Victron LFP-BMS 12,8V/60Ah LiFePO4 Battery

The lfp-bms 12.8v 60Ah (mpn bat512060410) from victron Energy is a latest generation LiFePO4 battery. When fully charged, lfp 12.8/60 stores a whopping 768Wh of power with a very low self-discharge rate and superior cycle life. The lfp battery family from victron already features integrated cell balancing and a bms (battery management system) interface.

important technical data of the lfp bms 12.8v 60Ah:

• Rated voltage: 12.8v
• victron Part number: bat512060410
• Rated energy at 25°c*: 768Wh
• Rated capacity at 25°c/0°c/-20°c: 60Ah / 48Ah / 30Ah
• Number of cycles at 80%/70%/50% depth of discharge: 2500 / 3000 / 5000 cycles
• recommended continuous discharge current:<60A
• Maximum continuous discharge current: 120a
• Weight: 12kg
• Connection terminal: m8

For more technical data, please refer to the official datasheet and below in the "technical data" section.

Efficient and economical: the lfp-bms 12.8v 60Ah

Although lfp batteries are expensive compared to agm batteries or gel batteries, the higher initial cost will more than pay for itself in most cases. With a lifetime of up to 5000 cycles, they exceed the maximum lifetime of even the best lead-acid batteries many times over. In addition, the lfp 12.8/60 scores 70% in terms of space savings and weight savings. The energy efficiency of 92% is also significantly higher than the 80% of lead-acid batteries, which can be essential for off-grid systems, especially for off-grid solar and/or wind power plants.

Multi-talented: infinitely flexible with lithium technology from victron Energy

lfp bms lithium batteries from victron can be implemented in almost all common applications. In the mobile sector, this technology has played an important role for quite some time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and irregular charging does not harm them, they are also making their way into land applications and can now be found in almost all system classes.

Bluetooth

Parallel and series connection up to max. 3000ah at 48v

Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 10 batteries of this type in parallel and up to 4 blocks of 10 in series, resulting in a maximum of 3000Ah at 48v - this corresponds to a maximum storable nominal energy of about 154,000 Wh

5 models available in total

The lfp-bms family consists of a total of 5 models. In addition to the lfp 12.8/60, there are the following other power classes:

• 12.8v 90Ah LiFePO4 1152Wh
• 12.8v 160Ah LiFePO4 2048Wh
• 12,8v 200Ah LiFePO4 2560Wh
• 12.8v 300Ah LiFePO4 3840Wh

IMPORTANT NOTICE: The use of an additional bms is mandatory to interrupt or shut down the load when the voltage of a battery cell drops below 2.5v or to stop charging when the voltage of a battery cell rises above 4.2v and to shut down the system when the temperature of the cell exceeds 50°c.

For this you have the choice between the bms 12/200 and the vE.Bus bms - For further details of the devices, please refer to the respective article descriptions.

Due to the classification as dangerous goods, this product will be shipped by freight forwarding!

Scope of delivery:

1x LiFePO4 battery lfp-cB 12.8/60, victron Energy bat512060410
1x instruction manual