Jinko Tiger N-Type 60tr 370w solar panel mono mbb perc half cell module tiling ribbon

Jinko Tiger N-type 60tr (mpn jkm370n-6tl3) is a 370w solar module with monocrystalline cells and N-type technology. The solar cells use multi-busbar technology, with this, the loss due to microcracks has been efficiently reduced, the current transmission path has been reduced by 50%, and the cell efficiency has been improved. The module is manufactured with the Tiling Ribbon process and Hot 2.0 technology.

The Jinko Solarmodule is certified for use in wind and snow loads up to 2400 Pa and 5400 Pa, respectively, and for its high salt and ammonia resistance. The tempered front glass with high light transmission and low iron content has a thickness of 3.2mm and anti-reflective coating. The frame has an anodized aluminum alloy.

Features

• 9-busbar solar cell (multi-busbar technology)
• High efficiency of 21.54
• PID Resistance (Excellent anti-PID performance guarantee thanks to optimized mass production processes and material control)
• Hot 2.0 technology
• Positive power tolerance of 0~+3%
• Incl. connection cable
• Manufacturer product warranty: 15 years
• Improved performance in low light
• Improved mechanical resistance to external influences
• Max. Lifetime even under extreme environmental conditions

What is the Tiling Ribbon (tr method)?

The Tiling Ribbon method is a connection method for solar cells. In this method, the cells of the Tiger module are connected to each other like shingles. The connection is made by a flat pressing, in which a connector is incorporated. This gives the individual cells greater elasticity and stability, which can prevent microcracks. The transition from one cell to another through the connector is called a "ribbon".

In Jinko's previous module series, square ribbons were still used. For the Tiger series, round Ribbon was developed, which reduces the loss at the cell transition. The sun's rays are therefore no longer reflected, but hit the solar cell directly.

N-type technology

Compared to P-type products, N-type cells, which are used with a different doping technology, perform better in power loss. The significant increase in bifacial factor and optimization of operating temperature also bring higher power gain. When it comes to the LCOE value (cost of electricity), the analysis result has significantly reduced compared to conventional P-type modules.

hot 2.0 technology

Efficient passivation contact technology is applied in hot 2.0 cells, which updates micro-nano-tunneling through the oxide layer and carrier-selective lamination of microcrystalline silicon thin films on the backside. This advanced structure contributes to better passivation performance and electrical conductivity, increasing cell efficiency and power generation performance. Under the conditions of mass production, the maximum efficiency of N-type hot2.0 cell is over 21%, and has a wide application prospect in the near future.

Technical data

• Power (Pmax): 370wp
• Voltage (Vmp): 34.49V
• Max. Current (Imp): 10.73A
• Open circuit voltage (Voc): 41.46V
• Short circuit current (Isc): 11.43A
• Cell efficiency: 21.25%
• Operating temperature: -40°C - +85°C
• Max. System voltage: 1000V/DC
• Cell type: N-type monocrystalline
• Number of cells: 120 (6 x 20)
• Weight: 19 kg
• Dimensions: 1692 x 1029 x 30 mm
• Protection class junction box: IP68

Scope of delivery:

1x Jinko Tiger N-type 60tr 370w solar panel