‹ back to overview page

Victron Battery Protect BP-220 12 24V 220A


(4)
sku: 1-67-008660

In stock – delivery time 1-3 Werktage

Shipping weight per item: 9.12 kg
shipping with: DHL Paket
€100.14
Incl. 19% Tax, excl. Shipping Cost
OR
Mo – Fr: 08.00 – 18.00 Uhr

Fragen oder Änderungswünsche?

Description

The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which  would damage the battery) or before it has insufficient power left to crank the engine.

12/24V auto ranging
The BatteryProtect automatically detects system voltage

Programming made easy
The BatteryProtect can be set to engage / disengage at several different voltages.
The seven segment display will indicate which setting has been chosen.

A special setting for Li-ion batteries
In this mode the Battery Protect can be controlled by the VE.Bus BMS.

Ultra low current consumption
This is important in case of Li-ion batteries, especially after low voltage shutdown.
Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.

Over voltage protection
To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16 V respectively 32 V.

Ignition proof
No relays but MOSFET switches, and therefore no sparks.

Delayed alarm output
The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50mA. The alarm output is typically used to activate a buzzer, LED or relay.

Delayed load disconnect and delayed reconnect
The load will be disconnected 90 secondsafter the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.
The load  will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

data sheet

General
SKU 1-67-008660
Manufacturer's Unit Number BPR0000220400
Product Type Batterieüberwachung (Tiefentladung)
Manufacturer Victron Energy
Weight 0,5 kg
EAN 8719076021452

eKomi ratings

13.03.2019 at 08:21
07.02.2018 at 20:32
11.11.2017 at 08:11
05.07.2017 at 10:12
5.00 / 5 stars (4 ratings)
4 of 4 customers (100%) rated this product as positive.