‹ back to overview page

Victron Quattro 48/8000/110 48V 230V 6500W Inverter 110A Battery Charger


sku: 1-67-009120

In stock – delivery time 2-5 Werktage

Shipping weight per item: 41.00 kg
shipping with: DHL Paket
€3,564.29
Incl. 19% Tax, excl. Shipping Cost
OR
Mo – Fr: 08.00 – 18.00 Uhr

Fragen oder Änderungswünsche?

Description

The Quattro 48/8000/110-100/100 (MPN QUA488020000) is a combination of a 48V 6500W sine inverter, a powerful battery charger and a transfer-switch.
It is equipped with 2 AC-outputs and 2 AC-inputs and therefore can be connected to 2 separate AC-sources, for example the public grid or a generator. The Quattro connects automatically to the active source.

The integrated battery charger provides 110A which allows quick charging even for bigger batteries as long as there is a grid connection.
The 48V sine inverter converts your DC battery current into a 230V AC current. Thanks to a pure sine wave this inverter is also suitable for sensitive electronic devices. Besides those two components there is also an integrated transfer-switch that enables you to realize many grid-tied solutions.
Integrating the Quattro into your system can be done via VE.Bus-port or 2 COM-port which allows nearly unlimited networking.

Extremely flexible thanks to 2 AC-input and 2 AC-outputs
The main output ensures uninterrupted operation. In case of a blackout or a failure in the grid/generator the Quattro takes over the supply of connected consumers. Switching happens so fast (<20ms) that the uninterrupted supply of computers and other electronic devices is ensured.
The second output only provides power if AC-power is available on one of the inputs. Consumers that must not discharge the battery - for example water boilers - can be connected to that output.

Important details:

  • 6500W constant output and 16.000W peak current, for 48V battery voltage
  • combination of inverter with transfer switch and 110A battery charger
  • provides pure 230V sine voltage at 50Hz
  • 2x AC-inputs with intergerated transfer-switch / 2 x 100A max. switch-current
  • 2x AC-outputs + 1 additional output that only works when AC-power is available on one of the AC-inputs.
  • VE.Bus communication port allows extensive possibilities in terms of connection, configuration and controlling of Victron Quattro devices
  • supports three-phase operation (3 units of the same model needed)
  • supports parallel operation - up to 6 units can be connected parallely to increase system power if needed
  • besides the VE.Bus-port Quattro devices come with 2 additional COM-ports which allow nearly unlimited system integration
  • PowerControl-function allows operation with limited generator performance as well as supply through limited shore or grid power
  • PowerAssist-function allows a 'performance-increase' of generators and supports shore power connection if needed
  • usable as UPS-solution (uninterrupted power supply) thanks to the integrated transfer-switch with 16A or 50A
  • usable for grid-tied systems which only drain power from the supplier when the battery current is not sufficient or other programmable events have happened
  • 3 separate relays - each programmable
  • compatible with many Victron control- and monitoring-panels
  • very high efficiency and low consumption

Massive performance extension
Up to 6 Quattros can be connected parallely. This creates a system with 6 48/10000/140 units 54 kW/60 kVA performance or 840A charging current. Three units can be configured for three-phase operation. But that's not all:
It is possible to connecte 6 x three-phase systems parallely to generate a massive inverter performance of 162 kW/180 kVA and over 2500A charging capacity.

PowerControl - operation with limited generator performance, shore or grid power
The Quattro is a powerful battery charger which drains a lot of power (nearly 10A/5kVA Multi at 230V AC) from the generator or grid. With help of the MultiControl panel you can adjust the max. power drained from the generator or grid. The Quattro then priors other connected AC-consumers and uses only the "surplus" of energy for charging.
This protects the generator or grid from an overload.

PowerAssist - performance-increase of generators and shore power connection
With this function PowerControl is put to a new dimension by enabling the Quattro to support small-dimensioned power sources. Load-peaks often occure only within limited periods. In this case the Quattro ensures that weak shore- or generator power is compensated instantly through battery power.

BackUp-System: AC-power also during blackouts
The Quattro can be integrated in off-grid systems, grid-tied PV-systems and systems using alternative energy sources. A software that detects blackouts and grid failures is also available.

Easy configuration
If setting of a device have to be changed this can be done with help of a DIP-switch within minutes.
Parallel-connected and three-phase systems can be configured via VE.Bus QuickConfigure and VE.Bus System Configurator software.

Monitoring and controlling on site
There are several option: battery protector, MultiControl panel, VE.Net Blue Power panel, Color Control Panel, smartphone or tablet (Bluetooth Smart), notebook or computer (USB or RS232).

Remote monitoring and controlling
Victron Ethernet Remote, Victron Global Remote and the Color Control Panel allow remote maintenance and monitoring of the Quattro. Addiationally system data can be saved for free on the VRM (Victron Remote Management) website.

Remote configuration
If the system is connected to the ethernet via the ColorControl-panel you are able to change settings remotely.

Delivery scope:
1x Victron QUA488020000 Quattro 48/8000/110-100/100 Combination of 48V 6500W sine inverter and 48V 110A battery charger + 2 AC-inputs with integrated transfer-switch
1x Manual

data sheet

General
SKU 1-67-009120
Constant AC-performance 6500W
Voltage Control 48V DC / 230V AC
No-Load Self-Consumption 50W
Standby Self-Consumption 20W
Temperature Range VE.Bus
Anzahl Batterieausgänge Male
Battery Voltage 48V
Protection IP IP21
Rated Output Voltage 230V AC / Wechselstrom
quality of power echte Sinuswelle
Frequency Range 50Hz / +-0,1Hz
Manufacturer's Unit Number QUA488020000
Product Type Gerätekombination bestehnd aus 48V zu 230V Sinus Spannungswandler, Batterielader und Transferschalter. Im Vergleich zur Multiplus Serie vergfügen aller Quattras über 2 schaltbare AC Eingänge und 2 AC-Ausgänge.
grid-transferswitch included? Ja - 2 Stück
Manufacturer Victron Energy
Weight 50 kg
transferswitch-power 2x 100A
EAN 8719076024262

eKomi ratings

This Product has not been rated yet Aktuell sind noch keine Ekomi Bewertungen zu diesem Produkt vorhanden. Wenn Sie das Produkt gekauft haben, erhalten Sie von Ekomi 7 Tage nach dem Kauf eine Email mit der Bitte das Produkt zu bewerten. Wir würden uns sehr über Ihre Erfahrung und Bewertung zu Victron Quattro 48/8000/110 48V 230V 6500W Inverter 110A Battery Charger freuen.