The Victron Phoenix Inverter C24/2000 (CIN242020000) belongs to the next generation after Victron's Phoenix 12/80-1200 series. Compared to their preceding models devices out of the compact-class come with a widely enhanced range of functions. Especially in terms of communication there are several new features which make the C24/2000 a future-proof investment that provides a constant performance of 1600W. This device converts a 12V DC battery current into a 230V AC current with a pure sine wave at 50Hz which also allows the supply of very sensitive electronic components. This inverter comes with excellent consumption and efficiency characteristics and moreover supports the parallel and three-phase operation with other Phoenix inverters out of this series. VE.Bus RS-485 communication port - extensive, new possibilities All Phoenix inverters out of the compact-series are equipped with a RS-485 data port. Via the optional VE Interface MK2-USB you can connect the inverter to a PC or notebook. This allows many new possibilities in terms of configuration and monitoring. Following some of the most important new features: individual adjustment of parameters such as output voltage, frequency, upper and lower voltage limit and much more... can be integrated in a computer-aided monitoring and control system all Phoenix inverters can also be used with VENet - Victron's innovative monitoring network - or any other computer-aided control and monitoring system easy programing of the integrated relay. The relay can be used to produce signals for special events or to start a generator, for example parallel or three-phase operation with other Phoenix inverters The main focus during the development of the new Phoenix series was to create an inverter with a clean sine output and high efficiency. Thanks to latest hybrid-HF technology Victron was able to create a high-quality product with small dimensions and low weight which provides any needed performance easily. Additionally SinusMax technology, new within this series, allows very high peak-currents of 4000W. Technical data 1600W constant output, suitable for all common 24V batteries pure sine wave (50Hz) higher peak-currents thanks to Victron's Sinus-Max technology converts 24V DC into 230V AC (pure sine wave) advanced hybrid-HF technology - more performance and less vulnerable to faults compared to common high-frequency technology very low consumption, high efficiency integrated energy-saving mode bipolar alarm contact that can be used as output for an on/off-remote control SinusMax technology The most important characteristic about this technology is a very high starting current capacity which is not possible with common HF-technology. Phoenix inverters can easily handle high starting currents of, for example, refrigerating compressors, tools and others. Nearly unlimited performance through parallel and three-phase operation: Up to six inverters can be connected parallely to increase performance. Also three-phase operation is possible. Load switch to other AC-current sources: Automatic load switch: For smaller performance demands we recommend the Filax auto-switch. With its help computers and other sensitive electronic devices can be supplied free of interruptions as the switching times are very short (<20ms). Delivery scope: 1x Victron CIN242020000 Phoenix Compact Sine Inverter C24/2000 - 24V to 230V 1600W 4000W 1x Manual  

The Victron Phoenix Inverter C24/1600 (CIN241620000) belongs to the next generation after Victron's Phoenix 12/80-1200 series. Compared to their preceding models devices out of the compact-class come with a widely enhanced range of functions.Especially in terms of communication there are several new features which make the C24/1600 a future-proof investment that provides a constant performance of 1300W. This device converts a 12V DC battery current into a 230V AC current with a pure sine wave at 50Hz which also allows the supply of very sensitive electronic components.This inverter comes with excellent consumption and efficiency characteristics and moreover supports the parallel and three-phase operation with other Phoenix inverters out of this series. VE.Bus RS-485 communication port - extensive, new possibilitiesAll Phoenix inverters out of the compact-series are equipped with a RS-485 data port. Via the optional VE Interface MK2-USB you can connect the inverter to a PC or notebook. This allows many new possibilities in terms of configuration and monitoring. Following some of the most important new features: individual adjustment of parameters such as output voltage, frequency, upper and lower voltage limit and much more... can be integrated in a computer-aided monitoring and control system all Phoenix inverters can also be used with VENet - Victron's innovative monitoring network - or any other computer-aided control and monitoring system easy programing of the integrated relay. The relay can be used to produce signals for special events or to start a generator, for example parallel or three-phase operation with other Phoenix inverters The main focus during the development of the new Phonex series was to create an inverter with a clean sine output and high efficiency. Thanks to latest hybrid-HF technology Victron was able to create a high-quality product with small dimensions and low weight which provides any needed performance easily.Additionally SinusMax technology, new within this series, allows very high peak-currents of 2400W. Technical data 1300W constant output, suitable for all common 24V batteries pure sine wave (50Hz) higher peak-currents thanks to Victron's Sinus-Max technology converts 24V DC into 230V AC (pure sine wave) advanced hybrid-HF technology - more performance and less vulnerable to faults compared to common high-frequency technology very low consumption, high efficiency integrated energy-saving mode bipolar alarm contact that can be used as output for an on/off-remote control SinusMax technologyThe most important characteristic about this technology is a very high starting current capacity which is not possible with common HF-technology.Phoenix inverters can easily handle high starting currents of, for example, refrigerating compressors, tools and others.Nearly unlimited performance through parallel and three-phase operation:Up to six inverters can be connected parallely to increase performance. Also three-phase operation is possible.Load switch to other AC-current sources:Automatic load switch: For smaller performance demands we recommend the Filax auto-switch. With its help computers and other sensitive electronic devices can be supplied free of interruptions as the switching times are very short (<20ms). Delivery scope:1x Victron CIN241620000 Phoenix Compact Sine Inverter C24/1600 - 24V to 230V 1300W 3000W1x Manual  

The Victron Phoenix Inverter C12/1600 (MPN CIN121620000) belongs to the next generation after Victron's Phoenix 12/80-1200 series. Compared to their preceding models devices out of the compact-class come with a widely enhanced range of functions.Especially in terms of communication there are several new features which make the C12/1600 a future-proof investment that provides a constant performance of 1300W. This device converts a 12V DC battery current into a 230V AC current with a pure sine wave at 50Hz which also allows the supply of very sensitive electronic components.This inverter comes with excellent consumption and efficiency characteristics and moreover supports the parallel and three-phase operation with other Phoenix inverters out of this series. VE.Bus RS-485 communication port - extensive, new possibilitiesAll Phoenix inverters out of the compact-series are equipped with a RS-485 data port. Via the optional VE Interface MK2-USB you can connect the inverter to a PC or notebook. This allows many new possibilities in terms of configuration and monitoring. Following some of the most important new features: individual adjustment of parameters such as output voltage, frequency, upper and lower voltage limit and much more... can be integrated in a computer-aided monitoring and control system all Phoenix inverters can also be used with VENet - Victron's innovative monitoring network - or any other computer-aided control and monitoring system easy programing of the integrated relay. The relay can be used to produce signals for special events or to start a generator, for example parallel or three-phase operation with other Phoenix inverters The main focus during the development of the new Phonex series was to create an inverter with a clean sine output and high efficiency. Thanks to latest hybrid-HF technology Victron was able to create a high-quality product with small dimensions and low weight which provides any needed performance easily.Additionally SinusMax technology, new within this series, allows very high peak-currents of 3000W. Technical data 1300W constant output, suitable for all common 12V batteries pure sine wave (50Hz) higher peak-currents thanks to Victron's Sinus-Max technology converts 12V DC into 230V AC (pure sine wave) advanced hybrid-HF technology - more performance and less vulnerable to faults compared to common high-frequency technology very low consumption, high efficiency integrated energy-saving mode bipolar alarm contact that can be used as output for an on/off-remote control SinusMax technologyThe most important characteristic about this technology is a very high starting current capacity which is not possible with common HF-technology.Phoenix inverters can easily handle high starting currents of, for example, refrigerating compressors, tools and others.Nearly unlimited performance through parallel and three-phase operation:Up to six inverters can be connected parallely to increase performance. Also three-phase operation is possible.Load switch to other AC-current sources:Automatic load switch: For smaller performance demands we recommend the Filax auto-switch. With its help computers and other sensitive electronic devices can be supplied free of interruptions as the switching times are very short (<20ms). Delivery scope:1x Victron CIN121620000 Phoenix Compact Sine Inverter C12/1600 - 12V auf 230V 1300W 3000W1x Manual

The Victron Phoenix Inverter C12/2000 (MPN CIN122020000) belongs to the next generation after Victron's Phoenix 12/80-1200 series. Compared to their preceding models devices out of the compact-class come with a widely enhanced range of functions.Especially in terms of communication there are several new features which make the C12/2000 a future-proof investment that provides a constant performance of 1600W. This device converts a 12V DC battery current into a 230V AC current with a pure sine wave at 50Hz which also allows the supply of very sensitive electronic components.This inverter comes with excellent consumption and efficiency characteristics and moreover supports the parallel and three-phase operation with other Phoenix inverters out of this series. VE.Bus RS-485 communication port - extensive, new possibilitiesAll Phoenix inverters out of the compact-series are equipped with a RS-485 data port. Via the optional VE Interface MK2-USB you can connect the inverter to a PC or notebook. This allows many new possibilities in terms of configuration and monitoring. Following some of the most important new features: individual adjustment of parameters such as output voltage, frequency, upper and lower voltage limit and much more... can be integrated in a computer-aided monitoring and control system all Phoenix inverters can also be used with VENet - Victron's innovative monitoring network - or any other computer-aided control and monitoring system easy programing of the integrated relay. The relay can be used to produce signals for special events or to start a generator, for example parallel or three-phase operation with other Phoenix inverters The main focus during the development of the new Phonex series was to create an inverter with a clean sine output and high efficiency. Thanks to latest hybrid-HF technology Victron was able to create a high-quality product with small dimensions and low weight which provides any needed performance easily.Additionally SinusMax technology, new within this series, allows very high peak-currents of 4000W. Technical data 1600W constant output, suitable for all common 12V batteries pure sine wave (50Hz) higher peak-currents thanks to Victron's Sinus-Max technology converts 12V DC into 230V AC (pure sine wave) advanced hybrid-HF technology - more performance and less vulnerable to faults compared to common high-frequency technology very low consumption, high efficiency integrated energy-saving mode bipolar alarm contact that can be used as output for an on/off-remote control SinusMax technologyThe most important characteristic about this technology is a very high starting current capacity which is not possible with common HF-technology.Phoenix inverters can easily handle high starting currents of, for example, refrigerating compressors, tools and others.Nearly unlimited performance through parallel and three-phase operation:Up to six inverters can be connected parallely to increase performance. Also three-phase operation is possible.Load switch to other AC-current sources:Automatic load switch: For smaller performance demands we recommend the Filax auto-switch. With its help computers and other sensitive electronic devices can be supplied free of interruptions as the switching times are very short (<20ms). Delivery scope:1x Victron CIN122020000 Phoenix Compact Sine Inverter C12/2000 - 12V auf 230V 1600W 4000W1x Manual  

The Victron Phoenix Inverter C12/1200 (MPN CIN121220000) belongs to the next generation after Victron's Phoenix 12/80-1200 series. Compared to their preceding models devices out of the compact-class come with a widely enhanced range of functions.Especially in terms of communication there are several new features which make the C12/1200 a future-proof investment that provides a constant performance of 1000W. This device converts a 12V DC battery current into a 230V AC current with a pure sine wave at 50Hz which also allows the supply of very sensitive electronic components.This inverter comes with excellent consumption and efficiency characteristics and moreover supports the parallel and three-phase operation with other Phoenix inverters out of this series. VE.Bus RS-485 communication port - extensive, new possibilitiesAll Phoenix inverters out of the compact-series are equipped with a RS-485 data port. Via the optional VE Interface MK2-USB you can connect the inverter to a PC or notebook. This allows many new possibilities in terms of configuration and monitoring. Following some of the most important new features: individual adjustment of parameters such as output voltage, frequency, upper and lower voltage limit and much more... can be integrated in a computer-aided monitoring and control system all Phoenix inverters can also be used with VENet - Victron's innovative monitoring network - or any other computer-aided control and monitoring system easy programing of the integrated relay. The relay can be used to produce signals for special events or to start a generator, for example parallel or three-phase operation with other Phoenix inverters The main focus during the development of the new Phonex series was to create an inverter with a clean sine output and high efficiency. Thanks to latest hybrid-HF technology Victron was able to create a high-quality product with small dimensions and low weight which provides any needed performance easily.Additionally SinusMax technology, new within this series, allows very high peak-currents of 2400W. SinusMax technologyThe most important characteristic about this technology is a very high starting current capacity which is not possible with common HF-technology.Phoenix inverters can easily handle high starting currents of, for example, refrigerating compressors, tools and others.Nearly unlimited performance through parallel and three-phase operation:Up to six inverters can be connected parallely to increase performance. Also three-phase operation is possible.Load switch to other AC-current sources:Automatic load switch: For smaller performance demands we recommend the Filax auto-switch. With its help computers and other sensitive electronic devices can be supplied free of interruptions as the switching times are very short (<20ms). Delivery scope:1x Victron CIN121220000 Phoenix Compact Sine Inverter C12/1200 - 12V to 230V 1000W  

The Victron Phoenix Inverter C24/1200 (CIN241220000) belongs to the next generation after Victron's Phoenix 12/80-1200 series. Compared to their preceding models devices out of the compact-class come with a widely enhanced range of functions.Especially in terms of communication there are several new features which make the C24/1200 a future-proof investment that provides a constant performance of 1000W. This device converts a 12V DC battery current into a 230V AC current with a pure sine wave at 50Hz which also allows the supply of very sensitive electronic components.This inverter comes with excellent consumption and efficiency characteristics and moreover supports the parallel and three-phase operation with other Phoenix inverters out of this series. VE.Bus RS-485 communication port - extensive, new possibilitiesAll Phoenix inverters out of the compact-series are equipped with a RS-485 data port. Via the optional VE Interface MK2-USB you can connect the inverter to a PC or notebook. This allows many new possibilities in terms of configuration and monitoring. Following some of the most important new features: individual adjustment of parameters such as output voltage, frequency, upper and lower voltage limit and much more... can be integrated in a computer-aided monitoring and control system all Phoenix inverters can also be used with VENet - Victron's innovative monitoring network - or any other computer-aided control and monitoring system easy programing of the integrated relay. The relay can be used to produce signals for special events or to start a generator, for example parallel or three-phase operation with other Phoenix inverters The main focus during the development of the new Phonex series was to create an inverter with a clean sine output and high efficiency. Thanks to latest hybrid-HF technology Victron was able to create a high-quality product with small dimensions and low weight which provides any needed performance easily.Additionally SinusMax technology, new within this series, allows very high peak-currents of 2400W. Technical data 1000W constant output, suitable for all common 24V batteries pure sine wave (50Hz) higher peak-currents thanks to Victron's Sinus-Max technology converts 24V DC into 230V AC (pure sine wave) advanced hybrid-HF technology - more performance and less vulnerable to faults compared to common high-frequency technology very low consumption, high efficiency integrated energy-saving mode bipolar alarm contact that can be used as output for an on/off-remote control SinusMax technologyThe most important characteristic about this technology is a very high starting current capacity which is not possible with common HF-technology.Phoenix inverters can easily handle high starting currents of, for example, refrigerating compressors, tools and others.Nearly unlimited performance through parallel and three-phase operation:Up to six inverters can be connected parallely to increase performance. Also three-phase operation is possible.Load switch to other AC-current sources:Automatic load switch: For smaller performance demands we recommend the Filax auto-switch. With its help computers and other sensitive electronic devices can be supplied free of interruptions as the switching times are very short (<20ms). Delivery scope:1x Victron CIN241220000 Phoenix Compact Sine Inverter C24/1200 - 24V to 230V 1000W,1x Manual