This 2-core cable connects charge controller and solar module in a professional way. It is equipped with MC4-connectors (module) and ferrules (charge controller). Most 12V modules have MC4-plugs - if other plugs are needed you find adaptors in our shop. All components are crimped with professional tools and show excellent connection characteristics. The cable is manufactured in our factory in Lower Bavaria. Solar cable: 4mm cable diameter double-insulated very flexible VDE 0295 class 5 and IEC 60228 restistant against UV, ozone, weather, water, chemicals, oil, fire (according to VDE 0482-332-2, DIN) type of protection (plugged): IP67 temperature range: -40°C to 90°C insulation material: PA connection system: snap-in cable relief according to IEC 61984 contact system: MC4 contact fins contact material: tinned copper flame class: UL94-V0 protection class: II system voltage up to 1000V Ferrules: material: tinned copper length: 12mm

This two-cored solar cable connects charge controller and solar modules within a system in a professional way.On the module side it is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules.Most modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional tools and provide a high connection quality. The cable is manufactured in our factory in Lower Bavaria. Data cable: diameter 4mm double-isolated very flexible VDE 0295 class 5 and IEC 60228 resistant against UV, ozone, weather,water, chemicals, oil fire-resistant according to VDE 0482-332-2, DIN safe from touch protection IP: unplugged - IP2X; plugged - IP67 temperature range: -40° ...60° C isolation material: PA locking-system: snap-in cable strain relief according to IEC 61984 contact system: MC Multilam contact material: tinned copper flame class: UL94-V0 protection class II system voltage up to 1000V Data ferrules: material: tinned copper length: 12mm

This double-core solar cable connects module and charge controller professionally. On the module-side this cable is equipped with original MC4-connectors and ferrules on the controller-side. Most 12V modules come with MC4-connectors. If your module is equipped with other connectors you find fitting adaptors in our shop. All components were crimped with professional tools and provide an excellent connection quality.The cable is manufactured in our factory in Lower Bavaria. Details: Length: 8m MC4-plugs 6mm² diameter double-isolated UV-, ozone-, weather- and water-resistant very flexible

This two-cored solar cable connects charge controller and solar modules within a system in a professional way. On the module side it is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules. Most modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional tools. Details: length: 3m MC4-connectors 6mm conductor diameter double-isolated resistant against: UV, ozone, weather, water very flexible

This two-cored solar cable connects charge controller and solar modules within a system in a professional way. On the module side it is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules. Most 12V-modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional Tools. The cable is manufactured in our factory in Lower Bavaria. Details: length: 1m MC4-connectors 6mm² conductor diameter double-isolated resistant against: UV, ozone, weather, water very flexible

This two-cored solar cable connects charge controller and solar modules within a system in a professional way. On the module side it is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules. Most modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional tools. The cable is manufactured in our factory in Lower Bavaria. Details: length: 5m MC4-connectors 6mm conductor diameter double-isolated resistant against: UV, ozone, weather, water very flexible

This double-core solar cable connects module and charge controller professionally. On the module-side this cable is equipped with original MC4-connectors and ferrules on the controller-side. Most 12V modules come with MC4-connectors. If your module is equipped with other connectors you find fitting adaptors in our shop. All components were crimped with professional tools and provide an excellent connection quality. Because of it's diameter of 4mm² this cable is suitable only for 24V-systems or above from a lenght of 5m on. For 12V-systems you better use a 6mm²-cable. The cable is manufactured in our factory in Lower Bavaria. Details: Suitable for 24V-systems Length: 7m MC4-connectors 4mm conductor diameter Double-isolated UV-,ozone, weather- and water-resistant Very flexible MC4 connectors - touchproof, unplugged IP2X - protection, plugged IP67 - temperature range: -40° to 90° C - isolation material PA - snap-in lock-system - cable strain relief according IEC 61984 - contact-system MC-contact lamellars - contact material: tinned copper - flame class UL94-V0 - protection class II - system voltage max. 1000V - material: tinned copper *German Association for Technical Inspection

This double-core solar cable connects module and charge controller professionally. On the module-side this cable is equipped with original MC4-connectors and ferrules on the controller-side. Most 12V modules come with MC4-connectors. If your module is equipped with other connectors you find fitting adaptors in our shop. All components were crimped with professional tools and provide an excellent connection quality. The cable is manufactured in our factory in Lower Bavaria. Because of it's diameter of 4mm² this cable is suitable only for 24V-systems or above from a lenght of 5m on. For 12V-systems you better use a 6mm²-cable. Details: Suitable for 24V-systems Length: 10m MC4-connectors 4mm conductor diameter Double-isolated UV-,ozone, weather- and water-resistant Very flexible MC4 connectors - touchproof, unplugged IP2X - protection, plugged IP67 - temperature range: -40° to 90° C - isolation material PA - snap-in lock-system - cable strain relief according IEC 61984 - contact-system MC-contact lamellars - contact material: tinned copper - flame class UL94-V0 - protection class II - system voltage max. 1000V - material: tinned copper

This two-cored solar cable connects charge controller and solar modules within a system in a professional way. On the module side it is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules. Most modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional Tools. The cable is manufactured in our factory in Lower Bavaria. Details: suitable for 12V-systems length: 15m MC4-connectors 6mm conductor diameter double-isolated resistant against: UV, ozone, weather, water very flexible

This 2-core solar cable professionally connects the solar charge controller to the solar modules in a solar system. On the module side the cable has original Multi-Contact mc4 connectors and on the charge controller side the cable ends are cut for easy stripping of the sheath and exposure of the bare wire. The cable can be connected to any charge controller with appropriate receptacle (min 10mm²). Most 12v modules have mc-4 connectors. If your module has other plugs, you can find the appropriate adapters in our store. All components were crimped with professional tools and show an optimal connection quality. The cable is manufactured in our factory in Lower Bavaria. Due to the cross-section, cables with 4mm² from a length of 5m are only suitable for 24v systems and up. For 12v you should use at least 6mm². Features solar cable suitable from 12v system Length: 10m mc-4 connector 10mm² wire cross section double insulated resistant against: uv, ozone, weather, water very flexible Properties mc-4 plug and socket Touch protection, unplugged IP2X Protection class, mated IP67 Temperature application range -40° - +90°C Insulation material PA Locking system snap-in Cable strain relief according to iec 61984 Contact system MC contact lamellae Contact material copper, tin-plated Flame class UL94-V0 Protection class II System voltage up to 1000V Material: copper / tin Scope of delivery: 1x 10m professional connection cable 10mm² solar module to charge controller  

This two-cored solar cable connects charge controller and solar modules within a system in a professional way. On the module side it is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules. Most modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional tools. The cable is manufactured in our factory in Lower Bavaria. Because of its diameter 4mm²-cables from a length of 5m on are only suitable for 24V-systems. For 12V-systems you should use cables with at least 6mm². Details: suitable for 24V-systems or higher length: 15m MC4-connectors 4mm conductor diameter double-isolated resistant against: UV, ozone, weather, water very flexible

This two-cored solar cable connects charge controller and solar modules within a system in a professional way. On the module side it is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules. Most modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional Tools. The cable is manufactured in our factory in Lower Bavaria. Details: suitable for 24V-systems or higher length: 10m MC4-connectors 6mm conductor diameter double-isolated resistant against: UV, ozone, weather, water very flexible

This two-cored solar cable connects charge controller and solar modules within a system in a professional way. On the module side it is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules. Most modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional Tools. The cable is manufactured in our factory in Lower Bavaria. Details: suitable for 12V-systems length: 20m MC4-connectors 6mm conductor diameter double-isolated resistant against: UV, ozone, weather, water very flexible