The bc01 Female from Betteri (mpn bc01B) is used for connection to a Envertech-, Hoymiles- or Huayu inverter. The opposite side can be connected to a h07rn-f rubber hose cable with a diameter of 10-14mm. It is a three-pole socket made of UV-resistant material. In addition, it is dustproof and waterproof according to protection class ip67, making it suitable for indoor and outdoor use. Product features Suitable for 1-phase inverters from e.g. Envertech, Hoymiles or Huayu Suitable for cables with a diameter of 10-14mm Dust and waterproof according to ip67 UV resistant - Suitable for indoor and outdoor installation Technical features Number of poles: 3-pole Material: plastic Operating temperature range: -40°C - +85°C Rated voltage: 230v AC Rated current: 25A Dimensions: 85.5 x 34.8 x 34.8 mm Weight: approx. 50g Scope of delivery: 1x Betteri bc01 female power plug

The end cap of Betterie (mpn bc01c) is used to close the unused 3 pole AC socket of the PV inverter of e.g. Envertech, Hoymiles or Huayu. Product features Suitable for 1-phase inverter from e.g. Envertech, Hoymiles or Huayu Closure of Betteri bc01 Female connector Dust and waterproof according to ip67 UV resistant - Suitable for indoor and outdoor mounting Scope of delivery: 1x Betteri Closure cap for bc01 socket

The bc01 connector Male from Betteri (mpn bc01B) is used for connection to a Envertech-, Hoymiles- or Huayu inverter. The opposite side can be connected to a h07rn-f rubber hose cable with a diameter of 10-14mm. It is a three-pin connector made of UV-resistant material. In addition, it is dustproof and waterproof according to protection class ip67, making it suitable for indoor and outdoor use Product features Suitable for 1-phase inverters from e.g. Envertech, Hoymiles or Huayu Suitable for cables with a diameter of 10-14mm Dust and waterproof according to ip67 UV resistant - Suitable for indoor and outdoor installation Technical features Number of poles: 3-pole Material: plastic Operating temperature range: -40°c - +85°c Rated voltage: 230v ac Rated current: 25a Dimensions: 85.2 x 34.8 x 34.8 mm Weight: approx. 50g Scope of delivery: 1x Betteri bc01 plug Male power plug

The 5m Plug & Play Micro Inverter Connection Cable from Offgridtec (mpn 8-01-013601) connects your Micro Inverter (e.g.Envertech) with a common grounded socket (Schuko). The cable is equipped with the Betteri bc01 socket part on the inverter side and an angled Schuko plug type f on the socket side. This cable is used for the connection between the micro inverter and your house power supply. special features of the P&P inverter connection cable Immediately ready for use since delivered as Plug & Play version technical features of the 5m Microinverter connection cable Offgridtec-Part number: 8-01-013601 Cable length: 5m Usage; Connection of compatible micro inverters to the house power grid via feed-in socket Connector on socket side: Schuko plug type-f angled Connector on inverter side: Betteri bc01 socket compatible micro inverters EVT Inverter Series from Envertech evt300s / evt560s / EVT1200S TSUN tsol M350/M800 Bosswerk mi300 / MI600 Hoymiles mi-300 / MI-600 a.o. (e.g. Huayu) Scope of delivery: 1x Offgridtec 8-01-013601 5m plug & play connection micro inverter to power outlet

External temperature sensor (MPN 010930) compatible with the Offgridtec PWM Pro and MPPT PRO Duo charge controller series: The sensor detects the battery temperature and forwards this information to the charge controller. Installation of the external sensor enables the charge controller to calculate the optimal charge current depending on the battery temperature. Click here for the models: Offgridtec PWM Pro Charge Controller 12V/24V 10A USB Offgridtec PWM Pro Charge Controller 12V/24V 20A USB Offgridtec PWM Pro Charge Controller 12V/24V 30A USB Offgridtec PWM Pro Charge Controller 12V/24V 45A USB Offgridtec MPPT Pro Duo Charge Controller r12V/24V 30A Scope of delivery: 1x Offgridtec temperature sensor 1-02-010930

Das Hoymiles HMS Plug&Play-Verbindungskabel (5m) ist speziell für den Einsatz in PV-Anlagen mit nur einem HMS-Wechselrichter konzipiert. Es besteht aus einem Field-Connector, einem AC-Kabel und einem AC-Stecker. Der Field-Connector wird an den Inverter und der Stecker an die Haushaltssteckdose angeschlossen. Diese einfache Plug-and-Play-Konstruktion ermöglicht es dem Benutzer, das einzelne Wechselrichtersystem einfach und schnell an das Netz anzuschließen. Der Anschluss an das Stromnetz darf nur von einem Elektriker vorgenommen werden. Hoymiles HMS Kabelsystem Das HMS-Kabelsystem ist eine innovative Lösung zur Verkabelung von Hoymiles HMS-Wechselrichtern in PV-Anlagen. Es bietet ein benutzerfreundliches Plug-and-Play-Design, das eine einfachere, schnellere und zuverlässigere Installation ermöglicht. Das flexible HMS-Kabelsystem erlaubt es dem Benutzer, Kabel unterschiedlicher Größe oder Länge zu kombinieren, um die gewünschte Verkabelungskonfiguration kostengünstig umzusetzen. Beispiele Bei einem System mit einem HMS Wechselrichter: 1x HMS Anschlusskabel Plug&Play mit Field-Connector und Schuko-Stecker oder 1x HMS Field Connector zur eigenen Zusammenstellung eines Kabels Bei einem System mit bspw. 2 HMS-Wechselrichtern: 1x HMS Sealing Cap 1x HMS Connection Kabel 2x HMS Trunk Connector Optional:   - HMS Extension Connector zur Verlängerung des Kabels   - HMS Disconnect Tool zum Zerlegen des Steckverbinders Technische Daten Komponenten: HMS Field Connector + Kabel + AC-Stecker Kabeltyp: PV07AC-F Kabellänge: 3m Querschnitt: 1,0mm² Nennspannung: 250V Nennstrom: 12A Temperaturbereich: -40 bis 85°C Lieferumfang: 1x 5m Hoymiles HMS-Anschlusskabel Plug&Play

The Votronic 5543 tank electrode 12-24 k is a universal tank sensor for measuring the tank level. The tank electrode 12-24 k is suitable for service water and septic tanks as well as for fresh water tanks. By using appropriate materials, these tank sensors also comply with the drinking water regulation din 2001-2. It is designed for tanks with a height of between 12 and 24 cm. As a further special feature, the tank electrodes can be mounted on the top of the tank from the inside as well as from the outside. In the case of fresh water tanks, they can even be mounted on the underside of the tank. . essential product features of the 12-24 k tank electrode Rod electrode, easy to shorten to tank height for tanks with a height between 12 and 24 cm Installation diameter 38 mm (or pg 29 thread) Flange diameter 46.5 m Connection cable 75 cm long Easy adjustment to the given tank height linear, stepless signal of the filling level Test mark: E-testing (EMC/vehicle directive) suitable for 12v and 24v continuous operation optimal in combination with Votronic level indicators The tank sensor is compatible with the following Votronic indicators: . Fresh water tank gauge s, 5311 Waste water gauge s, 5313 Holding tank gauge s, 5315 Info Panel Pro, 5330 Info Panel Pro 24v VPC Terra VPC Mercury VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749 Scope of delivery 1x Votronic 5543 12-24 k tank sensor 1x mounting material consisting of sealing ring, union nut pg 29, connection cable 75 cm1x instruction manual

The Hoymiles Gateway dtu-wLite is a data transmission unit that uses 2.4G wireless communication to collect information and data from microinverters and transmits it to the Hoymiles S-Miles Cloud monitoring system via wLAN technology. The dtu is compatible with the Hoymiles hm and MI series.Using your dtu-wLite, you can easily read module-level data and alarms, and realize and store remote operation and maintenance of the microchanger system anytime, anywhere via the Hoymiles S-Miles Cloud. The monitoring capacity is limited to 4 modules. This makes the system ideally suited for small PV plants.Notice: dtu-wLite is connected to a house power outlet via 5v usb power supply. The power supply is not included in the scope of delivery. It works with almost all usb power supplies that can deliver at least 1a power.FeaturesMonitoring on module level, with up to 4 solar modulesEasy installation thanks to plug and playRemote maintenance of the system via the S-Miles CloudDirect connection (usb port)Real-time data and alarms from microinverters on S-Miles ToolkitLED displayS-Miles account creationThe creation of the S-Miles account can be done directly by the end user. In the download section of this article you can find the instructions from Hoymiles.Technical dataType: Proprietary 2.4 GHz protocol (Nordic)Maximum distance (open area and depending on installation environment): up to 150mLimitation of solar panel monitoring data: 4Signal: wLAN:802.11b/g/nSampling: every 15 minutesLocal app: S-Miles ToolkitPower consumption type 1.0 w / max 5.0 wInput voltage: 5vAmbient temperature range: -20 to +55°CDimensions (WxHxD): 143 x 33 x 12.5 mmWeight: 0,1kgCertificate: CEMicroinverter model: hm series and MI seriesScope of delivery:1x Hoymiles dtu-wLite data transmission unit

The Hoymiles hms Field-Connector is an essential part of the Hoymiles hms PlugandPlay cable system, specifically designed for PV systems with a single microinverter.The Field-Connector connects directly to the inverter and provides an easy connection option to an AC cable. This straightforward plug-and-play design allows users to quickly and easily connect the single inverter system to the power grid.Connection to the power grid must only be done by an electrician.Hoymiles hms cable systemThe hms cable system is an innovative solution for wiring hms inverters in PV systems. It offers a user-friendly plug-and-play design that allows for easier, faster and more reliable installation. The flexible hms cable system allows users to combine cables of different sizes or lengths to cost-effectively implement the desired cabling configuration.ExamplesIn a system with one hms inverter:1x hms Connection cable PlugandPlay with field connector and Schuko plugor1x hms Field connector for own assembly of a cableFor a system with e.g. 2 hms inverters:1x hms Sealing Cap1x hms Connection Cable2x hms Trunk ConnectorOptional: - hms Extension Connector for extension of the cable - hms Disconnect Tool for disassembling the connectorTechnical DataRated voltage: 300VRated current: 12APower frequency and dielectric strength: 3000VACTemperature range: -40 to 85°CDimensions: 135 x 38 x 25mmProtection class: IP68for cables with outer diameter 8 - 9,5mmApplicable cables: 16/18 awg, 1.0/1.5mm² copper cableScope of delivery:1x Hoymiles hms Field Connector

This disconnection aid is required for mounting the Hoymiles hmt microinverter. With the disconnection aid you can disconnect the inverter connection cable from the T-node. Made of Polycarbonate.Accessories Hoymiles hmt inverter systemEach hmt inverter is supplied with a T-node with AC cable is requiredFor each inverter system (from one Microinverter) min. one End cap and an Unlocking aid is requiredOptionally the Release aid and connection cap can be purchasedExample hmt accessory set:One PV system with 4x hmt-2250 (all connected together)4x T-node with AC cable1x disconnection aid1x disconnection aid (optional)1x end capOr:Four PV systems with 4x hmt-2250 (each as a single mini system)4x T-node with AC cable1x unlocking aid1x disconnection aid (optional)4x end capScope of delivery:1x Hoymiles disconnection aid

The LCD solar computer s was developed for operation with all previous and current Votronic solar controllers. Itis equipped with a large display for good readability, which has a time-controlled illumination. The solar charging current (a), solar power (w) and the voltage (v) of the solar battery are displayed. The current counter function counts the "harvested" ampere-hours (Ah) and watt-hours (Wh) and thus simplifies the control of the solaraplant. The counter values can be reset to zero at any time.In terms of dimensions, the device fits seamlessly into the VOTRONIC module system.Scope of delivery:Connection cable 5m, mounting screws, operating instructions, drilling template

This unlocking aid is required for mounting the Hoymiles hmt microinverter. With the unlocking aid you can open the T-node (AC-Box). Made of Polycarbonate.Accessories Hoymiles hmt inverter systemEach hmt inverter is supplied with a T-node with AC cable is requiredFor each inverter system (from one Microinverter) min. one End cap and an Unlocking aid is requiredOptionally the Release aid and connection cap can be purchasedExample hmt accessory set:One PV system with 4x hmt-2250 (all connected together)4x T-node with AC cable1x disconnection aid1x disconnection aid (optional)1x end capOr:Four PV systems with 4x hmt-2250 (each as a single mini system)4x T-node with AC cable1x unlocking aid1x disconnection aid (optional)4x end capScope of delivery:1x Hoymiles release aid

Bluetooth Connector s-bc from Votronic The Votronic Energy Monitor consists of a special communication module (Bluetooth Connector s-bc), which in conjunction with a Votronic solar charge controller (from 2014 serial number (serial number 14Vxx.xxxxx)) with lcd solar computer s and/or the lcd battery computer s or vpc Jupiter with smart shunt additionally transmits the values shown on the corresponding display to a mobile device via Bluetooth. The required app for Android or IOs is available free of charge in the Google Play store or IOs App store respectively Connecting the Bluetooth Connector s-bc is very easy. It is simply plugged between the Votronic solar charge controller and the lcd-solar computer s or between the smart shunt and the lcd-battery computer s or vpc Jupiter using the modular cables included in the scope of delivery The device has 2 inputs and outputs each, so that 1 solar controller with lcd-solar computer and 1 smart-shunt with lcd-battery computer or vpc Jupiter can be connected together to one communication module In this way, the entire information of the on-board battery, such as voltage, charging or discharging currents and the remaining capacity, as well as all data of the solar system can be read comfortably via the cell phone or tablet. In addition, the most important data is logged, graphically processed and stored for a longer period of time. even the output as CsV file for own analysis purposes is possible. Of course, the Bluetooth Connector s-bc can also be installed subsequently at any time Technical features Connection via Bluetooth 4.0 (2.4Ghz) Range up to 50 outdoors Compatible with Votronic solar controller, VBCs Triple Charger, lcd battery computer and vpc Jupiter Dimensions HxWxD in mm: 75 x 47 x 24 Weight: 37g Approval mark: ce, e-test (EMC/vehicle directive) Scope of delivery: Votronic Bluetooth Connector s-bc (mpn 1430), operating instructions, 2 x control cable 6-pin 1m long

Up to 10 circuits with different current levels can be connected to the Smart Home Panel for the Home Backup System. The matching relay modules are available in different versions.FeaturesSuitable for EcoFlow Smart Home PanelEasy to installEach module has an overcurrent protection fuse for each circuitInformation in case of relay replacement on any faults through led on the unit and the Ecoflow appOptional: 6a, 13a, 15a, 16a 20a, 30AScope of delivery:1x EcoFlow Smart Home Relay Module (1 piece per selection: 6a, 13a, 15a, 16a 20a or 30A)

When the 2 sensor connections of the module come into contact with water, the built-in relay switches on. This can be used to control sirens, other shutdown relays, etc.

The Offgridtec Remote Meter (mpn 012990) is specially designed for the Offgridtec psi-pro inverters. It displays the current parameters of the inverter on an LCD screen. Various parameters can be adjusted individually. Features Dual interface design Compatible with psi-pro series With limited possibilities also compatible with psi series (for explanations see user manual) LCD screen Dynamic real-time display of system data Visual error codes - timely notification of warnings and errors ON/OFF button control to directly control the load output Intuitive user interface Easy installation Technical data Power supply: 5 V/DC LCD backlight: Yes Installation method: Surface mount Working temperature: -20°C - +60°C Dimensions mounted: 100 x 19.4 mm (diameter x height) Size mounting holes: 3.5 mm Net weight: 65 g Scope of delivery: 1x Offgridtec Remote Meter 012990 1x rs485 to rj45 cable 1x user manual

Allows the connection of mobile phones, navigators, PDAs, MP3-players, etc. to a bicycle dynamo. The charge controller has an USB-A jack. It is thus possible to use many charging cables of various devices. A charging cable with micro USB plug is enclosed. In addition this charge controller is especially powerful: input voltage up to max. 70 V (may occur with hub dynamos at very high speeds). Output: 5 V max. 800 mA (if your dynamo can produce this output, otherwise the current is lower: max. approx. 500 mA). Please note that you need a dynamo cable (not included) for a proper installation.

The input voltage must be at least 3 V higher than the adjusted output voltage. The adjusted output voltage is stabilized or short circuit-proof. For operation of appliances with lower voltages at a 12 V or 24 V car battery or power supplies.Technical data: Max. 1.5 A Input: 6 - 28 V/DC Output: 3 - 15 V/DC

The LCD remote display (MPN 1-01-011205) for the Offgridtec MPPT Pro Duo solar charge controller enables a convenient readout of important key performance figures of the solar system and also the setting of some important system parameters. The display is supplied together with a mounting frame for wall mounting. Features of the Offgridtec Remote Meter Real-time display of operating data and operating Status Available real-time data: solar power (W), solar voltage (V), energy yield (Wh), battery voltage (V), battery charging current (A) Real-time display of error information of the connected unit Possibility to set the parameters battery type and temperature directly via the remote Display Data display in graphic form via large-surface Display Simple and intuitive operation via 3 touch buttons on the front of the display No external power supply necessary Easy mounting on wall or surface The remote display can be integrated into many environments in a visually appealing way. Screw the display together with the surface-mounted housing directly onto a wall or integrate the display directly into a surface using only the external bezel. However, the latter option requires that the surface has a suitable cut-out. Scope of delivery: 1x Offgridtec® display remote display for MPPT Pro Duo charge controller 1x 5m connection cable remote display to MPPT Pro Duo solar charge controller 1x mounting material for attaching the mounting frame 1x German operating manual

The WiFi Switch eu from myStrom allows you to be smarter with your electronic devices. Measure your power consumption and costs and let the WiFi Switch switch the existing devices on or off automatically. By timer, schedule or stand-by. With the myStrom app you have full control over your devices, even if you are not directly on site. The WiFi Switch eu is also compatible with Amazon Echo, Google Assistant and many more.1. Attach device2. open myStrom app3. ConnectTechnical data :max. power consumption: 16AOperating voltage: 120VMaterial: polyvinyl chlorideWeight: 120gDimensions: 87 x 150 x 87mmScope of delivery:1x myStrom WiFi Switch eu

The Votronic Info Panel Pro (MPN 5330) for 12V-systems is a comfortable monitoring and control panel and was designed especially for campers and caravans.It allows the most important control and switching tasks and provides direct monitoring of fresh and waste water tank as well as on-board and starter battery.Additionally it is equipped with main switches for battery and fresh water pump. On the left-hand side several LEDs display the current battery voltage within a range of 10.5V to 15.0V. Red LEDs show if battery voltage is too low. The integrated button allows to switch between on-board and starter batter or to deactivate the display. To monitor your tanks the Info Panel Pro comes with two more LED-displays wich show the current tank level steplessly thanks to varying brightness of the single LEDs.This allows full monitoring during all filling and emptying processes.By pushing a button the display can be activated or deactivated - the display deactivates automatically after 10 minutes. The right-hand display can be switched to a duo-measuring-input by default. The Info Panel Pro comes with protection from reverse polarity and overload.On its back you find labelled terminals for 6.3mm flat connectors (power supply connections) and pluggable terminal screws (signal connections). Detailed installation and operating manual, as well as a drilling jig are included in the standard delivery scope.Thanks to its small installation depth of 15mm this panel can be installed nearly everywhere.

Chases away martens by means of small high-voltage plates charged electrically to approx. 200 - 300 V/DC through electric shock in the engine compartment of the vehicle (only weak current pulses that chase the marten away, but do not kill it) and through strong, aggressively pulsating ultrasonic sounds. Extremely low power consumption (< 0.005 A), switches the battery voltage of < 11.5 V automatically off (does not discharge the battery completely if vehicles are being parked for quite some time).

The Wieland rst20/25 spacer ring is used for device connections to ensure unlocking by means of a screwdriver.Technical data:Color: BlackDimensions: 32 x 32 x 4,5 mmType: spacer ring for device connections M25Type: with manual overrideScope of delivery:1x Wieland rts20/25 spacer ring