Victron Energy ASS030571018 1.8m RS485 to USB interface cable for use with ET current meters and CCGX.

Victron Energy ASS030571018 1.8m RS485 to USB interface cable for use with ET current meters and CCGX.

The gx Touch 50 wall mount bracket from Victron Energy (mpn bpp900465050) makes it easy to mount the gx Touch 50 display panel on a solid wall. No drilling or cutting is required for mounting, except for the three screws used to mount the wall bracket to the wall. Dimensions: 128.1 x 87 x 24.4 mm Weight: 0.12 kg Incl. 3 mounting screws Scope of delivery: 1x Victron gx Touch 50 wall bracket 3x mounting screws

The Victron et340 (mpn rel300300000) is a 3-phase electricity meter designed for a maximum current of 65a per phase The et340 electricity meter can be used for four different applications: Current meter and control input in an ess (home storage system) in conjunction with the Color Control gx and a Victron inverter Current measurement at the output of a PV inverter Current measurement at the output of an AC genset Wiring and connection of the et340 There are two possibilities in its wiring. One is the direct connection, via the rs485 to usb interface with 1.8m or 5m cable or alternatively the wireless connection via Zigbee. Scope of delivery: 1x Victron rel300000 et340 3-phase electricity meter 65a/phase1x user manual

The Victron et112 electricity meter 1-phase (mpn rel300100000) for a maximum current to be measured of 100a. The et112 electricity meter can be used for four different applications Electricity meter and control input in an ess (home storage system) in combination with the Color Control gx and a Victron inverter Current measurement at the output of a PV inverter Current measurement at the output of an AC genset Wiring and connection of the ETT112 There are two possibilities in its wiring. One is the direct connection, via the rs485 to usb interface with 1.8m or 5m cable or alternatively the wireless connection via Zigbee. Scope of delivery: 1x Victron rel300100000 et112 electricity meter 100A1x user manual

The ccgx WiFi Module Long Range (bpp900200100) connects your Color Control gx to a wifi network within range, providing an internet connection for the ccgx. The Startech usb300wn2x2d is the official wifi dongle recommendation from Victron for the ccgx. The dual band wireless-N USB network adapter usb300wn2x2d can be used to connect a USB-enabled computer to a WiFi network with a frequency of 2.4 gHz or 5 gHz. The adapter can be used to connect to wireless-A, b, g or N networks and features 5dBi high gain antennas as well as amplifiers to provide optimized reception for up to 300 Mbps data bandwidth over distances up to 3 times greater than a standard WiFi adapter. This versatile dual band network adapter features 2t2r (2 transmitters, 2 receivers), Multiple Input/Multiple Output (mimo), and can be used with older wireless access points (at 2.4 gHz) as well as newer WAPs that support the less congested 5 gHz range. Features of the ccgx WiFi Dongle Longe Range (Startech usb300wn2x2d) Dual band feature ensures extensive compatibility with WiFi networks operating at frequencies of 2.4 gHz or 5 gHz 5dBi high gain antennas with high power amplifiers greatly increases network reception and transmission range over standard adapters 2 transmitters/2 receivers (2x2:2) antenna configuration with MIMO support 2.4/5 gHz dual band frequency support Scope of delivery: 1x Victron Energy bpp900200100 ccgx WiFi Module Long Range 1x quick start guide