This two-cored solar cable connects charge controller and solar modules within a system in a professional way. On the module side it is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules. Most modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional tools and provide a high connection quality. For this cable we use either components from Helukabel or EBS-Solar - both German manufacturers. Data cable: diameter 4mm double-isolated very flexible VDE 0295 class 5 and IEC 60228 resistant against UV, ozone, weather,water, chemicals, oil fire-resistant according to VDE 0482-332-2, DIN safe from touch protection IP: unplugged - IP2X; plugged - IP67 temperature range: -40° ...60° C isolation material: PA locking-system: snap-in cable strain relief according to IEC 61984 contact system: MC Multilam contact material: tinned copper flame class: UL94-V0 protection class II system voltage up to 1000V Data ferrules: material: tinned copper length: 12mm

This 2-core cable connects charge controller and solar module in a professional way. It is equipped with MC4-connectors (module) and ferrules (charge controller). Most 12V modules have MC4-plugs - if other plugs are needed you find adaptors in our shop. All components are crimped with professional tools and show excellent connection characteristics. The cables are either made by Helukabel or EBS-Solar, both German manufacturers. Solar cable: 4mm cable diameter double-insulated very flexible VDE 0295 class 5 and IEC 60228 restistant against UV, ozone, weather, water, chemicals, oil, fire (according to VDE 0482-332-2, DIN) type of protection (plugged): IP67 temperature range: -40°C to 90°C insulation material: PA connection system: snap-in cable relief according to IEC 61984 contact system: MC4 contact fins contact material: tinned copper flame class: UL94-V0 protection class: II system voltage up to 1000V Ferrules: material: tinned copper length: 12mm

This 2-core solar cable professionally connects the solar charge controller to the solar modules in a solar system. On the module side the cable has original Multi-Contact mc4 connectors and on the charge controller side the cable ends are cut for easy stripping of the sheath and exposure of the bare wire. The cable can be connected to any charge controller with appropriate receptacle (min 10mm²). Most 12v modules have mc-4 connectors. If your module has other plugs, you can find the appropriate adapters in our store.All components were crimped with professional tools and show an optimal connection quality. The processed solar cable comes from the manufacturer Lapp-Kabel and is a top brand product.Due to the cross-section, cables with 4mm² from a length of 5m are only suitable for 24v systems and up. For 12v you should use at least 6mm².Features solar cablesuitable from 12v systemLength: 10mmc-4 connector10mm² wire cross sectiondouble insulatedresistant against: uv, ozone, weather, watervery flexibleProperties mc-4 plug and socketTouch protection, unplugged IP2XProtection class, mated IP67Temperature application range -40° - +90°CInsulation material PALocking system snap-inCable strain relief according to iec 61984Contact system MC contact lamellaeContact material copper, tin-platedFlame class UL94-V0Protection class IISystem voltage up to 1000VMaterial: copper / tinScope of delivery:1x 10m professional connection cable 10mm² solar module to charge controller

This two-cored solar cable connects charge controller and solar modules within a system in a professional way.Due to its weather resistance it is very well suited for caravans.On the module side this cable is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules.Most 12V-modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional tools and provide a high connection quality. length: 5m 4mm² cable diameter double-isolated resistant against UV, ozone, weather and water very flexible

This double-core solar cable connects charge controller and solar modules within a system in a professional way. Due to its weather resistance it is very well suited for caravans. On the module side this cable is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules. Most 12V-modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional tools and provide a high connection quality. length: 8m 6mm² cable diameter double-isolated resistant against UV, ozone, weather and water very flexible

This two-cored solar cable connects charge controller and solar modules within a system in a professional way.Due to its weather resistance it is very well suited for caravans.On the module side this cable is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules.Most 12V-modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional tools and provide a high connection quality. length: 3m high-quality: components and cable assembly is made in Germany 2x4mm² cable diameter double-isolated resistant against UV, ozone, weather and water very flexible out diameter: 12mm equipped with original MultiContact-plugs

This 2-core solar cable professionally connects the solar charge controller to the solar modules in a solar system. On the module side the cable has original Multi-Contact mc4 connectors and on the charge controller side the cable ends are cut for easy stripping of the sheath and exposure of the bare wire. The cable can be connected to any charge controller with appropriate receptacle (min 10mm²). Most 12v modules have mc-4 connectors. If your module has other plugs, you can find the appropriate adapters in our store.All components were crimped with professional tools and show an optimal connection quality. The processed solar cable comes from the manufacturer Lapp-Kabel and is a top brand product.Due to the cross-section, cables with 4mm² from a length of 5m are only suitable for 24v systems and up. For 12v you should use at least 6mm²Features solar cablesuitable from 12v systemLength: 15mmc-4 connector10mm² wire cross sectiondouble insulatedresistant against: uv, ozone, weather, watervery flexibleProperties mc-4 plug and socketTouch protection, unplugged IP2XProtection class, mated IP67Temperature application range -40° - +90°CInsulation material PALocking system snap-inCable strain relief according to iec 61984Contact system MC contact lamellaeContact material copper, tin-platedFlame class UL94-V0Protection class IISystem voltage up to 1000VMaterial: copper / tinScope of delivery:1x 15m professional connection cable 10mm² solar module to charge controller

This 2-core solar cable professionally connects the solar charge controller to the solar modules in a solar system. On the module side the cable has original Multi-Contact mc4 connectors and on the charge controller side the cable ends are cut for easy stripping of the sheath and exposure of the bare wire. The cable can be connected to any charge controller with appropriate receptacle (min 10mm²). Most 12v modules have mc-4 connectors. If your module has other plugs, you can find the appropriate adapters in our store.All components were crimped with professional tools and show an optimal connection quality. The processed solar cable comes from the manufacturer Lapp-Kabel and is a top brand product.Due to the cross-section, cables with 4mm² from a length of 5m are only suitable for 24v systems and up. For 12v you should use at least 6mm²Features solar cablesuitable from 12v systemLength: 20mmc-4 connector10mm² wire cross sectiondouble insulatedresistant against: uv, ozone, weather, watervery flexibleProperties mc-4 plug and socketTouch protection, unplugged IP2XProtection class, mated IP67Temperature application range -40° - +90°CInsulation material PALocking system snap-inCable strain relief according to iec 61984Contact system MC contact lamellaeContact material copper, tin-platedFlame class UL94-V0Protection class IISystem voltage up to 1000VMaterial: copper / tinScope of delivery:1x 20m professional connection cable 10mm² solar module to charge controller