With the Growatt mic 600tl-x string inverter (MPN: mic 600tl-x), we offer a single-phase inverter that combines high yields with ease of use. It is especially suitable for small PV systems and delivers up to 600w AC output power. Simply connect it to your Solaransystem via the MC4 connector and off you go. This can be used to cover part of the power demand in a cost-efficient way. an optional Wi-Fi module also allows the unit to be monitored and configured on the go using the Shine app or web application. The Growatt mic Inverter at a glance Single phase operation Maximum Power Point Tracking Connect directly to photovoltaic modules Touch button and OLED display Compact design and easy installation 10 years manufacturer warranty Optionally possible: monitoring with the Shine platform (chargeable accessory required) Why a string inverter? The output of solar panels varies depending on temperature, irradiation and shading, which can lead to so-called mismatching losses. These losses occur when the output of one panel in a row is lower, resulting in lower power production for the entire row. A string inverter can reduce these losses. Maximum Power Point Tracking Maximum Power Point Tracking technology is used to generate the best possible yield from a Solaran system. The mppt of the mic inverter sets the optimal ratio between voltage and current during the course of the day, depending on the solar irradiation and the temperature of the solar modules. The wide mppt voltage range allows a large number of solar modules to be connected and provides an efficient energy yield. The advantage of this is most noticeable when the sky is partially overcast and the light intensity is constantly changing. Flexible and easy installation Thanks to its compact dimensions and light weight, the inverter is quick and easy to install and connect. Thanks to the integrated MC4 connectors, the connection from the solar supply to the inverter is also done in a few moments. The numerous protective functions ensure safe and smooth operation of the Solaranlage. Protective devices DC reverse polarity protection DC disconnector DC / AC surge arrester: Type III Insulation resistance detection Ground fault, mains and residual current monitoring AC short-circuit protection Island network detection AFCI protection Technical data max. PV power: 1050W max. input voltage: 500V Start voltage: 50V Nominal DC voltage: 120V mppt voltage range: 50V-500V AC rated power: 600w AC rated voltage: 230V Max. Efficiency: 96.5% Operating temperature range: -25°C - +60°C Protection class: IP65 Weight: 6kg Dimensions (H/W/D): 274 x 254 x 138 mm Scope of delivery: 1x Growatt mic 600tl-x inverter 1x mounting bracket 1x user manual

With the Growatt mic 800tl-x string inverter (MPN: mic 800tl-x), we offer a single-phase inverter that combines high yields with user-friendliness. It is particularly suitable for small PV systems and delivers up to 800w AC output power. Simply connect it to your Solarasystem via the MC4 connection and you're ready to go. This allows part of the power requirement to be covered cost-effectively. the device can also be monitored and configured on the move using the Shine app or web application via an optional WLAN module. The Growatt mic inverter at a glance Single-phase operation Maximum power point tracking Connect directly to photovoltaic modules Touch button and OLED display Compact design and easy installation 10-year manufacturer's warranty Optionally possible: monitoring with the Shine platform (accessories available for a fee) Why a string inverter? The output of solar modules varies depending on temperature, irradiation and shading, which can lead to so-called mismatching losses. These losses occur as soon as the output of a panel in a row is lower, which leads to lower electricity production for the entire row. A string inverter can reduce these losses. Maximum power point tracking Maximum Power Point Tracking technology is used to generate the best possible yield from a Solarasystem. The mppt of the mic inverter sets the optimum ratio between voltage and current over the course of the day, depending on the solar radiation and the temperature of the solar modules. The large mppt voltage range means that a large number of solar modules can be connected and this enables efficient energy yield, the advantage of which is most noticeable when the sky is partially overcast and the light intensity is constantly changing. Flexible and easy installation Thanks to its compact dimensions and low weight, the inverter is quick and easy to install and connect. Thanks to the integrated MC4 connections, the connection from the solar supply to the inverter is also completed in just a few moments. The numerous protective functions ensure safe and smooth operation of the Solarasystem. Protective devices DC reverse polarity protection DC disconnector DC / AC surge arrester: Type III Insulation resistance detection Earth fault, mains and residual current monitoring AC short-circuit protection Stand-alone grid detection AFCI protection Technical data max. PV power: 1120W max. input voltage: 500V Start voltage: 50V Nominal DC voltage: 120V mppt voltage range: 50V-500V Nominal AC power: 800w AC rated voltage: 230V Max. Efficiency: 96,5% Operating temperature range: -25°C - +60°C Protection class: IP65 Weight: 6kg Dimensions (H/W/D): 274 x 254 x 138 mm Scope of delivery: 1x Growatt mic 800tl-x inverter 1x mounting bracket 1x instruction manual

With the Growatt mic 3000tl-x string inverter (MPN: mic 3000tl-x), we offer a single-phase inverter that combines high yields with ease of use. It is especially suitable for small PV systems and delivers up to 3000w AC output power. Simply connect it to your Solaransystem via the MC4 connector and off you go. This can be used to cover part of the power demand in a cost-efficient way. an optional Wi-Fi module also allows the unit to be monitored and configured on the go using the Shine app or web application. The Growatt mic Inverter at a glance Single phase operation Maximum Power Point Tracking Connect directly to photovoltaic modules Touch button and OLED display Compact design and easy installation 10 years manufacturer warranty Optionally possible: monitoring with the Shine platform (chargeable accessory required) Why a string inverter? The output of solar panels varies depending on temperature, irradiation and shading, which can lead to so-called mismatching losses. These losses occur when the output of one panel in a row is lower, resulting in lower power production for the entire row. A string inverter can reduce these losses. Maximum Power Point Tracking Maximum Power Point Tracking technology is used to generate the best possible yield from a Solaran system. The mppt of the mic inverter sets the optimal ratio between voltage and current during the course of the day, depending on the solar irradiation and the temperature of the solar modules. The wide mppt voltage range allows a large number of solar modules to be connected and provides an efficient energy yield. The advantage of this is most noticeable when the sky is partially overcast and the light intensity is constantly changing. Flexible and easy installation Thanks to its compact dimensions and light weight, the inverter is quick and easy to install and connect. Thanks to the integrated MC4 connectors, the connection from the solar supply to the inverter is also done in a few moments. The numerous protective functions ensure safe and smooth operation of the Solaranlage. Protective devices DC reverse polarity protection DC disconnector DC / AC surge arrester: Type III Insulation resistance detection Ground fault, mains and residual current monitoring AC short-circuit protection Island network detection AFCI protection Technical data max. PV power: 4200W max. input voltage: 550V Start voltage: 80V Nominal DC voltage: 360V mppt voltage range: 65V-550V AC rated power: 3000w AC rated voltage: 230V Max. Efficiency: 97.6% Operating temperature range: -25°C - +60°C Protection class: IP65 Weight: 6kg Dimensions (H/W/D): 274 x 254 x 138 mm Scope of delivery: 1x Growatt mic 3000tl-x inverter 1x mounting bracket 1x user manual

With the Growatt mic 3300tl-x string inverter (MPN: mic 3300tl-x), we offer a single-phase inverter that combines high yields with user-friendliness. It is particularly suitable for small PV systems and delivers up to 3300w AC output power. Simply connect it to your Solarasystem via the MC4 connection and you're ready to go. This allows part of the power requirement to be covered cost-effectively. the device can also be monitored and configured on the move using the Shine app or web application via an optional WLAN module. The Growatt mic inverter at a glance Single-phase operation Maximum power point tracking Connect directly to photovoltaic modules Touch button and OLED display Compact design and easy installation 10-year manufacturer's warranty Optionally possible: monitoring with the Shine platform (accessories available for a fee) Why a string inverter? The output of solar modules varies depending on temperature, irradiation and shading, which can lead to so-called mismatching losses. These losses occur as soon as the output of a panel in a row is lower, which leads to lower electricity production for the entire row. A string inverter can reduce these losses. Maximum power point tracking Maximum Power Point Tracking technology is used to generate the best possible yield from a Solarasystem. The mppt of the mic inverter sets the optimum ratio between voltage and current over the course of the day, depending on the solar radiation and the temperature of the solar modules. The large mppt voltage range means that a large number of solar modules can be connected and this enables efficient energy yield, the advantage of which is most noticeable when the sky is partially overcast and the light intensity is constantly changing. Flexible and easy installation Thanks to its compact dimensions and low weight, the inverter is quick and easy to install and connect. Thanks to the integrated MC4 connections, the connection from the solar supply to the inverter is also completed in just a few moments. The numerous protective functions ensure safe and smooth operation of the Solarasystem. Protective devices DC reverse polarity protection DC disconnector DC / AC surge arrester: Type III Insulation resistance detection Earth fault, mains and residual current monitoring AC short-circuit protection Stand-alone grid detection AFCI protection Technical data max. PV power: 4290W max. input voltage: 550V Start voltage: 80V Nominal DC voltage: 360V mppt voltage range: 65V-550V Nominal AC power: 3300w AC rated voltage: 230V Max. Efficiency: 97,6% Operating temperature range: -25°C - +60°C Protection class: IP65 Weight: 6kg Dimensions (H/W/D): 274 x 254 x 138 mm Scope of delivery: 1x Growatt mic 3300tl-x inverter 1x mounting bracket 1x instruction manual

With the Growatt mic 750tl-x string inverter (MPN: mic 750tl-x), we offer a single-phase inverter that combines high yields with user-friendliness. It is particularly suitable for small PV systems and delivers up to 750w AC output power. Simply connect it to your Solarasystem via the MC4 connection and you're ready to go. This allows part of the power requirement to be covered cost-effectively. the device can also be monitored and configured on the move using the Shine app or web application via an optional WLAN module. The Growatt mic inverter at a glance Single-phase operation Maximum power point tracking Connect directly to photovoltaic modules Touch button and OLED display Compact design and easy installation 10-year manufacturer's warranty Optionally possible: monitoring with the Shine platform (accessories available for a fee) Why a string inverter? The output of solar modules varies depending on temperature, irradiation and shading, which can lead to so-called mismatching losses. These losses occur as soon as the output of a panel in a row is lower, which leads to lower electricity production for the entire row. A string inverter can reduce these losses. Maximum power point tracking Maximum Power Point Tracking technology is used to generate the best possible yield from a Solarasystem. The mppt of the mic inverter sets the optimum ratio between voltage and current over the course of the day, depending on the solar radiation and the temperature of the solar modules. The large mppt voltage range means that a large number of solar modules can be connected and this enables efficient energy yield, the advantage of which is most noticeable when the sky is partially overcast and the light intensity is constantly changing. Flexible and easy installation Thanks to its compact dimensions and low weight, the inverter is quick and easy to install and connect. Thanks to the integrated MC4 connections, the connection from the solar supply to the inverter is also completed in just a few moments. The numerous protective functions ensure safe and smooth operation of the Solarasystem. Protective devices DC reverse polarity protection DC disconnector DC / AC surge arrester: Type III Insulation resistance detection Earth fault, mains and residual current monitoring AC short-circuit protection Stand-alone grid detection AFCI protection Technical data max. PV power: 1050W max. input voltage: 500V Start voltage: 50V Nominal DC voltage: 120V mppt voltage range: 50V-500V Nominal AC power: 750w AC rated voltage: 230V Max. Efficiency: 97,4% Operating temperature range: -25°C - +60°C Protection class: IP65 Weight: 6kg Dimensions (H/W/D): 274 x 254 x 138 mm Scope of delivery: 1x Growatt mic 750tl-x inverter 1x mounting bracket 1x instruction manual

With the Growatt mic 1000tl-x string inverter (MPN: mic 1000tl-x), we offer a single-phase inverter that combines high yields with user-friendliness. It is particularly suitable for small PV systems and delivers up to 1000w AC output power. Simply connect it to your Solarasystem via the MC4 connection and you're ready to go. This allows part of the power requirement to be covered cost-effectively. the device can also be monitored and configured on the move using the Shine app or web application via an optional WLAN module. The Growatt mic inverter at a glance Single-phase operation Maximum power point tracking Connect directly to photovoltaic modules Touch button and OLED display Compact design and easy installation 10-year manufacturer's warranty Optionally possible: monitoring with the Shine platform (accessories available for a fee) Why a string inverter? The output of solar modules varies depending on temperature, irradiation and shading, which can lead to so-called mismatching losses. These losses occur as soon as the output of a panel in a row is lower, which leads to lower electricity production for the entire row. A string inverter can reduce these losses. Maximum power point tracking Maximum Power Point Tracking technology is used to generate the best possible yield from a Solarasystem. The mppt of the mic inverter sets the optimum ratio between voltage and current over the course of the day, depending on the solar radiation and the temperature of the solar modules. The large mppt voltage range means that a large number of solar modules can be connected and this enables efficient energy yield, the advantage of which is most noticeable when the sky is partially overcast and the light intensity is constantly changing. Flexible and easy installation Thanks to its compact dimensions and low weight, the inverter is quick and easy to install and connect. Thanks to the integrated MC4 connections, the connection from the solar supply to the inverter is also completed in just a few moments. The numerous protective functions ensure safe and smooth operation of the Solarasystem. Protective devices DC reverse polarity protection DC disconnector DC / AC surge arrester: Type III Insulation resistance detection Earth fault, mains and residual current monitoring AC short-circuit protection Stand-alone grid detection AFCI protection Technical data max. PV power: 1400 W max. input voltage: 500V Start voltage: 50V Nominal DC voltage: 180V mppt voltage range: 50V-500V Nominal AC power: 1000w AC rated voltage: 230V Max. Efficiency: 97,4% Operating temperature range: -25°C - +60°C Protection class: IP65 Weight: 6kg Dimensions (H/W/D): 274 x 254 x 138 mm Scope of delivery: 1x Growatt mic 1000tl-x inverter 1x mounting bracket 1x instruction manual

With the Growatt mic 2000tl-x string inverter (MPN: mic 2000tl-x), we offer a single-phase inverter that combines high yields with user-friendliness. It is particularly suitable for small PV systems and delivers up to 600w AC output power. Simply connect it to your Solarasystem via the MC4 connection and you're ready to go. This allows part of the power requirement to be covered cost-effectively. the device can also be monitored and configured on the move using the Shine app or web application via an optional WLAN module. The Growatt mic inverter at a glance Single-phase operation Maximum power point tracking Connect directly to photovoltaic modules Touch button and OLED display Compact design and easy installation 10-year manufacturer's warranty Optionally possible: monitoring with the Shine platform (accessories available for a fee) Why a string inverter? The output of solar modules varies depending on temperature, irradiation and shading, which can lead to so-called mismatching losses. These losses occur as soon as the output of a panel in a row is lower, resulting in lower electricity production for the entire row. A string inverter can reduce these losses. Maximum power point tracking Maximum Power Point Tracking technology is used to generate the best possible yield from a Solarasystem. The mppt of the mic inverter sets the optimum ratio between voltage and current over the course of the day, depending on the solar radiation and the temperature of the solar modules. The large mppt voltage range means that a large number of solar modules can be connected and this enables efficient energy yield, the advantage of which is most noticeable when the sky is partially overcast and the light intensity is constantly changing. Flexible and easy installation Thanks to its compact dimensions and low weight, the inverter is quick and easy to install and connect. Thanks to the integrated MC4 connections, the connection from the solar supply to the inverter is also completed in just a few moments. The numerous protective functions ensure safe and smooth operation of the Solarasystem. Protective devices DC reverse polarity protection DC disconnector DC / AC surge arrester: Type III Insulation resistance detection Earth fault, mains and residual current monitoring AC short-circuit protection Stand-alone grid detection AFCI protection Technical data max. PV power: 2800W max. input voltage: 500V Start voltage: 50V Nominal DC voltage: 360V mppt voltage range: 50V-500V Nominal AC power: 2000W AC nominal voltage: 230V Max. Efficiency: 97,4% Operating temperature range: -25°C - +60°C Protection class: IP65 Weight: 6kg Dimensions (H/W/D): 274 x 254 x 138 mm Scope of delivery: 1x Growatt mic 2000tl-x inverter 1x mounting bracket 1x instruction manual

The spa 8000tl3 bh-up from Growatt is a 3-phase grid inverter that provides a state-of-the-art solution for your solar projects. With three programmable operating modes, a VPP interface and a wide battery voltage range of 100-550v, it offers efficiency and flexibility. In addition, it supports retrofits and new systems and ensures compatibility with high-voltage batteries. about the spa 8000tl3 bh-up inverter 100% three-phase unbalanced output Intelligent power control at phase level Intelligent load control via dry contact Wide battery voltage range 100-550 V UPS function, 10ms transfer VPP interface Programmable operating modes Display via led and lcd Supports lithium and lead-acid batteries Easy installation Intelligent load management The inverter's integrated smart load control enables precise and efficient control of energy consumption. By using a potential-free contact, electrical loads can be controlled intelligently and prioritized. This function enables automatic detection of energy requirements and optimum use of the available energy. Smart load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your Solarasystem. Growatt monitoring platform By using the optional accessories of the Shine series, you can use the Growatt monitoring platform. This platform is available as a smartphone app for iOS and Android as well as a web version. The Shine accessories must be purchased separately, but use of the platform is free of charge. you can configure and monitor all your Growatt products via Shine, and it also allows you to view self-consumption and track trends. The following Shine options are compatible with the spa series: ShineWiFi-X ShineLink-X Shine4G-X ShineMaster Operating modes - Configurable according to system requirements Online mode Users can set a suitable priority mode in online mode according to the request while the spa is working. If the lcd and button settings are used, only one time period can be set. However, if the website settings are used, up to three time periods can be set for the priority mode Load First: With an inverter in the spa system, the energy from the inverter is optimized for the load and then the battery is charged. surplus energy is exported to the grid. Without Inverter or if the energy is low, the battery discharges first for the load and the grid supplies the energy if the battery capacity is insufficient. Battery First: When the spa series operates in this mode, the battery is charged first. This is suitable for periods of low power consumption. The switch-on and switch-off times of the mode and the end time of the battery charge level must be set. It is also possible to set a power that is lower than the maximum output power of the battery. With an inverter in the spa system, the energy from the inverter is first used for the battery, then for the load. The grid supplies the energy if the power of the inverter is not sufficient. Without Inverter or if its power is too low, the battery and the load are supplied by the mains. Grid First: If the spa series is operating in grid-first mode, the energy is fed into the grid first. Time periods can be set when the power consumption is too high. The switch-on and switch-off times of the mode and the end time of the battery charge level must be set here. A power can be set that is lower than the maximum output power of the battery. With an inverter in the spa system, the battery discharges to the load. If the sum of inverter power and battery power is greater than the load, excess energy flows into the grid. Without Inverter or if its energy is too low, the battery discharges to the load and excess energy flows into the grid. Backup mode: If the grid fails, the system switches to backup mode and AC power is output via the eps LOAD port using all the energy from the battery. Note that the maximum output power of the spa in this mode is 10,000w and the load connected to the eps LOAD port should be less than 10,000w. Note: You can only set a time period for "Battery First" and "Grid First" on the lcd. If you want to set more than this, you have to do so via the shineserver. Error mode: The spa`s intelligent control system continuously monitors and adjusts the status of the system. If the inverter detects unexpected events such as system error or machine error, the lcd display will show the error information and the led light will light up in error mode. Programming mode: Programming mode indicates that the spa system is being updated. The power supply should not be interrupted during the process. The inverter is automatically logged out when the update is complete and switches to another mode. verification mode: Before the spa operates in normal mode, it will switch to self-check mode. If everything is OK then, the system will switch to normal mode. Otherwise, the error mode will respond. Standby mode: If the system has no errors but the conditions are not met, the spa remains in standby mode. Technical data AC rated power: 8000W AC nominal voltage range: 230/400v (310-476V) Frequency range: 50/60Hz, ±5Hz Max. Output current: 12.1A Battery voltage range: 100-550v Max. Charging and discharging current: 25A IP protection class: IP65 Manufacturer's warranty: 10 years Operating temperature range: -25°C - +60°C Maximum efficiency of 98.2% Dimensions: 505 x 453 x 198 mm Weight: 28 kg Scope of delivery 1x Growatt spa 8000tl3 bh-up grid inverter

The spa 6000tl3 bh-up from Growatt is a 3-phase grid inverter that provides a state-of-the-art solution for your solar projects. With three programmable operating modes, a VPP interface and a wide battery voltage range of 100-550v, it offers efficiency and flexibility. In addition, it supports retrofits and new systems and ensures compatibility with high-voltage batteries. about the spa 6000tl3 bh-up inverter about the spa 5000tl3 bh-up inverter 100% three-phase unbalanced output Intelligent power control at phase level Intelligent load control via dry contact Wide battery voltage range 100-550 V UPS function, 10ms transfer VPP interface Programmable operating modes Display via led and lcd Supports lithium and lead-acid batteries Easy installation Intelligent load management The inverter's integrated smart load control enables precise and efficient control of energy consumption. By using a potential-free contact, electrical loads can be controlled intelligently and prioritized. This function enables automatic detection of energy requirements and optimum use of the available energy. Smart load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your Solarasystem. Growatt monitoring platform By using the optional accessories of the Shine series, you can use the Growatt monitoring platform. This platform is available as a smartphone app for iOS and Android as well as a web version. The Shine accessories must be purchased separately, but use of the platform is free of charge. you can configure and monitor all your Growatt products via Shine, and it also allows you to view self-consumption and track trends. The following Shine options are compatible with the spa series: ShineWiFi-X ShineLink-X Shine4G-X ShineMaster Operating modes - Configurable according to system requirements Online mode Users can set a suitable priority mode in online mode according to the request while the spa is working. If the lcd and button settings are used, only one time period can be set. However, if the website settings are used, up to three time periods can be set for the priority mode Load First: With an inverter in the spa system, the energy from the inverter is optimized for the load and then the battery is charged. surplus energy is exported to the grid. Without Inverter or if the energy is low, the battery discharges first for the load and the grid supplies the energy if the battery capacity is insufficient. Battery First: When the spa series operates in this mode, the battery is charged first. This is suitable for periods of low power consumption. The switch-on and switch-off times of the mode and the end time of the battery charge level must be set. It is also possible to set a power that is lower than the maximum output power of the battery. With an inverter in the spa system, the energy from the inverter is first used for the battery, then for the load. The grid supplies the energy if the power of the inverter is not sufficient. Without Inverter or if its power is too low, the battery and the load are supplied by the mains. Grid First: If the spa series is operating in grid-first mode, the energy is fed into the grid first. Time periods can be set when the power consumption is too high. The switch-on and switch-off times of the mode and the end time of the battery charge level must be set here. A power can be set that is lower than the maximum output power of the battery. With an inverter in the spa system, the battery discharges to the load. If the sum of inverter power and battery power is greater than the load, excess energy flows into the grid. Without Inverter or if its energy is too low, the battery discharges to the load and excess energy flows into the grid. Backup mode: If the grid fails, the system switches to backup mode and AC power is output via the eps LOAD port using all the energy from the battery. Note that the maximum output power of the spa in this mode is 10,000w and the load connected to the eps LOAD port should be less than 10,000w. Note: You can only set a time period for "Battery First" and "Grid First" on the lcd. If you want to set more than this, you have to do so via the shineserver. Error mode: The spa`s intelligent control system continuously monitors and adjusts the status of the system. If the inverter detects unexpected events such as system error or machine error, the lcd display will show the error information and the led light will light up in error mode. Programming mode: Programming mode indicates that the spa system is being updated. The power supply should not be interrupted during the process. The inverter is automatically logged out when the update is complete and switches to another mode. verification mode: Before the spa operates in normal mode, it will switch to self-check mode. If everything is OK then, the system will switch to normal mode. Otherwise, the error mode will respond. Standby mode: If the system has no errors but the conditions are not met, the spa remains in standby mode. Technical data AC rated power: 6000W AC nominal voltage range: 230/400v (310-476V) Frequency range: 50/60Hz, ±5Hz Max. Output current: 9.1A Battery voltage range: 100-550v Max. Charging and discharging current: 25A IP protection class: IP65 Manufacturer's warranty: 10 years Operating temperature range: -25°C - +60°C Maximum efficiency of 98 Dimensions: 505 x 453 x 198 mm Weight: 28 kg Scope of delivery 1x Growatt spa 6000tl3 bh-up grid inverter

The spa 7000tl3 bh-up from Growatt is a 3-phase grid inverter that provides a state-of-the-art solution for your solar projects. With three programmable operating modes, a VPP interface and a wide battery voltage range of 100-550v, it offers efficiency and flexibility. In addition, it supports retrofits and new systems and ensures compatibility with high-voltage batteries. about the spa 7000tl3 bh-up inverter 100% three-phase unbalanced output Intelligent power control at phase level Intelligent load control via dry contact Wide battery voltage range 100-550 V UPS function, 10ms transfer VPP interface Programmable operating modes Display via led and lcd Supports lithium and lead-acid batteries Easy installation Intelligent load management The inverter's integrated smart load control enables precise and efficient control of energy consumption. By using a potential-free contact, electrical loads can be controlled intelligently and prioritized. This function enables automatic detection of energy requirements and optimum use of the available energy. Smart load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your Solarasystem. Growatt monitoring platform By using the optional accessories of the Shine series, you can use the Growatt monitoring platform. This platform is available as a smartphone app for iOS and Android as well as a web version. The Shine accessories must be purchased separately, but use of the platform is free of charge. you can configure and monitor all your Growatt products via Shine, and it also allows you to view self-consumption and track trends. The following Shine options are compatible with the spa series: ShineWiFi-X ShineLink-X Shine4G-X ShineMaster Operating modes - Configurable according to system requirements Online mode Users can set a suitable priority mode in online mode according to the request while the spa is working. If the lcd and button settings are used, only one time period can be set. However, if the website settings are used, up to three time periods can be set for the priority mode Load First: With an inverter in the spa system, the energy from the inverter is optimized for the load and then the battery is charged. surplus energy is exported to the grid. Without Inverter or if the energy is low, the battery discharges first for the load and the grid supplies the energy if the battery capacity is insufficient. Battery First: When the spa series operates in this mode, the battery is charged first. This is suitable for periods of low power consumption. The switch-on and switch-off times of the mode and the end time of the battery charge level must be set. It is also possible to set a power that is lower than the maximum output power of the battery. With an inverter in the spa system, the energy from the inverter is first used for the battery, then for the load. The grid supplies the energy if the power of the inverter is not sufficient. Without Inverter or if its power is too low, the battery and the load are supplied by the mains. Grid First: If the spa series is operating in grid-first mode, the energy is fed into the grid first. Time periods can be set when the power consumption is too high. The switch-on and switch-off times of the mode and the end time of the battery charge level must be set here. A power can be set that is lower than the maximum output power of the battery. With an inverter in the spa system, the battery discharges to the load. If the sum of inverter power and battery power is greater than the load, excess energy flows into the grid. Without Inverter or if its energy is too low, the battery discharges to the load and excess energy flows into the grid. Backup mode: If the grid fails, the system switches to backup mode and AC power is output via the eps LOAD port using all the energy from the battery. Note that the maximum output power of the spa in this mode is 10,000w and the load connected to the eps LOAD port should be less than 10,000w. Note: You can only set a time period for "Battery First" and "Grid First" on the lcd. If you want to set more than this, you have to do so via the shineserver. Error mode: The spa`s intelligent control system continuously monitors and adjusts the status of the system. If the inverter detects unexpected events such as system error or machine error, the lcd display will show the error information and the led light will light up in error mode. Programming mode: Programming mode indicates that the spa system is being updated. The power supply should not be interrupted during the process. The inverter is automatically logged out when the update is complete and switches to another mode. verification mode: Before the spa operates in normal mode, it will switch to self-check mode. If everything is OK then, the system will switch to normal mode. Otherwise, the error mode will respond. Standby mode: If the system has no errors but the conditions are not met, the spa remains in standby mode. Technical data AC rated power: 7000W AC nominal voltage range: 230/400v (310-476V) Frequency range: 50/60Hz, ±5Hz Max. Output current: 10.6A Battery voltage range: 100-550v Max. Charging and discharging current: 25A IP protection class: IP65 Manufacturer's warranty: 10 years Operating temperature range: -25°C - +60°C Maximum efficiency of 98.2% Dimensions: 505 x 453 x 198 mm Weight: 28 kg Scope of delivery 1x Growatt spa 7000tl3 bh-up grid inverter

Compact and easy to handle: The Growatt mid 17ktl3-x (mpn: mid 17ktl3-x) is the ideal inverter solution for commercial and industrial pv systems. With a weight of 23 kg, the smart inverter is up to 40% lighter than comparable devices and is easy to operate and maintain thanks to a touch button and OLED display. It also has an efficiency of 98.75%.The Growatt mid at a glanceTwo maximum power point trackersthree-phase operationCompact and 40% lighterType ii spd on dc and AC sidesIntelligent string monitoringTouch button and OLED display10-year manufacturer's warrantyOptionally possible: monitoring with the Shine platform (accessories available at extra cost)Maximum power point trackingMppt technology optimizes the relationship between voltage and current to generate maximum energy. The mid inverter uses mppt to extract the maximum power from the solar modules, which is particularly useful when light intensity fluctuates. The wide mppt voltage range of the inverter enables efficient energy generation and the use of a large number of solar modules.Arc detection (AFCI)If your pv modules, plugs or cables are incorrectly installed or damaged, so-called electric arcs can occur, which can cause fires. To quickly prevent such fires, Growatt has developed an optional arc detection function. This function can be installed and ensures a higher level of safety for you and your pv system.Intelligent string monitoringThanks to the ability to take targeted action against faults in individual strings, intelligent string monitoring significantly increases efficiency. For example, if panels or contacts and cabling are defective, the system reacts immediatelyGrowatt monitoring platformThe Growatt monitoring platform can be used with the optional accessories from the Shine series. This is available as a smartphone app for iOS and Android as well as a web version. The Shine accessories must be purchased separately, but use of the platform is free of charge. With Shine, you can configure and monitor all your Growatt products and view your own consumption and trends.The following Shine options are compatible with the mid series:Shine WiFi-X/ ShineLan-X/Shine4G-XShineLink-XShineMasterSEMTechnical dataInput (DC)max. pv power (stc): 25500Wmax. input voltage: 1100VStart voltage: 250Vnominal dc voltage: 580Vmppt voltage range: 160V-1000VNumber of independent MPP trackers: 2Number of strings per MPP tracker: 2max. input current per MPP tracker: 27Amax. short-circuit current per MPP tracker: 33.8 AOutput (AC)AC rated power: 17000 WÁC rated voltage (range): 220v/380v, 230v/400v (340-440V)AC mains frequency: 50/60 HzMax. Output current: 27.4 AGeneralMax. Efficiency: 98.75 %Dimensions: 525 x 395 x 222 mmWeight: 23kgOperating temperature range: -25°C - +60°CSelf-consumption (night): <1WProtection class: IP65Scope of delivery:1x Growatt mid 17-22ktl3-x grid inverter

Compact and easy to handle: The Growatt mid 25ktl3-x (mpn: mid 25ktl3-x) is the ideal inverter solution for commercial and industrial pv systems. The smart inverter is easy to operate and maintain thanks to a touch button and an OLED display. It has an efficiency of 98.8%.The Growatt mid at a glanceThree maximum power point trackersthree-phase operationType ii spd on dc and AC sidesIntelligent string monitoringTouch button and OLED display10-year manufacturer's warrantyOptionally possible: monitoring with the Shine platform (accessory available at extra cost)Maximum power point trackingMppt technology optimizes the relationship between voltage and current to generate maximum energy. The mid inverter uses mppt to extract the maximum power from the solar modules, which is particularly useful when light intensity fluctuates. The wide mppt voltage range of the inverter enables efficient energy generation and the use of a large number of solar modules.Arc detection (AFCI)If your pv modules, plugs or cables are incorrectly installed or damaged, so-called electric arcs can occur, which can cause fires. To quickly prevent such fires, Growatt has developed an optional arc detection function. This function can be installed and ensures a higher level of safety for you and your pv system.Intelligent string monitoringThanks to the ability to take targeted action against faults in individual strings, intelligent string monitoring significantly increases efficiency. For example, if panels or contacts and cabling are defective, the system reacts immediately.Growatt monitoring platformThe Growatt monitoring platform can be used with the optional accessories from the Shine series. This is available both as a smartphone app for iOS and Android and as a web version. The Shine accessories must be purchased separately, but use of the platform is free of charge. With Shine, you can configure and monitor all your Growatt products and view your own consumption and trends.The following Shine options are compatible with the mid series:Shine WiFi-X/ ShineLan-X/Shine4G-XShineLink-XShineMasterSEMTechnical dataInput (DC)max. pv power (stc): 37500Wmax. input voltage: 1100VStart voltage: 250Vnominal dc voltage: 600Vmppt voltage range: 200V-1000VNumber of independent MPP trackers: 3Number of strings per MPP tracker: 2max. input current per MPP tracker: 26 Amax. short-circuit current per MPP tracker: 32 AOutput (AC)AC rated power: 25000 WÁC rated voltage (range): 220v/380v, 230v/400v (340-440V)AC mains frequency: 50/60 HzMax. Output current: 40 AGeneralMax. Efficiency: 98.8 %Dimensions: 580 x 435 x 230 mmWeight: 29.5 kgOperating temperature range: -35°C - +60°CSelf-consumption (night): <1WProtection class: IP66Scope of delivery:1x Growatt mid 25-40ktl3-x grid inverter

Compact and easy to handle: The Growatt mid 33ktl3-x (mpn: mid 33tl3-x) is the ideal inverter solution for commercial and industrial pv systems. The smart inverter is easy to operate and maintain thanks to a touch button and an OLED display. It has an efficiency of 98.8%.The Growatt mid at a glanceThree maximum power point trackersthree-phase operationType ii spd on dc and AC sidesIntelligent string monitoringTouch button and OLED display10-year manufacturer's warrantyOptionally possible: monitoring with the Shine platform (accessory available at extra cost)Maximum power point trackingMppt technology optimizes the relationship between voltage and current to generate maximum energy. The mid inverter uses mppt to extract the maximum power from the solar modules, which is particularly useful when light intensity fluctuates. The wide mppt voltage range of the inverter enables efficient energy generation and the use of a large number of solar modules.Arc detection (AFCI)If your pv modules, plugs or cables are incorrectly installed or damaged, so-called electric arcs can occur, which can cause fires. To quickly prevent such fires, Growatt has developed an optional arc detection function. This function can be installed and ensures a higher level of safety for you and your pv system.Intelligent string monitoringThanks to the ability to take targeted action against faults in individual strings, intelligent string monitoring significantly increases efficiency. For example, if panels or contacts and cabling are defective, the system reacts immediately.Growatt monitoring platformThe Growatt monitoring platform can be used with the optional accessories from the Shine series. This is available both as a smartphone app for iOS and Android and as a web version. The Shine accessories must be purchased separately, but use of the platform is free of charge. With Shine, you can configure and monitor all your Growatt products and view your own consumption and trends.The following Shine options are compatible with the mid series:Shine WiFi-X/ ShineLan-X/Shine4G-XShineLink-XShineMasterSEMTechnical dataInput (DC)max. pv power (stc): 49500Wmax. input voltage: 1100VStart voltage: 250Vnominal dc voltage: 600Vmppt voltage range: 200V-1000VNumber of independent MPP trackers: 3Number of strings per MPP tracker: 2max. input current per MPP tracker: 26 Amax. short-circuit current per MPP tracker: 32 AOutput (AC)AC rated power: 33000 WÁC rated voltage (range): 220v/380v, 230v/400v (340-440V)AC mains frequency: 50/60 HzMax. Output current: 55.5 AGeneralMax. Efficiency: 98.8 %Dimensions: 580 x 435 x 230 mmWeight: 29.5 kgOperating temperature range: -35°C - +60°CSelf-consumption (night): <1WProtection class: IP66Scope of delivery:1x Growatt mid 25-40ktl3-x grid inverter

Compact and easy to handle: The Growatt mid 36ktl3-x (mpn: mid 36tl3-x) is the ideal inverter solution for commercial and industrial pv systems. The smart inverter is easy to operate and maintain thanks to a touch button and an OLED display. It has an efficiency of 98.8%.The Growatt mid at a glanceFour maximum power point trackersthree-phase operationType ii spd on dc and AC sidesIntelligent string monitoringTouch button and OLED display10-year manufacturer's warrantyOptionally possible: monitoring with the Shine platform (accessory available at extra cost)Maximum power point trackingMppt technology optimizes the relationship between voltage and current to generate maximum energy. The mid inverter uses mppt to extract the maximum power from the solar modules, which is particularly useful when light intensity fluctuates. The wide mppt voltage range of the inverter enables efficient energy generation and the use of a large number of solar modules.Arc detection (AFCI)If your pv modules, plugs or cables are incorrectly installed or damaged, so-called electric arcs can occur, which can cause fires. To quickly prevent such fires, Growatt has developed an optional arc detection function. This function can be installed and ensures a higher level of safety for you and your pv system.Intelligent string monitoringThanks to the ability to take targeted action against faults in individual strings, intelligent string monitoring significantly increases efficiency. For example, if panels or contacts and cabling are defective, the system reacts immediately.Growatt monitoring platformThe Growatt monitoring platform can be used with the optional accessories from the Shine series. This is available both as a smartphone app for iOS and Android and as a web version. The Shine accessories must be purchased separately, but use of the platform is free of charge. With Shine, you can configure and monitor all your Growatt products and view your own consumption and trends.The following Shine options are compatible with the mid series:Shine WiFi-X/ ShineLan-X/Shine4G-XShineLink-XShineMasterSEMTechnical dataInput (DC)max. pv power (stc): 54000Wmax. input voltage: 1100VStart voltage: 250Vnominal dc voltage: 600Vmppt voltage range: 200V-1000VNumber of independent MPP trackers: 4Number of strings per MPP tracker: 2max. input current per MPP tracker: 26 Amax. short-circuit current per MPP tracker: 32 AOutput (AC)AC rated power: 36000 WÁC rated voltage (range): 220v/380v, 230v/400v (340-440V)AC mains frequency: 50/60 HzMax. Output current: 60 AGeneralMax. Efficiency: 98.8 %Dimensions: 580 x 435 x 230 mmWeight: 30.5 kgOperating temperature range: -35°C - +60°CSelf-consumption (night): <1WProtection class: IP66Scope of delivery:1x Growatt mid 25-40ktl3-x grid inverter

The spa 5000tl3 bh-up from Growatt is a 3-phase grid inverter that provides a state-of-the-art solution for your solar projects. With its programmable operating modes, a VPP interface and a wide battery voltage range of 100-550v, it offers efficiency and flexibility. In addition, it supports retrofits and new systems and ensures compatibility with high-voltage batteries. about the spa 5000tl3 bh-up inverter 100% three-phase unbalanced output Intelligent power control at phase level Intelligent load control via dry contact Wide battery voltage range 100-550 V UPS function, 10ms transfer VPP interface Programmable operating modes Display via led and lcd Supports lithium and lead-acid batteries Easy installation Intelligent load management The inverter's integrated smart load control enables precise and efficient control of energy consumption. By using a potential-free contact, electrical loads can be controlled intelligently and prioritized. This function enables automatic detection of energy requirements and optimum use of the available energy. Smart load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your Solarasystem. Growatt monitoring platform By using the optional accessories of the Shine series, you can use the Growatt monitoring platform. This platform is available as a smartphone app for iOS and Android as well as a web version. The Shine accessories must be purchased separately, but use of the platform is free of charge. you can configure and monitor all your Growatt products via Shine, and it also allows you to view self-consumption and track trends. The following Shine options are compatible with the spa series: ShineWiFi-X ShineLink-X Shine4G-X ShineMaster Operating modes - Configurable according to system requirements Online mode Users can set a suitable priority mode in online mode according to the request while the spa is working. If the lcd and button settings are used, only one time period can be set. However, if the website settings are used, up to three time periods can be set for the priority mode Load First: With an inverter in the spa system, the energy from the inverter is optimized for the load and then the battery is charged. surplus energy is exported to the grid. Without Inverter or if the energy is low, the battery discharges first for the load and the grid supplies the energy if the battery capacity is insufficient. Battery First: When the spa series operates in this mode, the battery is charged first. This is suitable for periods of low power consumption. The switch-on and switch-off times of the mode and the end time of the battery charge level must be set. It is also possible to set a power that is lower than the maximum output power of the battery. With an inverter in the spa system, the energy from the inverter is first used for the battery, then for the load. The grid supplies the energy if the power of the inverter is not sufficient. Without Inverter or if its power is too low, the battery and the load are supplied by the mains. Grid First: If the spa series is operating in grid-first mode, the energy is fed into the grid first. Time periods can be set when the power consumption is too high. The switch-on and switch-off times of the mode and the end time of the battery charge level must be set here. A power can be set that is lower than the maximum output power of the battery. With an inverter in the spa system, the battery discharges to the load. If the sum of inverter power and battery power is greater than the load, excess energy flows into the grid. Without Inverter or if its energy is too low, the battery discharges to the load and excess energy flows into the grid. Backup mode: If the grid fails, the system switches to backup mode and AC power is output via the eps LOAD port using all the energy from the battery. Note that the maximum output power of the spa in this mode is 10,000w and the load connected to the eps LOAD port should be less than 10,000w. Note: You can only set a time period for "Battery First" and "Grid First" on the lcd. If you want to set more than this, you have to do so via the shineserver. Error mode: The spa`s intelligent control system continuously monitors and adjusts the status of the system. If the inverter detects unexpected events such as system error or machine error, the lcd display will show the error information and the led light will light up in error mode. Programming mode: Programming mode indicates that the spa system is being updated. The power supply should not be interrupted during the process. The inverter is automatically logged out when the update is complete and switches to another mode. verification mode: Before the spa operates in normal mode, it will switch to self-check mode. If everything is OK then, the system will switch to normal mode. Otherwise, the error mode will respond. Standby mode: If the system has no errors but the conditions are not met, the spa remains in standby mode. Technical data AC rated power: 5000W AC nominal voltage range: 230/400v (310-476V) Frequency range: 50/60Hz, ±5Hz Max. Output current: 7.6A Battery voltage range: 100-550v Max. Charging and discharging current: 25A IP protection class: IP65 Manufacturer's warranty: 10 years Operating temperature range: -25°C - +60°C Maximum efficiency of 97.8% Dimensions: 505 x 453 x 198 mm Weight: 28 kg Scope of delivery 1x Growatt spa 5000tl3 bh-up grid inverter

The Growatt mod 13ktl3-x grid inverter (mpn mod 13ktl3-x) is a 3-phase string inverter and, with its high performance and compactness, ensures simple and user-friendly operation of large Solaranlagen. The inverter is characterized by a high efficiency of up to 98.6%, which makes it a powerful and flexible device when configuring the system. In addition to its 2 independent mppt inputs and a maximum PV power of 19500w, the inverter also has an OLED touch display, which is an advantage for simple and uncomplicated operation. The mod-X series: 2 independent mppts String monitoring Type ii spd on dc and ac side Integrated afci function OLED and touch button DC/AC ratio up to 2.0 Two MPP trackers for optimum solar yields Maximum Power Point Tracker technology is used to generate the best possible yield from a Solarasystem. The mppt determines the optimum ratio between irradiance, module temperature and solar cell type over the course of the day. The two MPP trackers in the mod inverter allow the optimum operating point for the two PV strings to be optimized separately. The two trackers work independently of each other and so, for example, shading on one string would have no effect on the second. Active safety with afci function With an Arc Fault Circuit Interrupter is an arc fault protection device. It protects circuits in the event of arcing faults and acts as a circuit breaker against contact faults in low-voltage installations. I n addition to providing protection, it analyses current and voltage curves using digital signal processing and interrupts circuits in the event of fault signatures. The afci is also known colloquially as a fire protection switch, as overheating at poor contact points or flashovers between two conductors can be prevented by emitted signals. AC&DC type ii spd AC and dc type ii spds (surge protective devices) protect mains inverters against overvoltages and are an important component for the safety and reliability of Solarasystems. AC spds protect the AC side and dc spds protect the DC side of the inverter. These protective devices discharge excess voltage pulses that can be caused by lightning strikes, switching operations in the power grid or other events. Numerous protective functions dc / AC surge arrester: type ii dc reverse polarity protection and disconnector Insulation resistance detection AC short-circuit protection Mains, residual current and string monitoring Stand-alone grid detection afci protection (arc fault detection) Growatt monitoring platform (can be used with optional accessories) The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) and as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. you can configure and monitor all your Growatt products via Shine, and it is also possible to display self-consumption and trends. The following Shine options are compatible with the mod-X/XH series: ShineWiFi-X Shine4G-X ShineLan-X ShineLink-X Technical data Max. PV cable: 19500 W Max. Input voltage: 1100 V Start voltage: 160 V Nominal dc voltage: 580 V mppt voltage range: 140-1000 V Strings per mppt: 2/1 Max. Input current per mppt: 26/13A Max. Short-circuit current per mppt: 32/16 A Rated AC power: 13000 W AC rated voltage range: 220v/380v, 230v/400v (340-440) Frequency range: 50/60 Hz (45-55Hz/55-65Hz) Max. Output current: 21.7 A Dimensions: 425 x 387 x 178 mm Weight: 16 kg Operating temperature range: -25°C - +60°C Protection class: IP66 Scope of delivery 1x Growatt mod 13ktl3-x grid inverter

The Growatt mod 11ktl3-x grid inverter (mpn mod 11ktl3-x) is a 3-phase string inverter and, with its high performance and compactness, ensures simple and user-friendly operation of large Solaranlagen. The inverter is characterized by a high efficiency of up to 98.6%, which makes it a powerful and flexible device when configuring the system. In addition to its 2 independent mppt inputs and a maximum PV output of 16500w, the inverter also has an OLED touch display, which is an advantage for simple and uncomplicated operation. The mod-X series: 2 independent mppts String monitoring Type ii spd on dc and ac side Integrated afci function OLED and touch button DC/AC ratio up to 2.0 Two MPP trackers for optimum solar yields Maximum Power Point Tracker technology is used to generate the best possible yield from a Solarasystem. The mppt determines the optimum ratio between irradiance, module temperature and solar cell type over the course of the day. The two MPP trackers in the mod inverter allow the optimum operating point for the two PV strings to be optimized separately. The two trackers work independently of each other and so, for example, shading on one string would have no effect on the second. Active safety with afci function With an Arc Fault Circuit Interrupter is an arc fault protection device. It protects circuits in the event of arcing faults and acts as a circuit breaker against contact faults in low-voltage installations. I n addition to providing protection, it analyses current and voltage curves using digital signal processing and interrupts circuits in the event of fault signatures. The afci is also known colloquially as a fire protection switch, as overheating at poor contact points or flashovers between two conductors can be prevented by emitted signals. AC&DC type ii spd AC and dc type ii spds (surge protective devices) protect mains inverters against overvoltages and are an important component for the safety and reliability of Solarasystems. AC spds protect the AC side and dc spds protect the DC side of the inverter. These protective devices discharge excess voltage pulses that can be caused by lightning strikes, switching operations in the power grid or other events. Numerous protective functions dc / AC surge arrester: type ii dc reverse polarity protection and disconnector Insulation resistance detection AC short-circuit protection Mains, residual current and string monitoring Stand-alone grid detection afci protection (arc fault detection) Growatt monitoring platform (can be used with optional accessories) The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) and as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. you can configure and monitor all your Growatt products via Shine, and it is also possible to display self-consumption and trends. The following Shine options are compatible with the mod-X/XH series: ShineWiFi-X Shine4G-X ShineLan-X ShineLink-X Technical data Max. PV cable: 16500 W Max. Input voltage: 1100 V Start voltage: 160 V Nominal dc voltage: 580 V mppt voltage range: 140-1000 V Strings per mppt: 1 Max. Input current per mppt: 13A Max. Short-circuit current per mppt: 16 A Rated AC power: 11000 W AC rated voltage range: 220v/380v, 230v/400v (340-440) Frequency range: 50/60 Hz (45-55Hz/55-65Hz) Max. Output current: 18.3 A Dimensions: 425 x 387 x 178 mm Weight: 14 kg Operating temperature range: -25°C - +60°C Protection class: IP66 Scope of delivery 1x Growatt mod 11ktl3-x grid inverter

The spa 10000tl3 bh-up from Growatt is a 3-phase grid inverter that provides a state-of-the-art solution for your solar projects. With three programmable operating modes, a VPP interface and a wide battery voltage range of 100-550v, it offers efficiency and flexibility. In addition, it supports retrofits and new systems and ensures compatibility with high-voltage batteries. about the spa 10000tl3 bh-up inverter 100% three-phase unbalanced output Intelligent power control at phase level Intelligent load control via dry contact Wide battery voltage range 100-550 V UPS function, 10ms transfer VPP interface Programmable operating modes Display via led and lcd Supports lithium and lead-acid batteries Easy installation Intelligent load management The inverter's integrated smart load control enables precise and efficient control of energy consumption. By using a potential-free contact, electrical loads can be controlled intelligently and prioritized. This function enables automatic detection of energy requirements and optimum use of the available energy. Smart load management ensures optimum distribution of energy and thus contributes to efficient use. With intelligent load control via the dry contact, the inverter is able to optimize the energy flow and ensure efficient operation of your Solarasystem. Growatt monitoring platform By using the optional accessories of the Shine series, you can use the Growatt monitoring platform. This platform is available as a smartphone app for iOS and Android as well as a web version. The Shine accessories must be purchased separately, but use of the platform is free of charge. you can configure and monitor all your Growatt products via Shine, and it also allows you to view self-consumption and track trends. The following Shine options are compatible with the spa series: ShineWiFi-X ShineLink-X Shine4G-X ShineMaster Operating modes - Configurable according to system requirements Online mode Users can set a suitable priority mode in online mode according to the request while the spa is working. If the lcd and button settings are used, only one time period can be set. However, if the website settings are used, up to three time periods can be set for the priority mode Load First: With an inverter in the spa system, the energy from the inverter is optimized for the load and then the battery is charged. surplus energy is exported to the grid. Without Inverter or if the energy is low, the battery discharges first for the load and the grid supplies the energy if the battery capacity is insufficient. Battery First: When the spa series operates in this mode, the battery is charged first. This is suitable for periods of low power consumption. The switch-on and switch-off times of the mode and the end time of the battery charge level must be set. It is also possible to set a power that is lower than the maximum output power of the battery. With an inverter in the spa system, the energy from the inverter is first used for the battery, then for the load. The grid supplies the energy if the power of the inverter is not sufficient. Without Inverter or if its power is too low, the battery and the load are supplied by the mains. Grid First: If the spa series is operating in grid-first mode, the energy is fed into the grid first. Time periods can be set when the power consumption is too high. The switch-on and switch-off times of the mode and the end time of the battery charge level must be set here. A power can be set that is lower than the maximum output power of the battery. With an inverter in the spa system, the battery discharges to the load. If the sum of inverter power and battery power is greater than the load, excess energy flows into the grid. Without Inverter or if its energy is too low, the battery discharges to the load and excess energy flows into the grid. Backup mode: If the grid fails, the system switches to backup mode and AC power is output via the eps LOAD port using all the energy from the battery. Note that the maximum output power of the spa in this mode is 10,000w and the load connected to the eps LOAD port should be less than 10,000w. Note: You can only set a time period for "Battery First" and "Grid First" on the lcd. If you want to set more than this, you have to do so via the shineserver. Error mode: The spa`s intelligent control system continuously monitors and adjusts the status of the system. If the inverter detects unexpected events such as system error or machine error, the lcd display will show the error information and the led light will light up in error mode. Programming mode: Programming mode indicates that the spa system is being updated. The power supply should not be interrupted during the process. The inverter is automatically logged out when the update is complete and switches to another mode. verification mode: Before the spa operates in normal mode, it will switch to self-check mode. If everything is OK then, the system will switch to normal mode. Otherwise, the error mode will respond. Standby mode: If the system has no errors but the conditions are not met, the spa remains in standby mode. Technical data AC rated power: 10000W AC rated voltage range: 230/400v (310-476V) Frequency range: 50/60Hz, ±5Hz Max. Output current: 15.2A Battery voltage range: 100-550v Max. Charging and discharging current: 25A IP protection class: IP65 Manufacturer's warranty: 10 years Operating temperature range: -25°C - +60°C Maximum efficiency of 98.2% Dimensions: 505 x 453 x 198 mm Weight: 28 kg Scope of delivery 1x Growatt spa 10000tl3 bh-up grid inverter

With the Growatt mic 2500tl-x string inverter (MPN: mic 2500tl-x), we offer a single-phase inverter that combines high yields with user-friendliness. It is particularly suitable for small PV systems and delivers up to 2500w AC output power. Simply connect it to your Solarasystem via the MC4 connection and you're ready to go. This allows part of the power requirement to be covered cost-effectively. the device can also be monitored and configured on the move using the Shine app or web application via an optional WLAN module. The Growatt mic inverter at a glance Single-phase operation Maximum power point tracking Connect directly to photovoltaic modules Touch button and OLED display Compact design and easy installation 10-year manufacturer's warranty Optionally possible: monitoring with the Shine platform (accessories available for a fee) Why a string inverter? The output of solar modules varies depending on temperature, irradiation and shading, which can lead to so-called mismatching losses. These losses occur as soon as the output of a panel in a row is lower, which leads to lower electricity production for the entire row. A string inverter can reduce these losses. Maximum power point tracking Maximum Power Point Tracking technology is used to generate the best possible yield from a Solarasystem. The mppt of the mic inverter sets the optimum ratio between voltage and current over the course of the day, depending on the solar radiation and the temperature of the solar modules. The large mppt voltage range means that a large number of solar modules can be connected and this enables efficient energy yield, the advantage of which is most noticeable when the sky is partially overcast and the light intensity is constantly changing. Flexible and easy installation Thanks to its compact dimensions and low weight, the inverter is quick and easy to install and connect. Thanks to the integrated MC4 connections, the connection from the solar supply to the inverter is also completed in just a few moments. The numerous protective functions ensure safe and smooth operation of the Solarasystem. Protective devices DC reverse polarity protection DC disconnector DC / AC surge arrester: Type III Insulation resistance detection Earth fault, mains and residual current monitoring AC short-circuit protection Stand-alone grid detection AFCI protection Technical data max. PV power: 3500W max. input voltage: 550V Start voltage: 80V Nominal DC voltage: 360V mppt voltage range: 65V-550V Nominal AC power: 2500w AC rated voltage: 230V Max. Efficiency: 97,6% Operating temperature range: -25°C - +60°C Protection class: IP65 Weight: 6kg Dimensions (H/W/D): 274 x 254 x 138 mm Scope of delivery: 1x Growatt mic 2500tl-x inverter 1x mounting bracket 1x instruction manual

The HMT-1800-6T from Hoymiles is the perfect three-phase micro inverter for your balcony power plant. The compact lightweight (only 5.5kg) is suitable for solar power production with up to 6 solar panels with an output of 405W each. Just like all other micro inverters from Hoymiles, it is suitable for long operating hours and wide PV panel application, as its start-up is very low (only 22V) and the DC input range of the operating voltage (16-60V) is extremely wide. Information on required and optional accessories can be found at the end of the description. Note: The HMT Inverter may only be connected to the mains by an electrician. Properties Minimisation of the effects of e.g. shading, dust or ageing due to MPPT. High-quality energy generation with high MPPT accuracy Optional: system monitoring via the smartphone app S-Miles Enduser or the S-Miles Cloud (data transmission unit DTU-PRO-S is required) Optimum system reliability Peak efficiency of 96.5 12-year product guarantee High level of safety due to integrated protection functions Easy installation Long service life Complies with VDE-R-N 4105: 2018 & EN50549-1:2019 Optimum reliability Micro-inverter systems are inherently more reliable than conventional inverters. The decentralised design of a microinverter system ensures that the entire PV system will not fail in the event of a malfunction. Hoymiles microinverters are designed to operate at full power in ambient temperatures up to +65°C (150°F). The micro-inverter housing is designed for outdoor installation and complies with protection class IP67. Simple structure PV systems with Hoymiles microinverters are very easy to plan and install. Up to 6 solar modules can be connected per model. You do not need to install cumbersome conventional inverters. Each microinverter can be quickly mounted on the PV mounting rack or directly under the PV module. The PV module is connected to the microinverter directly on site, eliminating the risk of people being exposed to dangerously high DC voltage. Technical data Recommended module power: up to 405W (per module) Maximum input voltage: 60V MPPT voltage range: 16-60V Switch-on voltage: 22V Maximum input current: 6x11.5A Mains connection: Three-phase Rated output power (VA): 1800 Rated output current: 2.61 x 3 Rated output voltage / range: 230 V/AC/400 V/AC, 3W+N+PE Rated frequency / range (Hz): 50/45-55 or 60/55-65 Power factor (adjustable): >0.99 standard 0.8 leading ... 0.8 lagging Distortion factor: <3 Maximum units per 10 AWG strand2: 11 Maximum units per 12 AWG strand2: 7 CEC peak efficiency: 96.5 MPPT rated efficiency: 99.8 Power consumption at night (mW): <50 Ambient temperature range: -40~+65°C Dimensions (WxHxD): 330 x 250 x 35 mm Weight: 5.5 kg (including 0.6 m AC cable)Housing rating: IP67 Required HMT accessories You need a T-node with cable for each HMT microinverter.For each HMT microinverter system (one inverter or more), an end cap and an unlocking aid are required at least once.Optionally, a disconnection aid can also be ordered. Scope of delivery 1x Hoymiles HMT-1800-6T micro inverter r

With the Growattstring grid inverter min 3600tl-x (mpn: min 3600tl-x), we offer the optimum solution for your single-phase PV system. It impresses with its high adaptability paired with a remarkable efficiency of 98.2%. The two MPP trackers ensure optimum current yield. The Growatt min 3600tl-x at a glance Two MPP trackers Large mppt voltage range from 80V-550V Touch button and OLED display Type ii spd on DC side Peak efficiency of 98.2% AFCI function Maximum Power Point Tracking By using Maximum Power Point Tracking (mppt) technology, a Solarasystem can achieve the optimum yield. The MIC inverter is equipped with mppt, which adjusts the optimum ratio of voltage and current throughout the day according to the solar radiation and the module temperature of the solar modules. With its wide mppt voltage range, many solar modules can be connected, enabling efficient energy generation. This advantage is particularly evident when the sky is partly cloudy and the light intensity is constantly changing. Arc detection (AFCI) In the event of incorrect installation or damage to your PV modules, plugs or cables, so-called electric arcs and resulting fires can occur. To prevent these without delay, the specialists at Growatt have developed an arc detection system that can be installed as an option. This guarantees a higher level of safety for you and your PV system. Why a string inverter? Different environmental conditions such as temperature, irradiation and shading can lead to variable power differences between solar modules, known as mismatch losses. These losses occur when one solar module in a row has a lower output, resulting in an overall reduction in power production for the entire row of modules. A string inverter can help minimize these losses and optimize the efficiency of the entire solar power system. Growatt monitoring platform The Growatt monitoring platform can be used to keep track of all the data collected. The following solutions from the Shine series, which can also be purchased, are suitable for this purpose: ShineWiFi-X Shine4G-X ShineLan-X ShineLink-X The free-to-use monitoring platform is available as a smartphone app (for iOS and Android) and as a web version. you can configure and monitor all your Growatt products via Shine; it is also possible to display self-consumption and trends. Numerous protection functions DC/AC surge arrester: type ii / type iiI DC reverse polarity protection and disconnector Insulation resistance detection AC short-circuit protection Open-circuit, mains and residual current monitoring Stand-alone grid detection AFCI protection Technical data max. PV power: 5040W max. input voltage: 550V Start voltage: 100V nominal DC voltage: 360V mppt voltage range: 80V-550V AC nominal power: 3600W AC rated voltage: 230V AC mains frequency: 50/60 Hz max. output current: 16 A max. efficiency: 98.2% Protection class: IP65 Dimensions: 375 x 350 x 160 mm Weight: 10.8 kg Scope of delivery: 1x Growatt min 3600tl-x single-phase mains inverter

Compact and easy to handle: The Growatt mid 30ktl3-x (mpn: mid 30ktl3-x) is the ideal inverter solution for commercial and industrial pv systems. The smart inverter is easy to operate and maintain thanks to a touch button and an OLED display. It has an efficiency of 98.8%.The Growatt mid at a glanceThree maximum power point trackersthree-phase operationType ii spd on dc and AC sidesIntelligent string monitoringTouch button and OLED display10-year manufacturer's warrantyOptionally possible: monitoring with the Shine platform (accessory available at extra cost)Maximum power point trackingMppt technology optimizes the relationship between voltage and current to generate maximum energy. The mid inverter uses mppt to extract the maximum power from the solar modules, which is particularly useful when light intensity fluctuates. The wide mppt voltage range of the inverter enables efficient energy generation and the use of a large number of solar modules.Arc detection (AFCI)If your pv modules, plugs or cables are incorrectly installed or damaged, so-called electric arcs can occur, which can cause fires. To quickly prevent such fires, Growatt has developed an optional arc detection function. This function can be installed and ensures a higher level of safety for you and your pv system.Intelligent string monitoringThanks to the ability to take targeted action against faults in individual strings, intelligent string monitoring significantly increases efficiency. For example, if panels or contacts and cabling are defective, the system reacts immediately.Growatt monitoring platformThe Growatt monitoring platform can be used with the optional accessories from the Shine series. This is available both as a smartphone app for iOS and Android and as a web version. The Shine accessories must be purchased separately, but use of the platform is free of charge. With Shine, you can configure and monitor all your Growatt products and view your own consumption and trends.The following Shine options are compatible with the mid series:Shine WiFi-X/ ShineLan-X/Shine4G-XShineLink-XShineMasterSEMTechnical dataInput (DC)max. pv power (stc): 45000Wmax. input voltage: 1100VStart voltage: 250Vnominal dc voltage: 600Vmppt voltage range: 200V-1000VNumber of independent MPP trackers: 3Number of strings per MPP tracker: 2max. input current per MPP tracker: 26 Amax. short-circuit current per MPP tracker: 32 AOutput (AC)AC rated power: 30000 WÁC rated voltage (range): 220v/380v, 230v/400v (340-440V)AC mains frequency: 50/60 HzMax. Output current: 50.5 AGeneralMax. Efficiency: 98.8 %Dimensions: 580 x 435 x 230 mmWeight: 29.5 kgOperating temperature range: -35°C - +60°CSelf-consumption (night): <1WProtection class: IP66Scope of delivery:1x Growatt mid 25-40ktl3-x grid inverter

The Growatt mod 3ktl3-x grid inverter (mpn mod 3ktl3-x) is a 3-phase string inverter and, with its high performance and compactness, ensures simple and user-friendly operation of large Solarasystems. The inverter is characterized by a high efficiency of up to 98.3 %, which makes it a powerful and flexible device when configuring the system. In addition to its 2 independent mppt inputs and a maximum PV output of 4500w, the inverter also has an OLED touch display, which is an advantage for simple and uncomplicated operation. The mod-X series: 2 independent mppts String monitoring Type ii spd on dc and ac side Integrated afci function OLED and touch button DC/AC ratio up to 2.0 Two MPP trackers for optimum solar yields Maximum Power Point Tracker technology is used to generate the best possible yield from a Solarasystem. The mppt determines the optimum ratio between irradiance, module temperature and solar cell type over the course of the day. The two MPP trackers in the mod inverter allow the optimum operating point for the two PV strings to be optimized separately. The two trackers work independently of each other and so, for example, shading on one string would have no effect on the second. Active safety with afci function With an Arc Fault Circuit Interrupter is an arc fault protection device. It protects circuits in the event of arcing faults and acts as a circuit breaker against contact faults in low-voltage installations. I n addition to providing protection, it analyses current and voltage curves using digital signal processing and interrupts circuits in the event of fault signatures. The afci is also known colloquially as a fire protection switch, as overheating at poor contact points or flashovers between two conductors can be prevented by emitted signals. AC&DC type ii spd AC and dc type ii spds (surge protective devices) protect mains inverters against overvoltages and are an important component for the safety and reliability of Solarasystems. AC spds protect the AC side and dc spds protect the DC side of the inverter. These protective devices discharge excess voltage pulses that can be caused by lightning strikes, switching operations in the power grid or other events. Numerous protective functions dc / AC surge arrester: type ii dc reverse polarity protection and disconnector Insulation resistance detection AC short-circuit protection Mains, residual current and string monitoring Stand-alone grid detection afci protection (arc fault detection) Growatt monitoring platform (can be used with optional accessories) The Growatt monitoring platform can be used with the optional Shine series accessories. This is available as a smartphone app (for iOS and Android) and as a web version. The Shine accessories must be purchased separately, use of the platform is free of charge. you can configure and monitor all your Growatt products via Shine, and it is also possible to display self-consumption and trends. The following Shine options are compatible with the mod-X/XH series: ShineWiFi-X Shine4G-X ShineLan-X ShineLink-X Technical data Max. PV cable: 4500 W Max. Input voltage: 1100 V Start voltage: 160 V Nominal dc voltage: 580 V mppt voltage range: 140-1000 V Max. Input current per mppt: 13A Max. Short-circuit current per mppt: 16 A Rated AC power: 3000 W AC rated voltage range: 220v/380v, 230v/400v (340-440) Frequency range: 50/60 Hz (45-55Hz/55-65Hz) Max. Output current: 5 A Dimensions: 425 x 387 x 147 mm Weight: 12.5 kg Operating temperature range: -25°C - +60°C Protection class: IP66 Scope of delivery 1x Growatt mod 3ktl3-x grid inverter

Compact and easy to handle: The Growatt mid 20ktl3-x (mpn: mid 20ktl3-x) is the ideal inverter solution for commercial and industrial pv systems. With a weight of 23 kg, the smart inverter is up to 40% lighter than comparable devices and is easy to operate and maintain thanks to a touch button and OLED display. It also has an efficiency of 98.75%.The Growatt mid at a glanceTwo maximum power point trackersthree-phase operationCompact and 40% lighterType ii spd on dc and AC sidesIntelligent string monitoringTouch button and OLED display10-year manufacturer's warrantyOptionally possible: monitoring with the Shine platform (accessories available at extra cost)Maximum power point trackingMppt technology optimizes the relationship between voltage and current to generate maximum energy. The mid inverter uses mppt to extract the maximum power from the solar modules, which is particularly useful when light intensity fluctuates. The wide mppt voltage range of the inverter enables efficient energy generation and the use of a large number of solar modules.Arc detection (AFCI)If your pv modules, plugs or cables are incorrectly installed or damaged, so-called electric arcs can occur, which can cause fires. To quickly prevent such fires, Growatt has developed an optional arc detection function. This function can be installed and ensures a higher level of safety for you and your pv system.Intelligent string monitoringThanks to the ability to take targeted action against faults in individual strings, intelligent string monitoring significantly increases efficiency. For example, if panels or contacts and cabling are defective, the system reacts immediately.Growatt monitoring platformThe Growatt monitoring platform can be used with the optional accessories from the Shine series. This is available both as a smartphone app for iOS and Android and as a web version. The Shine accessories must be purchased separately, but use of the platform is free of charge. With Shine, you can configure and monitor all your Growatt products and view your own consumption and trends.The following Shine options are compatible with the mid series:Shine WiFi-X/ ShineLan-X/Shine4G-XShineLink-XShineMasterSEMTechnical dataInput (DC)max. pv power (stc): 30000Wmax. input voltage: 1100VStart voltage: 250Vnominal dc voltage: 580Vmppt voltage range: 160V-1000VNumber of independent MPP trackers: 2Number of strings per MPP tracker: 2max. input current per MPP tracker: 27Amax. short-circuit current per MPP tracker: 33.8 AOutput (AC)AC rated power: 20000 WÁC rated voltage (range): 220v/380v, 230v/400v (340-440V)AC mains frequency: 50/60 HzMax. Output current: 31.9 AGeneralMax. Efficiency: 98.75 %Dimensions: 525 x 395 x 222 mmWeight: 23kgOperating temperature range: -25°C - +60°CSelf-consumption (night): <1WProtection class: IP65Scope of delivery:1x Growatt mid 17-22ktl3-x grid inverter