With 4 end clamps modules can be mounted on profile rails. Features: material: aluminuium opening for M8 screws frame height of 35mm dimensions: 70 x 30 x 39mm

The bc01 Female from Betteri (mpn bc01B) is used for connection to a Envertech-, Hoymiles- or Huayu inverter. The opposite side can be connected to a h07rn-f rubber hose cable with a diameter of 10-14mm. It is a three-pole socket made of UV-resistant material. In addition, it is dustproof and waterproof according to protection class ip67, making it suitable for indoor and outdoor use. Product features Suitable for 1-phase inverters from e.g. Envertech, Hoymiles or Huayu Suitable for cables with a diameter of 10-14mm Dust and waterproof according to ip67 UV resistant - Suitable for indoor and outdoor installation Technical features Number of poles: 3-pole Material: plastic Operating temperature range: -40°C - +85°C Rated voltage: 230v AC Rated current: 25A Dimensions: 85.5 x 34.8 x 34.8 mm Weight: approx. 50g Scope of delivery: 1x Betteri bc01 female power plug

The end cap of Betterie (mpn bc01c) is used to close the unused 3 pole AC socket of the PV inverter of e.g. Envertech, Hoymiles or Huayu. Product features Suitable for 1-phase inverter from e.g. Envertech, Hoymiles or Huayu Closure of Betteri bc01 Female connector Dust and waterproof according to ip67 UV resistant - Suitable for indoor and outdoor mounting Scope of delivery: 1x Betteri Closure cap for bc01 socket

Dekasyl MS-5 is a polymer-based adhesive with a high degree of adhesion and initial strength which is ideal for elastic connections of various components.Thanks to it's adhesive power the use of clamps is mostly unnecassary. The Dekasyl MS-5 also serves as sealent between similar materials or when mechanical connections are used. Application: Elastic connections and sealing for trains, caravans, trucks, cars,... Glueing windows of buses, trains, caravans,... Glueing of edge profiles (aluminium or polyester) of trailers Glueing of polyester components with metal frame Characteristics: Free of solvents, isocyanate and PVC Very UV- and age-resistant Very high initial strength. Very high adhesion in general even without priming on various surfaces. Constantly elastic within a temperature range of -40°C to +120° Neutral, odorless and quick-setting After skim-development paintable - normally this does not influence the setting-process Compatible with most industrial painting systems, alkyd resin paint as well as dispersion paint (because of the many different types of industrial paints a material compatibility test is recommended) We recommend to mount our spoilers and cable entries only with Dekasyl adhesive together with DEKAvator as this connection had the best outcome in a laboratory test. Why Dekasyl? Manufacturers of caravans like Fendt, Dethleffs, Burstner, Carthago, Pilote and Hymer use Dekalin-products in many different areas, for example as sealent for roofs, side panels, undercoating, glueing of PMMA-windows, sound-proofing, engine-covering, and many more.As a global partner of the caravan and camping industry Dekalin provides you with a wide range of latest technology and supports sellers in realizing their demands. They offer special solutions for sealing, glueing, damming and repairing. Details:Filling: 290mlMPN: 6252212Color: whiteDelivery scope: 1 tube 290ml

Dekaseal 8936 from Dekalin is the classic sealant. The dab-on sealant impresses with high tightness, uv-resistance, as well as elasticity, since it does not harden and remains somewhat permanently tacky. Optimal for use in applications without visible joint edges (flaps, hatches, side windows, keder strips, exterior sockets, etc.). The simple processing convinces professionals and laymen alike. There is no need for additional cleaning work, as protruding rust can be easily removed by dabbing without leaving any residue. The sealant can be used without pretreatment on clean, dry, dust- and grease-free surfaces used in vehicle construction/caravaning. Dekaseal 8936 can be applied by hand or with the aid of a compressed air gun. Its strengths, apart from its high impermeability, are that it is easy to dismantle, i.e. it is well suited for connections that need to be undone at a later date. Applications Sealing of overlaps and joints in e.g. bus, caravan, motor home, train and truck construction Sealing of screw connections Sealing of sun roof systems Application under facing strips for installation of windows and skylights in caravans and motor homes, trailers and in container construction Suitable for application between metal plates, glass, gfk, wood and other materials Sealing rubber-glass joints in buses, cars, trains and trucks Properties Very low water vapor permeability (0.1 - 0.2 g/day/m²) excess Dekaseal 8936 can be easily removed after a few minutes Very good uv aging resistance, proven quality Resistant to water, road salt, weathering influences Sealant must be fixed between a mechanical joint Generally good adhesion to most substrates without pretreatment Long shelf life, unopened min. two years Cannot be overpainted Adhesion In general, Dekaseal 8936 adheres well without pretreatment to clean, dry, dust and grease free substrates of aluminum, stainless steel, zinc, copper, brass, powder coated metal, most painted metal surfaces, glass, pvc, polyester (grp), painted wood and other surfaces. No adhesion without pretreatment on polyethylene, polypropylene and Teflon®. For properties on substrates not mentioned and further information, please contact Dekalin. Processing Dekaseal 8936 can be applied by hand or with a compressed air gun. When using compressed air, 2 - 3 bar are required. The areas to be sealed must be solid, clean, dry and free of grease. Paint and smooth into joints, crevices, etc. excess material can be dabbed off with itself after a short flash-off time. The material can be removed with turpentine substitute. The sealant remains slightly tacky after drying, but is odorless and compatible with paint. Technical data Base material: polyisobutene, synthetic resins, fillers and solvents Specific gravity (20°C), din 51757: approx. 1.4 kg/liter Temperature resistance: -30°C - +100°C Application temperature: +5°C - +35°C Color: anthracite Packaging size: 310ml cartridge Scope of delivery: 1x Dekalin Dekaseal 8936 cartridge 310ml anthracite

M10 hex nut, fitting for various applications and systems in the field of module mounting. Material: VA stainless steelType:  M10Thickness: 7,64mm  

The hm-350 from Hoymiles is the perfect micro inverter for your balcony power plant. The compact lightweight (only 1.98kg including the 1.35m AC cable) is suitable for solar power production with a solar panel up to 440 watts peak. Just like all other microinverters from Hoymiles, it is suitable for long operating hours and wide PV panel application because its startup is very low (only 22v) and the DC input range of the operating voltage (16-60V) is extremely wide. Features Minimize the effects of e.g. shading, dust or aging due to mppt High-quality energy harvesting with high mppt accuracy Optimal system reliability Peak efficiency of 96.7% 12-year product warranty High level of security thanks to integrated protection functions Easy installation Long service life 6000V surge protection Complies with vde-ar-n 4105: 2018 and EN50549-1:2019 Optionally possible: Monitoring via S-Miles App or S-Miles Cloud A DTU Lite is required for system monitoring. To have the option of changing settings in addition to monitoring, a DTU Pro is required instead of the DTU Lite. How it works The Hoymiles microinverter converts the solar power generated by your photovoltaic system, AC grid compliant and feeds it directly into the utility grid. Each Hoymiles microinverter is individually connected to a PV module of your system for this purpose. This unique configuration means that each PV module is controlled by an individual maximum peak power point tracker (mppt). This ensures that the maximum available power from each individual module is fed into the utility grid, regardless of the output of the other PV modules in the system. Thus, if individual PV modules in the system are affected by shading, soiling, orientation, or mismatch, the hm-350 still ensures peak power for its associated PV module. The result is the maximum possible energy production from your PV system. Optimal reliability Microinverter systems are inherently more reliable than conventional inverters. The decentralized design of a microinverter system ensures that the entire PV system will not fail in the event of a malfunction. Hoymiles microinverters are designed to operate at full power in ambient temperatures up to +65°C (150°F). The microinverter enclosure is designed for outdoor installation and is IP67 rated. Simple design PV systems with Hoymiles microinverters are very easy to design and install. You can install a combination of PV modules of different types, in any orientation and in a desired number (Maximum number of devices in series: 14). You do not need to install cumbersome conventional inverters. Each microinverter can be quickly mounted on the PV mounting rack or directly under the PV module. The PV module is connected to the microinverter directly on site, eliminating the risk of exposing people to dangerously high DC voltage. Technical data Recommended module power: up to 440W Peak power mppt of voltage range: 33~48V Starting voltage: 22V Battery voltage range: 16~60V Maximum input voltage: 60V Maximum input current: 11.5A Maximum input short circuit current: 15A Rated output power: 350VA Rated output voltage: 1.52a at 230V Rated output current: 230V CEC weighted efficiency: 96.50% Ambient temperature range: -40~+65°C Dimensions (WxHxD): 182 x 164 x 29mm Weight: 1.98kg (including 1.35m AC cable) Enclosure rating: IP67 Scope of delivery Hoymiles hm-350 micro inverter

The Hoymiles hms Field-Connector is an essential part of the Hoymiles hms PlugandPlay cable system, specifically designed for PV systems with a single microinverter.The Field-Connector connects directly to the inverter and provides an easy connection option to an AC cable. This straightforward plug-and-play design allows users to quickly and easily connect the single inverter system to the power grid.Connection to the power grid must only be done by an electrician.Hoymiles hms cable systemThe hms cable system is an innovative solution for wiring hms inverters in PV systems. It offers a user-friendly plug-and-play design that allows for easier, faster and more reliable installation. The flexible hms cable system allows users to combine cables of different sizes or lengths to cost-effectively implement the desired cabling configuration.ExamplesIn a system with one hms inverter:1x hms Connection cable PlugandPlay with field connector and Schuko plugor1x hms Field connector for own assembly of a cableFor a system with e.g. 2 hms inverters:1x hms Sealing Cap1x hms Connection Cable2x hms Trunk ConnectorOptional: - hms Extension Connector for extension of the cable - hms Disconnect Tool for disassembling the connectorTechnical DataRated voltage: 300VRated current: 12APower frequency and dielectric strength: 3000VACTemperature range: -40 to 85°CDimensions: 135 x 38 x 25mmProtection class: IP68for cables with outer diameter 8 - 9,5mmApplicable cables: 16/18 awg, 1.0/1.5mm² copper cableScope of delivery:1x Hoymiles hms Field Connector

Lapp solar xlr-r cables are weather-, abrasion- and uv-resistant photovoltaic cables. These halogen-free, double-insulated and cross-linked solar cables are suitable for permanent outdoor use to connect grounded and ungrounded photovoltaic systems. They are used both for wiring solar modules to each other and for connecting the individual module rows and the inverter. The cable has been tested by TÜv Rheinland according to 2 PfG 1169/08.2007 (pv1-f) design. Important product features: Cable cross-section: 1x4mm Manufacturer: Lapp Kabel Color outer insulation: Black Color inner insulation: White xlr-r solar cables from Lapp can generally be laid in protective tubes suitable for buried installation in the ground if it is ensured that there is no permanent contact with water and that waterlogging is safely drained away. The laying of the cables in the ground as well as the correct design of the cable trench must comply with vde 0100 part 520 or comparable standards in order to prevent damage to the protective conduit and permanent exposure of the cables and conduits to penetrating water. Long-term, permanent storage as well as permanent operation of the cables in or under water is not permitted. Conductor construction 1. Conductor: Fine stranded wire of tinned cu-wires, according to iec 60228, class 5 2. Core insulation: electron beam crosslinked polyolefin co-polymer 3. Outer sheath Electron beam crosslinked polyolefin co-polymer Outer sheath color: black or black with red or blue stripe Electrical properties Rated voltage: u0 /u according to iec ac 600/1000 v dc 900/1500 v Max. permissible system voltage: 1.8 kv dc (conductor/conductor, not grounded system) according to TÜv 2 PfG 1169/08.2007 Test voltage ac 6.5 kv Thermal characteristics Temperature range fixed: -40° c to +120° c max. conductor temperature (according to en 60216-2) Temperature range according to fixed installation: -40 °c to +90 °c ambient temperature TÜv 2 PfG 1169/08.2007 installation temperature flexible: max. -25 °c Thermal pressure resistance according to en 60811-3-1 Humidity-heat test according to en 60068-2-78 at 85% humidity mechanical properties Minimum bending radius occasionally moved: 15 x cable diameter permanently installed: 5 x cable diameter Dynamic penetration according to dke requirement profile Pv1-F ak 411.2.3 appendix F Tear resistance according to dke requirement profile Pv1-F ak 411.2.3 Annex G Testing of tensile strength and elongation according to en 60811 chemical properties Weathering / Uv resistance according to hd 605/A1 Ozone resistance according to en 50396 Halogen free according to en 50267 Fire resistance flame retardant according to iec 60332-1-2 Acid and alkali resistance according to en 60811-2-1 (oxalic acid and caustic soda)

Lapp SOLAR XLS-R T 2x4mm is a radiation cross-linked high-end solar cable made in Germany with optimised cable design, the solar cable is slim, light and robust and saves a lot of time during installation. The twin cable can be easily separated into two cables if necessary. You do not need any special tools for this. Nevertheless, the connection of the two wires is extremely stable if you prefer to leave the cable together. This article is sold by the metre. Each item corresponds to one metre. If you buy e.g. 10x this article, you will receive a coherent piece with 10m length. Product features Weather/UV resistant according to HD 605/A1 Ozone resistant according to EN 50396 Halogen free and flame retardant Good notch and abrasion resistance XLS-R T= X-Linked Standard-Reduced Twin Proven electron beam crosslinked quality Standard references / approvals Also available as TÜV PV1-F certified version on request - Ideal for stand-alone PV systems Areas of application Ideal for stand-alone PV systems Gable and flat roof photovoltaic systems Photovoltaic or solar field systems Flexible or building-integrated PV systems Benefit Easy to separate into two individual lines Reduced outer diameters allow space- and weight-saving installation Robust against mechanical impact Reduction of fire spread and toxic smoke formation in case of fire Exact quantity control during installation due to metre marking on the cable jacket Structure Fine stranded, tinned copper conductor Core insulation of irradiated copolymer Outer sheath of irradiated copolymer Outer sheath colour: Black Cores connected in parallel with separator Technical data Core ID code: black / red - blue / red Classification: ETIM 5.0 Class-ID: EC001578 ETIM 5.0 Class-Description: Flexible cable Conductor construction: Fine-stranded according to VDE 0295, Class 5 / IEC 60228 Cl.5 Minimum bending radius: Fixed installation: 4 x outer diameter Rated voltage: AC U0/U : 600/1000 V DC U0/U : 900/1500 V Max. permissible system voltage: DC 1.8 kV (conductor-conductor, not earthed system) Test voltage: AC 6500 V Temperature range: -40°C to +100°C max. conductor temperature Lapp SOLAR XLS-R T 2x4mm is a radiation cross-linked high-end solar cable made in Germany with optimised cable design, the solar cable is slim, light and robust and saves a lot of time during installation. The twin cable can be easily separated into two cables if necessary. You do not need any special tools for this. Nevertheless, the connection of the two wires is extremely stable if you prefer to leave the cable together.