10 m Heat-Shrink Tubing, 4.8 mm to 2.4 mm, Black, 2:1 – Offgridtec Cable Insulation

The 10-meter dispenser box from Offgridtec (MPN: 000570) contains black heat-shrink tubing for insulating and protecting cables, wires, and electrical connections. Thanks to its 2:1 shrink ratio, the inner diameter reduces from 4.8 mm to 2.4 mm when heated, ensuring a precise fit and a permanently secure covering. The convenient dispenser box allows for clean removal and custom cutting to the desired length.

Durable heat-shrink tubing for cable insulation and reliable protection

• Shrink ratio 2:1 (4.8 mm to 2.4 mm)
• 10 m tube length in a convenient dispenser box
• Suitable for insulating cables and protecting electrical connections
• Flame-retardant and halogen-free material
• Low shrink temperature for easy application
• Protection against moisture, UV radiation, corrosion, and mechanical stress
• Can be cut to any desired length
• Black version for a discreet and professional cable installation

Typical applications

• The heat-shrink tubing is suitable for, among other things:
• Cable insulation
• Repairing damaged cable insulation
• Protecting soldered and crimped connections
• Photovoltaic and solar systems
• RV and trailer electrical systems
• Automotive and motorcycle electrical systems
• Model making
• Industry and control panel construction
• DIY and workshop applications

Reliable Protection for Cables and Connections

When heated, the heat-shrink tubing contracts evenly and forms a tight seal around cables or connection points. This reliably insulates electrical contacts while protecting them from moisture, dust, UV radiation, and corrosion. The material used is flame-retardant, halogen-free, and free of PBB, PBBO, and PBBE. The lead content is less than 10 ppm, and the cadmium content is less than 5 ppm.

Easy to Use

The shrinking process begins at a temperature of approximately 70 °C. A temperature of at least 100 °C is recommended for complete shrinkage. The heat-shrink tubing can be applied quickly and evenly using a heat gun or a comparable hot-air tool. It can be flexibly cut to the desired length prior to installation.

Technical Data

• Color: Black
• Length: 10 m
• Inner diameter before shrinking: 4.8 mm
• Inner diameter after shrinking: 2.4 mm
• Shrink ratio: 2:1
• Wall thickness: 0.25 mm / 0.55 mm
• Minimum shrinkage temperature: 70 °C
• Temperature for complete recovery: 100 °C
• Operating temperature: -55 °C to +125 °C
• Tensile strength: >14 MPa (ASTM D2671)
• Elongation at break: 400% (ASTM D2671)
• Eccentricity: <30% (ASTM D2671)
• Flammability: VW-1
• Volume resistivity: 10¹⁴ Ω·cm (IEC 93)
• Copper resistance: in accordance with UL224
• Heat aging/tensile strength: unchanged (>12 MPa)
• Elongation at break after heat aging (158 °C / 168 h): >350 %
• Material: halogen-free (PBB/PBBO/PBBE-free)
• Approvals: UL224 125 °C VW-1 600 V, RoHS-compliant

Contents

1x Offgridtec heat-shrink tubing 4.8 mm > 2.4 mm Black - 10 m in dispenser box