨r a square or round display; a safety ring for rear mounting and screws for front mounting huge range of functions - Numerous battery monitoring functions and generously sized electronic components on the Smart bmv's circuit board allow you to gain deep insight into the life of your battery. In addition, the bmv allows you to detect and fix problems, even in larger battery banks, before damage occurs other features of the bmv 712 battery computer Programmable visual and audible alarm Programmable relay to disconnect insignificant loads or switch on a generator if required A 500 amp quick connect shunt and connection kit Shunt capacity selectable up to 10,000 amps vE.Direct communication port Stores a wide range of history data that can be used to evaluate usage patterns and battery condition Wide input voltage range: 6.5 - 70v High current measurement resolution 10 ma (0.01 a) Additional input for measuring voltage (of a second battery), temperature or midpoint voltage and associated alarm and relay settings high-resolution measurement data from up to 2 batteries Current ± 0.01a Voltage ± 0.01 v ampere-hour ± 0.1 ah State of charge (0 - 100%) ± 0.1% Remaining time ± 1 min Temperature (0 - 50°C or 30 - 120°F) ± 1°C/°F Accuracy of current measurement ± 0.4% low self-consumption The bmv's power consumption is only 0.7 ah per month (1 ma) at 12 v and 0.6 ah per month (0.8 ma) at 24 v. Lithium-ion batteries in particular have almost no capacity left when they are discharged to the point of shutdown due to low voltage After shutdown due to low voltage, the reserve capacity of a lithium-ion battery is approximately 1 ah per 1000 ah of battery capacity. The battery will be damaged if the remaining reserve capacity is drawn from the battery. For example, a residual current of 10 ma can damage a 200 ah battery if the system is left in a discharged state for over 8 days intelligent: Monitoring the midpoint voltage One damaged cell or battery can destroy an entire large, expensive battery bank. If batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. Please also refer to the bmv manual, section 5.2 for more information victron recommends the Battery Balancer (bms012201000) to maximize the life of lead-acid batteries connected in series Scope of delivery: 1x victron bmv Smart 712, battery monitor 1x shunt (included) 500 a / 50 mv 1x 10 meter 6 wire UTP cable with rj12 connectors, and cable with fuse for the '+' connection

TheBatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.Programming made easyThe BatteryProtect can be set to engage / disengage at several different voltages.The sevensegment display will indicate which setting has been chosen.A special setting for Li-ion batteriesIn this mode the Battery Protect can be controlled by the VE.Bus BMS.Ultra-low current consumptionThis is important in case of Li-ion batteries, especially after low voltage shutdown.Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.Over voltage protectionTo prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 64V.Ignition proofNo relays but MOSFET switches, and therefore no sparks.Delayed alarm outputThe alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50mA. The alarm output is typically used to activate a buzzer, LED or relay.Delayed load disconnect and delayed reconnectThe load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

The Lynx Smart bms from Victron Energy (mpn lyn034160200) is a dedicated battery management system for lithium smart batteries from Victron. It includes a positive and negative busbar, a bms, a circuit breaker, and a battery monitor. The Lynx Smart bms is part of the Lynx modular distribution system. Features Built-in 500a circuit breaker, for fallback protection Battery monitor, with which the state of charge in percent and other data are displayed Alarm relay: provides a warning before the system shuts down Status and Bluetooth LED Communication via Bluetooth with VictronConnect app Communication via VE.Can with GX device Incl. two VE.Can rj45 terminators Technical data Supply voltage range: 9-58 VDC Supported system voltages: 12, 24 or 48V Reverse polarity protection: yes Main safety protection continuous current: 500a continuous Peak current main safety protection: 600a for 5 minutes Power consumption in active mode: approx. 2.6w (200mA at 13V) Operating temperature range: -40°C - +60°C Protection class: IP22 Dimensions: 190 x 180 x 80 mm Weight: 2 kg The Lynx distribution system The Lynx Distribution System is a modular busbar system that includes DC connections, distribution, fuse, battery monitoring and/or lithium battery management. The Lynx Distribution System consists of the following parts: Lynx Power In - A positive and negative busbar with 4 connections for batteries or DC devices Lynx Distributor - A positive and negative busbar with 4 fused terminals for batteries or DC equipment together with fuse monitoring Lynx Shunt VE.Can - A positive busbar with space for a main system fuse and a negative busbar with a shunt for battery monitoring. It has VE.Can communication for monitoring and setup in a GX device Lynx Smart bms - For use with Victron Energy Smart lithium batteries. It includes a positive bus bar with a circuit breaker driven by a battery management system and a negative bus bar with a shunt for battery monitoring. It has Bluetooth communication for monitoring and setup via the VictronConnect app and VE.Can communication for monitoring with a GX device and the VRM portal Scope of delivery: 1x Victron Energy Lynx Smart bms (lyn034160200) 2x rj45 VE.Can terminating resistors 1x user manual

The CAN bus temperature sensor from Victron Energy (mpn ass000200100) is a battery temperature sensor for the Buck Boost DC/DC converter series and an important accessory when they are connected to an LFP lithium battery. Temperature sensing is required when LFP lithium batteries are charged at low temperatures. The charging current of a lithium battery must be reduced when the battery temperature drops below 5 degrees and the charging current must be stopped when the temperature drops below zero degrees. The CAN bus temp. sensor takes care of this. It measures the temperature of the lithium battery and sends it to the buck-boost DC/DC converter. The buck-boost DC/DC converter reduces or stops the charging process when the battery temperature becomes too low. In addition, the sensor can also be connected to the temperature sensor port of a Multi or Quattro so that the Multi or Quattro can reduce or stop charging when the battery temperature is too low. Features Battery temperature monitoring Supply voltage 4.38 V/DC Current consumption 60 mA (at 13.6 V) Output for heavy user shutdown (frequent user) LED status indicators CAN.bus for control purposes and down/up converter or Quattro, MultiPlus and Venus GX communication Alarm output Functionality The CAN.bus temperature sensor is an accessory designed specifically for all models of buck-boost DC-DC converters. The temperature is transmitted to the converter via a communication cable through the CAN bus communication ports. The CAN.Bus temperature sensor can also be used in combination with any Victron Multi or Quattro. This allows the charging voltage to be controlled according to the low temperature. For LiFePO4 lithium systems, this sensor is required in many system applications due to the fact that LiFePO4 batteries must not be charged when they are too cold. Charging lithium batteries at or around freezing will cause permanent damage to the cells. Technical data Supply voltage: 4.36 V/DC Current consumption: 60 mA (at 13.6V) Alarm output (pole 5): 350 mA Open connection (switches to GND/earth) Weight: 12 gram Dimensions: 57.6 x 40 x 15.8 mm (incl. connectors) Scope of delivery: 1x Victron Can-Bus temperature sensor (mpn ass000200100) 1x instruction manual