The Smart Battery Sense Long Range from victron Energy (mpn sbs050150200) is a wireless battery voltage and temperature sensor for many victron chargers and solar chargers or device combinations. The Battery Sense Long Range is identical in construction to the standard version. Only the transmission power has been increased, which now allows up to 10m distance between battery and charger instead of 3m. With a voltage and temperature sensor, the batteries are charged better, the charging efficiency is improved and the life expectancy of your batteries is extended, since a permanent adjustment of the charging voltage to the battery temperature takes place Features of the Smart Battery Sense avoids errors due to voltage loss caused by cable resistance 10m signal range ensures the correct charging voltage wireless communication with the victron solar charge controllers via the Smart Network works with 12v, 24v and 48v batteries The charging of the battery is improved By measuring the voltage directly at the terminals of the battery bank, errors caused by a loss of voltage due to cable resistance are avoided. In this way, the correct charging voltage is ensured For lead-acid batteries, the battery temperature data is used to adjust the charging voltages: cold batteries require a higher charging voltage, while hot batteries require a lower charging voltage. For lithium batteries, the temperature data is used to interrupt charging when the batteries are too cold: Charging lithium batteries at temperatures around freezing or below will permanently damage the cells wireless communication The connection between the Smart Battery Sense and one or more solar chargers is wireless. A vE.Smart Network is used - a wireless technology based on the Bluetooth Smart function. The transmitted data can be used simultaneously by one, two or more solar charger(s) connected to the same 12 v, 24 v or 48 v battery bank. The Smart Network is set up using the victronConnect app the installation: neat, simple, smart Installation is simple, quick and neat. Simply attach the device's two cable lugs to the battery terminals and mount the Smart Battery Sense device directly on the battery with its self-adhesive strip Scope of delivery: 1x victron Energy sbs050150200 Smart Battery Sense Long Range 1x instruction manual

Victron Energy ASS030571018 1.8m RS485 to USB interface cable for use with ET current meters and CCGX.

The gx Touch 50 display from Victron Energy (mpn bpp900455050) is the display accessory for the Cerbo gx communication center. The 5-inch touchscreen display provides an instant overview of your system and allows you to make adjustments on the fly. The display connects easily to Cerbo gx via a cable. Its super-slim, waterproof design and easy installation offer plenty of flexibility. Features of the gx Touch 50 5-inch touchscreen display Instant system overview Easy mounting from above Connection via cable The complement to the Cerbo gx The gx Touch 50 display is the ideal complement to get the most out of your Cerbo gx communication center. Access it directly via gx Touch 50 using Bluetooth capability to optimize your system and make changes easily and quickly. Scope of delivery: 1x gx Touch 50 display 1x HDMI-USB connection cable 1x mounting material

Victron Energy ASS030571018 1.8m RS485 to USB interface cable for use with ET current meters and CCGX.

The Victron MPPT Control (MPN SCC900500000) is a solar computer / remote panel that enables you to cofigure and analyze every BlueSolar MPPT charge controller (except the 75/15) with integrated VE.Direct-port.This panel makes configuration and monitoring of your charge controller and its performance parameters more comfortable and easier. Extensive display and control optionsThe MPPT Control provides a wide range of data and values that allow the user a deep look into the charge controller's operation performance. It is not only possible to see the current data but also historical ones which are saved for 30 days in the device's internal storage. Besides current and historical performance data this panel offers even more: the internal storage also holds information about the length of single charging modes like "bulk", "absorption" and "float". This is unique in this price class! Displayed values in Live-Status mode solar module performance in W solar module voltage in V daily output in kWh current charging mode: (OFF, FAULT, BULK, ASORPTION and FLOAT) charging-and discharging current of the battery errors (only when errors occur) battery voltage consumer output status ON/OFF (only on BlueSolar MPPTs with consumer output) consumption on consumer output (only on BlueSolar MPPTs with consumer output) Historical data (30 days) total output in kWh max. module voltage max. battery voltage min. battery voltage last errors Displayed values in 24h-mode daily time exposure for bulk mode daily time exposure for absorption mode daily time exposure for float mode min. battery voltage 24h max. battery voltage 24h max. solar voltage 24h last error Equipment neededTo connect the MPPT Control to your BlueSolar MPPT you need a VE.Direct connection cable - of course also available in our shop. Different ways of installation for the MPPT ControlWith help of the included mounting frame the MPPT Control can be installed directly into a control panel or terminal box. Optionally there is also an according wall-mounting bracket.No matter which of these options you chose a professional high-quality look is guaranteed. Delivery scope:1x Victron SCC900500000 MPPT Control

The gx Touch 70 Display from Victron Energy (mpn bpp900455070) is the display accessory for the Cerbo gx communications center. The 7-inch touchscreen display provides an instant overview of your system and allows you to make adjustments on the fly. The display connects easily to Cerbo gx via a cable. Its super-slim, waterproof design and easy installation offer plenty of flexibility. Features of the gx Touch 70 7 inch touchscreen display Instant system overview Easy mounting from above Connection via cable The complement to the Cerbo gx The gx Touch 70 display is the ideal complement to get the most out of your Cerbo gx communication center. Access it directly via gx Touch 70 using Bluetooth capability to optimize your system and make changes easily and quickly. Scope of delivery: 1x gx Touch 70 display 1x HDMI-USB connection cable 1x mounting material

The Victron Digital Multi Control Panel (MPN DMC000200010R) is a remote control panel for MultiPlus and Quattro inverters and grounds on the VE.Bus-technology. It allows the configuration of PowerControl and PowerAssist power-limitation for two AC-sources, for example generator or shore-power. Setting range: up to 200A.Moreover it can be used as on-/off-switch for connected devices. The LEDs' luminosity is reduced automatically during night-time. The DMC is a remote control panel for als Multis or Quattros and for all systems where a Multi or Quattro is integrated. This includes single devices, parallel operation and multiphase-operation.It supports either VE.Bus-systems but also systems without it. The DMC allows the separate adjustment of generator- and shore-power. When installed in an extended VE.Bus-system up to four different shore-power sources can be adjusted.Within a VE.Bus-system the DMC will choose the right setting range for your system automatically. Delivery scope:1x Victron DMC000200010R Digital Multi Control Panel for Multiplus and Quattro inverters1x Manual

The gx Touch 70 wall mount bracket from Victron Energy (mpn bpp900465070) makes it easy to mount the gx Touch 70 display panel on a solid wall. No drilling or cutting is required for mounting, except for the three screws used to mount the wall bracket to the wall. Weight: 0.12 kg Incl. 3 mounting screws Scope of delivery: 1x Victron gx Touch 70 wall bracket 3x mounting screws

Color Control GXThe Color Control (CCGX) provides intuitive control and monitoring for all products connected to it. The list of Victron products that can be connected is endless: Inverters, Multis, Quattros, all our latest MPPT solar chargers, BMV-700, BMV-600, Lynx Ion+ Shuntand more. VRM Online PortalBesides monitoring and controlling products on the CCGX, the information is also forwarded to the free remote monitoring website: the VRM Online Portal. To get an impression of the VRM Online Portal, visit https://vrm.victronenergy.com, and try the demo. See also the screenshots in the datasheet.Future functionalityThe CCGX has endless possibilities. To implement all the ideas and wishes will take years. There are therefore many features that are not yet available. Functions marked with ‘Future function’ will become available later on, as a firmware update. Firmware updates are free of charge, as with all updates of Victron products. Updating the product is easy: the CCGX will update itself automatically, as long as it is connected to the internet. Manual updates can be done with a USB stick and microSD cards.Supported products Multis and Quattros, including split phase and three-phase systems. Monitoring and control (on/off and current limiter). Changing settings is not yet available. BlueSolar MPPT 150/70 and the MPPT 150/85. Current solar output is visible on the overview screen, and all parameters are logged to the VRM online portal. Note that the VRM App has a nice overview showing data of the BlueSolar MPPT 150/70 as well. When multiple BlueSolar MPPTs with VE.Can are used in parallel, the Color Control will show all information as one. BlueSolar MPPT Solar Chargers with a VE.Direct port (70/15, 75/15, 100/15, 100/30, 75/50, 100/50, 150/35) can be connected to the VE.Direct ports on the CCGX. Connecting multiple at the same time is possible. They will all appear as a separate Solar Charger in the device list. BMV-700 family can be connected directly to the VE.Direct ports on the CCGX. Use the VE.Direct Cable for this. BMV-600 family can be connected to the VE.Direct ports on the CCGX. Use the VE.Direct to BMV60xS cable for that. Lynx Ion + Shunt Lynx Shunt VE.Can Skylla-i NMEA2000 tank sensors A USB GPS can be connected to the USB port. Location and speed will be visible on the display, and the data is sent to the VRM Portal for tracking purposes. The map on VRM will show the latest position. WiFi USB.  Note that there are more options for products which use the VE.Direct ports, such as BMVs and small MPPTs. They can also be connected through USB, useful when more than two products need to be connected. Use an off-the-shelf USB-hub and the VE.Direct to USB interface, ASS030530000.Other highlightsWhen connected to the internet, the CCGX will update itself automatically when there is a new software version available.Multiple languages: English, Chinese, German, Italian, Spanish, French, Swedish and Dutch.Use the CCGX as a Modbus-TCP gateway to all connected Victron products.Notes for existing VGR2 and VER usersOpposite to the Victron Global Remote 2 (VGR2) and Victron Ethernet Remote (VER), the CCGX stores all data locally during network interruptions. As soon as the connection to the VRM Online Portal is restored, it will automatically send all backlogged data to the portal. Data can then be analysed on https://vrm.victronenergy.com. The local website, as present on the VER, is not yet supported.The CCGX has no internal GPRS modem: you cannot insert a sim-card into the CCGX. Use an off-the-shelf GPRS or 3G router instead.

The Victron Energy Venus gx system control module (mpn bpp900400100) provides intuitive operation and monitoring of all power systems based on Victron components. It is particularly suitable as the heart of an ess (Energy Storage System). In terms of functionality, the Venus gx is similar to the Color Control gx from Victron, but without a display and without a built-in modem, but much cheaper. It transmits all system data to the free vrm portal from Victron, from where you can monitor and administer your power system worldwide. In addition to the power electronics, tank levels of up to 3 tanks can be monitored and visualized in the vrm portal. besides remote monitoring of the connected devices, remote configuration is also possible. Remote Console on the vrm Setup and monitoring is done via the remote console. Either via the vrm, via the built-in WiFi access point or via the local LAN/WiFi network. Automatic genset start/stop A highly flexible start/stop system. Use of charge, voltage, load and even more parameters. Specific settings for rest periods and optionally a monthly test run can be set. Internet connection The Venus gx can be connected to the Internet with an Ethernet cable and via Wi-Fi. The Venus gx does not have an internal cellular modem: there is no slot for a sim card. Use a commercially available gprs or 3 g router instead. Tank level indicator inputs The inputs for the tank level indicator are resistive: connect them to a resistive tank transmitter. Such tank transmitters are not offered by Victron. The ports of the tank level indicator can each be configured to work with European tank transmitters (0 - 180 ohms), or with US tank transmitters (240 - 30 ohms). Data logging If the system is connected to the internet, all data is sent to the vrm portal. If no internet connection is available, the Venus gx stores the data internally for up to 48 hours. By inserting a micro SD card or a usb stick, even more data can be stored. These files can be uploaded to the vrm portal or converted offline for analysis using the VictronConnect app. further highlights The Venus gx can automatically update itself via the Internet when a new software version is available. Multiple languages: English, Czech, German, Spanish, French, Italian, Dutch, Russian, Swedish, Turkish, Chinese, Arabic. Use the Venus gx as a Modbus TCP gateway to all connected Victron products. Linux os based operating system supported products Multis and quattros, including split-phase and three-phase systems. monitoring and control (on/off and current limiter). Configuration change is possible (only remotely via internet, not without internet connection). BlueSolar mppt solar chargers with a VE.Direct port. BlueSolar mppt 150/70 and the mppt 150/85 with VE.Can port. When multiple BlueSolar mppts with VE.Can are used in Parallel connection, all information is combined in one. devices of the bmv-700 family can be connected directly to the VE.Direct ports on the Venus gx. Use The VE.Direct cable for this purpose. bmv-600 family devices can be connected to the VE.Direct ports on the Venus gx. An additional cable is required. Lynx Ion + Shunt Lynx Ion BMS Lynx Shunt VE.Can Skylla-i Battery Chargers NMEA2000 tank sensors A usb gPS can be connected to the usb port. The data is sent to the vrm portal for traceability. The map on the vrm then shows the most recent position. Fronius PV inverter Scope of delivery: 1x Victron bpp900400100 Venus gx system control module 1x user manual

The Victron Digital Multi Control Panel (MPN DMC000200010R) is a remote control panel for MultiPlus and Quattro inverters and grounds on the VE.Bus-technology. It allows the configuration of PowerControl and PowerAssist power-limitation for two AC-sources, for example generator or shore-power. Setting range: up to 200A.Moreover it can be used as on-/off-switch for connected devices. The LEDs' luminosity is reduced automatically during night-time. The DMC is a remote control panel for als Multis or Quattros and for all systems where a Multi or Quattro is integrated. This includes single devices, parallel operation and multiphase-operation.It supports either VE.Bus-systems but also systems without it. The DMC allows the separate adjustment of generator- and shore-power. When installed in an extended VE.Bus-system up to four different shore-power sources can be adjusted.Within a VE.Bus-system the DMC will choose the right setting range for your system automatically. Delivery scope:1x Victron DMC000200010R Digital Multi Control Panel for Multiplus and Quattro inverters1x Manual

The 2g 3g gsm outdoor antenna from Victron Energy (mpn gsm900100100) can be used with the gx gsm modem as a replacement for the modem's indoor gsm antenna. The outdoor antenna provides better reception than the standard gx gsm antenna supplied with the modem and has also been designed for outdoor use Features of outdoor 2g and 3g gsm antenna compatible with the Victron gx gsm modem suitable for outdoor mounting Support for 2g and 3g Scope of delivery: 1x Victron Energy gsm900100100 2g 3g gsm outdoor antenna 1x user manual

The Active gps antenna from Victron Energy (mpn gsm900200100) is an accessory for the gx gsm modem. It enables the use of the gps receiver integrated in the gx gsm. This actively provides data about the current location or movement speed. Features of the active gps antenna from Victron Accessory part for the Victron gx gsm modem for using the integrated gps receiver in the gx gsm modem active gps antenna Scope of delivery: 1x Victron Energy gsm900200100 Active gps antenna 1x user manual

The Skylla-i Control gx Remote Panel Victron Energy (mpn rec000300000r) is a control panel that can be used to adjust the charging current of a Skylla-i battery charger. The second main function of the panel is to display the system status The Skylla-i panel is a remote control panel designed to operate with all Skylla-i charger models. The Skylla-i charger uses the ve.can bus. Connecting the Skylla-i Panel to your Skylla-i Charger is quite simple. Connect the two devices with a normal utp (Unshielded Twisted Pair) cable (cable with unshielded pairs) with two rj45 connectors. Check that the two rj45 bus terminating connectors are present at both ends. The Skylla-i panel is supplied complete with both rj45 bus terminators. Both the Skylla-i charger and the panel have two rj45 jacks that are internally connected. You can connect the cable to either of the sockets. Functions of the Skylla-i Control gx controllable parameters of the Skylla-i Control gx During normal charging operation, the rotary knob can be used to cycle through the following parameters: Charge current Battery voltage Input current Input Current Limit The LEDs on the control panel have different functions. What the flashing sequences mean can be found in the German operating instructions Switching the Skylla-i charger on and off The Skylla-i charger is switched on and off by briefly pressing the on/off button. Note that the main power switch on the charger is predominant. If this is switched off on the charger, it can no longer be switched on through the panel. Setting the charger input current limit The input current limit can be changed by pressing and releasing the rotary knob. The input current limit is then automatically selected if it was not already activated. Next, the current input current limit appears on the screen. It flashes. By turning the rotary knob, the value of the input current limitation can be changed. To confirm the new value, either wait for a few seconds or briefly press the rotary knob. Scope of delivery: 1x Victron Energy rec000300000r Skylla-i Control gx Remote Panel 1x installation manual

Der Victron Shunt 500A - 50mV (MPN SHU065150050) wird für Strommessgeräte mit analogen oder digitalen Anzeigeinstrumenten benötigt, denn diese werden in der Regel über eine Messung, einer sehr kleinen Spannung an einem Shunt realisiert. Im Fall der Victron Smartshunts IP65 500A – 2000A sind es 50mV. Dabei gilt: umso kleiner die Messspannung an den Shunts ist desto geringer sind die Auswirkungen auf den restlichen Stromkreis des Systems. Mit 50mV liefert dieser einen exzellenten Wert. Unterschiede zum BMV-712 Batteriemonitor Keine sichtbare oder akustische Alarme (Alarme sind nur sichtbar über die VictronConnect App oder eine GX Einheit) Kein programmierbares Relais Schutzklasse IP65 Ob Sie für Ihr Anzeigegerät einen Shunt benötigen erfahren Sie in der Anleitung des jeweiligen Geräts. Lieferumfang 1x Victron SHU065150050 Smartshunt 500A - 50mV IP65

The gx gsm is a cellular modem from Victron Energy (mpn gsm100100) for Internet provisioning in locations where a regular Internet connection is not available. It is compatible with the Octo gx, Venus gx and Color Control gx and is designed to connect the local system to the Victron Remote Management (vrm) system. Operation requires an active standard SIM card that plugs directly into the gx gsm modem. The connection to the respective gx system is made via a supplied 1m usb cable. A small indoor gsm antenna is included as standard. Optionally there is also an active gsm outdoor antenna with 2 or 3 g support from Victron. gx gsm also has an integrated gPS receiver Besides the internet, the gx gsm also has a gPS receiver. To use this, purchase the optional active gsm antenna. (part number gsm900100100). Features of the gx gsm modem includes integrated gPS receiver (requires optional gPS antenna) for internet provisioning via SIM card includes 2g 3g indoor antenna compatible with the Octo gx, Venus gx and the Color Control gx important notice: The gx gsm only provides internet connection for the above gx system control units: So there is no way to share the internet with laptops, phones, or other devices. For installations where more devices need the internet, e.g. a yacht or a motorhome, you should install a mobile router instead. More information here Scope of delivery: 1x Victron Energy gsm100100 gx gsm modem1x 2g 3g indoor gsm antenna1x 1m usb connection cable1x user manual