Offgridtec Solar direct 400w hm-400 balcony power plant mounting package flat roof earthed socket 10m

The complete balcony power station systems from Offgridtec (MPN 014530) are an ideal way to produce some of the household electricity you need yourself and significantly reduce your overall expenditure on electricity. In addition to a solar module and matching micro inverter, the systems contain everything you need to connect to the household power grid and, if required, to mount on the balcony railing or roof. The set is designed for mounting the modules side by side. Our support team is on hand to provide advice and assistance for customised module installation options. How does a balcony power station work? The Offgridtec balcony power station is a compact solar power system. It consists of a solar module and the matching Hoymiles micro inverter for feeding into the household power grid. Ideally, the inverter is attached directly to the substructure of the solar module and connected to the solar module using the solar plug connector. The AC cable is connected via the Betteri connection of the inverter and routed directly to the appropriate socket. Here you can choose between connection to the standard Schuko socket or to a Wieland feed-in socket, which is included in the scope of delivery when selected. No special settings are required to utilise the solar power generated in the domestic power grid. If electricity is already available from local sources, the appliances in the household use this first and then supplement with mains power as required. The complete balcony power station system contains 2x Luxen Solar 430W Full Black Solar module Luxneri S5 1x Hoymiles HM-600 Microinverter 1x Connection cable Betteri BC01 socket to Schuko socket (length selectable 5m - 10m - 15m) Oder 1x Connection cable Betterie B01 socket to Wieland RST20I3S connection (length selectable 5m - 10m - 15m) Optionally selectable: Installation package for balcony railing - flat roof - plain tile roof - tiled roof - corrugated hernite and sheet metal roof (the respective sets contain 1.25 m long profile rails suitable for the balcony power station) Luxen 430W Luxneri Series 5 (Full Black) - Efficiency of 22% The monocrystalline and bifacial 430W Series N5 solar module from Luxen Solar impresses with a combination of different technologies, such as N-TOPCon cell technology and a 108 half-cell layout. SMBB half-cut cell technology was also used during production to increase performance. The state-of-the-art solar module represents the pinnacle of solar technology, offering impressive power output and low LCOE. The elegant full-black design makes it a good choice when it comes to finding a solar cell for rooftop installations on residential buildings or for balcony power plants and many other applications. Properties Glass-glass module N-TOPCon cell technology SMBB Half-Cut cell technology Low BOS & LCOE Bifacial cell module technology Excellent anti-PID and low LID performance 3 bypass diodes 30-year performance guarantee and 15-year product guarantee High cell efficiency of over 22% Half-cell technology In half-cell technology ("half-cut"), conventional silicon cells are cut in half using a laser. The resulting halves are then connected centrally in parallel, which leads to increased solar module output by reducing resistance losses. Bifacial cells Bifacial means two-faced. And the name says it all: the Luxen Solar 430W N5 module is also equipped with solar cells on the back, which means it can absorb sunlight even better and increases the efficiency of the overall module. Technical data Maximum power: 430W Module voltage (Vmp): 32.04V max. current (Imp): 13.42A open circuit voltage (Voc): 38.96V short-circuit current (Isc): 14.13A Module efficiency: 22.02% Dimensions: 1722 x 1134 x 30 mm Operating temperature range: -40°C to +85°C Cells: 108 (6x18) Max. operating voltage: 1500V DC Weight: 23.5kg Hoymiles HM-600 Microinverter Module inverter The HM-600 from Hoymiles is the perfect microinverter for your balcony power plant and is suitable for solar power production with a solar panel up to 500 watts peak power. As with all other Hoymiles microinverters, it is suitable for long operating hours and wide PV module applications, as its start-up is very low (only 22V) and the DC input range of the operating voltage (16-60V) is extremely wide. The Hoymiles micro inverter converts the solar power generated by your photovoltaic system in line with the AC grid and feeds it directly into the utility grid. Each Hoymiles micro inverter is connected individually to a PV module in your system. This unique configuration means that each PV module is controlled by an individual Maximum Peak Power Point Tracker (MPPT). This ensures that the maximum available power from each individual module is fed into the supply grid, regardless of the output of the other PV modules in the system. So if individual PV modules in the system are affected by shading, soiling, alignment or mismatching, the HM-600 still guarantees peak power for its associated PV module. The result is the maximum possible energy production from your PV system. Recommended module power: up to 380W Maximum input voltage: 60V Maximum input current: 2*11.5A Rated output power: 600VA Battery voltage range: 16~60V Dimensions (WxHxD): 250 x 170 x 28mm Weight: 3kg (including 2.06m AC cable) Connection set For the connection cable, you have the option of choosing between a connection for a normal earthed socket or a Wieland feed-in socket. If you choose the latter, the complete system includes an AC extension cable (length selectable) with a Betteri BC01 plug, suitable for the HM-600 inverter, at one end and an angled Schuko plug at the other end of the cable. This enables quick and uncomplicated connection to the Schuko sockets (plug type F) commonly used in Germany. If the Wieland variant is selected, the AC cable has an angled Wieland RST20I3S plug at the cable end for installation in accordance with current technical regulations (e.g. VDE standard AR-N-4105). The appropriate feed socket is then included in the scope of delivery. With the Wieland plug, the pins are not completely exposed, as with the Schuko plug, which minimises the risk of arcing between pin and socket and therefore the risk of overheating and fire. Optional mounting systems The Offgridtec balcony power stations are available with or without mounting sets. Mounting sets are available for: Balcony railings: with matching C-hooks Flat roof: inclination angle 10° - 60° Plain tile roof: with plain tile roof hooks Tiled roof: with 3-way adjustable roof hooks Corrugated hernite and sheet metal roof: with stainless steel hanger bolts Balcony power plants in Germany There is currently no law or ordinance in Germany that regulates the generation of solar power for purely domestic use. The maximum limit of 600W AC PV power is a reserve value which, according to the current VDE standard, can be fed into an existing socket circuit in a house without overloading it. Nothing is described for independent circuits without additional load. Every electrical installation should be VDE-compliant. However, the operation of a balcony power station via the standard earthed socket is not generally prohibited. Registration with the Federal Network Agency is mandatory. However, there are no known cases of fines for failure to register balcony power stations, or insurmountable problems with network operators. The system operator is responsible for complying with and implementing standards and obligations. A great deal of technical and legal information can already be found on relevant websites. Do you have further questions about balcony power stations and how they work? Contact us, we will be happy to help you.

The complete solar systems from Offgridtec (MPN 014535) are an ideal way to produce a portion of your required household electricity yourself and significantly reduce your overall expenditure on electricity. In addition to a solar module and matching micro inverter, the systems contain everything you need to connect to the household power grid and, if required, to mount on the balcony railing or roof. The set is designed for mounting the modules side by side. Our support team is on hand to provide advice and assistance for customised module installation options. How does a solar system work? The compact Offgridtec solar system consists of a solar module and the matching Hoymiles micro inverter for feeding into the household power grid. Ideally, the inverter is attached directly to the substructure of the solar module and connected to the solar module using the solar plug connector. The AC cable is connected via the Betteri connection of the inverter and routed directly to the appropriate socket. Here you can choose between connection to the standard Schuko socket or to a Wieland feed-in socket, which is included in the scope of delivery when selected. No special settings are required to utilise the solar power generated in the domestic power grid. If electricity is already available from local sources, the appliances in the household use this first and then supplement with mains power as required. The complete solar system includes: 4x Luxen Solar 430W Full Black Solar module Luxneri Series 5 1x Hoymiles HM-1500 Microinverter 1x Connection cable Betteri BC01 socket to Schuko socket (length selectable 5m - 10m - 15m) 4x 3m 6mm² MC-4 connection cable plug/socket extension Or 1x Connection cable micro inverter with Betteri BC01 socket to earthed socket (length selectable 5m - 10m - 15m) Optionally selectable: Installation package for balcony railings - flat roof - plain tile roof - tiled roof - corrugated hernite and sheet metal roof (the respective sets contain 1.25 m long profile rails suitable for the solar system) Luxen 430W Luxneri Series 5 (Full Black) - Efficiency of 22% The monocrystalline and bifacial 430W Series N5 solar module from Luxen Solar impresses with a combination of different technologies, such as N-TOPCon cell technology and a 108 half-cell layout. SMBB half-cut cell technology was also used during production to increase performance. The state-of-the-art solar module represents the pinnacle of solar technology, offering impressive power output and low LCOE. The elegant full-black design makes it a good choice when it comes to finding a solar cell for rooftop installations on residential buildings or for balcony power plants and many other applications. Properties Glass-glass module N-TOPCon cell technology SMBB Half-Cut cell technology Low BOS & LCOE Bifacial cell module technology Excellent anti-PID and low LID performance 3 bypass diodes 30-year performance guarantee and 15-year product guarantee High cell efficiency of over 22% Half-cell technology In half-cell technology ("half-cut"), conventional silicon cells are cut in half using a laser. The resulting halves are then connected centrally in parallel, which leads to increased output of the solar module by reducing resistance losses. Bifacial cells Bifacial means two-faced. And the name says it all: the Luxen Solar 430W N5 module is also equipped with solar cells on the back, which means it can absorb sunlight even better and increases the efficiency of the overall module. Technical data Maximum power: 430W Module voltage (Vmp): 32.04V max. current (Imp): 13.42A open circuit voltage (Voc): 38.96V short-circuit current (Isc): 14.13A Module efficiency: 22.02% Dimensions: 1722 x 1134 x 30 mm Operating temperature range: -40°C to +85°C Cells: 108 (6x18) Max. operating voltage: 1500V DC Weight: 23.5kg Hoymiles HM-1500 Microinverter Module inverter The HM-1500 from Hoymiles is the perfect microinverter for your solar system and is suitable for solar power production with a solar panel up to 470 watts peak power. As with all other Hoymiles microinverters, it is suitable for long operating hours and wide PV module applications, as its start-up is very low (only 22V) and the DC input range of the operating voltage (16-60V) is extremely wide. The Hoymiles micro inverter converts the solar power generated by your photovoltaic system in line with the AC grid and feeds it directly into the utility grid. Recommended module power: up to 470W Maximum input voltage: 60V Maximum input current: 4*11.5A Rated output power: 1500VA Battery voltage range: 16~60V Dimensions (WxHxD): 280 x 176 x 33mm Weight: 3.75kg (including 2.06m AC cable) Optional monitoring of your system is only possible with a data transmission unit (DTU). Here you have the choice between the DTU Lite and the DTU Pro (available soon in the shop). Connection set For the connection cable, you have the option of choosing between a connection for a normal earthed socket or a Wieland feed-in socket. If you choose the latter, the complete system includes an AC extension cable (length selectable) with a Betteri BC01 plug, suitable for the HM-1500 inverter, at one end and an angled Schuko plug at the other end of the cable. This enables quick and uncomplicated connection to the Schuko sockets (plug type F) commonly used in Germany. If the Wieland variant is selected, the AC cable has an angled Wieland RST20I3S plug at the end of the cable for installation in accordance with current technical regulations (e.g. VDE standard AR-N-4105). The appropriate feed socket is then included in the scope of delivery. With the Wieland plug, the pins are not completely exposed, as with the Schuko plug, which minimises the risk of arcing between pin and socket and therefore the risk of overheating and fire. Optional mounting systems Offgridtec solar systems are available with or without mounting sets. Mounting sets are available for: Balcony railing: with matching C-hooks Flat roof: pitch angle 10° - 60° Plain tile roof: with plain tile roof hooks Tiled roof: with 3-way adjustable roof hooks Corrugated hernite and sheet metal roof: with stainless steel hanger bolts Solar installations in Germany There is currently no law or ordinance in Germany that regulates the generation of solar power for purely domestic use. The maximum limit of 600W AC PV power is a reserve value which, according to the current VDE standard, can be fed into an existing socket circuit in a house without overloading it. Nothing is described for independent circuits without additional load. Every electrical installation should be VDE-compliant. However, the operation of such a solar system via the standard earthed socket is not prohibited. Registration with the Federal Network Agency is mandatory. However, there are as yet no known cases of fines for failure to register such solar systems, nor any insurmountable problems with grid operators. Compliance with and implementation of standards and obligations is the responsibility of the system operator. A great deal of technical and legal information can already be found on relevant websites. Do you have further questions about solar energy systems and how they work? Contact us, we will be happy to help you.

Offgridtec's Solar Direct Complete Systems (MPN 015570) are an ideal way to produce a portion of your required household electricity yourself and significantly reduce your overall expenditure on electricity. From the solar module and micro-inverter to the connection cables, our systems contain everything you need for the connection. For individual installation options of the modules, our support team is available to give you advice and assistance. Highlights of the HMT solar systems Scalable performance: The system can be expanded and interconnected with HMT kits at any time. Everything you need for this is included in the scope of delivery. Scalable in 2.7KW steps: 2.7KW / 5.4 KW / 8.1 KW etc.... Feeding takes place on 3 phases: Ideal for properties or commercial operations that have a high base load to cover during the day. Connection to the mains supply may only be carried out by an electrician. The 2700W Solar Direct complete system includes: 6x 450W Luxen Solar Black Luxpower Series 5 Solar Panel 1x Hoymiles HMT-2250-6T Microinverter 3-phase 1x Hoymiles T-Node Set with AC Cable 3m for HMT Inverter 4x 3m 6mm² MC-4 Connecting Cable Plug / Socket Extension 4x 5m 6mm² MC-4 Connecting Cable Plug / Socket Extension 1x Hoymiles HMT 3p-AC Box Disconnect Tool 1x Hoymiles HMT 3p-AC Box Unlock Tool 1x Hoymiles HMT 3p-AC Box End Cap Hoymiles HMT-2250-6T Microinverter Module Inverter 3-phase The HMT-2250-6T from Hoymiles is the perfect microinverter for your balcony power plant. The compact lightweight (only 6kg) is suitable for solar power production with up to six solar panels up to 505W each. Just like all other Hoymiles microinverters, it is suitable for long operating hours and wide PV panel application, as its start-up is very low (only 22V) and the DC input range of the operating voltage (16-60V) is extremely wide. Recommended module power: up to 505W (per module) MPPT voltage range: 16-60V Switch-on voltage: 22V Maximum input current: 6x11.5A Mains connection: Three-phase Rated output power (VA): 2250 Rated output current: 3.26 x 3 Rated output voltage / range: 230 V/AC/400 V/AC, 3W+N+PE Ambient temperature range: -40~+65°C Dimensions (WxHxD): 330 x 250 x 37 mm Weight: 6 kg (including 1.35m AC cable) Enclosure rating: IP67 HMT accessories You need a T-node with cable for each HMT microinverter. An end cap and an unlocking aid are required at least once for each HMT microinverter system (from one inverter). All HMT accessories listed here are included in this set. Luxen Solar 450W Full Black Solar Panel Luxpower S4 The Luxpower 450W Full Black solar module (LNVK-450M) from the Series 5 by Luxen Solar is the successor to the 450W Luxen solar module from the Series 4 (LNSU-450M). The Luxpower module utilizes advanced monocrystalline technology with a gallium-doped structure and a 120-half-cell layout. It offers excellent Anti-PID performance, three integrated bypass diodes, and a split arrangement of cell strings. This ensures high hot-spot resistance for individual use as well as reliable power output in strings with multiple modules, even under unfavorable lighting conditions or partial shading. Its elegant Full-Black design makes it the ideal choice for solar installations on residential buildings, balcony power plants, and many other applications. Technical data of the solar modules Power (Pmax): 450 Wp Voltage (Vmp): 35.07 V Max. Current (Imp): 12.83 A Open-circuit voltage (Voc): 42.31 V Short-circuit current (Isc): 13.72 A Module efficiency: 20.78% Operating temperature: -40°C - +85°C Max. System voltage: 1500 VDC (IEC) Cell type: Half-Cut - Monocrystalline Number of cells: 120 (6x20) Weight: 23 kg Dimensions: 1910 x 1134 x 35mm System monitoring Optional: System monitoring via the smartphone app S-Miles Enduser or the S-Miles Cloud. The DTU-PRO-S data transmission unit is required for this. Connection set The system comes with MC4 to MC4 connection cables in different lengths. The connections are designed so that the modules are mounted in two rows, each with three modules (upright). If the standard connection cables are not sufficient for you, you will find an additional selection of ready-made connection cables in our shop Sie haben weitere Fragen zu Solaranlagen und deren Funktionsweise? Sprechen Sie uns an, wir helfen Ihnen gerne weiter.