Cable Accessories
Filter
–
Cable Accessories
6 Results
Sorting
VAT-exempt delivery possible*
2H-FURD-397Z
MC4 Connector Pair - plug and socket 4-6mm²
This set includes a male and a female MC4-plug. These plugs are original Stäubli MC4-plugs.
Details:
touchproof, unplugged IP2X
protection, plugged IP67
temperature range from -40° to 90°C
isolation material: PA
snap-in locking-system
cable strain relief according to IEC 61984 (06.2001)
contact system: MC-contact lamellas
contact material: tinned copper
flame class:UL94-V0
protection class: II
system voltage up to 1000V
rated amperage up to 30A
This set includes a male and a female MC4-plug. These plugs are original Stäubli MC4-plugs.
Details:
touchproof, unplugged IP2X
protection, ...
Shipped in 1-3 days
Shipped in 1-3 days
2H-FURD-397Z
MC4 Connector Pair - plug and socket 4-6mm²
VAT-exempt delivery possible*
This set includes a male and a female MC4-plug. These plugs are original Stäubli MC4-plugs.
Details:
touchproof, unplugged IP2X
protection, plugged IP67
temperature range from -40° to 90°C
isolation material: PA
snap-in locking-system
cable strain relief according to IEC 61984 (06.2001)
contact system: MC-contact lamellas
contact material: tinned copper
flame class:UL94-V0
protection class: II
system voltage up to 1000V
rated amperage up to 30A
Shipped in 1-3 days
VAT-exempt delivery possible*
000-000-002
Offgridtec Branch Plug Y-Connector Pair
These branch plugs are used to connect solar modules parallely to maintain a constant voltage. Ideal for 12V-systems or the connection of thin-film modules.
Details:
1 Pair Y-connectors for a parallel connection of solar modules
easy snap-in connection system
for cables with a max. diameter of 4 - 6mm²
ideal for 12V-systems and thin-film modules
suitable for voltages up to max. 1000V DC
snap-in connection system
IP67
compatible with solar connector plugs
Scope of Delivery:
1x Offgridtec branch plugs Y-Connectors (pair)
These branch plugs are used to connect solar modules parallely to maintain a constant voltage. Ideal for 12V-systems or the connection of thin-film mo...
Shipped in 1-3 days
Shipped in 1-3 days
000-000-002
Offgridtec Branch Plug Y-Connector Pair
VAT-exempt delivery possible*
These branch plugs are used to connect solar modules parallely to maintain a constant voltage. Ideal for 12V-systems or the connection of thin-film modules.
Details:
1 Pair Y-connectors for a parallel connection of solar modules
easy snap-in connection system
for cables with a max. diameter of 4 - 6mm²
ideal for 12V-systems and thin-film modules
suitable for voltages up to max. 1000V DC
snap-in connection system
IP67
compatible with solar connector plugs
Scope of Delivery:
1x Offgridtec branch plugs Y-Connectors (pair)
Shipped in 1-3 days
8-67-009225
Victron Stainless Steel Installation Socket 32A Shore Power Caravan Boat Yacht
The 32A Victron shore power socket (SHP303202000) was designed especially for caravans and boats. This model comes with a high-quality stainless steel blind and is compatible with Victron shore power cables.
Technical Data:
Protection: IP57
Blind: stainless steel
Weight: 0,65kg
Max. voltage: 250V AC
Max. amperage: 32A
Standard: IEC 60309, 2p+E
Blind type: PA6
Suitable for:
Victron Shore-power cable 15m 16A
Victron Shore-power cable 25m 16A
Victron Shore-power cable 15m 25A
Victron Shore-power cable 25m 32A
Delivery scope:1x Victron Shore Power Socket (SHP303202000) Stainless Steel 32A
The 32A Victron shore power socket (SHP303202000) was designed especially for caravans and boats. This model comes with a high-quality stainle...
Shipped in 1-3 days
Shipped in 1-3 days
The 32A Victron shore power socket (SHP303202000) was designed especially for caravans and boats. This model comes with a high-quality stainless steel blind and is compatible with Victron shore power cables.
Technical Data:
Protection: IP57
Blind: stainless steel
Weight: 0,65kg
Max. voltage: 250V AC
Max. amperage: 32A
Standard: IEC 60309, 2p+E
Blind type: PA6
Suitable for:
Victron Shore-power cable 15m 16A
Victron Shore-power cable 25m 16A
Victron Shore-power cable 15m 25A
Victron Shore-power cable 25m 32A
Delivery scope:1x Victron Shore Power Socket (SHP303202000) Stainless Steel 32A
Shipped in 1-3 days
8-67-013390
Victron Coupling socket 16a/230v (2p/3w) for panel mounting plug
The mp16-110 demountable coupler receptacle from Victron Energy (mpn shp301604000) is to be used with the mp16-10 panel mount receptacle. The cable size to be used depends on the current. Features Connections: 2p + A Voltage: 230V Max. Current: 16a / 230V Housing: pa 6 Connector pins / terminals: Brass, nickel plated Recommended cable cross section: 1.5mm² - 2.5mm² Safety instructions and measures The electrical installation must be switched off during installation Install the shore connection according to the installation instructions Use cables with the appropriate cross sections Connections and safety precautions must be carried out according to local regulations Installation instructions Use the following procedure to attach the connector to the cable: Unscrew the connector and slide the housing onto the cable. The grommet can be cut to size in the process. Insulate the cable a. Make sure the cable ends are clean and not corroded. If necessary, cut back the cable until clean wire is visible. Do not solder the ends of the cables! Insert the cables into the correct color-coded terminal openings on the back of the inlet. Tighten the terminal screws to a torque. Make sure there is no cable insulation under a terminal. Tighten the strain relief. Slide the housing over the connector. Apply a small amount of soap to the cable, if necessary, to make the plastic protector easy to slide. Tighten the mounting screws securely. Scope of delivery: 1x Victron Coupling socket 16a (shp301604000)
The mp16-110 demountable coupler receptacle from Victron Energy (mpn shp301604000) is to be used with the mp16-10 panel mount receptacle. The cable si...
Shipped in 2-5 days
Shipped in 2-5 days
The mp16-110 demountable coupler receptacle from Victron Energy (mpn shp301604000) is to be used with the mp16-10 panel mount receptacle. The cable size to be used depends on the current. Features Connections: 2p + A Voltage: 230V Max. Current: 16a / 230V Housing: pa 6 Connector pins / terminals: Brass, nickel plated Recommended cable cross section: 1.5mm² - 2.5mm² Safety instructions and measures The electrical installation must be switched off during installation Install the shore connection according to the installation instructions Use cables with the appropriate cross sections Connections and safety precautions must be carried out according to local regulations Installation instructions Use the following procedure to attach the connector to the cable: Unscrew the connector and slide the housing onto the cable. The grommet can be cut to size in the process. Insulate the cable a. Make sure the cable ends are clean and not corroded. If necessary, cut back the cable until clean wire is visible. Do not solder the ends of the cables! Insert the cables into the correct color-coded terminal openings on the back of the inlet. Tighten the terminal screws to a torque. Make sure there is no cable insulation under a terminal. Tighten the strain relief. Slide the housing over the connector. Apply a small amount of soap to the cable, if necessary, to make the plastic protector easy to slide. Tighten the mounting screws securely. Scope of delivery: 1x Victron Coupling socket 16a (shp301604000)
Shipped in 2-5 days
8-67-009220
Victron Stainless Steel Installation Socket Caravan Boat Yacht
The 16A Victron shore power socket (SHP301602000R) was designed especially for caravans and boats. This model comes with a high-quality stainless steel blind and is compatible with Victron shore power cables.
Technical Data:
Protection: IP57
Blind: stainless steel
Weight: 0,34kg
Max. voltage: 250V AC
Max. amperage: 16A
Standard: IEC 60309, 2p+E
Blind type: PA6
Suitable for:
Victron Shore-power cable 15m 16A
Victron Shore-power cable 25m 16A
Delivery scope:1x Victron Shore Power Socket (SHP301602000R) Stainless Steel
The 16A Victron shore power socket (SHP301602000R) was designed especially for caravans and boats. This model comes with a high-quality stainless stee...
Shipped in 1-3 days
Shipped in 1-3 days
The 16A Victron shore power socket (SHP301602000R) was designed especially for caravans and boats. This model comes with a high-quality stainless steel blind and is compatible with Victron shore power cables.
Technical Data:
Protection: IP57
Blind: stainless steel
Weight: 0,34kg
Max. voltage: 250V AC
Max. amperage: 16A
Standard: IEC 60309, 2p+E
Blind type: PA6
Suitable for:
Victron Shore-power cable 15m 16A
Victron Shore-power cable 25m 16A
Delivery scope:1x Victron Shore Power Socket (SHP301602000R) Stainless Steel
Shipped in 1-3 days
8-67-013395
Victron Coupling socket 32a/230v (2p/3w) for built-in appliance plug
The detachable coupling socket mp32-110 from Victron Energy (mpn shp303204000) is to be used with the mp32-10 built-in appliance plug. The cable size to be used depends on the current. Properties Connections: 2p + A Voltage: 230V Max. Current: 32a / 230V Housing: pa 6 Plug pins / connection terminals: Brass, nickel-plated Recommended cable cross-section: 4mm² Safety regulations and measures The electrical installation must be switched off during installation Install the shore connection in accordance with the installation instructions Use cables with the appropriate cross-sections Connections and safety precautions must be carried out in accordance with local regulations Installation instructions Proceed as follows to attach the plug to the cable: Unscrew the plug and slide the housing onto the cable. The grommet can be cut to size. Insulate the cable a. Make sure that the cable ends are clean and not corroded. If necessary, cut the cable back until clean wire is visible. Do not solder the ends of the cables! Insert the cables into the correct color-coded terminal openings on the back of the inlet. Tighten the terminal screws to a torque. Make sure that there is no cable insulation under a terminal. Tighten the strain relief. Slide the housing over the plug. If necessary, apply a small amount of soap to the cable so that the plastic protection is easy to slide. Tighten the mounting screws firmly. Scope of delivery: 1x Victron coupling socket 32a (shp303204000)
The detachable coupling socket mp32-110 from Victron Energy (mpn shp303204000) is to be used with the mp32-10 built-in appliance plug. The cable size ...
Shipped in 1-3 days
Shipped in 1-3 days
The detachable coupling socket mp32-110 from Victron Energy (mpn shp303204000) is to be used with the mp32-10 built-in appliance plug. The cable size to be used depends on the current. Properties Connections: 2p + A Voltage: 230V Max. Current: 32a / 230V Housing: pa 6 Plug pins / connection terminals: Brass, nickel-plated Recommended cable cross-section: 4mm² Safety regulations and measures The electrical installation must be switched off during installation Install the shore connection in accordance with the installation instructions Use cables with the appropriate cross-sections Connections and safety precautions must be carried out in accordance with local regulations Installation instructions Proceed as follows to attach the plug to the cable: Unscrew the plug and slide the housing onto the cable. The grommet can be cut to size. Insulate the cable a. Make sure that the cable ends are clean and not corroded. If necessary, cut the cable back until clean wire is visible. Do not solder the ends of the cables! Insert the cables into the correct color-coded terminal openings on the back of the inlet. Tighten the terminal screws to a torque. Make sure that there is no cable insulation under a terminal. Tighten the strain relief. Slide the housing over the plug. If necessary, apply a small amount of soap to the cable so that the plastic protection is easy to slide. Tighten the mounting screws firmly. Scope of delivery: 1x Victron coupling socket 32a (shp303204000)
Shipped in 1-3 days
Cable Accessories
Tools and equipment from well-known brands for various applications and tasks - crimping, bunching, sorting, skinning and much more.
In our Know-how section you find useful manuals and videos about the professional use of these products.