BMV Batteriemonitore
- Batteries
- Electronics
- Generators
- Installation
- Complete Systems
-
Brands
- AEconversion
- Bluetti
- BYD
- Canadian Solar
- EcoFlow
- EFOY
- Fothermo
- Growatt
- Hoymiles
- Huawei
- JA Solar
- Jinko Solar
- Kemo
- Lapp
- Longi
- Luxen Solar
- Mastervolt
- Offgridtec
- Pylontech
- Pytes
- Risen
- Steca
- Trina Solar
- Victron Energy
- Votronic
- Wattstone
- Wieland Electric
- Yingli
- Zendure
Filter
–
BMV Batteriemonitore
2 Results
Sorting
VAT-exempt delivery possible*
1-67-008675
Victron Batterie Monitor BMV-702 Black
Battery ‘fuel gauge’, time-to-go indicator, and much moreThe remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account.Next to the basic display options, such as voltage, current and ampere-hours consumed, the BMV-700 series also displays state of charge, time to go, and power consumption in Watts.The BMV-702 features an additional input which can be programmed to measure the voltage (of a second battery), battery temperature or midpoint voltage (see below).Bluetooth SmartUse the Bluetooth Smart dongle to monitor your batteries on Apple or Android smartphones, tablets, macbooks and other devices.Easy to installAll electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2m); no other components needed.Also included are a separate front bezel for a square or round display appearance, a securing ring for the rear mounting and screws for the front mounting.Easy to program (with your smartphone!)A quick install menu and a detailed setup menu with scrolling texts assist the user when going through the various settings. Alternatively, choose the fast and easy solution: download the smartphone app (Bluetooth Smart dongle needed)Midpoint voltage monitoring (BMV-702 only)This feature, which is often used in industry to monitor large and expensive battery banks, is now for the first time made available at a low cost, to monitor any battery bank.A battery bank consists of a string of series connected cells. The midpoint voltage is the voltage halfway along the string. Ideally, the midpoint voltage would be exactly half of the total voltage. In practice, however, deviations will be seen, that depend on many factors such as a different state of charge for new batteries or cells, different temperatures, internal leakage currents, capacities and much more.Large or increasing deviation of the midpoint voltage, points to improper battery care or a failed battery or cell. Corrective action following a midpoint voltage alarm can prevent severe damage to an expensive battery. Please consult the BMV manual for more information.Standard features
Battery voltage, current, power, ampere
hours consumed and state of charge
Remaining time
at the current rate of discharge
Programmable visual and audible alarm
Programmable relay, to turn off non critical loads or
to run a generator when needed
500 Amp quick connect shunt and connection kit
Shunt selection capability up to 10.000 Amps
VE.Direct communication port
Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health
Wide input voltage range: 9,5 –95V
High current measurement resolution: 10 mA (0,01A)
Low current consumption: 2,9Ah per month (4mA) @12V and 2,2Ah per month (3mA) @ 24V
BMV-702 additional featuresAdditional input to measure voltage (of a second battery), temperature or midpoint voltage, and corresponding alarm and relay settings.BMV-700HS: 60 to 385VDC voltage rangeNo additional parts needed. Note: suitable for systems with grounded minus only (battery monitor is not isolated from shunt).Other battery monitoring options
VE.Net Battery Controller
High voltage VE.Net Battery Controller: 70 to 350VDC
Lynx Shunt VE.Net
Lynx Shunt VE.Can
More about midpoint voltageOne bad cell or one bad battery can destroy a large, expensive battery bank. When batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. Please see the BMV manual, section 5.2, for more information.We recommend the Votronic Battery Balancer (BMS012201000) to maximize service life of series-connected batteries.
Battery ‘fuel gauge’, time-to-go indicator, and much moreThe remaining battery capacity depends on the ampere-hours consumed, discharge current, tempe...
Shipped in 10-14 Werktage
Shipped in 10-14 Werktage
1-67-008675
Victron Batterie Monitor BMV-702 Black
VAT-exempt delivery possible*
Battery ‘fuel gauge’, time-to-go indicator, and much moreThe remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account.Next to the basic display options, such as voltage, current and ampere-hours consumed, the BMV-700 series also displays state of charge, time to go, and power consumption in Watts.The BMV-702 features an additional input which can be programmed to measure the voltage (of a second battery), battery temperature or midpoint voltage (see below).Bluetooth SmartUse the Bluetooth Smart dongle to monitor your batteries on Apple or Android smartphones, tablets, macbooks and other devices.Easy to installAll electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2m); no other components needed.Also included are a separate front bezel for a square or round display appearance, a securing ring for the rear mounting and screws for the front mounting.Easy to program (with your smartphone!)A quick install menu and a detailed setup menu with scrolling texts assist the user when going through the various settings. Alternatively, choose the fast and easy solution: download the smartphone app (Bluetooth Smart dongle needed)Midpoint voltage monitoring (BMV-702 only)This feature, which is often used in industry to monitor large and expensive battery banks, is now for the first time made available at a low cost, to monitor any battery bank.A battery bank consists of a string of series connected cells. The midpoint voltage is the voltage halfway along the string. Ideally, the midpoint voltage would be exactly half of the total voltage. In practice, however, deviations will be seen, that depend on many factors such as a different state of charge for new batteries or cells, different temperatures, internal leakage currents, capacities and much more.Large or increasing deviation of the midpoint voltage, points to improper battery care or a failed battery or cell. Corrective action following a midpoint voltage alarm can prevent severe damage to an expensive battery. Please consult the BMV manual for more information.Standard features
Battery voltage, current, power, ampere
hours consumed and state of charge
Remaining time
at the current rate of discharge
Programmable visual and audible alarm
Programmable relay, to turn off non critical loads or
to run a generator when needed
500 Amp quick connect shunt and connection kit
Shunt selection capability up to 10.000 Amps
VE.Direct communication port
Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health
Wide input voltage range: 9,5 –95V
High current measurement resolution: 10 mA (0,01A)
Low current consumption: 2,9Ah per month (4mA) @12V and 2,2Ah per month (3mA) @ 24V
BMV-702 additional featuresAdditional input to measure voltage (of a second battery), temperature or midpoint voltage, and corresponding alarm and relay settings.BMV-700HS: 60 to 385VDC voltage rangeNo additional parts needed. Note: suitable for systems with grounded minus only (battery monitor is not isolated from shunt).Other battery monitoring options
VE.Net Battery Controller
High voltage VE.Net Battery Controller: 70 to 350VDC
Lynx Shunt VE.Net
Lynx Shunt VE.Can
More about midpoint voltageOne bad cell or one bad battery can destroy a large, expensive battery bank. When batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. Please see the BMV manual, section 5.2, for more information.We recommend the Votronic Battery Balancer (BMS012201000) to maximize service life of series-connected batteries.
Shipped in 10-14 Werktage
VAT-exempt delivery possible*
8-04-001155
Battery Monitor Victron BWV-700 9 - 90V DC
Battery ‘fuel gauge’, time-to-go indicator, and much moreThe remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account.Next to the basic display options, such as voltage, current and ampere-hours consumed, the BMV-700 series also displays state of charge, time to go, and power consumption in Watts.Easy to installAll electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2m); no other components needed.Also included are a separate front bezel for a square or round display appearance,a securing ring for the rear mounting and screws for the front mounting.Easy to programA quick install menu and a detailed setup menu with scrolling texts assistthe user when going through the various settings. Alternatively, choose the fast and easy solution: download the smartphone app (Bluetooth Smart dongle needed)Standard features- Battery voltage, current, power, ampere- hours consumed and state of charge- Remaining time at the current rate of discharge- Programmable visual and audible alarm- Programmable relay, to turn off non critical loads or to run a generator when needed- 500 Amp quick connect shunt and connection kit- Shunt selection capability up to 10.000 Amps- VE.Direct communication port- Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health- Wide input voltage range: 9,5 – 95V- High current measurement resolution: 10 mA (0,01A)- Low current consumption: 2,9Ah per month (4mA) @12V and 2,2 Ah per month (3mA) @ 24VResolution & Accuracy (with a 500 A shunt)Current ± 0,01 AVoltage ± 0,01 VAmp hours ± 0,1 AhState of charge(0-100%) ± 0,1 %Time to go ± 1 minAccuracy of current measurement ± 0,4 %Accuracy of voltage measurement ± 0,3 %Standards Safety EN 60335- 1Emission / Immunity EN 55014- 1 / EN 55014- 2Automotive ECE R10-4 / EN 50498Accessories Shunt (included) 500A/50 mV
Battery ‘fuel gauge’, time-to-go indicator, and much moreThe remaining battery capacity depends on the ampere-hours consumed, discharge current, tempe...
Shipped in 1-3 days
Shipped in 1-3 days
8-04-001155
Battery Monitor Victron BWV-700 9 - 90V DC
VAT-exempt delivery possible*
Battery ‘fuel gauge’, time-to-go indicator, and much moreThe remaining battery capacity depends on the ampere-hours consumed, discharge current, temperature and the age of the battery. Complex software algorithms are needed to take all these variables into account.Next to the basic display options, such as voltage, current and ampere-hours consumed, the BMV-700 series also displays state of charge, time to go, and power consumption in Watts.Easy to installAll electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2m); no other components needed.Also included are a separate front bezel for a square or round display appearance,a securing ring for the rear mounting and screws for the front mounting.Easy to programA quick install menu and a detailed setup menu with scrolling texts assistthe user when going through the various settings. Alternatively, choose the fast and easy solution: download the smartphone app (Bluetooth Smart dongle needed)Standard features- Battery voltage, current, power, ampere- hours consumed and state of charge- Remaining time at the current rate of discharge- Programmable visual and audible alarm- Programmable relay, to turn off non critical loads or to run a generator when needed- 500 Amp quick connect shunt and connection kit- Shunt selection capability up to 10.000 Amps- VE.Direct communication port- Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health- Wide input voltage range: 9,5 – 95V- High current measurement resolution: 10 mA (0,01A)- Low current consumption: 2,9Ah per month (4mA) @12V and 2,2 Ah per month (3mA) @ 24VResolution & Accuracy (with a 500 A shunt)Current ± 0,01 AVoltage ± 0,01 VAmp hours ± 0,1 AhState of charge(0-100%) ± 0,1 %Time to go ± 1 minAccuracy of current measurement ± 0,4 %Accuracy of voltage measurement ± 0,3 %Standards Safety EN 60335- 1Emission / Immunity EN 55014- 1 / EN 55014- 2Automotive ECE R10-4 / EN 50498Accessories Shunt (included) 500A/50 mV
Shipped in 1-3 days
BMV Batteriemonitore
Die Aufgabe der Victron Energy Batteriecomputer ist die Anzeige wichtiger Batteriekennzahlen wie Restlaufzeit, aktueller Stromverbrauch, Stromzähler usw. Die BMV Batterieüberwachung ist Mikroprozessor gesteuert und speichert auch wichtige Verlaufsdaten zur Analyse ab. Dank des integrierten VE.Direct Ports können die Daten auch am Notebook oder Smartphone betrachtet werden (optional). Der 702 Black kann zusätzliche eine zweite Batteriebank kontrollieren und beherrscht die Überwachung der Mittelspannung.