Safe shopping with solar experts
Fast Shipping
Top choice renowned brands
Customer service:
+49 (0) 8721 91994-00
Victron BlueSolar MPPT 100/15 12V 24V 15A
The Victron MPPT 100/15 (MPN SCC010015200R) is part of the BlueSolar MPPT charge controller familiy and provides ultra-fast powertracking which extends your solar system's output. Compared to the 75/15 this controller processes a higher PV-Voltage and therefore handles a 100V DC safely. Next generation MPP-tracker Especially on clouded days with changing light intensity a MPPT controler increases your system output by up to 30% compared to PWM charge controllers. Moreover the 100/15 comes with further innovative technologies. Programming, real-time data and logging Latest Apple and Android devices (smartphones, tablets,...) can be connected via VE.Direct over Bluetooth Smart Dongles and the MPPT App or via the GX Color control. Please note that the Bluetooth Smart dongle and the GX Color Control are not included in the delivery scope but available separately. Important features: Ultra-fast MPP-tracker ensures highest possible outcome even when it is cloudy Integrated VE.Direct data port for connecting devices like the Bluetooth Smart Dongle or the GX Color Control panel Suitable for 12V and 24V systems Rated charging amperage: 15A 200W max. PV-performance at 12V and 400W at 24V 15A consumer output with auto-shutdown at imminent battery undervoltage (deep discharge protection) Reverse polarity protection Multistep adaptive charging algorithm Battery charging algorithm programmable Integrated battery life algorithm extends battery life when activated and all consumers are connected to the consumer output Day/night-time control and dimming options VE.Direct data port integrated VE.Direct transfers important parameters to all devices connected to the charge controller and allows communication to equipment such as the Bluetooth Smart Dongle or the GX Color Control. The VE.Direct data port is meant for products where a full canbus integration would produce extreme costs. Please check our Victron brand section for more information about VE.Direct. Integrated battery life algorithm extends battery life If the charge controller can't manage to fully charge the battery within a day the battery status switches constantly between "partly charged" and "end of discharge". This operation mode (no regular charging) is ideal for small lead batteries, for lead-acid batteries otherwise irregular charging and discharging can cause severe damage already after several months. The battery life algorithm checks the battery's charging level and heightens the switch-off threshold from day to day. That means that connected consumers are switched off earlier until the produced energy is sufficient for a full battery charge of 100%. From this point on the threshold is modulated in a way that a full charge can be reached once a week. Delivery Scope: 1x Victron SCC010015200R BlueSolar MPPT 100/15 12V 24V 15A charge controller 1x Manual
€122.39*

The Victron MPPT 100/15 (MPN SCC010015200R) is part of the BlueSolar MPPT charge controller familiy and provides ultra-fast powertracking which extend...

Shipped in 1-3 days

Shipped in 1-3 days

Victron BlueSolar MPPT 100/30 12V 24V 30A
The Victron MPPT 100/30 (MPN SCC020030200) is part of the BlueSolar MPPT charge controller familiy and provides ultra-fast powertracking which extends your solar system's output. Compared to the 75/15 this controller processes a higher PV-Voltage and therefore handles a 100V DC safely. Next generation MPP-tracker Especially on clouded days with changing light intensity a MPPT controler increases your system output by up to 30% compared to PWM charge controllers. Besides a higher charging and PV-capacity this Blue varys from the lower models. The 100/30 allows the programming and saving of different charging algorithms. Those can be adjusted simply via a switch-wheel on the device. This is the first model without a consumer output. Programming, real-time data and logging Latest Apple and Android devices (smartphones, tablets,...) can be connected via VE.Direct over Bluetooth Smart Dongles and the MPPT App or via the GX Color control. Please note that the Bluetooth Smart dongle and the GX Color Control are not included in the delivery scope but available separately. Important features: Ultra-fast MPP-tracker ensures highest possible outcome even when it is cloudy Integrated VE.Direct data port for connecting devices like the Bluetooth Smart Dongle or the GX Color Control panel Suitable for 12V and 24V systems Rated charging amperage: 30A 440W max. PV-performance at 12V and 880W at 24V 30A consumer output with auto-shutdown at imminent battery undervoltage (deep discharge protection) Reverse polarity protection Multistep adaptive charging algorithm Battery charging algorithm programmable Integrated battery life algorithm extends battery life when activated and all consumers are connected to the consumer output Day/night-time control and dimming options VE.Direct data port integrated VE.Direct transfers important parameters to all devices connected to the charge controller and allows communication to equipment such as the Bluetooth Smart Dongle or the GX Color Control. The VE.Direct data port is meant for products where a full canbus integration would produce extreme costs. Please check our Victron brand section for more information about VE.Direct. Integrated battery life algorithm extends battery life If the charge controller can't manage to fully charge the battery within a day the battery status switches constantly between "partly charged" and "end of discharge". This operation mode (no regular charging) is ideal for small lead batteries, for lead-acid batteries otherwise irregular charging and discharging can cause severe damage already after several months. The battery life algorithm checks the battery's charging level and heightens the switch-off threshold from day to day. That means that connected consumers are switched off earlier until the produced energy is sufficient for a full battery charge of 100%. From this point on the threshold is modulated in a way that a full charge can be reached once a week. Delivery Scope: 1x Victron SCC020030200 BlueSolar MPPT 100/30 12V 24V 30A charge controller 1x Manual
€222.53*

The Victron MPPT 100/30 (MPN SCC020030200) is part of the BlueSolar MPPT charge controller familiy and provides ultra-fast powertracking which extends...

Shipped in 1-3 days

Shipped in 1-3 days

Votronic SR 330 Duo Digital 12V Solar Charge Controller
12V dual solar charge controller 21A escpecially for caravans and boats. Of course it's also suitable for other autarkic solar systems. Charges on-board and starter battery. For solar modules with:max. 330Wp module outputmax. 21A module currentmax. 28V module voltage Features: Main output (1): automatic charge and load preservation of the main supply battery (on-board battery) Second output (2): current and voltage-reduced to recharge and preserve starter batteries and keep them operational Stepless regulation: full battery through instant recharge after consumption Automatic charge program for Gel, acid/wet, AGM and lithium batteries Very low consumption Connectable to a battery temperature sensor Displays: 'full', '>80%', 'charging', 'stand-by' and 'undervoltage' Smooth battery charging - no overload  Maintenance-free Through intelligent micro-processor controlling the batteries are charged optimally with IU1oU2 curves.
€103.86*

12V dual solar charge controller 21A escpecially for caravans and boats. Of course it's also suitable for other autarkic solar systems. Charges on-boa...

Shipped in 1-3 days

Shipped in 1-3 days

Victron BlueSolar PWM-Light 12V 24V 20A Solar Charge Controller
The Victron PWM-Light 12V 24V 20A (MPN SCC010020020) is a reasonable-priced PWM charge controller that was especially developed to control lighting systems. There are several possibilities to configure the switching-off/on of these DC consumers. Of course with this charge controller other things like ventilation can be controlled.Please check the manual for detailled information about the possible configurations. Important product features: Load output with low battery voltage disconnect function. Lighting control function, one timer only. Two digit seven segment display for quick and easy setting of the load output functionality, including timer setting. Three stage battery charging (bulk, absorption, float), not programmable. Load output protected against over load and short circuit. Protected against reverse polarity connection of the solar array and/or battery. Day/night timing options: see manual for details Delivery scope:1x Victron Energy SCC010020020 PWM-Light 12/24V-20A 1x Manual
€44.51*

The Victron PWM-Light 12V 24V 20A (MPN SCC010020020) is a reasonable-priced PWM charge controller that was especially developed to control lighting sy...

Shipped in 1-3 days

Shipped in 1-3 days

PWM solar charge controller for system voltages from 12V to 24V

Up to 240W module performance at 24V battery voltage

Charge controllers are linked between solar modules and batteries to ensure that the battery is always fully charged.

PWM charge controller

A hybrid actuator detects the current battery chargin level and optimizes the charging progress using pulse width modulation.
Thanks to that there is only a small voltage drop (max. 0,2V) as well as a low consumption (max. 0,02A).

That makes PWM charge controller much more effective than a common linear controller.

Through an integrated microprocessor the solar battery is charged carefully an a long life-span is guaranteed.

LEDs show the current charging level as well as the charging via solar module. The integrated undervoltage protection
prevents the battery from deep discharge.

As the controller stops the charging process at full capacity the battery is also safe from an overload.

The charge controller is connectable to all types of solar modules and suitable to acid and gel batteries.
The microprocessor controls the switching threshold precisely and at stable temperature.

Features:

  • keeps the battery charged
  • suitable for acid, AGM and gel batteries
  • protects the battery from overloading
  • protects the battery from deep discharge through consumers
  • prevents a current reflow into the modules during the night
  • reverse polarity protection for battery and module
  • auto-shutdown when charging current exceeds the controllers capacity
  • auto-shutdown at short-circuit
  • automatic temperature compensation (ATC)
  • LED shows battery charging level
  • PWM modulation
  • auto-switch on/off depending on the battery's charging level
  • adjustable to 3 battery types: acid, AGM, gel
  • programmable timer (1-15h)
  • temperature range: -35°C-+55°C
Bedienungsanleitung_LS2024.pdf Download
Ambient temperature: -35°C - +55°C
Battery voltage max.: 32V
Charge controller type: PWM
Charging current (A): 20A
Charging voltage: max. 30V
Connection terminal: 10mm²
Consumer disconnection: 11,1V (22,2V)
Deep discharge protection: 10,8V (21,6V)
Dimensions: 144mm x 75,8mm x 45mm
Equalisation charge: AGM: 14.6V (29.2V), acid open: 14.8V (29.6V)
Manufacturer: Westech
Overvoltage shutdown: 16V (32V)
Own consumption under load: 6mA
Protection type: IP30
Protective functions: Reverse current lock (night), overload, overheating, charging, reverse polarity
Recharge: Gel: 14.2V (28.4), AGM: 14.4V (28.8), Acid open: 14.6V (29.2)
Scope of application: indoor area
Temperature compensation: 0-10mv / 2V
Voltage drop: Charge: =0.26V; Load: =0.15V
Weight: 250 g
max. load current: 20A
offgridtec.com Reviews with ekomi.de
Loading products