The fsp-2 195w 12v is the second largest and newest member of the Offgridtec fsp family and is also one of the most powerful foldable solar modules in the range. It has a 3-sided design and comes with a matching connection kit that allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged. Performance that sets standards The fsp-2 195w Ultra is equipped with American SPR back-contact cells from a well-known manufacturer. The look of the cells is completely black, which also gives the fsp-2 180w a very modern, high-quality look. The SPR cells ensure a very high efficiency of the panel and set new standards in this power class in combination with the low weight and compact dimensions of the fsp-2 panel. extensive application possibilities: excellent usable in the camping area or for expeditions, climbing tours and much more... for vehicles and boats without fixed solar installation ... and numerous other applications in different areas... technical highlights fsp-2 195w ultra foldable solar panel Rated power: 195wp Number of sides: 3 x 69wp Module voltage (Vmp): 33,5 V Max. Charge current (Imp): 5,82 A Open circuit voltage (Voc): 39,4 V Short circuit current (Isc): 6,17 A Dimensions closed: 820 x 440 x 40 mm Dimensions open designed: 820 x 1545 x 6 mm Weight: 8,2 Kg ETFE coating SunPower high performance cells 6.0m 5mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side 0.5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) 1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on battery side Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse Including Victron SmartSolar 75/15 charge controller The Smartsolar 75/15 from Victron Energy (mpn scc075015060r) is a mppt solar charge controller with 15a max charge current for charging 12v and 24v batteries. Unlike the Bluesolar 75/15, the Smart version has integrated Bluetooth, which eliminates the need to purchase a Bluetooth dongel. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control gx or the mppt Control. The integrated Bluetooth in the SmartSolar series is the wireless solution to setup, monitor and update the controller using Apple and Android smartphones, tablets or other devices. The most important technical features at a glance 15a load output high peak efficiency of 98 freely programmable battery charging algorithm (via the free Victron Connect APP) Light dimming functions programmable (via the free Victron Connect APP) Ultra fast maximum power point tracking max. PV open circuit voltage: 75V Charging algorithm: multi-stage, adaptive integrated Bluetooth module Dimensions: 100 x 113 x 40 mm Weight: 0,5 kg The included Profi-Connection Kit The included connection kit provides everything needed to get the mobile solar set up and running quickly. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller. For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal alligator clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse. Customizable on request All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred. about the fsp-2 series As with all Offgridtec solar module series, great emphasis has been placed on high quality and durability in the fsp series. The fsp 2 195w Ultra uses back-contacted solar cells like those used in our SP high performance series. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, the complete fsp 2 series is coated with ETFE for better protection and very high light transmission. Furthermore, we produce our solar modules according to current norms and standards, which together with the high quality materials makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions. Scope of delivery 1x Offgridtec fsp-2 195w 12v, 3-01-012680 with Victron SmartSolar 75/15 mppt charge controller 1x Offgridtec fsp-2 connection kit  

The fsp-2 195w 12v is the second largest and newest member of the Offgridtec fsp family and is also one of the most powerful foldable solar modules in the range. It has a 3-sided design and comes with a matching connection kit that allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged. Performance that sets standards The fsp-2 195w Ultra is equipped with American SPR back-contact cells from SunPower. The look of the cells is completely black, which also gives the fsp-2 195w a very modern, high-quality look. The SPR cells ensure a very high efficiency of the panel and set new standards in this power class in combination with the low weight and compact dimensions of the fsp-2 panel. extensive application possibilities: excellent usable in the camping area or for expeditions, climbing tours and much more... for vehicles and boats without fixed solar installation ... and numerous other applications in different areas... technical highlights fsp-2 195w ultra foldable solar panel Rated power: 195wp Number of sides: 3 x 65 Wp Module voltage (Vmp): 33,5 V Max. Charge current (Imp): 5,82 A Open circuit voltage (Voc): 39,4 V Short circuit current (Isc): 6,17 A Dimensions closed: 820 x 440 x 40 mm Dimensions open designed: 820 x 1545 x 60 mm Weight: 7,12 Kg ETFE coating SunPower high performance cells 6.0m 5mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side 0.5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) 1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse the included Profi-Connection Kit The connection kit included in the scope of delivery offers everything needed for a quick start-up of the mobile solar set. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller. For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal crocodile clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse. customizable on request All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred. about the fsp-2 series As with all Offgridtec solar module series, high quality has been emphasized in the fsp-2 series. The fsp-2 195w works with highly effective solar cells. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, the complete fsp-2 series is coated with ETFE coating, which provides better protection and at the same time ensures very high light transmittance. Furthermore, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions. Scope of delivery 1x Offgridtec fsp-2 195w 12v, 3-01-012680 1x Offgridtec fsp-2 Connection-Kit

The FSP-Max 440w from Offgridtec (mpn 014560) is a foldable high-end solar module with connection kit, as well as firmly integrated fold-out supports, in order to be able to set up the module easily and everywhere at a 45 degree angle. The module is equipped with high-efficiency monocrystalline solar cells and delivers 440w of solar power in optimal orientation and sunshine. The combination of the compact dimensions when closed and the low total weight of just under 13kg sets new standards in terms of flexibility and efficiency of mobile solar modules. The supply of mobile or permanently installed energy storage units is thus possible flexibly and easily. The solution for solar-assisted mobile battery charging In the camping area For expeditions For vehicles and boats without fixed solar installation For off-grid power supply at home And numerous other applications in a wide variety of areas Important features: High output power Compatible with a wide range of 1-2.5 kWh mobile power stations Made of high quality polymer composite Quickly assembled and connected Cell efficiency of over 22 Compact dimensions With practical carrying handle and protective bag Easy to use anywhere Four feet are permanently attached to the solar case, which can be easily folded out if necessary to place the panel on the ground at a bang 45 degrees. Thus, the module is fully assembled and ready for use within a minute. The angled orientation ensures an ideal solar yield. In combination with the low weight, the folding module with the compact dimensions and the practical carrying handle is suitable for many different applications and is without much effort, quickly ready for use. The included Profi-Connection Kit The connection kit included in the scope of delivery contains everything that is needed for a quick start-up of the mobile solar module. It has a 6m connection cable, which is equipped with a high-quality Anderson connector at one end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of your charge controller and is equipped with the corresponding Anderson connector on the other end. This allows you to connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller. For the connection of the charge controller to your battery, a 1m long plug&play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal alligator clips on the battery side, ,which can be easily connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with appropriate fuse. With the 6m connection cable can, with a suitable adapter, also be connected to a suitable power station (with integrated charge controller) Technical data Rated power (Pmax): 440w (4x110W) Module voltage (Vmp): 40v Module current max (Imp): 11a Open circuit voltage (Voc): 48v Short circuit current (Isc): 12a Max. System voltage: 200V/DC Cell efficiency: 22.62% Cell type: Monocrystalline Weight: 13.2kg Dimensions closed: 1072 x 547 x 90 mm Dimensions opened: 1072 x 2188 x 22.5 mm Scope of delivery: 1x Offgridtec FSP-Max 440w foldable solar panel 1x professional connection kit 1x protective bag

The fsp-2 225w 12v is the largest member of the Offgridtec fsp family and is also one of the most powerful foldable solar modules in the range. It has a 5-sided design and comes with a matching connection kit, which allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged. The fsp-2 225w 12v can be ordered in three variants. Offgridtec is also happy to customize any fsp module in terms of cable set and charging technology on request. The connection kit is stored in a lockable bag, directly on the module. So you always have a ready to use small power plant at your side. Performance that sets standards The fsp-2 225w Ultra is equipped with American SPR back-contact cells from a well-known manufacturer. The cells are completely black, which gives the fsp-2 225w a very modern, high-quality look. The SPR cells provide a very high efficiency of the panel and set in combination with the low weight and compact dimensions of the fsp-2 panel new standards in this power class. extensive application possibilities: excellent usable in the camping area or for expeditions, climbing tours and much more... for vehicles and boats without fixed solar installation ... and numerous other applications in different areas... technical highlights fsp 2 225w ultra foldable solar panel Rated power: 225wp Number of sides: 5 x 45 Wp Module voltage (Vmp): 37,2V Max. Charge current (Imp): 6,05A Open circuit voltage (Voc): 43,7V Short circuit current (Isc): 6,41A Dimensions closed: 560 x 440 x 20 mm Dimensions open designed: 560 x 2430 x 8 mm Weight: 6 kg ETFE coating SunPower high performance cells 6.0m 2x6mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side 0.5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) 1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse the included Profi-Connection Kit The connection kit included in the scope of delivery offers everything needed for a quick start-up of the mobile solar set. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller. For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal alligator clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse. customizable on request All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred. about the fsp-2 series As with all Offgridtec solar module series, great emphasis has been placed on high quality and durability in the fsp series. The fsp 2 225w Ultra uses back-contacted solar cells like those used in our SP high performance series. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, the complete fsp 2 series is coated with ETFE for better protection and very high light transmission. Furthermore, we produce our solar modules according to current norms and standards, which together with the high quality materials makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions. Scope of delivery 1x Offgridtec FSP-2 225W 12/24V, 3-01-010765 1x 6m 2x6mm² module connection with Anderson SB50 connector 1x Offgridtec FSP-2 Connection-Kit

The fsp-2 225w ultra kit 12v is a combination of the foldable 225w fsp-2 solar panel and smart latest generation mppt controller. The fsp-2 225w is one of the newest models in the family and also one of the most powerful foldable solar modules currently available. It has a 2-sided design and comes with a matching connection kit that allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged. When it comes to charging technology, we rely on the high-quality Victron Smart-Solar 75/15 charge controller for the fsp-2 225w kit mppt. A high quality device which can be conveniently controlled via Bluetooth and a free app and is also equipped with a 15a load output for dc consumers. The connection kit is housed in a lockable bag, directly on the module. So you always have a ready-to-use, small power plant at your side. Performance that sets standards The fsp-2 225w Ultra is equipped with American SPR back-contact cells from a well-known American manufacturer. The cells are completely black, which gives the fsp-2 225w a very modern, high-quality look. The SPR cells ensure a very high efficiency of the panel and, in combination with the low weight and compact dimensions of the fsp-2 panel, set new standards in this power class. extensive application possibilities: excellent usable in the camping area or for expeditions, climbing tours and much more... for vehicles and boats without fixed solar installation ... and numerous other applications in different areas... technical highlights fsp 2 225w ultra foldable solar panel Rated power: 225wp, number of sides: 5 x 45 Wp Dimensions closed: 560 x 440 x 20 mm, open designed: 560 x 2430 x 8 mm Lightweight: only 6 kg weight incl. mppt charge controller 75/15 15a and Bluetooth for configuration via free app 15a load output for dc 12v power consumers equipped with high-end solar cells, made in USA Module voltage (Vmp): 37,2V max. charging current (Imp): 6,05A Open circuit voltage (Voc): 43,7V Short circuit current (Isc): 6,41A 6.0m 2x6mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side 0.5m 5mm² connecting cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) 1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on battery side Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fusethe supplied Profi-Connection Kit The connection kit included in the scope of delivery provides everything needed for quick commissioning of the mobile solar set. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller. For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal crocodile clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse. Including Victron SmartSolar mppt 75/15 charge controller The Smartsolar 75/15 from Victron Energy (mpn scc075015060r) is a mppt solar charge controller with 15a max charge current for charging 12v and 24v batteries. Unlike the BlueSolar 75/15, the Smart version has built-in Bluetooth, eliminating the need to purchase a Bluetooth dongle. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control gx or the mppt Control. The integrated Bluetooth in the SmartSolar series is the wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. The most important technical features of the charge controller at a glance 15a load output high peak efficiency of 98 freely programmable battery charging algorithm (via the free Victron Connect app) Light dimming functions programmable (via the free Victron Connect app) Ultra fast maximum power point tracking max. PV open circuit voltage: 75V Charging algorithm: multi-stage, adaptive integrated Bluetooth module Dimensions: 100 x 113 x 40 mm Weight: 0,5 kg customizable on request All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred. about the fsp-2 series As with all Offgridtec solar module series, great emphasis has been placed on high quality and durability in the fsp series. The fsp 2 225w Ultra uses back-contacted solar cells like those used in our SP high performance series. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions. Scope of delivery 1x Offgridtec FSP-2 225W 12V, 3-01-010765 1x Victron Energy scc075015060r Smartsolar mppt 75/15 15a 12v 24v solar charge Controller 1x 6m 2x6mm² module Connection Anderson SB50 connector 1x Offgridtec FSP-2 Connection-Kit

The 100w solar bag from Offgridtec (mpn 012715) is a portable solar module and suitable for those who value flexibility. The module is foldable, lightweight and space-saving, making it suitable for many applications. It can be placed horizontally or at a 45° angle using the integrated supports to ensure the best possible solar yield. In good weather, the module can generate approximately 500-550Wh of energy per day. Due to the integrated usb-connectors in the handle, you can also charge small consumers without charge controller and battery. The Offgridtec solar bag is therefore the ideal companion for the spontaneous camping trip and the perfect addition to your outdoor equipment. Features Rated power: 100w High efficiency of 22.3% 2x usb 5v 2a connectors for direct charging Robust and water repellent fabric 5 meter connection cable with Anderson Powerpole connector 1.5 meter battery connection cable with 10a fuse Stand feet with ring eyelets Always ready for use You will achieve the greatest benefit with the solar bag in combination with a charge controller and a battery to store the generated energy. But also solo the foldable module is always ready for use. Through the two usb 5v connections you can charge your cell phone or other small consumers via usb directly at the module. The connections are located directly in the handle of the module, so it is ideal for the spontaneous camping trip. High quality workmanship The 100w solar bag from Offgridtec is both robust and space-saving, giving you a high degree of flexibility. The durable and water-resistant polyamide fabric makes the solar bag the ideal companion for camping trips. As with all Offgridtec solar modules, the solar bag is designed with high quality and durability in mind. We produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver top technical performance even under the most adverse conditions. Flexible alignability The Offgridtec solar pocket can be aligned to match the position of the sun at any time to generate optimal yields throughout the day. Thanks to the integrated supports, the module is positioned at a 45° angle and can thus capture the last rays of the sun even in spring and autumn, when conventional solar panels produce only low currents due to flat sun angles. Its light weight and integrated handles make it easy to transport and ready for use at any time. Technical data: Rated power: 100w Module voltage (Vmp): 20V Max. Charge current (Imp): 5.06A Open circuit voltage (Voc): 23.3V Short circuit current (Isc): 5.45A Cell efficiency: 22.3% Max. System voltage: 200 VDC Tolerance: ±3% Temperature coefficient: -0.38%/°C Dimensions closed: 605 x 535 x 45 mm Dimensions opened: 1200 x 535 x 22.5 mm Weight: 4.85 kg incl. carrying bag Connection Kit included Scope of delivery: 1x Offgridtec solar bag 100w 1x 5 meter connection cable with Anderson Powerpole plug 1x 1,5 meter battery connection cable with 10a fuse

The fsp-2 135w ultra mppt kit 12v is a combination of the foldable 135w fsp-2 solar panel and a latest generation smart mppt controller. The fsp-2 135w is one of the newest models in the family and also one of the most powerful foldable solar panels available. It has a 3-sided design and is delivered with a matching Connectino Kit with which you can quickly and easily establish a connection to the charge controller and the battery to be charged. In terms of charging technology, we rely on the fsp-2 135w kit mppt on the high-quality Victron Smart-Solar 75/15 charge controller. A high quality device which can be conveniently controlled via Bluetooth and a free app and is also equipped with a 15a load output for DC consumers. The connection kit is housed in a lockable bag, directly on the module. So you always have a ready-to-use, small power plant at your side. Performance that sets standards The fsp-2 135w Ultra is equipped with American SPR back-contact cells from a well-known manufacturer. The look of the cells is completely black, which additionally gives the fsp-2 135w a very modern, high-quality look. The SPR cells ensure a high efficiency of the panel and, in combination with the low weight and compact dimensions of the fsp-2 panel, set new standards in this power class. Extensive range of applications: Excellent for use in camping applications Or for expeditions, climbing tours, etc For vehicles and boats without fixed solar installation And numerous other applications in different areas Technical highlights fsp-2 135w solar panel Rated power: 135wp, number of sides: 3 x 45 Wp Dimensions closed: 560 x 440 x 20 mm; open designed: 560 x 1545 x 6 mm Weight module: 4,8 kg equipped with high-end solar cells Module voltage (Vmp): 19,8v - Max. Charge current (Imp): 6.82A Open circuit voltage (Voc): 23.3v - Short circuit current (Isc): 7.22A ETFE coating SunPower high power cells 6.0m 2x6mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side 0.5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) 1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse Including Victron SmartSolar mppt 75/15 charge controller The Smartsolar 75/15 from Victron Energy (mpn scc075015060r) is a mppt solar charge controller with 15a max charge current for charging 12v and 24v batteries. Unlike the BlueSolar 75/15, the Smart version has built-in Bluetooth, eliminating the need to purchase a Bluetooth dongle. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control gx or the mppt Control. The integrated Bluetooth in the SmartSolar series is the wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. The most important technical features of the charge controller at a glance 15a load output high peak efficiency of 98 freely programmable battery charging algorithm (via the free Victron Connect app) Light dimming functions programmable (via the free Victron Connect app) Ultra fast maximum power point tracking max. PV open circuit voltage: 75V Charging algorithm: multi-stage, adaptive integrated Bluetooth module Dimensions: 100 x 113 x 40 mm Weight: 0,5 kg The included Profi-Connection Kit The included connection kit provides everything needed to get the mobile solar set up and running quickly. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller and is also equipped with an Anderson connector on the other side. This allows you to quickly connect or disconnect the controller at any time using the Anderson connectors without having to unscrew the cables from the charge controller. For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal alligator clips on the battery side, which are compatible and can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse. Customizable upon request All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred. about the fsp-2 series As with all Offgridtec solar module series, great emphasis has been placed on high quality and durability in the FSP series. The fsp-2 135w Ultra uses back-contacted solar cells like those used in our SP high performance series. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, the complete fsp-2 series is coated with an ETFE coating, which provides better protection and at the same time ensures a very high light transmission. Furthermore, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions. Scope of delivery: 1x Offgridtec FSP-2 135W 12V 1x Victron Energy SCC075015060R SmartSoalr MPPT 75/15 15A 12V 24V Solar Laderegler 1x 6m 2x6mm² module Connection cable with Anderson SB50 connector 1x Offgridtec FSP-2 Connection-Kit

The fsp-2 135w Ultra is a foldable high-end solar panel with battery connection clamps as well as 3 integrated fold-out supports that allow you to easily set up the fsp-2 panel anywhere at a 45 degree angle. The fsp-2 Ultra is the successor of our mp-105w and is equipped with highly effective solar cells and provides a full 120w of solar power at optimal orientation and sunshine. Together with the very compact dimensions when folded and the low overall weight, the fsp-2 sets new standards in flexibility and efficiency among mobile, foldable solar modules. The price of the new Offgridtec fsp-2 Ultra also sets standards among comparable panels and stands up to any comparison. The basic solution for solar-assisted, mobile charging of batteries up to max. 200Ah: in the camping area for expeditions for vehicles and boats without fixed solar installation and numerous other applications in different areas Technical data foldable solar panel fsp-2 135w Ultra Rated power: 135wp Module voltage (Vmp): 19.8V Max. Charging current (Imp): 6,82A Open circuit voltage (Voc): 23.3V Short circuit current (Isc): 7,22A Charge controller: not included Dimensions closed: 560 x 440 x 20 mm Dimensions open designed: 560 x 1545 x 6 mm Weight: 4,8 kg ETFE coating SunPower high performance cells 6.0m 2x6mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side 0,5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) 1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse The included Profi-Connection Kit The connection kit included in the scope of delivery offers everything needed for a quick start-up of the mobile solar set. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller. For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal alligator clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse. Easy to set up thanks to 3 firmly integrated feet Three feet are sewn to the pocket of the fsp, which can be easily folded out to place the panel on the ground at an angle of 45 degrees. Thus, the module is fully assembled and ready for use within one minute. Customizable on request All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred. about the fsp-2 series As with all Offgridtec solar module series, the fsp-2 series is designed with high quality in mind. The fsp-2 120 uses high performance solar cells from SunPower. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, the complete fsp-2 series has an ETFE coating, which provides better protection and at the same time ensures very high light transmission. Furthermore, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions. Lieferumfang: 1x Offgridtec FSP-2 135W 12V 1x 6m 2x6mm² modul Connection calbe with Anderson SB50 connector 1x Offgridtec FSP-2 Connection-Kit

The EcoFlow 400w solar bag (mpn 50051001) is the perfect complement to the EcoFlow Delta Powerstations. With an output of 400w, it is one of the most powerful foldable solar panels on the market. Weighing only 15kg, its practical design makes it the ideal companion for outdoor adventurers. Features Cell efficiency of over 22 Monocrystalline solar cells with ETFE protection Layers of flexible eva and durable fiberglass Waterproof to ip67 protects against dirt, dust and water With versatile compatible solar connector terminals Suitable for EcoFlow Delta Powerstations and compatible third-party generators Stable and reliable power supply With a compact, foldable design and a shoulder strap, you can easily carry the solar module to your campsite or store it in your RV while you're on the road. The case, to protect the module when not in use, quickly and easily converts into a convenient stand to find just the right angle to capture the sun's rays. Connect the module to any EcoFlow Delta power station for efficient charging. It also connects to third-party generators thanks to the universal solar connectors. Technical features Module voltage (Vmp): 41V Max. Current (Imp): 9.8A Open circuit voltage (Voc): 48V Short circuit current (Isc): 11A Cell efficiency: 22,4% Dimensions closed: 1068 x 620 x 24 mm Dimensions opened: 1068 x 2390 x 24 mm Weight module: 15 kg (with bag and mounting 21 kg) Scope of delivery: 1x EcoFlow 400w foldable solar module 1x solar cable MC4 to XT-60 1x bag with mounting bracket 1x user manual

The pv350 solar panel from Bluetti is a foldable and portable 350w solar panel and the perfect complement to the Bluetti power stations The weight of only 13.9kg and the practical design make it the ideal companion for outdoor adventurers. Wide range of applications: excellent for use in camping, expeditions or climbing tours for vehicles and boats without fixed solar installation ... and numerous other applications in a wide variety of areas Technical data of the Bluetti pv350 solar module Rated power: 350wp Number of sides: 4 x 87.5Wp Module voltage (Vmp): 37.5V Max. Charge current (Imp): 9.2A Open circuit voltage (Voc): 46.5V Short circuit current (Isc): 10.8A Dimensions closed: 905 x 613 x 65 mm Dimensions open designed: 2400 x 905 mm Ambient temperature: -10°C - +65°C Cell efficiency: 23.4% MC-4 connector with 2.7m cable length Weight: 13.9 kg ETFE coating Scope of delivery 1x Bluetti pv350 solar panel 1x user manual

The EcoFlow 220w solar bag (mpn EFSOLAR220w) is the perfect complement to the EcoFlow River and Delta powerstations. Featuring a bifacial design with a primary 220w side and a 155w back side for ambient light, you can capture up to 25% more solar energy and charge your portable powerstation even faster. Weighing only 9.5kg, its practical design makes it the ideal companion for outdoor adventurers. Features Cell efficiency of 22-23% Monocrystalline solar cells Bifacial - equipped with solar cells on both sides Waterproof to ip67 protects against dirt, dust and water With versatile compatible solar connector terminals Suitable for EcoFlow River / Delta Powerstations and compatible third party generators Stable and reliable power supply With the compact and foldable design, you can easily carry the solar module to your campsite or store it in your RV while you are on the road. The case, to protect the module when not in use, quickly and easily converts into a convenient stand to find just the right angle to catch the sun's rays. Connect the module to an EcoFlow River (eu / Max / Pro) or Delta eu power station to charge it efficiently. Thanks to the universal solar connectors, it is also possible to connect to third-party generators. The bifacial design with a 220w primary side and a 155w rear side allows the sun's rays to be absorbed by both sides of the solar panel, capturing up to 25% more solar energy. With a mirrored surface, you can even collect up to 80% more energy. It's 10% smaller than comparable 220w modules and saves space with thinner tempered glass and less area required for the same capture. Technical Features Rated power: 220w (front) / 144w (rear) Module voltage (Vmp): 18.4V Max. Current (Imp): 12a (front) / 8.4a (rear) Open circuit voltage (Voc): 21.08V Short circuit current (Isc): 13a (front); 8.8a (rear) Cell efficiency: 22-23 Operating temperature range: -20 - +85°C Dimensions closed: 820 x 500 x 32 mm Dimensions opened: 820 x 1830 x 25 mm Module weight: 9,5kg Scope of delivery: 1x EcoFlow 220w foldable solar Panel 1x solar cable MC4 to XT-60 1x bag with mounting bracket 1x user manual

The EcoFlow 160w Solar Bag (mpn 50033001) is the perfect complement to the EcoFlow River and Delta Powerstations. With an output of 160w and an efficiency of over 21%, the solar bag provides excellent performance, even in cold and cloudy environments.... Weighing only 7kg and with a practical design, it is the ideal companion for outdoor adventurers. Features Cell efficiency of over 21% Monocrystalline solar cells with ETFE protection Layers of flexible eva and durable fiberglass Waterproof to ip67 protects against dirt, dust and water With versatile compatible solar connector terminals Suitable for EcoFlow River / Delta power stations and compatible third-party generators Stable and reliable power supply With a compact, foldable design and a shoulder strap, you can easily carry the solar module to your campsite or store it in your RV while you're on the road. The case, to protect the module when not in use, quickly and easily converts into a convenient stand to find just the right angle to capture the sun's rays. Connect the module to any EcoFlow River or Delta power station for efficient charging. It also connects to third-party generators thanks to the universal solar connectors. Technical features Module voltage (Vmp): 18.2V Max. Current (Imp): 8.8A Open circuit voltage (Voc): 21.4V Short circuit current (Isc): 9.6A Cell efficiency: 21-22% Operating temperature range: -20 - +85°C Dimensions closed: 680 x 420 x 24 mm Dimensions opened: 680 x 1585 x 24 mm Weight module: 5 kg (with bag and mounting 7 kg) Scope of delivery: 1x EcoFlow 160w foldable solar module 1x solar cable MC4 to XT-60 1x bag with mounting bracket 1x user manual

The pv200 solar panel from Bluetti is a foldable and portable 200w solar panel and the perfect complement to the Bluetti power stations The weight of only 7.3kg and the practical design make it the ideal companion for outdoor adventurers. Wide range of uses: excellent for use in camping, expeditions or climbing tours for vehicles and boats without fixed solar installation ... and numerous other applications in a wide variety of areas Technical data of the Bluetti pv200 solar module Rated power: 200wp Number of sides: 4 x 50wp Module voltage (Vmp): 20.5V Max. Charge current (Imp): 9.7A Open circuit voltage (Voc): 26.1V Short circuit current (Isc): 10.3A Dimensions closed: 590 x 600 mm Dimensions open designed: 590 x 2265 mm Ambient temperature: -10°C - +65°C Cell efficiency: 23.4% Weight: 7,3kg ETFE coating Scope of delivery 1x Bluetti pv200 solar panel 1x user manual

The EcoFlow 110w solar bag (mpn 50022004) is the perfect complement to the EcoFlow River and Delta Powerstations. With a 110w output and over 21% efficiency, the solar bag provides excellent performance, even in cold and cloudy environments.... Weighing only 6kg and with a practical design, it is the ideal companion for outdoor adventurers. Features Cell efficiency of over 21% Monocrystalline solar cells with ETFE protection Layers of flexible eva and durable fiberglass Waterproof to ip67 protects against dirt, dust and water With versatile compatible solar connector terminals Suitable for EcoFlow River / Delta power stations and compatible third-party generators Stable and reliable power supply With a compact, foldable design and a shoulder strap, you can easily carry the solar module to your campsite or store it in your RV while you're on the road. The case, to protect the module when not in use, quickly and easily converts into a convenient stand to find just the right angle to capture the sun's rays. Connect the module to an EcoFlow River (eu / Max / Pro) or Delta eu power station to charge it efficiently. Thanks to the universal solar connectors, it is also possible to connect to third-party generators. Technical features Module voltage (Vmp): 18.5V Max. Current (Imp): 6A Open circuit voltage (Voc): 21.7V Short circuit current (Isc): 6.3A Cell efficiency: 21-22% Operating temperature range: -20 - +85°C Dimensions closed: 420 x 514 x 24 mm Dimensions opened: 1580 x 514 x 24 mm Weight module: 4 kg (with bag and mounting 6 kg) Scope of delivery: 1x EcoFlow 110w foldable solar module 1x solar cable MC4 to XT-60 1x bag with mounting bracket 1x user manual

The 200w solar bag from Offgridtec (mpn 013110) is a portable solar module and suitable for those who value flexibility. The module is foldable, lightweight and space-saving, making it suitable for many applications. It can be placed horizontally or with the help of the integrated supports at a 45° angle to ensure the best possible solar yield. Due to the integrated usb-connectors in the handle, you can charge even without charge controller and battery, small consumers. The Offgridtec solar bag is therefore the ideal companion for the spontaneous camping trip and the perfect addition to your outdoor equipment. Features Rated power: 200w High efficiency of 22.3% 2x usb 5v 2a connectors for direct charging Robust and water repellent fabric 5 meter connection cable with Anderson Powerpole connector 1.5 meter battery connection cable with 10a fuse Stand feet with ring eyelets Always ready for use You will achieve the greatest benefit with the solar bag in combination with a charge controller and a battery to store the generated energy. But also solo the foldable module is always ready for use. Through the two usb 5v connections you can charge your cell phone or other small consumers via usb directly at the module. The connections are located directly in the handle of the module, so it is ideal for the spontaneous camping trip. High quality workmanship The 200w solar bag from Offgridtec is both robust and space-saving, giving you a high degree of flexibility. The durable and water-resistant polyamide fabric makes the solar bag the ideal companion for camping trips. As with all Offgridtec solar modules, the solar bag is designed with high quality and durability in mind. We produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver top technical performance even under the most adverse conditions. Flexible Alignability The Offgridtec solar pocket can be aligned to match the position of the sun at any time to generate optimal yields throughout the day. Thanks to the integrated supports, the module is positioned at a 45° angle and can thus capture the last rays of the sun even in spring and autumn, when conventional solar panels produce only low currents due to flat sun angles. Due to its light weight and integrated handles, the bag is easy to transport and ready for use at any time. Technical data Rated power: 200w Module voltage (Vmp): 20V Max. Charge current (Imp): 10a Open circuit voltage (Voc): 24V Short circuit current (Isc): 10.8A Cell efficiency: 22.3% Tolerance: ±3% Temperature coefficient: -0.38%/°C Dimensions closed: 605 x 535 x 45 mm Dimensions opened: 2250 x 535 x 22.5 mm Weight 7.5 kg incl. carrying bag Connection Kit included Scope of delivery: 1x Offgridtec solar bag 200w 1x 5 meter connection cable with Anderson Powerpole plug 1x 1,5m battery connection cable with 10a fuse

The fsp-2 180w ultra kit 12v is a combination of the foldable 180w fsp-2 solar panel and a smart latest generation mppt controller. The fsp-2 180w is one of the newest models in the family and also one of the most powerful foldable solar modules currently available. It has a 4-sided design and comes with a matching connection kit that allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged. In terms of charging technology, we rely on the fsp-2 180w kit mppt on the high-quality Victron Smart-Solar 75/15 charge controller. A high quality device which can be conveniently controlled via Bluetooth and a free app and is also equipped with a 15a load output for dc consumers. The connection kit is housed in a lockable bag, directly on the module. So you always have a ready-to-use, small power plant at your side. Performance that sets standards The fsp-2 180w Ultra is equipped with American SPR back-contact cells from a well-known American manufacturer. The cells are completely black, which gives the fsp-2 180w a very modern, high-quality look. The SPR cells ensure a very high efficiency of the panel and, in combination with the low weight and compact dimensions of the fsp-2 panel, set new standards in this power class. Extensive range of applications: excellent usable in the camping area or for expeditions, climbing tours and much more... for vehicles and boats without fixed solar installation ... and numerous other applications in different areas... Technical Highlights fsp 2 180w Ultra Foldable Solar Panel Rated power: 180wp, number of sides: 4 x 45 Wp Dimensions closed: 560 x 440 x 30 mm, open designed: 560 x 1970 x 6 mm Lightweight: only 5.4 kg weight incl. mppt charge controller 75/15 15a and Bluetooth for configuration via free app 15a load output for dc 12v power consumers equipped with high-end solar cells, made in USA Module voltage (Vmp): 39.6 v, max. charge current (Imp): 4.55 A Open circuit voltage (Voc): 46.6 v, short circuit current (Isc): 4.81 A 6.0m 5mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side 0,5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) 1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse Including Victron SmartSolar 75/15 charge controller The Smartsolar 75/15 from Victron Energy (mpn scc075015060r) is a mppt solar charge controller with 15a max charge current for charging 12v and 24v batteries. Unlike the BlueSolar 75/15, the Smart version has built-in Bluetooth, eliminating the need to purchase a Bluetooth dongle. In addition, a VE.Direct connection is still available for communication with other Victron devices such as the Color Control gx or the mppt Control. The integrated Bluetooth in the SmartSolar series is the wireless solution for setting up, monitoring and updating the controller using Apple and Android smartphones, tablets or other devices. The most important technical data at a glance 15a load output High peak efficiency of 98 Freely programmable battery charging algorithm (via the free Victron Connect app) Light dimming functions programmable (via the free Victron Connect app) Ultra fast maximum power point tracking Max. PV open circuit voltage: 75V Charging algorithm: multi-stage, adaptive Integrated Bluetooth module Dimensions: 100 x 113 x 40 mm Weight: 0,5 kg The included Profi-Connection Kit The included connection kit provides everything needed to get the mobile solar set up and running quickly. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller. For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal alligator clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse. Customizable on request All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred. about the fsp-2 series As with all Offgridtec solar module series, great emphasis has been placed on high quality and durability in the fsp series. The fsp 2 180w Ultra uses back-contacted solar cells like those used in our SP high performance series. These cells generate efficiencies of over 24% and are the best currently available on the market. In addition, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions. Scope of delivery 1x Offgridtec FSP-2 180W 12V, 3-01-010760 1x Victron Energy scc075015060r Smartsolar mppt 75/15 15a 12v 24v solar charge controller 1x 6m 2x6mm² module Connection cable with Anderson SB50 connector 1x Ofgridtec FSP-2 Connection-Kit

The fsp-2 180w is one of the newest models in the fsp-2 family and is also one of the most powerful foldable solar modules in the range. It has a 4-sided design and comes with a matching connection kit, which allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged. The fsp-2 180w can be ordered in three variants. Offgridtec is also happy to customize any fsp module in terms of cable set and charging technology on request. The connection kit is stored in a lockable bag, directly on the module. So you always have a ready to use small power plant at your side. Performance that sets standards The fsp-2 180w Ultra is equipped with American spr back-contact cells from a well-known manufacturer. The cells are completely black, which gives the fsp-2 180w a very modern, high-quality look. The spr cells provide a very high efficiency of the panel and set in conjunction with the low weight and compact dimensions of the fsp-2 panel new standards in this power class. extensive range of applications: excellent usable in the camping area or for expeditions, climbing tours and much more... for vehicles and boats without fixed solar installation ... and numerous other applications in different areas... technical highlights fsp 2 180w ultra foldable solar panel Rated power: 180wp Number of sides: 4 x 45 Wp Module voltage (Vmp): 39,6 V Max. Charge current (Imp): 4,55 A Open circuit voltage (Voc): 46,6 V Short circuit current (Isc): 4,81 A Dimensions closed: 560 x 440 x 30 mm Dimensions open designed: 560 x 1970 x 6 mm Weight: 5,4 kg ETFE coating SunPower high performance cells 6.0m 5mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side 0.5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) 1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on battery side Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse the included Profi-Connection Kit The connection kit included in the scope of delivery offers everything needed for a quick start-up of the mobile solar set. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller. For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal crocodile clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse. customizable on request All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred. about the fsp-2 series As with all Offgridtec solar module series, great emphasis has been placed on high quality and durability in the fsp series. The fsp 2 180w Ultra uses back-contacted solar cells like those used in our SP high performance series. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, the complete fsp-2 series is provided with an ETFE coating, which ensures better protection and at the same time guarantees a very high light transmission. Furthermore, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions. Scope of delivery 1x Offgridtec FSP-2 180W 12V, 3-01-010760 1x 6m 2x6mm² module Connection with Anderson SB50 connector 1x FSP-2 Connection Kit

Das tragbare und faltbare Solarpanel von Zendure mit 400W Nennleistung (MPN ZD400SP) ist speziell für den Einsatz im Freien und unterwegs konzipiert. Es bietet eine hohe Leistungsfähigkeit, Robustheit und Vielseitigkeit. Hohe Umwandlungsrate und hoher Wirkungsgrad: Dank modernster Technologie ist das Zendure Solarmodul in der Lage, eine besonders hohe Menge an Sonnenlicht einzufangen. Es nutzt dazu monokristalline Silizium-Solarzellen der neuesten Generation, die einen Umwandlungswirkungsgrad von bis zu 22,5% erreichen. Im Vergleich zu ähnlichen polykristallinen Solarmodulen erzielt das Zendure Modul auch bei schlechten Lichtverhältnissen eine deutlich höhere Effizienz. Viele Einsatzmöglichkeiten: hervorragend einsetzbar im Camping Bereich oder bei Expeditionen, Kletter-Touren uvm... für Fahrzeuge und Boote ohne feste Solarinstallation ... und zahlreichen anderen Anwendungen in unterschiedlichsten Bereichen Perfekter Begleiter für den Campingausflug Das Solarmodul ist nicht nur leicht und tragbar, sondern auch so konzipiert, dass es den Elementen und Gefahren des Reisens standhält. Mit einem Gewicht von nur knapp 13kg und der Faltbarkeit ist das Zendure 400W Solarmodul ein robuster und zuverlässiger Begleiter für Outdoor-Aktivitäten wie Camping und Wandern. Das Solarmodul ist dank seines nahtlosen und einteiligen Designs sowie seiner Schutzart IP67 staub- und wasserdicht und kann selbst extremen Witterungsbedingungen standhalten. Die verstellbare Halterung des Solarmoduls ermöglicht es, es in jeder Richtung und Ausrichtung zu positionieren, um den idealen Winkel für maximale Energieausbeute zu erreichen. Technische Daten Nennleistung: 400Wp Anzahl Seiten: 4x 100Wp Modulspannung (Vmp): 40 V ±5% Max. Strom (Imp): 10 A ±5% Leerlaufspannung (Voc): 49,4 V ±5% Kurzschlussstrom (Isc): 10,36 A ±5% Anschlussstecker: MC4 Schutzart: IP65 Betriebs- und Lagertemperatur: -10°C - +65°C Abmessungen geschlossen: 547 x 1000 x 57 mm Abmessungen offen ausgelegt: 1000 x 2240 x 25 mm Gewicht: 13,2kg Lieferumfang: 1x Zendure 400W Solarpanel 1x Transporttasche 1x Bedienungsanleitung

Das Zendure 200W Solarpanel (MPN ZD200SP) ist ein tragbares und faltbares Solarpanel, das speziell für den Einsatz im Freien und unterwegs entwickelt wurde. Es zeichnet sich durch seine hohe Leistungsfähigkeit, Robustheit und Vielseitigkeit aus. Hohe Umwandlungsrate und hoher Wirkungsgrad: Das Zendure Solarmodul setzt modernste Technologie ein, um eine möglichst hohe Menge an Sonnenlicht einzufangen. Durch die Verwendung von monokristallinen Silizium-Solarzellen der neuesten Generation wird ein Umwandlungswirkungsgrad erzielt, der bis zu 22,5% besser ist als bei vergleichbaren polykristallinen Solarmodulen, auch bei schlechten Lichtverhältnissen. Viele Einsatzmöglichkeiten: hervorragend einsetzbar im Camping Bereich oder bei Expeditionen, Kletter-Touren uvm... für Fahrzeuge und Boote ohne feste Solarinstallation ... und zahlreiche weitere Anwendungen in unterschiedlichsten Bereichen Perfekter Begleiter für den Campingausflug Das Solarmodul ist nicht nur leicht und tragbar, sondern auch so konzipiert, dass es den Elementen und Gefahren des Reisens standhält. Mit einem Gewicht von nur 9,1 kg und der Faltbarkeit ist das Zendure 200W Solarmodul ein robuster und zuverlässiger Begleiter für Outdoor-Aktivitäten wie Camping und Wandern. Das Solarmodul ist dank seines nahtlosen und einteiligen Designs sowie seiner Schutzart IP67 staub- und wasserdicht und kann selbst extremen Witterungsbedingungen standhalten. Die verstellbare Halterung des Solarmoduls ermöglicht es, es in jeder Richtung und Ausrichtung zu positionieren, um den idealen Winkel für maximale Energieausbeute zu erreichen. Mit der mitgelieferten Tragetasche ist das Modul einfach und sicher zu transportieren. Technische Daten Nennleistung: 200Wp Anzahl Seiten: 4x 50Wp Modulspannung (Vmp): 18V max. Strom (Imp): 11A Leerlaufspannung (Voc): 25V Kurzschlussstrom (Isc): 12A Betriebstemperatur: -20°C ~ 60°C Anschlussstecker: MC4 Schutzart: IP67 Abmessungen geschlossen: 615 x 560 x 55 mm Abmessungen offen ausgelegt: 560 x 2310 x 15 mm Gewicht: 9,1 Kg Lieferumfang: 1x Zendure 200W Solarpanel 1x Transporttasche 1x Bedienungsanleitung

The fsp 2 135w Ultra is a foldable high-end solar panel with integrated charge controller, battery terminals as well as 3 integrated fold-out supports with the help of which you can set up the fsp 2 panel easily and anywhere at a 45 degree angle. The fsp 2 Ultra is the successor of our mp-105w and is equipped with the latest spr back-contact cells and delivers a whopping 135w of solar power in optimal orientation and sunshine. Together with the very compact dimensions when folded and the low overall weight, the fsp 2 sets new standards in terms of flexibility and efficiency among mobile, foldable solar modules. The price of the new Offgridtec fsp 2 Ultra also sets standards among comparable panels and stands up to any comparison. The basic solution for solar-powered, mobile charging of batteries up to max. 200Ah: in the camping area for expeditions for vehicles and boats without fixed solar installation and numerous other applications in different areas overview power management fsp 2 135w Ultra Supported battery types (12v): agm, lead acid, gel usb output: 1a 5v directly to the charge controller 12v consumer output: 10a 12v directly on charge controller Technical data foldable solar panel fsp 2 135w Ultra Module voltage (Vmp): 19,8V Max. Charging current (Imp): 6,82A Open circuit voltage (Voc): 23,3V Short circuit current (Isc): 7,22A Charge controller: Offgridtec pwm Pro 12/24-10 Supported battery types(12v): agm, lead acid, gel 2 usb outputs: 5v max 2,4A directly on charge controller 12v consumer output: 10a 12v directly on charge controller Dimensions closed: 560 x 440 x 20 mm Dimensions open designed: 560 x 1545 x 6 mm Weight: 4,8 kg Cable length module to controller: 6,5m Cable length controller to battery: 1m Battery connection: alligator clips Rated power: 120WP Technical note: The charge controller is positively grounded - this may cause problems when connecting to a system where the ground is grounded to negative easy to set up thanks to 3 firmly integrated feet Three feet are sewn to the pocket of the fsp, which can be easily folded out to place the panel on the ground at an angle of 45 degrees. Thus, the module is fully assembled and ready for use within one minute. Offgridtec pwm Pro charge controller 10a The Offgridtec pwm 12/24-10 (mpn 1-01-010910) is a microprocessor controlled solar charge controller with 10a max charge power and can charge both 12v and 24v batteries. It uses advanced 3-stage pwm modulation to get the most out of your agm, gel or lead acid batteries. It is suitable for Solarasystems of 130w at 12v and 260w at 24v battery voltage. Features pwm pro charge controller 10a max. charge current 10a, for up to 130w PV power at 12v and 260w at 24v systems modern, 3-stage pwm charge control for gentle and efficient charging of your battery(ies) 3 battery types adjustable, agm, gel and liquid lead acid intuitive operation via 2 buttons directly on the device large LCD display with numerous display options, incl. kWh meter 2 usb-ports with a maximum output power of 2.4A Load output with numerous configuration options, e.g. for light control Temperature compensated battery charging (optional temperature sensor required, not included) customizable on request All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred. about the fsp series As with all Offgridtec solar module series, the fsp-2 series is designed with high quality in mind. The fsp-2 120 uses back-contacted solar cells like those used in our SP high-performance series. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions. Lieferumfang: 1x Offgridtec FSP-2 135W 12V 1x Offgridtec PWM Pro Laderegler 12V/24V 10A USB-Port 1x 6m 2x6mm² modul Connection calbe with Anderson SB50 connector 1x Ofgridtec FSP-2 Connection-Kit