Argofet Insulators
- Batteries
- Electronics
- Generators
- Installation
- Complete Systems
-
Brands
- AEconversion
- Bluetti
- BYD
- Canadian Solar
- EcoFlow
- EFOY
- Fothermo
- Growatt
- Hoymiles
- Huawei
- JA Solar
- Jinko Solar
- Jokari
- Kemo
- Lapp
- Longi
- Luxen Solar
- Mastervolt
- myStrom
- Offgridtec
- Pylontech
- Pytes
- Risen
- Steca
- Trina Solar
- Victron Energy
- Votronic
- Wattstone
- Wieland Electric
- Yingli
- Zendure
Filter
–
Argofet Insulators
4 Results
Sorting
8-67-009270
Victron Argo FET 100-3 100A Battery FET-Isolator
The Victron Argo FET-isolator 100-3 (MPN ARG100201020R) allows the supply of 3 separate battery circuits with up to 100A charging current via one power source. This source can be the alternator or a charger.
As the single battery banks are not connected it is not possible that they discharge or affect each other. The difference between isolators and FET-isolators is that FET-isolators barely generate any voltage losses and therefore are much more efficient.
Features:
max. charging current of 100A and connectors for 3 battery circuits
with 0.02V at low and 0.1V on high currents there is only a very small voltage loss which makes a compensating voltage increase unnecessary
proven Victron quality with a guarantee of 5 years
Only small voltage lossesCompared to common isolators there are only very small voltage losses with FET-isolators - only 0.02V at low and 0.1V on high currents. With Argo FET-isolators there is no voltage increase necessary. You should still keep an eye on short cable lengths and sufficient cable diameters.
Example: A current of 100A at a cable length of 10m and 50m² cable diameter has a voltage loss of 0.26V. At a cable of 5m and 10mm² a 50A-current generates a loss of 0.35V! That's why FET-isolators belong to the most efficient charging current distributors on the market.
Delivery scope:1x Victron ARG100301020R FET 100-3 FET Isolator 100A for 3 batteries
The Victron Argo FET-isolator 100-3 (MPN ARG100201020R) allows the supply of 3 separate battery circuits with up to 100A charging current via one powe...
Shipped in 1-3 days
Shipped in 1-3 days
8-67-009270
Victron Argo FET 100-3 100A Battery FET-Isolator
The Victron Argo FET-isolator 100-3 (MPN ARG100201020R) allows the supply of 3 separate battery circuits with up to 100A charging current via one power source. This source can be the alternator or a charger.
As the single battery banks are not connected it is not possible that they discharge or affect each other. The difference between isolators and FET-isolators is that FET-isolators barely generate any voltage losses and therefore are much more efficient.
Features:
max. charging current of 100A and connectors for 3 battery circuits
with 0.02V at low and 0.1V on high currents there is only a very small voltage loss which makes a compensating voltage increase unnecessary
proven Victron quality with a guarantee of 5 years
Only small voltage lossesCompared to common isolators there are only very small voltage losses with FET-isolators - only 0.02V at low and 0.1V on high currents. With Argo FET-isolators there is no voltage increase necessary. You should still keep an eye on short cable lengths and sufficient cable diameters.
Example: A current of 100A at a cable length of 10m and 50m² cable diameter has a voltage loss of 0.26V. At a cable of 5m and 10mm² a 50A-current generates a loss of 0.35V! That's why FET-isolators belong to the most efficient charging current distributors on the market.
Delivery scope:1x Victron ARG100301020R FET 100-3 FET Isolator 100A for 3 batteries
Shipped in 1-3 days
8-67-009280
Victron Argo FET 200-3 200A Battery FET-Isolator
The Victron Argo FET-isolator 200-3 (MPN ARG200301020R) allows the supply of 3 separate battery circuits with up to 200A charging current via one power source. This source can be the alternator or a charger.
As the single battery banks are not connected it is not possible that they discharge or affect each other. The difference between isolators and FET-isolators is that FET-isolators barely generate any voltage losses and therefore are much more efficient.
Features:
max. charging current of 200A and connectors for 3 battery circuits
with 0.02V at low and 0.1V on high currents there is only a very small voltage loss which makes a compensating voltage increase unnecessary
proven Victron quality with a guarantee of 5 years
Only small voltage lossesCompared to common isolators there are only very small voltage losses with FET-isolators - only 0.02V at low and 0.1V on high currents. With Argo FET-isolators there is no voltage increase necessary. You should still keep an eye on short cable lengths and sufficient cable diameters.
Example: A current of 100A at a cable length of 10m and 50m² cable diameter has a voltage loss of 0.26V. At a cable of 5m and 10mm² a 50A-current generates a loss of 0.35V! That's why FET-isolators belong to the most efficient charging current distributors on the market.
Delivery scope:1x Victron ARG200201020R FET 200-3 FET Isolator 200A for 3 batteries
The Victron Argo FET-isolator 200-3 (MPN ARG200301020R) allows the supply of 3 separate battery circuits with up to 200A charging current via one powe...
Shipped in 10-14 Werktage
Shipped in 10-14 Werktage
8-67-009280
Victron Argo FET 200-3 200A Battery FET-Isolator
The Victron Argo FET-isolator 200-3 (MPN ARG200301020R) allows the supply of 3 separate battery circuits with up to 200A charging current via one power source. This source can be the alternator or a charger.
As the single battery banks are not connected it is not possible that they discharge or affect each other. The difference between isolators and FET-isolators is that FET-isolators barely generate any voltage losses and therefore are much more efficient.
Features:
max. charging current of 200A and connectors for 3 battery circuits
with 0.02V at low and 0.1V on high currents there is only a very small voltage loss which makes a compensating voltage increase unnecessary
proven Victron quality with a guarantee of 5 years
Only small voltage lossesCompared to common isolators there are only very small voltage losses with FET-isolators - only 0.02V at low and 0.1V on high currents. With Argo FET-isolators there is no voltage increase necessary. You should still keep an eye on short cable lengths and sufficient cable diameters.
Example: A current of 100A at a cable length of 10m and 50m² cable diameter has a voltage loss of 0.26V. At a cable of 5m and 10mm² a 50A-current generates a loss of 0.35V! That's why FET-isolators belong to the most efficient charging current distributors on the market.
Delivery scope:1x Victron ARG200201020R FET 200-3 FET Isolator 200A for 3 batteries
Shipped in 10-14 Werktage
8-67-009275
Victron Argo FET 200-2 200A Battery FET-Isolator
The Victron Argo FET-isolator 200-2 (MPN ARG200201020R) allows the supply of 2 separate battery circuits with up to 200A charging current via one power source. This source can be the alternator or a charger.
As the single battery banks are not connected it is not possible that they discharge or affect each other. The difference between isolators and FET-isolators is that FET-isolators barely generate any voltage losses and therefore are much more efficient.
Features:
max. charging current of 200A and connectors for 2 battery circuits
with 0.02V at low and 0.1V on high currents there is only a very small voltage loss which makes a compensating voltage increase unnecessary
proven Victron quality with a guarantee of 5 years
Only small voltage lossesCompared to common isolators there are only very small voltage losses with FET-isolators - only 0.02V at low and 0.1V on high currents. With Argo FET-isolators there is no voltage increase necessary. You should still keep an eye on short cable lengths and sufficient cable diameters.
Example: A current of 100A at a cable length of 10m and 50m² cable diameter has a voltage loss of 0.26V. At a cable of 5m and 10mm² a 50A-current generates a loss of 0.35V! That's why FET-isolators belong to the most efficient charging current distributors on the market.
Delivery scope:1x Victron ARG200201020R FET 200-2 FET Isolator 200A for 2 batteries
The Victron Argo FET-isolator 200-2 (MPN ARG200201020R) allows the supply of 2 separate battery circuits with up to 200A charging current via one powe...
Soon available again
Soon available again
8-67-009275
Victron Argo FET 200-2 200A Battery FET-Isolator
The Victron Argo FET-isolator 200-2 (MPN ARG200201020R) allows the supply of 2 separate battery circuits with up to 200A charging current via one power source. This source can be the alternator or a charger.
As the single battery banks are not connected it is not possible that they discharge or affect each other. The difference between isolators and FET-isolators is that FET-isolators barely generate any voltage losses and therefore are much more efficient.
Features:
max. charging current of 200A and connectors for 2 battery circuits
with 0.02V at low and 0.1V on high currents there is only a very small voltage loss which makes a compensating voltage increase unnecessary
proven Victron quality with a guarantee of 5 years
Only small voltage lossesCompared to common isolators there are only very small voltage losses with FET-isolators - only 0.02V at low and 0.1V on high currents. With Argo FET-isolators there is no voltage increase necessary. You should still keep an eye on short cable lengths and sufficient cable diameters.
Example: A current of 100A at a cable length of 10m and 50m² cable diameter has a voltage loss of 0.26V. At a cable of 5m and 10mm² a 50A-current generates a loss of 0.35V! That's why FET-isolators belong to the most efficient charging current distributors on the market.
Delivery scope:1x Victron ARG200201020R FET 200-2 FET Isolator 200A for 2 batteries
Soon available again
8-67-009265
Victron Argo FET 100-2 100A Battery FET-Isolator
The Victron Argo FET-isolator 100-2 (MPN ARG100201020R) allows the supply of 2 separate battery circuits with up to 100A charging current via one power source. This source can be the alternator or a charger.
As the single battery banks are not connected it is not possible that they discharge or affect each other. The difference between isolators and FET-isolators is that FET-isolators barely generate any voltage losses and therefore are much more efficient.
Features:
max. charging current of 100A and connectors for 2 battery circuits
with 0.02V at low and 0.1V on high currents there is only a very small voltage loss which makes a compensating voltage increase unnecessary
proven Victron quality with a guarantee of 5 years
Only small voltage lossesCompared to common isolators there are only very small voltage losses with FET-isolators - only 0.02V at low and 0.1V on high currents. With Argo FET-isolators there is no voltage increase necessary. You should still keep an eye on short cable lengths and sufficient cable diameters.
Example: A current of 100A at a cable length of 10m and 50m² cable diameter has a voltage loss of 0.26V. At a cable of 5m and 10mm² a 50A-current generates a loss of 0.35V! That's why FET-isolators belong to the most efficient charging current distributors on the market.
Delivery scope:1x Victron ARG100201020R Argo FET 100-2 FET Isolator 100A for 2 batteries
The Victron Argo FET-isolator 100-2 (MPN ARG100201020R) allows the supply of 2 separate battery circuits with up to 100A charging current via one powe...
Soon available again
Soon available again
8-67-009265
Victron Argo FET 100-2 100A Battery FET-Isolator
The Victron Argo FET-isolator 100-2 (MPN ARG100201020R) allows the supply of 2 separate battery circuits with up to 100A charging current via one power source. This source can be the alternator or a charger.
As the single battery banks are not connected it is not possible that they discharge or affect each other. The difference between isolators and FET-isolators is that FET-isolators barely generate any voltage losses and therefore are much more efficient.
Features:
max. charging current of 100A and connectors for 2 battery circuits
with 0.02V at low and 0.1V on high currents there is only a very small voltage loss which makes a compensating voltage increase unnecessary
proven Victron quality with a guarantee of 5 years
Only small voltage lossesCompared to common isolators there are only very small voltage losses with FET-isolators - only 0.02V at low and 0.1V on high currents. With Argo FET-isolators there is no voltage increase necessary. You should still keep an eye on short cable lengths and sufficient cable diameters.
Example: A current of 100A at a cable length of 10m and 50m² cable diameter has a voltage loss of 0.26V. At a cable of 5m and 10mm² a 50A-current generates a loss of 0.35V! That's why FET-isolators belong to the most efficient charging current distributors on the market.
Delivery scope:1x Victron ARG100201020R Argo FET 100-2 FET Isolator 100A for 2 batteries
Soon available again