The us3000c (mpn us3000c) is a lithium storage system of the latest generation. The accumulator was specially developed to fully meet the high demands placed on a solar accumulator today. Maximum safety and a long service life are guaranteed even with regular deep discharge thanks to the latest technology. The latest battery of the market-leading manufacturer with now 3.5 kWh per module has again a battery management system (bms) built into each module and therefore offers a lot of security. Internally, the individual cells are thus monitored and balanced against overvoltage, overtemperature, deep discharge, etc. protected. The battery is compatible and certified with many available inverters. Features Extremely cycle resistant - over 6000 cycles at 95% DoD More usable energy content than the previous model US3000 Lifetime over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging power possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function capable of reducing the current surge when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect ESS system from overvoltage function Battery management system in each module The battery management system integrated in each module protects each installed battery cell from harmful influences over the entire life of the module and effectively prevents premature failure. Protection against: Deep discharge and overcharge overvoltage during charging excessive currents during charging and discharging over and under temperature Short circuit and reverse polarity Constant monitoring of the individual cell voltages (cell balance) Modular design The system has a modular design and can be configured precisely to the desired storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) accumulator and an integrated BMS. High cycle life The extremely high cycle life of the installed LiFePo4 cells make Pylontech us3000c modules the optimal storage solution for photovoltaic systems. Regardless of whether the solar system is grid-connected or stand-alone, the Pylontech storage system offers several advantages over typical lead-acid batteries and other lithium technologies. Technical data Battery Type: Lithium Iron Phosphate (LiFePo4) Rated voltage: 48V Rated capacity: 3552 Wh Usable capacity (95% DoD): 3374 Wh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. Peak (discharge) charging current: 90A Max. (Discharge) charging current: 74A Recommended charge/discharge current: 37A Communication: rs485, CAN Weight: 32 kg Dimensions: 442 x 420 x 132 mm Protection class: IP20 Temperature range charge: 0°C - +50°C Temperature range discharge: -10°C - +50°C Temperature range storage: -20°C - +60°C Service life: over 10 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 years manufacturer warranty Certification: TÜV, ce, UN38.8 Due to the classification as dangerous goods, this product will be shipped by freight forwarding! Scope of delivery: 1x Pylontech us3000c LiFePO4 3.5 kWh 1x cable set parallel connection incl. grounding 1x rj45 data cable 1x mounting screws 1x user manual
From
€1,013.31*
From €851.52**
The us3000c (mpn us3000c) is a lithium storage system of the latest generation. The accumulator was specially developed to fully meet the high demands...
The Pytes e-box 48100r-c (mpn 110402100007) is a state-of-the-art LFP battery with 100 Ah capacity and is characterized by its high level of safety, sophisticated design and impressive performance. The battery is compact, easy to install, maintenance-free and can be used as the basic building block of an energy storage system by connecting it in parallel. Applications range from self-consumption coverage in private homes to small commercial and industrial energy storage systems, as well as in telecommunication stations.The Pytes E-BoxLatest generation LFP storageOver 6000 cycles at 90% DoDIntelligent energy managementIdeal for emergency power supplyExtensive compatibilityModularly expandableCAN and rs485 communicationIntelligent energy managementThe intelligent Pytes battery offers a comprehensive energy management system. Through real-time measurements, monitoring and management, it optimizes the system service life using intelligent algorithms. The battery thus ensures efficient and sustainable use of the available energy.Reliable emergency power supplyThe simple installation and user-friendly design make Pytes batteries a practical option for ensuring an uninterrupted power supply in your home. With their intelligent control features, Pytes batteries can optimize energy consumption and maximize battery life to ensure your backup power supply is efficient and reliable.Long service life and maximum safetyPytes batteries are characterized by their impressive service life and high level of safety. With over 6000 cycles at 90% depth of discharge (dod), they offer an exceptionally long service life. Whether it is a grid-connected solar system or a self-sufficient stand-alone system, the Pytes storage system offers several clear advantages over conventional lead batteries and other lithium technologies.Technical dataBattery chemistry: Lithium iron phosphate (LFP)Nominal voltage: 51.2 VVoltage range: 47.5-57.6 VNominal power: 100 AhNominal energy: 5.12 kWhMax. Charging current: 50 AMax. Discharge: 50 ACharging temperature: 0~50°CDischarging temperature: -10~50°CEfficiency: =95%Communication protocol: rs-232, rs-485, CANCycle life: >6000 cycles at 90% DoDDimensions: 440 x 620 x 117 mmWeight: 51 kgScope of delivery:1x Pytes E-Box 48100r-c
€1,307.81*
€1,099.00**
The Pytes e-box 48100r-c (mpn 110402100007) is a state-of-the-art LFP battery with 100 Ah capacity and is characterized by its high level of safety, s...
The Offgridtec MPPT Pro-Duo (MPN 1-01-011200) is an innovative high-end solar controller that was essentially designed for mobile applications. A variety of different board battery types can be charged via the primary charging output (BATT-1). The battery spectrum ranges from AGM, GEL and liquid lead acid to state-of-the-art LiFePO4 and Li-NiCoMn battery systems. The secondary battery charge output (BATT-2) is designed for a starter battery that is at the same voltage level as BATT-1. The unit automatically detects the system voltage of the starter battery (BATT-2) and charging of the BATT-2 begins as soon as the preset conditions are met.
The controller uses the advanced MPPT control algorithm that minimises the maximum power point loss rate and loss time, quickly tracks the maximum power point (MPP) of the PV generator, and processes the maximum energy from the PV generator under all conditions. Energy utilisation in a PV system with MPPT controller is increased by 20 to 30% compared to the PWM charging method.
Features Highlights of the MPPT Pro DUO 30 A
Max Power-Point Tracking technology with ultra-fast tracking speed and a guaranteed tracking efficiency of at least 99.5%.
Advanced MPPT control algorithm to minimise MPP loss rate and minimise time loss.
Higher range of MPP operating voltage to improve PV module utilisation.
Possibility of limiting the charging power by user or automatic charging current (BATT-1).
Digital circuit control of adaptive three-stage charging mode to improve BATT-1 lifetime.
The product will enter power saving mode if no manual input has been made for a long time and charging conditions are not met (PV<5v).>
100% charge and discharge in the operating temperature range.
AES control signal for auto-refrigerator to avoid energy waste.
Standard Modbus protocol and RS485 communication port (5V/200mA).
Overview of the most important technical features
Maximum charging current: 30A at a battery voltage of 12V or 24V.
Optional remote display with mounting frame available.
Supports all major battery types.
Active temperature equalisation for optimal charging and ensuring long battery life.
Max. Solar power 390W at 12V system voltage and 780W at 24V system voltage.
100V max. PV input voltage
Grounding: Negative
Dimensions: 24.7cm x 16.5cm x 6.9cm (LxWxH)
Connection terminals Battery 1: 16mm² (AWG6) / Battery 2: 4mm² (AWG12)
Weight: 1,4KG
Diameter of mounting holes: 5mm
Energy consumption: 26mA at 12V / 15mA at 24V
Max. Efficiency: 98
Intelligent energy saver
If there is no manual operation for an extended period of time and charging conditions are not present, the MPPT-Pro Duo will switch to energy saving mode, reducing the unit's energy consumption to a minimum. This behaviour also reduces wear and tear on the unit, which is reflected in a significantly longer service life. The system parameters are displayed and set directly via the intuitive control panel on the controller or via the MT11 remote control (accessory).
System communication and protection functions
The refrigerator's AES control signal is built into the controller, which delivers excess solar power to the refrigerator to prevent energy waste. The protection class of the MPPT Duo is IP33. It resists splashing water and is dust-tight. Our MPPT Pro DUO has multiple protection functions, including battery overcharge protection, discharge protection and reverse polarity protection of PV and battery, which effectively ensure the safety, stability and service life of the solar system.
Scope of delivery:
1x Offgridtec 1-01-011200 MPPT DUO charge controller.
1x instruction manual
€111.84*
€93.98**
The Offgridtec MPPT Pro-Duo (MPN 1-01-011200) is an innovative high-end solar controller that was essentially designed for mobile applications. A vari...
The Multiplus-II 48/3000/35-32 gx is a high-end device combination from victron Energy (mpn pmp482306000) that combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and Powerassist functions to 50 a and the potential range of use to ess applications. The inverter module delivers a whopping 3000 w at non-linear load, or 2400 w at linear continuous load. the 48 v battery charger is also very well proportioned, with 35 a charging power, and is complemented by a 32 a transfer switch that allows lightning-fast switching between aC connections. Compared to the rest of the series, the gx variants have an integrated gx display with numerous other connection options. important features of the Multiplus-II 48/3000/35-32 gx integrated gx control unit with various communication ports PowerControl and Powerassist -increase of mains or generator performance built-in anti-islanding function and connection for external current sensor (optional) can be used as a backup device in grid-connected systems for power supply in case of grid failures can be used in various ess (Energy Storage System) applications best suited for professional seafaring, yachts, vehicles and land-based, off-grid applications vE.Bus interface for parallel and three-phase operation, remote monitoring and system integration virtually unlimited power through parallel and three-phase operation can be configured on-site or remotely using vEConfigure software* technical features 3000w power at non-linear load 2400 w continuous load and 6000 w peak power for 48 v battery voltage, 32 a transfer switch and 35 a battery charger output voltage: 230 vaC, frequency: 50 Hz max. efficiency is 95%, protection class IP22 always enough power thanks to PowerControl and Powerassist a maximum mains or generator current can be set on the Multiplus-II 48/3000/35-32 gx. The MultiPlus-II then takes into account other connected AC consumers and only uses the current that is "left over" to charge the battery. This prevents the generator or mains connection from being overloaded (PowerControl function). The Powerassist function adds a new dimension to the PowerControl principle. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus-II immediately compensates for insufficient generator, shore power or mains power with energy from the battery. if the load is reduced, i.e. if consumers are switched off, the energy that is then available again in sufficient quantities can be used to charge the batteries Solar power: alternating current even in the event of a power failure The device can be used with both non-grid-connected and grid-connected pv systems, as well as with other alternative energy systems. It can be used with both solar charge controllers and grid-connected inverters. maximum flexibility thanks to two AC outputs The main output ensures uninterrupted operation. In the event of a grid failure or interruption of the shore/generator power, the MultiPlus-II takes over the supply of the connected consumers. Switching occurs so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic equipment is guaranteed. The second output supplies power only when AC power is available at the input of the MultiPlus-II. consumers that must not discharge the battery, such as a water heater, can be connected to this output. Scope of the integrated gx device A vE.Can interface This can be used to connect vE.Can devices from victron (e.g. vE.Can mppt). The port can also be reconfigured via the remote console for use with a compatible CaN bus Li-Ion battery. 1xUSB connection 1x Ethernet port 1x vE.Direct connection many possibilities for system expansion Settings can be changed within minutes using the vEConfigure software (requires a computer or laptop and MK3 USB interface).multiple monitoring and control options are available: Color Control gx, venus gx, Octo gx, CaNvu gx, laptop, computer, Bluetooth (with the optional vE.Bus Smart Dongle), battery monitor, Digital Multi control panel Remote configuration and monitoring Install a Color Control gx or other gx products to connect to the Internet. Operating data can be stored and viewed free of charge on our vRM (victron Remote Management) website. If systems are connected to the Internet, they can be accessed remotely and settings can be changed. Scope of delivery: 1x victron pmp482306000 Multiplus-II 48/3000/35-32 gx 230 v 1x instruction manual
€800.10*
€672.35**
The Multiplus-II 48/3000/35-32 gx is a high-end device combination from victron Energy (mpn pmp482306000) that combines classic Multiplus components w...
The solar module 150w mono from Offgridtec (mpn 3-01-001255) works with monocrystalline solar cells with a high efficiency of >22,3% and is ideal for 12v systems thanks to its 20v operating voltage. In Offgridtec mono solar modules only cells of the highest quality grade are installed and guarantee a constant high quality and performance with maximum service life thanks to state-of-the-art manufacturing. Features of Offgridtec 150w 12v mono solar panel proven quality directly from Offgridtec manufactured according to the latest standards monocrystalline solar cells extremely resistant ESG glass makes the module usable even in the most adverse environmental conditions ideal for 12v systems on land or in mobile solar systems 2 bypass diodes - minimized power loss in shaded conditions The mono 150w 12v is one of over 40 proven solar panels from the Offgridtec portfolio and participates in Offgridtecs experience in manufacturing high quality 12v and 24v solar cells. The module can be used in very adverse operating conditions thanks to the extremely resistant solar glass. It can withstand heavy hail and storms or extreme cold and heat without any problems and thanks to the integrated bypass diodes, the module can continue to produce power even in shaded or low light conditions. The most important technical data at a glance Power (Pmax): 150w Working voltage (Vmp): 20 V Open circuit voltage (Voc): 24 V max. current (Imp): 7.5 A Short circuit current (Isc): 8.1 A max. system voltage: 1000 V permissible ambient temperature: -40°C - +85°C Dimensions: 1140 x 680 x 35 mm Weight: 12 kg Universally applicable Offgridtecs 150w 12v Mono is universally applicable for example in 12 Volt Solaranlagen on garden houses, allotments or for the power supply of lighting applications, self-sufficient systems of signal and surveillance technology and many more. But also in mobile systems such as in mobile home solar systems this panel makes a good figure. The connection cables are 80 cm long and equipped with MC4 connectors. Scope of delivery: Offgridtec 3-01-001255 150w mono 12v solar panel
€130.78*
€109.90**
The solar module 150w mono from Offgridtec (mpn 3-01-001255) works with monocrystalline solar cells with a high efficiency of >22,3% and is ideal f...
The fsp-2 195w 12v is the second largest and newest member of the Offgridtec fsp family and is also one of the most powerful foldable solar modules in the range. It has a 3-sided design and comes with a matching connection kit that allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged.
Performance that sets standards
The fsp-2 195w Ultra is equipped with American SPR back-contact cells from SunPower. The look of the cells is completely black, which also gives the fsp-2 195w a very modern, high-quality look. The SPR cells ensure a very high efficiency of the panel and set new standards in this power class in combination with the low weight and compact dimensions of the fsp-2 panel.
extensive application possibilities:
excellent usable in the camping area
or for expeditions, climbing tours and much more...
for vehicles and boats without fixed solar installation ...
and numerous other applications in different areas...
technical highlights fsp-2 195w ultra foldable solar panel
Rated power: 195wp
Number of sides: 3 x 65 Wp
Module voltage (Vmp): 33,5 V
Max. Charge current (Imp): 5,82 A
Open circuit voltage (Voc): 39,4 V
Short circuit current (Isc): 6,17 A
Dimensions closed: 820 x 440 x 40 mm
Dimensions open designed: 820 x 1545 x 60 mm
Weight: 7,12 Kg
ETFE coating
SunPower high performance cells
6.0m 5mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side
0.5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller)
1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side
Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse
the included Profi-Connection Kit
The connection kit included in the scope of delivery offers everything needed for a quick start-up of the mobile solar set. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller.
For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal crocodile clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse.
customizable on request
All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred.
about the fsp-2 series
As with all Offgridtec solar module series, high quality has been emphasized in the fsp-2 series. The fsp-2 195w works with highly effective solar cells. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, the complete fsp-2 series is coated with ETFE coating, which provides better protection and at the same time ensures very high light transmittance. Furthermore, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions.
Scope of delivery
1x Offgridtec fsp-2 195w 12v, 3-01-012680
1x Offgridtec fsp-2 Connection-Kit
€403.23*
€338.85**
The fsp-2 195w 12v is the second largest and newest member of the Offgridtec fsp family and is also one of the most powerful foldable solar modules in...
Besides a 290ml cartridge this handy Dekalin adhesive-set also includes the Dekalin Dekavator, DEKACLEAN cloths and a sheet of very fine sandpaper for an ideal preparation of the surface.
Dekasyl MS-5 is a polymer-based adhesive with a high degree of adhesion and initial strength which is ideal for elastic connections of various components.Thanks to it's adhesive power the use of clamps is mostly unnecassary. The Dekasyl MS-5 also serves as sealent between similar materials or when mechanical connections are used.
Application:
Elastic connections and sealing for trains, caravans, trucks, cars,...
Glueing windows of buses, trains, caravans,...
Glueing of edge profiles (aluminium or polyester) of trailers
Glueing of polyester components with metal frame
Characteristics:
Free of solvents, isocyanate and PVC
Very UV- and age-resistant
Very high initial strength. Very high adhesion in general even without priming on various surfaces.
Constantly elastic within a temperature range of -40°C to +120°
Neutral, odorless and quick-setting
After skim-development paintable - normally this does not influence the setting-process
Compatible with most industrial painting systems, alkyd resin paint as well as dispersion paint (because of the many different types of industrial paints a material compatibility test is recommended)
We recommend to mount our spoilers and cable entries only with Dekasyl adhesive together with DEKAvator as this connection had the best outcome in a laboratory test.
Why Dekasyl?
Manufacturers of caravans like Fendt, Dethleffs, Burstner, Carthago, Pilote and Hymer use Dekalin-products in many different areas, for example as sealent for roofs, side panels, undercoating, glueing of PMMA-windows, sound-proofing, engine-covering, and many more.As a global partner of the caravan and camping industry Dekalin provides you with a wide range of latest technology and supports sellers in realizing their demands. They offer special solutions for sealing, glueing, damming and repairing.
Details:Glue color: blackDelivery scope: 1x cartridge 290ml Dekalin 6252412 Dekasyl MS-5 adhesive black, 1x sheet of sandpaper, 1x Dekalin Dekavator 6257812 bottle 30ml, DEKACLEAN cleaning cloths
Besides a 290ml cartridge this handy Dekalin adhesive-set also includes the Dekalin Dekavator, DEKACLEAN cloths and a sheet of very fine sandpaper for...
Dieses Set enthält alles was Sie brauchen um Module mit je max. 1m Breite auf einem Ziegeldach zu befestigen. Die enthaltenen Dach-Haken sind spezielle für Ziegeldächer konstruiert. Durch hochwertigste korrosionsfreie Materialien aus Edelstahl und Aluminium ist eine sichere und langlebige Montage gewährleistet.
Die Stücklisten der Befestigungskits sind für eine Montage der Module direkt nebeneinander konzipiert. Sollten Sie z.B. zwei Reihen untereinander mit je drei Solarmodulen planen benötigen Sie zwei Kits für je drei Module.
Beinhaltet:
Dachhaken 3-fach verstellbar (Edelstahl)
Solar-Profilschienen (Aluminium)
Endklemmen (Aluminium)
Nutensteine (Aluminium)
Endkappen
Alle notwendigen Schrauben und Muttern
Hinweis:
Nur für gerahmte Module mit 30mm/35mm Rahmenstärke
Module sind nicht im Lieferumfang enthalten
Variants from €106.95*
€255.45*
€214.66**
Dieses Set enthält alles was Sie brauchen um Module mit je max. 1m Breite auf einem Ziegeldach zu befestigen. Die enthaltenen Dach-Haken sind spe...
The Autark M-Master is the medium sized complete system of the Autark family and delivers an average daily yield of 800 watt hours between March and October. The generated power is stored in the cycle-proof 122Ah agm battery - the high-quality charge controller with integrated display gives you information about the charge status of the battery while your 230v consumers can be operated at the sine wave voltage converter. Of course, the whole thing is delivered including a professional connection cable kit - plug it together and get started. The system is suitable for a wide range of applications - from 12v lighting, charging laptop, cell phone and camera batteries and other small consumers, to 230v household appliances with a maximum continuous power of 1000w (15min)
Features of the Autark M-Master
If required, module side expandable by 2 x 100w with low installation effort
Average daily yield between March and October: approx. 800wh (approx. 66Ah)
Plug & Play ready-to-connect system - plug together and go
Allows operation of 12v and 230v loads, as well as 5v usb consumers
usb charging possibility directly at the charge controller (max. 2,4A)
Easy to read lcd display informs about all operating parameters
Flexible mounting possibility thanks to 8m connection cable from module to controller
Extensive electronic protection functions, such as overload protection, overtemperature protection, undervoltage shutdown, short-circuit protection, reverse polarity protection, etc.
rs485 communication port on the voltage transformer offers extensive configuration possibilities via pc (interface cable rs485 to usb included)
Charge controller enables temperature compensated charging - temperature sensor included in delivery
Configurable 12v load output at the charge controller for loads up to max. 30a - suitable e.g. for lighting control
Application areas
This complete system can be used in many ways. Whether as a stationary system on the mountain hut or in the allotment garden - the permanent operation of small coolers and refrigerators, as well as the charging of cell phones and laptops succeeds easily with this system. The installation on the motor home is also conceivable - we also have the corresponding brackets and adhesive sets for the attachment.
Extensive connection options
230v ac 50hz 1000w (15min - 1000w / permanent - 800w / short time (starting currents) - 1600w) Schuko socket on the sine wave voltage converter
12v consumer output with 30a power directly at the charge controller
2 x usb charging port at the charge controller with max. 2.4a (total)
1 x usb charging port at the voltage converter with max. 1a power
Parts list - what's inside
2 x Offgridtec 100w V2 Solarpanel 23V black frame
1 x Pair of solar connector compatible junction boxes for parallel connection of the two solar modules
1 x 30a pwm charge controller with clear lcd display and usb charging possibility - the device also has a 30a load output and is easy to operate - all important parameters can be read on the display
1 x 122Ah agm battery with m8 screw terminal Dimensions: 406 x 174 x 233 mm(+5mm terminal) - the battery is absolutely maintenance free and leak proof and lasts up to 10 years depending on use
1 x 1000w 12v to 230v sine wave voltage converter with a shockproof socket incl. connection cable - the rated power of 1000w can be output by the device for 15 minutes - beyond that the inverter outputs 800w and can handle short time starting currents up to 1600w
1 x 8m 6mm² professional connection cable solar module to charge controller with original Stäubli solar-connectors and high quality Lapp Ölflex 2x6mm² solar cable
1 x 1.5m 10mm² professional battery connection cable with MIDI fuse holder, 40a MIDI fuse and m8 ring terminals for connection between charge controller and battery
1 x Temperature sensor with 3m length for connection of the controller to the batrie
1 x 1m 25mm² connection cable from inverter to battery (included with the voltage converter)
1 x Fuse holder + 125A Mega fuse for installation between voltage transformer and battery positive pole for protection against short circuit
Roof mount for the solar module
Since there are different requirements for the mounting of a module and this varies greatly depending on the type of roof, the systems of the Autark series are not equipped with a roof mount as standard. This can of course be purchased additionally - find suitable suggestions here:
Solar module holder for flat roof or wall mounting
Mounting kit for pitched roof mounting on roof tiles (Frankfurter Pfanne etc.)
Mounting kit for pitched roof mounting on roofing felt, corrugated hernite and sheet metal roofs with wooden substructure
Fastening kit for pitched roof installation on Bieberschwanz tiles
Scope of delivery:
1x Solaranlage Autark M-Master with 2x100w solar panel, 30a pwm charge controller with lcd display and usb ports, 1000w sine wave voltage converter, 122Ah agm battery, user manuals
€741.44*
€623.06**
The Autark M-Master is the medium sized complete system of the Autark family and delivers an average daily yield of 800 watt hours between March and O...
Extremely versatile complete package The Offgridtec® HomePremium series is a true all-rounder at an unbeatable price-performance ratio. As well as being used as a usv backup solution with a choice between mains and battery priority, this PV system can also be used as a self-consumption system. There are virtually no limits to the performance of this Solarasystem - depending on personal requirements and on request, extensions are possible, both on the module and battery side. if a higher output power is required on the inverter, additional identical devices can also be connected here to increase performance. In addition to the power electronics, the storage system and the solar modules, all components required for the connection are also included in the scope of delivery, with the exception of the solar module holder, which must be ordered separately. all other components are plug and play - this means no annoying plug installation or the like - connect and you're done. Depending on your choice, the system is supplied with or without an electricity meter. Parts list - what's inside 30x Luxen Solar 430w Full Black Solar panel Luxneri Series 5 4 x 4.8kwh Pylontech us5000 LiFePo4 storage batteries 1x victron Energy mppt SmartSolar charge controller 450/200 48v 3x victron pmp482505010 Multiplus-II 48/5000/70-50a 1x Cerbo gx + 1x gx Touch 50 from victron Energy - the communication center of your system 1x victron Energy Lynx Distributor for dc distribution and protection 1x victron Energy Lynx Power In 3x 10m Offgridtec® Professional connection cable 6mm² solar module to charge controller for the connection between solar modules and charge controller 2 x Pylontechbattery connection cable set Pylontech to inverter 2 x 2.0m 25mm² amphenol to m8 1x 1m battery cable 50mm² m8 eyelets on both sides 3x 1m battery cable 35mm² m8 eyelets on both sides 3x 10m 6mm² mc-4 connection cable 1x vE.Can to CaN-Bus bms Type a cable 1.8m aSS030710018 for connecting the Cerbo gx to the memory 2x 3m victron rj45 utp cable for connecting the MultiPlus to the Cerbo gx 3x Mega fuse 125a / 70v 1x Mega fuse 250a / 70a 2x 0.9m victron rj45 utp cable 1x Pylontech Battery cabinet for us5000 When selecting electricity meter: 1x victron vm-3p75ct Energy Meter 1x victron 5m rj45 utp cable Extended use of your HomePremium system The HomePremium system is supplied either with or without victron electricity meter and cable, whereby an energy meter with connection cable is mandatory for the installation of an Energy Storage System. With this electricity meter, you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. thanks to phase compensation, you can even use the 3-phase meter for 1-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem. Luxen Solar 430w Full Black solar module The monocrystalline and bifacial 430w Full Black Series n5 solar module fromLuxen Solarsolar module impresses with a combination of different technologies, such as N-TOPCon cell technology and a 108 half-cell layout. The smbb half-cut cell technology was also used during production to increase performance. The state-of-the-art solar module represents the pinnacle of solar technology, offering impressive power output and low LCOE. Features Glass-glass module N-TOPCon cell technology smbb Half-Cut cell technology Low bos & LCOE Bifacial cell module technology excellent anti-PID and low lid performance 3 bypass diodes 30-year performance guarantee and 15-year product guarantee high cell efficiency of over 22% Half-cell technology In half-cell technology ("half-cut"), conventional silicon cells are cut in half using a laser. The resulting halves are then centrally connected in parallel, which leads to an increased output of the solar module by reducing resistance losses. Bifacial cells Bifacial means two-faced. And the name says it all: the Luxen Solar 430w n5 module is also equipped with solar cells on the back, which means that sunlight can be absorbed even better and the efficiency of the overall module is increased. Technical data maximum output: 430w Module voltage (vmp): 32.04v max. current (imp): 13.42a Open circuit voltage (voc): 38.96v Short-circuit current (Isc): 14.13a Module efficiency: 22.02% dimensions: 1722 x 1134 x 30 mm Operating temperature range: -40°C to +85°C Cells: 108 (6x18) max. operating voltage: 1500v dc Weight: 23,5kg LiFePo4 storage technology from Pylontech - proven, reliable, safe The us3000c storage battery from Pylontech is a latest-generation lithium iron phosphate battery that offers maximum safety and service life. Each module has a battery management system (bms) for comprehensive protection against deep discharge, overcharging and damage caused by high currents or extreme temperatures. Short circuits and reverse polarity are also excluded. Features of the Pylontech us3000c memory modules Extremely cycle-proof - over 6000 cycles at 95% DoD (discharge per cycle) absolutely intrinsically safe due to integrated protective shutdown (bms) High charging and discharging capacity of up to 5kw per module High storage density Low weight and compact design absolutely maintenance-free and easy to install 10-year guarantee The heart of the system - the victron MultiPlus-II 48/5000 The Multiplus-II 48/5000/70-50 from victron Energy combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and Powerassist functions to 100a and enables use in ESS applications. The setting options on the MultiPlus-II are extremely varied, as are its possible applications. We have already made the most important settings for you so that the system, as it is supplied, lives up to the description "Plug and Play" - the system can therefore be used immediately without any further configuration. Performance features and characteristics of the MultiPlus-II 48/5000 PowerControl and Powerassist - increasing mains or generator output Built-in anti-islanding function and connection option for external current sensor (optional) Can be used as a backup device in grid-connected systems vE.Bus interface for parallel and three-phase operation Remote monitoring and system integration Parallel and three-phase operation Approved according to vde-ar-n 4105 Technical data 5000 w power with non-linear load - 4000 w continuous load - 9000 w peak power For 48 v battery voltage, 50 a transfer switch and 70a battery charger output voltage: 230 vaC, frequency: 50 Hz Max. efficiency: 95% Protection class IP22 Maximum flexibility thanks to two AC outputs The MultiPlus-II offers uninterrupted operation by automatically taking over the supply to consumers in the event of mains failures or interruptions to the shore/generator power. The switchover takes place in less than 20 milliseconds to ensure continuous operation of electronic devices. A second output supplies power only when alternating current is present at the input of the MultiPlus-II. This makes it possible to connect consumers such as a water heater that should not be discharged from the battery. Configuration The MultiPlus-II is supplied unconfigured as standard. You can find the configuration instructions for the system here in the download area. If you would like us to pre-configure the system, we can do this for you for an additional charge. To do this, place the article linked above "Offgridtec pre-configuration" in the shopping cart during the ordering process. In this case, shipping may take 3-5 working days longer until the configuration has been completed. victron Energy Cerbo gx and gx Touch 50 - the communication center of your system The latest development in system monitoring from the company allows you to control and configure your system with ease. rounded off by the gxC Touch 50 - a waterproof 5 inch touchscreen - you always have an overview of your system parameters. The Cerbo's functions allow you to control and monitor your system perfectly and maximize system performance in an unprecedentedly simple way. victron Energy has developed a new system monitor that allows you to easily control and configure your system. The gx Touch 50, a waterproof 5-inch touchscreen, provides a clear overview of your system parameters. The Cerbo module allows you to precisely monitor your system and maximize performance. It is compatible with both solar charge controllers and grid-connected inverters. Mounting material and connection cable are included in the scope of delivery. The Bluetooth function of the gx Touch 50 makes accessing your system even quicker and easier. An optional wall bracket is available. victron Remote portal The victron Remote Portal (vRM) is a free victron Energy service that allows you to read out your system data remotely and configure the devices accordingly. This means that you always have full control and an overview of all relevant system parameters, even when you are away. The functionality is available online as a demo version and is ideal for getting a first impression - https://vrm.victronenergy.com/landingpage Safety note: Only have this complete system installed and commissioned by a qualified electrician.
Variants from €16,173.02*
€0.00*
€0.00**
Extremely versatile complete package The Offgridtec® HomePremium series is a true all-rounder at an unbeatable price-performance ratio. As well a...
With the Bluetti PowerOak eb70 power station, Bluetti presents one of the most powerful and at the same time most versatile mobile power stations in its range. With its numerous connection and charging options, this power station is a versatile all-rounder for use at home, in the vacation home or as a backup in the event of a power failure. With its 716Wh capacity and 1000w inverter, the eb70 Powerstation can power almost any device, such as kitchen appliances, lights, cell phones and laptops or tools. Features of Bluetti PowerOak eb70 Powerstation Capacity of 716Wh Perfect as a back-up solution in case of emergency For up to 10 consumers Use all connections at the same time Simultaneous charging and discharging possible Charging methods: AC outlet, 12V car adapter, solar panel Suitable for solar modules up to 200w fully charge via standard wall outlet in about 4 hours with integrated lamp Mobile energy supply made easy With multiple charging options, the eb70 Powerstation offers a high degree of flexibility and is quickly ready for use in a variety of situations. The two AC sockets provide a pure sine wave with 1000w total nominal power (peak power 1400w). via the LCD display, directly on the powerstation, the charge level, the remaining battery in percent, input and output power and other data can be displayed. Emergency power supply The Bluetti PowerOak eb70 powerstation is ideal for your emergency power needs. When you connect the powerstation to the mains via the AC input, all devices on the AC outputs are supplied with mains power. Charging times Power supply 4.1-4.6 hours 200w solar panel: 4.1-4.6 hours 12V car adapter: 7-8 hours 24V car adapter: 4.1-4.6 hours Generator: 4.1-4.6 hours Inputs and outputs: AC charging input (voltage & current): 200w Max, 12-28vac, 8a max. Car charging input: supports 12v/24v battery, 8a max. Solar charging input: 200w Max, 12-28vac, 8a max. AC output (2x): Pure sine wave, total 1000w (peak 1400w), 220-240v (50/60Hz) USB-A output (2x): 5vdc/3a total USB-C output (1x): 5/9/12/15/20vdc, 3a - 20vdc, 5a, 100w max. DC5521 output (2x): 12VDC/10A Wireless charging pad (1x): 15w max. Car charger output (1x): 12VDC/10A Supports up to 2 Bluetti expansion batteries (B230/B300) Technical data: Dimensions: 295.5 x 191 x 196 mm Weight: approx. 6.2kg Warranty: 24 months manufacturer warranty Capacity: 716Wh Cell chemistry: LifePO4 Charging temperature: 0°C - +40°C Operating temperature: 0-40°C Lifetime: 2500+ cycles (up to 80% capacity) Scope of delivery: Bluetti PowerOak eb70 power station Power supply unit Car charger cable Solar charging cable User manual
€458.15*
€385.00**
With the Bluetti PowerOak eb70 power station, Bluetti presents one of the most powerful and at the same time most versatile mobile power stations in i...
With the Bluetti ac200max Pro Powerstation (mpn 2-25-014715) Bluetti presents the most versatile portable powerstation from the Bluetti series. With its higher continuous load of 2200w and numerous connection and charging options, this portable power station is a versatile all-rounder for home, backup in case of power failure or for camping and outdoor adventures. With its 2048Wh capacity and 2200w inverter, the ac200max power station can power almost any device, such as kitchen appliances, lights, cell phones and laptops or tools. With the Bluetti b230 or the b300 expansion batteries, the capacity can even be tripled or quadrupled if needed. Features of the Bluetti ep500 Pro Powerstation Enormous capacity of 2.05kWh Perfect as a back-up solution in case of emergency Automatic change of supply mode in case of power failure For up to 15 consumers Use all connections simultaneously Simultaneous charging and discharging possible Charging methods: AC outlet, 12v car adapter, solar panel Suitable for solar modules up to 1400w Control and monitor the power station with the BLUETTI app Storage capacity modularly expandable Mobile energy supply made easy With its various charging options, the Bluetti ac200max power station offers a high degree of flexibility and is quickly ready for use in different situations. The three AC sockets provide a pure sine wave with 2200w total rated power (peak power 4800w). In addition to an integrated bms, the power station has numerous other protective features such as over-voltage and short-circuit protection. via the LCD display, directly on the powerstation, the charge status, the remaining battery in percent, input and output power as well as other data can be displayed. This data can also be displayed and controlled via the associated BLUETTI app. Emergency power supply The Bluetti ac200max Powerstation is ideal for your emergency power supply. If you connect the powerstation to the mains via the AC input, all devices at the AC outputs will be supplied with mains power. if the capacity is not enough, you can triple the capacity with 2x Bluetti b230 batteries (6,144Wh) or quadruple the capacity with 2x Bluetti b300 batteries (8,192Wh). Inputs and outputs: AC charging input: 220-240v (50Hz/60Hz). Car charging input: support 12v/24v battery, standard 8A USB-A fast charging (2x): 5-12vdc, 3a x 2, max 18w x 2 Solar charging input: 10-145v, max. 15a, max. 900W AC output (4x): 230v, 50Hz, 2200w (4400w peak) USB-A output (2x): 2x 5v - 3a USB-C output (1x): 5vDC - 3a, max. 100W DC5521 output (2x): 12v - 10A Car charger output (1x): 145w - 12v/DC - max. 10A Wireless charging with 2x 15w charging pads Supports up to 2 Bluetti expansion batteries (b230/b300) Technical data: Dimensions: 420 x 280 x 386.5 mm Weight: approx. 28.1 kg Warranty: 24 months manufacturer warranty Capacity: 2048Wh Cell chemistry: LiFePO4 Lifetime: 3500+ cycles to 80%+ capacity Charging temperature: 0°C - +40°C Discharge temperature: -20°C - +40°C Scope of delivery: Bluetti ac200max Expandable Power Station - eu Version T500 500w mains power adapter Solar charging cable (xt90 - mc4) up to 15a,900W 12v car charging cable Multifunctional Aviation Cable (xt90 - Avation) User manual
€1,188.81*
€999.00**
With the Bluetti ac200max Pro Powerstation (mpn 2-25-014715) Bluetti presents the most versatile portable powerstation from the Bluetti series. With i...
With the ac300 Bluetti presents the only version in the range of mobile power stations that only works in combination with at least one b300 battery module. With its numerous connection and charging options, this portable power station is a versatile all-rounder for home use, as a backup in case of power failure or for camping and outdoor adventures.
Features of the ac300 power station
Compatible with the b300 battery module (3072Wh)
Can be expanded by up to four modules
Capacity: 0 Wh (with b300: 3072-12288 Wh)
Perfect as a back-up solution in case of emergency
UPS system: automatic change of supply mode in case of power failure
Use all connections at the same time
Simultaneous charging and discharging possible (with b300 battery)
Suitable for solar modules up to 1200w
Control and monitor the power station with the Bluetti app
Mobile energy supply made easy
With multiple charging options, the Bluetti ac300 Powerstation offers a high degree of flexibility and can be quickly deployed in a variety of situations. The six AC outlets provide 3000w total rated power. The power station has numerous protection features such as over-voltage and short-circuit protection. the LCD display, located directly on the power station, can be used to display the charge level, remaining battery percentage, input and output power, and other data. This data can also be displayed and controlled via the associated Bluetti app.
Emergency power supply
The Bluetti ac300 in combination with the b300 expansion battery is ideal for your emergency power supply. When you connect the power station to the mains via the AC input, all devices on the AC outputs are supplied with mains power. Another detail of the Bluett power station is the integrated UPS system. This system ensures that your devices can continue to receive power even in the event of a power outage. If the power drops to an unstable level, this will be detected in the BMS system and the Power Station Combo will deliver enough power to everything that is currently connected.
Inputs and outputs:
AC Charge Input: Max. 3000w, 30a, 207-253VAC
Solar charging input (2x): 12v-150v, max 12A
AC output (6x): total 3600w (peak 7200w), 230v/16A
Max. Device power supported by X-Boost: 4500W
USB-A output (2x): 5vdc, 3a, 15w total
USB-A fast charging (2x): 3.6-12vdc, 3a, 18w total
USB-C output (1x): 5-15vdc, 3a, 20vdc, 5a, 100W
Wireless charging pad (2x): 5/7.5/10/15w
Car charger output (1x): 24vdc 10A
Supports up to 4 Bluetti ac300 batteries
Technical data:
Dimensions: 520 x 320 x 358 mm
Weight: approx. 21.6 kg
Warranty: 24 months manufacturer warranty
Scope of delivery:
1x Bluetti ac300 Power Station - eu version
1x 230v mains adapter
1x multifunctional DC charging cable
1x 12v car charging cable
1x user manual
€772.31*
€649.00**
With the ac300 Bluetti presents the only version in the range of mobile power stations that only works in combination with at least one b300 battery m...
With the Bluetti ac200max Pro Powerstation (mpn 2-25-014715) Bluetti presents the most versatile portable powerstation from the Bluetti series. With its higher continuous load of 2200w and numerous connection and charging options, this portable power station is a versatile all-rounder for home, backup in case of power failure or for camping and outdoor adventures. With its 2048Wh capacity and 2200w inverter, the ac200max power station can power almost any device, such as kitchen appliances, lights, cell phones and laptops or tools. With the Bluetti b230 or the b300 expansion batteries, the capacity can even be tripled or quadrupled if needed. Features of the Bluetti ep500 Pro Powerstation Enormous capacity of 2.05kWh Perfect as a back-up solution in case of emergency Automatic change of supply mode in case of power failure For up to 15 consumers Use all connections simultaneously Simultaneous charging and discharging possible Charging methods: AC outlet, 12v car adapter, solar panel Suitable for solar modules up to 1400w Control and monitor the power station with the BLUETTI app Storage capacity modularly expandable Mobile energy supply made easy With its various charging options, the Bluetti ac200max power station offers a high degree of flexibility and is quickly ready for use in different situations. The three AC sockets provide a pure sine wave with 2200w total rated power (peak power 4800w). In addition to an integrated bms, the power station has numerous other protective features such as over-voltage and short-circuit protection. via the LCD display, directly on the powerstation, the charge status, the remaining battery in percent, input and output power as well as other data can be displayed. This data can also be displayed and controlled via the associated BLUETTI app. Emergency power supply The Bluetti ac200max Powerstation is ideal for your emergency power supply. If you connect the powerstation to the mains via the AC input, all devices at the AC outputs will be supplied with mains power. if the capacity is not enough, you can triple the capacity with 2x Bluetti b230 batteries (6,144Wh) or quadruple the capacity with 2x Bluetti b300 batteries (8,192Wh). Inputs and outputs: AC charging input: 220-240v (50Hz/60Hz). Car charging input: support 12v/24v battery, standard 8A USB-A fast charging (2x): 5-12vdc, 3a x 2, max 18w x 2 Solar charging input: 10-145v, max. 15a, max. 900W AC output (4x): 230v, 50Hz, 2200w (4400w peak) USB-A output (2x): 2x 5v - 3a USB-C output (1x): 5vDC - 3a, max. 100W DC5521 output (2x): 12v - 10A Car charger output (1x): 145w - 12v/DC - max. 10A Wireless charging with 2x 15w charging pads Supports up to 2 Bluetti expansion batteries (b230/b300) Technical data: Dimensions: 420 x 280 x 386.5 mm Weight: approx. 28.1 kg Warranty: 24 months manufacturer warranty Capacity: 2048Wh Cell chemistry: LiFePO4 Lifetime: 3500+ cycles to 80%+ capacity Charging temperature: 0°C - +40°C Discharge temperature: -20°C - +40°C Scope of delivery: Bluetti ac200max Expandable Power Station - eu Version T500 500w mains power adapter Solar charging cable (xt90 - mc4) up to 15a,900W 12v car charging cable Multifunctional Aviation Cable (xt90 - Avation) User manual
€249.90*
€210.00**
With the Bluetti ac200max Pro Powerstation (mpn 2-25-014715) Bluetti presents the most versatile portable powerstation from the Bluetti series. With i...
With the b300 expansion battery from Bluetti you can expand the capacity of your Bluetti Powerstation by 3.1kWh. In total, you can add two extra smart batteries to the powerstations, doubling or even tripling your capacity. Actually, the b300 battery is designed as an extension for the ac300, ac200Max, ac200P, eb240, eb150, but it can also be used separately as long as you don't need 220 volts. Features of the Bluetti b300 battery Extension battery to your Bluetti powerstation Enormous capacity of 3.1kWh Perfect for expanding your back-up solution in case of emergency Charging Methods: AC outlet, 12V car adapter, solar panel Charging only possible in combination with the power station With LCD display to show remaining charge, remaining time, off and on Modular extension of your powerstation Double or triple the capacity of your Bluetti Powerstation and extend the runtime of your most important devices. Ideally suited for home use, backup during power outages, or for camping and outdoor adventures. In addition to the ac300, the b300 battery can also be connected to a Bluetti ac200 Max, eb240 or the eb150 powerstation. In this way, the battery capacity of the powerstation can be increased by up to 3072Wh. Technical data: Dimensions: 520 x 320 x 266 mm Weight: approx. 36.1kg 24 months manufacturer warranty Capacity: 3072 Wh Cell chemistry: LiFePO4 Lifetime: 3500+ cycles to 80% capacity/ 6000+ cycles to 50% capacity Scope of delivery: Bluetti b300 Expansion Battery Module Battery expansion cable (P090A) Solar charging cable 1x instruction manual
€1,432.76*
€1,204.00**
With the b300 expansion battery from Bluetti you can expand the capacity of your Bluetti Powerstation by 3.1kWh. In total, you can add two extra smart...
With the Bluetti ep500 Pro Powerstation (mpn 2-25-014710), Bluetti presents one of the most powerful and at the same time most versatile mobile power stations in its range. With its numerous connection and charging options, this power station is a versatile all-rounder for use at home, in the vacation home or as a backup in the event of a power failure.
The EP500 Pro Powerstation, with its capacity of 5100Wh, 3000W inverter and 15 socket ouputs can power almost any device such as kitchen appliances, lights, mobile phones, laptpos or tols.
Features of Bluetti ep500 Pro Powerstation
Enormous capacity of 5.1kWh
Perfect as a back-up solution in case of emergency
Mobility through wheels on the bottom
Automatic change of supply mode in case of power failure
For up to 13 consumers
Use all connections simultaneously
Simultaneous charging and discharging possible
Charging methods: AC outlet, 12V car adapter, solar panel
Suitable for solar modules up to 2400w
Control and monitor the power station with the BLUETTI app
charge completely in 2.5 hours via standard wall socket
Storage capacity modularly expandable
Mobile energy supply made easy
With its various charging options, the Bluetti ep500 Pro Powerstation offers a high degree of flexibility and is quickly ready for use in different situations. The three AC sockets provide a pure sine wave with 3000w total rated power (peak power 6000w). In addition to an integrated bms, the power station has numerous other protective features such as overvoltage and short-circuit protection. via the LCD display, directly on the powerstation, the charge status, the remaining battery in percent, input and output power as well as other data can be displayed. This data can also be displayed and controlled via the associated BLUETTI app.
Emergency power supply
The Bluetti ep500 Pro Powerstation is ideal for your emergency power supply. When you connect the powerstation to the mains via the AC input, all devices on the AC outputs are supplied with mains power. A unique detail of the ep500 Pro is the integrated UPS system. In the event of a sudden power failure with the UPS function enabled, the ep500 Pro automatically switches to battery-powered supply mode within 0ms. With the UPS function switched off, the switchover time is 20ms.
Inputs and outputs:
AC charge input (voltage & current): 207-253v (47-63 Hz) - 30A
Car charging input: supports 12v/24v battery, 8.2A
Solar charging input: 12-150vdc, 2x12A max, 2x12000W max
AC output (5x): Pure sine wave, total 3000w (peak 6000w), 220-240v (50/60Hz)
USB-A output (2x): 5vdc/3a total
USB-A fast charging (2x): 3.6-12VDC/36W
USB-C output (2x): 20vdc/5a; 5-15vdc/3a
DC5521 output (2x): 12VDC/10A
Wireless charging pad (2x): 5W/7.5W/10W/15W
Car charger output (1x): 12VDC/10A
RV connector (1x): 12VDC/30A
Supports wifi and Bluetooth
Supports up to 2 Bluetti extension batteries (b230/b300)
Technical data:
Dimensions: 500 x 300 x 760 mm
Weight: approx. 83 kg
Warranty: 24 months manufacturer warranty
Capacity: 5100Wh
Cell chemistry: LifePO4
Lifetime: 6000+ cycles
Charging temperature: 0°C - +40°C
Scope of delivery:
Bluetti ep500 Pro Power Station
Power supply
Solar connector
Instruction manual
€2,470.44*
€2,076.00**
With the Bluetti ep500 Pro Powerstation (mpn 2-25-014710), Bluetti presents one of the most powerful and at the same time most versatile mobile power ...
The pv350 solar panel from Bluetti is a foldable and portable 350w solar panel and the perfect complement to the Bluetti power stations The weight of only 13.9kg and the practical design make it the ideal companion for outdoor adventurers.
Wide range of applications:
excellent for use in camping, expeditions or climbing tours
for vehicles and boats without fixed solar installation
... and numerous other applications in a wide variety of areas
Technical data of the Bluetti pv350 solar module
Rated power: 350wp
Number of sides: 4 x 87.5Wp
Module voltage (Vmp): 37.5V
Max. Charge current (Imp): 9.2A
Open circuit voltage (Voc): 46.5V
Short circuit current (Isc): 10.8A
Dimensions closed: 905 x 613 x 65 mm
Dimensions open designed: 2400 x 905 mm
Ambient temperature: -10°C - +65°C
Cell efficiency: 23.4%
MC-4 connector with 2.7m cable length
Weight: 13.9 kg
ETFE coating
Scope of delivery
1x Bluetti pv350 solar panel
1x user manual
€415.31*
€349.00**
The pv350 solar panel from Bluetti is a foldable and portable 350w solar panel and the perfect complement to the Bluetti power stations The weight of ...
The pv200 solar panel from Bluetti is a foldable and portable 200w solar panel and the perfect complement to the Bluetti power stations The weight of only 7.3kg and the practical design make it the ideal companion for outdoor adventurers. Wide range of uses: excellent for use in camping, expeditions or climbing tours for vehicles and boats without fixed solar installation ... and numerous other applications in a wide variety of areas Technical data of the Bluetti pv200 solar module Rated power: 200wp Number of sides: 4 x 50wp Module voltage (Vmp): 20.5V Max. Charge current (Imp): 9.7A Open circuit voltage (Voc): 26.1V Short circuit current (Isc): 10.3A Dimensions closed: 590 x 600 mm Dimensions open designed: 590 x 2265 mm Ambient temperature: -10°C - +65°C Cell efficiency: 23.4% Weight: 7,3kg ETFE coating Scope of delivery 1x Bluetti pv200 solar panel 1x user manual
€279.53*
€234.90**
The pv200 solar panel from Bluetti is a foldable and portable 200w solar panel and the perfect complement to the Bluetti power stations The weight of ...
With the Bluetti b230 battery from EcoFlow, you can expand the capacity of your Bluetti ac200 Max Powerstation by 2.05kWh. In total, you can add two Extra Smart batteries to the Powerstations, doubling or even tripling your capacity. Features of the Bluetti b230 battery Expansion battery to your Bluetti ac200 Max powerstation Enormous capacity of 2.05kWh Perfect for expanding your back-up solution in case of emergency Charging Methods: AC outlet, 12V car adapter, solar panel Charging only possible in combination with the power station With LCD display to show remaining charge, remaining time, off and on Modular extension of your powerstation Double or triple the capacity of your Bluetti Powerstation and extend the runtime of your most important devices. Ideally suited for home use, backup during power outages, or for camping and outdoor adventures. In addition to the ac200 Max, the b230 battery can also be connected to a Bluetti ac200P, eb200 or the ep500 Pro Powerstation. In this way, the battery capacity of the powerstation can be increased by up to 2048Wh. With a t500 adapter (not included in the package) it is possible to charge the Bluetti Powerstation with the Bluetti ac200P, eb200 or ep500 Pro. Technical data: Dimensions: 420 x 280 x 227.5 mm Weight: approx. 21.6 kg 24 months manufacturer warranty Capacity: 2048Wh Cell chemistry: LiFePO4 Lifetime: 3500+ cycles to 80% capacity/ 6000+ cycles to 50% capacity Scope of delivery: Bluetti ac200MAX b230 Expansion Battery Module Battery expansion cable (P090A) 1x user manual
€888.93*
€747.00**
With the Bluetti b230 battery from EcoFlow, you can expand the capacity of your Bluetti ac200 Max Powerstation by 2.05kWh. In total, you can add two E...
With the b300 expansion battery from Bluetti you can expand the capacity of your Bluetti Powerstation by 3.1kWh. In total, you can add two extra smart batteries to the powerstations, doubling or even tripling your capacity. Actually, the b300 battery is designed as an extension for the ac300, ac200Max, ac200P, eb240, eb150, but it can also be used separately as long as you don't need 220 volts. Features of the Bluetti b300 battery Extension battery to your Bluetti powerstation Enormous capacity of 3.1kWh Perfect for expanding your back-up solution in case of emergency Charging Methods: AC outlet, 12V car adapter, solar panel Charging only possible in combination with the power station With LCD display to show remaining charge, remaining time, off and on Modular extension of your powerstation Double or triple the capacity of your Bluetti Powerstation and extend the runtime of your most important devices. Ideally suited for home use, backup during power outages, or for camping and outdoor adventures. In addition to the ac300, the b300 battery can also be connected to a Bluetti ac200 Max, eb240 or the eb150 powerstation. In this way, the battery capacity of the powerstation can be increased by up to 3072Wh. Technical data: Dimensions: 520 x 320 x 266 mm Weight: approx. 36.1kg 24 months manufacturer warranty Capacity: 3072 Wh Cell chemistry: LiFePO4 Lifetime: 3500+ cycles to 80% capacity/ 6000+ cycles to 50% capacity Scope of delivery: Bluetti b300 Expansion Battery Module Battery expansion cable (P090A) Solar charging cable 1x instruction manual
€1,403.01*
€1,179.00**
With the b300 expansion battery from Bluetti you can expand the capacity of your Bluetti Powerstation by 3.1kWh. In total, you can add two extra smart...
Mit der AC500 präsentiert Bluetti ein tragbares Kraftwerk, das nur in Kombination mit mindestens einem B300S oder B300 Batteriemodul funktioniert. Mit seinen zahlreichen Anschluss- und Auflademöglichkeiten ist dieses tragbare Kraftwerk ein vielseitig einsetzbarer Allrounder für zu Hause, als Backup bei Stromausfall oder für Camping- und Outdoor-Abenteuer.
Eigenschaften des AC500 Home Backup
Ausschließlich einsetzbar mit den B300S oder B300 Batteriemodulen (3072Wh)
Kann mit bis zu sechs Modulen kombiniert werden
Kapazität: 0 Wh (mit B300: 3072-18.432 Wh)
Perfekt als Back-up Lösung im Notfall
USV-System: Automatisches Wechseln des Versorgungsmodus bei Stromausfall
Alle Anschlüsse gleichzeitig nutzen
Gleichzeitiges Auf- und Entladen möglich (mit B300-Batterie)
Solareingang: 3.000W Max., VOC 12-150VDC, 12A
Mit der Bluetti-App die Powerstation steuern und überwachen
Mobile Energieversorgung leicht gemacht
Durch die verschiedenen Lademöglichkeiten bietet das Bluetti AC500 Home Backup ein hohes Maß an Flexibilität und ist in unterschiedlichen Situationen schnell einsatzbereit. Die sechs AC-Steckdosen liefern 5000W Gesamtnennleistung. Die Powerstation verfügt über zahlreiche Schutzfunktionen wie einen Überspannungs- und Kurzschlussschutz. Über das LCD-Display, direkt am Gerät, können der Ladezustand, der verbleibenden Akku in Prozent, Ein- und Ausgangsleistung sowie weitere Daten angezeigt werden. Diese Daten können ebenso über die zugehörige Bluetti-App angezeigt und gesteuert werden.
Notstromversorgung
Die Bluetti AC500 ist in Kombination mit dem B300S oder B300 Batteriemodul ideal für Ihre Notstromversorgung geeignet. Wenn Sie das AC500 über den AC-Eingang an das Stromnetz anschließen, werden alle Geräte an den AC-Ausgängen mit Netzstrom versorgt. Ein weiteres Detail des Bluett Power Stations ist das integrierte UPS-System. Dieses System stellt sicher, dass Ihre Geräte auch bei Stromausfall weiterhin mit Strom versorgt werden können. Wenn die Leistung auf einen instabilen Wert absinkt, wird dies im BMS-System erkannt und liefert die Power Station Combo genug Leistung an alles, was derzeit angeschlossen ist.
Technische Daten
Akku- Informationen:
Funktioniert mit B300s oder B300, beginnt bei 3072Wh
Ausgang:
AC-Steckdosen: 5x 230V/16A, 1x 230V/32A, insgesamt 5.000W
Wechselrichter Typ: Reiner Sinus
Stromspitzen 10.000W
USB-C-Anschluss: 2x100W Max.
USB-A-Anschluss: 2x 5V/3A USB-A, 2x 18W USB-A
12V* DC-Steckdosen: 1x 12V/30A (Wohnmobil-Ausgang), 1x 24V/10A (Auto Steckdose) *Alle reguliert.
Kabelloses Ladepad: 2x 15W Max. (für jede)
Eingabe:
AC-Eingang: 4.500W Max. (W/1*B300S), 5.000W Max.(W/2 oder mehr B300S)
Solar-Eingang: 3.000W Max.; VOC 12-150VDC, 12A
Auto-Eingang: 12/24V vom Zigarettenanzünderanschluss
Maximale Eingabe: 6.000W (W/1*B300S), 8.000W (W/2 oder mehr B300S) mit gleichzeitigem AC- und Solar-Eingang
Gewicht: ca. 21,6 kg
Garantie: 24 Monate Herstellergarantie
Allgemeines:
Erweiterbar mit bis zu sechs x B300S
Gleichzeitiges Aufladen und Entladen
App-Steuerung über Bluetti-App
Gewicht: 30kg
Abmessungen: 52 x 32,5 x 35,8 cm
Betriebstemperatur: -20 bis +40 Grad Celsius
Lagertremperatur: -20 bis +40 Grad Celsius
Zertifizierung: UL-Norm, CEC, DOE, FCC, CA Prop 65
Lieferumfang:
1x Bluetti AC500 Expandable Power Station - EU Version
1x 15A AC-Ladekabel
1x Solar-Ladekabel (MC4 an Flugzeugstecker)
1x Autoladekabel (MC4 an Zigarettenanzünder)
1x Bedienungsanleitung, sowie Certificate Card
€1,105.51*
€929.00**
Mit der AC500 präsentiert Bluetti ein tragbares Kraftwerk, das nur in Kombination mit mindestens einem B300S oder B300 Batteriemodul funktioniert...
Die AC60P Powerstation von Bluetti ist die ideale Lösung für alle, die eine zuverlässige, flexible und leicht zu tragende Energiequelle für den Außenbereich suchen, sei es beim Camping, Wandern oder für andere Outdoor-Aktivitäten. Die smarte Powerstation überzeugt mit einem robusten Gehäuse und 504 Wh Kapazität, gebündelt in einem langlebigen LiFePO4-Akku. Der einzigartige Aufbau schützt sie mit Schutzart IP65 vor Wasser und Staub, während das intelligente Batteriemanagementsystem, die effiziente MPPT-Steuerung sowie Powerlifting eine optimale Leistung ohne Ausfälle gewährleisten.
Leistungsstark und flexibel
Dank Turbo-Ladetechnik ist die AC60P bereits nach einer Stunde AC-Aufladung wieder voll aufgeladen und bereit für dein nächstes Abenteuer. Alternativ unterstützt die Powerstation auch das Laden mit Solarstrom, via Autobatterie oder Blei-Säure-Akku und ist dann bei max. 200 W in ca. 2,5 Stunden wieder zu 100% aufgeladen. Der integrierte 600 W Dual-Directional-Hybrid-Wechselrichter stellt durch Powerlifting-Technik bis zu 1200 W für Geräte mit ohmscher Last und hoher Wattleistung bereit, wie z.B. für deinen Haartrockner oder den Grill. Durch ihr modulares Design ist eine einzelne AC60P in der Lage, zwei B80P-Erweiterungsakkus mit je 806 Wh zu stapeln und erzielt dann eine Gesamtleistung von 2116 Wh. Dadurch steht dir auch für längere Abenteuer ausreichend Energie zur Verfügung.
Spitzenleistung durch Power-Lifting
Mit dem Power-Lifting-Modus ist die Powerstation in der Lage, vorübergehend hochbelastbare reine ohmsche Lasten mit einer Leistung von bis zu 1200 W zu bewältigen, während ihre Nennleistung von 600 W unverändert bleibt. Dies kann besonders nützlich sein, wenn du kurzzeitig Geräte betreiben möchtest, die eine höhere Leistung benötigen, wie beispielsweise Haushaltsgeräte oder Werkzeuge. Der Power-Lifting-Modus erweitert die Anwendungsmöglichkeiten der Powerstation, indem er temporär eine zusätzliche Leistungsreserve freigibt, während die grundlegende Nennleistung für den regulären Betrieb erhalten bleibt. Es ist jedoch zu beachten, dass der Power-Lifting-Modus nicht verfügbar ist, wenn die Powerstation gerade über eine AC-Quelle aufgeladen wird, da die AC-Quelle den Wechselrichter umgeht und die Stromversorgung direkt an die angeschlossenen AC-Lasten liefert.
Die AC60P Powerstation
hochwertiger 504 Wh Lithium-Eisenphosphat-Akku
ausgeklügeltes Batteriemanagementsystem (BMS)
hocheffiziente Ladegeschwindigkeit
Kapazität erweiterbar von 504 auf 2116 Wh
staubdicht und wasserabweisend nach IP 65
tragbar, robust und sicher
benutzerfreundliches LCD-Display
6 Jahre Garantie nach Registrierung
Klein, kompakt und anpassungsfähig
Mit nur 8,6 kg lässt sich die kompakte Powerstation im einzigartigen Mini-Design leicht überall hintragen und fügt sich, trotz ihres robusten Gehäuses aus Aluminiumlegierung, elegant in jedes Outdoor-Ambiente ein. Dank 7 integrierter Steckdosen können verschiedenste Geräte betrieben werden. Zusätzlich verfügt die AC60P über ein integriertes Ladepad, welches auch kabelloses Laden ermöglicht.
Umweltfreundlich, sicher und energieeffizient
Die AC60P Powerstation stellt durch die Möglichkeit über Solarenergie mit max. 200 W zu laden eine nachhaltige und energieeffiziente Energiequelle für deine Outdoor-Abenteuer dar. Der eingebaute 500Wh Lithium-Eisenphosphat-Akku gewährleistet nicht nur eine hohe Speicherkapazität, sondern auch elektrische Sicherheit und Zuverlässigkeit. Die LiFePO4-Technologie ist bekannt für ihre hohe Stabilität, geringe Selbstentladung und ihre Fähigkeit, auch unter anspruchsvollen Bedingungen optimale Leistung zu liefern.
Praktische Steuerung per App
Mit der praktischen Fernsteuerung über die Bluetti-App wird die Bedienung der Powerstation zum Kinderspiel. Alle Funktionen lassen sich bequem über dein Smartphone kontrollieren und überwachen. Von der Überprüfung des Batteriestatus bis hin zur Anpassung der Energieeinstellungen bietet die App eine intuitive und benutzerfreundliche Oberfläche. Die Möglichkeit, die Powerstation per Fernzugriff zu steuern, ermöglicht dir jederzeit, das Beste aus deinem Energieverbrauch herauszuholen und deine Stromversorgung optimal zu managen.
FAQs
Wie schnell lässt sich die Powerstation zu 100% aufladen? Dank der unterstützten Eingangsleistung von bis zu 600 W, kannst du die Powerstation in nur 1,2-1,7 Stunden komplett aufladen. Schließe sie dazu einfach an einer Steckdose an und aktiviere den Turbo-Lademodus in der Bluetti-App. Über 200 W Solar benötigt eine volle Aufladung der Powerstation ca. 2,5 Stunden bei optimaler Sonneneinstrahlung, idealer Ausrichtung und niedriger Temperatur.
Welche Solarmodule sind für die AC180 geeignet? Die Solarmodule sollten eine Gesamt-Leerlaufspannung von 12-28 V sowie eine maximale Eingangsleistung von 200 W haben und mit MC4-Anschlüssen ausgestattet sein.
Welche Geräte sind mit der Powerstation kompatibel? Berechne die Gesamtleistung deiner Geräte. Die AC60P sollte einwandfrei funktionieren, solange die Belastung 600 W nicht überschreitet. Beachte aber, dass Geräte mit eingebautem Kompressor/Motor oftmals bei Inbetriebnahme das 2- bis 4-fache der Nennleistung aufnehmen.
Was bietet der Power-Lifting-Modus? Im Power-Lifting-Modus kann die Bluetti AC60P Powerstation leistungsstarke Heizgeräte mit bis zu 1200 W betreiben, wie z.B. Raumheizungen, Haartrockner, elektrische Bügeleisen usw. Bitte beachte aber, dass das Gerät NICHT zur Verwendung mit einer Klimaanlage oder Waschmaschine geeignet ist.
Technische Daten
AC-Ausgang:
Leistung: 600 W gesamt
Spannung: 230 VAC
Strom: 2,6 A
Frequenz: 50/60 Hz
DC-Ausgang:
Zigarettenanzünderbuchse: 12 VDC/10 A
2x USB-A: 5 VDC/3 A gesamt
USB-C (Typ-C): 5/9/12/15/20 VDC, 3 A; 20 VDC, 5 A (eMarker-Chip integriert)
Kabelloses Laden: 5 W/7,5 W/10 W/15 W
AC-Eingang:
Spannung: 230 VAC
Maximalstrom: 5 A
Frequenz: 50/60 Hz
Leistung: max. 600 W (0-80 % in 45 Minuten bei 10-30 °C/50°F~86°F )
DC-Eingang:
Schnittstelle: DC7909
Leistung: 200 W/8 A max.
Spannung 12 V – 28 VDC
Erweiterungsanschluss ×2:
Nennspannung:22,4 VDC
max. Eingangsstrom:30 A
Allgemein:
Batteriekapazität: 504 Wh (18 Ah)
Typ: LiFePO4
Lebenszyklen: 3000+ Zyklen bis 80% der ursprünglichen Kapazität
Haltbarkeitsdauer: Alle 3-6 Monate auf 80% aufladen
Solar-Eingang: max. 200 W
Schutzklasse: IP65
Ladetemperatur: 0 bis 40 °C
Entladetemperatur: -20 bis 40 °C (-20°C~30°C: 600 W max.; 30°C~40°C:500 W max.)
Aufbewahrungstemperatur: -20 bis 40 °C
Luftfeuchtigkeit im Betrieb: 10%~90%
Abmessungen: 290 × 205 × 234 mm
Gewicht: 8,6 kg
Lieferumfang:
1× AC60P Powerstation
1× AC-Ladekabel (16 AWG, 1800 mm)
1× Autoladekabel (16 AWG, 720 mm)
1× Solarladekabel (16 AWG, 1500 mm)
1× Erdungsschraube (M4*12)
1× Sicherung
1× Benutzerhandbuch
€653.31*
€549.00**
Die AC60P Powerstation von Bluetti ist die ideale Lösung für alle, die eine zuverlässige, flexible und leicht zu tragende Energieq...
Die Bluetti AC180P Powerstation ist die Lösung für alle, die eine zuverlässige und leistungsstarke Energiequelle suchen, sei es für den Einsatz im Freien, bei Notfällen oder einfach für den täglichen Gebrauch. Ausgestattet mit einem reinen Sinus-Wechselrichter und einem hochwertigen 1440 Wh Lithium-Eisenphosphat-Akku bietet sie eine beeindruckende Kapazität und lange Lebensdauer. Die AC180P verfügt zudem über eine maximale Dauerleistung von 1800 W und einen Spitzenleistungsausgang von bis zu 2700 W im Power-Lifting-Modus. Damit kannst du auch anspruchsvolle Geräte und Werkzeuge betreiben, wenn keine Netzstromquelle verfügbar ist. Mit innovativer Technologie und einem beeindruckenden Leistungsspektrum gewährleistet die tragbare Powerstation eine unübertroffene Energieversorgung, um deine elektronischen Geräte überall mit Energie zu versorgen.
Highlights der Powerstation
hochwertiger 1440 Wh Lithium-Eisenphosphat-Akku
ausgeklügeltes Batteriemanagementsystem (BMS)
hocheffiziente Ladegeschwindigkeit
Spitzenleistungsausgang von bis zu 2700 W
maximale Dauerleistung von 1800 W
1440W Schnellladen
tragbar, robust und sicher
benutzerfreundliches LCD-Display
Intelligente App-Steuerung
5 Jahre Garantie
Turboladen in nur 45 Minuten
Die hocheffiziente Ladegeschwindigkeit ermöglicht es dir, den Akku in kürzester Zeit vollständig aufzuladen. Das Turboladen mit bis zu 1440-W-Eingangsstrom ermöglicht eine schnelle Aufladung von 0 bis 80 % in nur 45 Minuten. Die hocheffiziente Ladegeschwindigkeit in Kombination mit einer beeindruckenden Batteriekapazität von 1440 Wh und einem optimierten Standby-Stromverbrauch gewährleisten eine verlässliche Energieversorgung, die deinen Strombedarf den ganzen Tag über abdeckt.
Spitzenleistung durch Power-Lifting
Mit dem Power-Lifting-Modus ist die Powerstation in der Lage, vorübergehend hochbelastbare reine ohmsche Lasten mit einer Leistung von bis zu 2700 W zu bewältigen, während ihre Nennleistung von 1800 W unverändert bleibt. Dies kann besonders nützlich sein, wenn du kurzzeitig Geräte betreiben möchtest, die eine höhere Leistung benötigen, wie beispielsweise Haushaltsgeräte oder Werkzeuge. Der Power-Lifting-Modus erweitert die Anwendungsmöglichkeiten der Powerstation, indem er temporär eine zusätzliche Leistungsreserve freigibt, während die grundlegende Nennleistung für den regulären Betrieb erhalten bleibt. Es ist jedoch zu beachten, dass der Power-Lifting-Modus nicht verfügbar ist, wenn die Powerstation gerade über eine AC-Quelle aufgeladen wird, da die AC-Quelle den Wechselrichter umgeht und die Stromversorgung direkt an die angeschlossenen AC-Lasten liefert.
Flexibel, vielseitig und umweltbewusst
Neben der herkömmlichen Aufladung über die Steckdose, kannst du die AC180P natürlich auch über Solarenergie, dein Auto oder einen Generator aufladen. Besonders hervorzuheben ist der 500 W DC-Eingang. Dieser ermöglicht es dir bis zu 500 W umweltfreundlichen Solarstrom zu nutzen, wodurch du auch in abgelegenen Gebieten oder bei Outdoor-Abenteuern ausreichend Energie zur Verfügung hast und somit unabhängig bleibst. Der neue ECO-Modus mit automatischer Ein- und Ausschaltfunktion zum Energiesparen rundet das beeindruckende Leistungsspektrum ab.
Volle Kontrolle und Komfort
Das eingebaute LCD-Display informiert dich in Echtzeit über den aktuellen Akkustand, die Energieein- und -ausgänge sowie weitere wichtige Informationen. Dank intuitiver Bedienungsmöglichkeiten lässt sich die Powerstation außerdem mühelos steuern und überwachen. Mit der Bluetti-App hast du auch per Fernzugriff die volle Kontrolle über deine Powerstation und kannst sie bequem über das Smartphone bedienen. Praktische Funktionen wie das integrierte Ladepad für kabelloses Laden runden das leistungsstarke Gesamtpaket ab und ermöglichen es dir, deine Geräte stets sicher aufzuladen und effizient zu nutzen.
Tragbar und sicher
Trotz ihrer beeindruckenden Leistung ist die AC180P leicht und kompakt, was einen komfortablen Transport und die Verwendung im Freien ermöglicht. Das strapazierfähige Gehäuse schützt die Powerstation vor Stößen und Staub und gewährleistet eine zuverlässige Funktionalität unter verschiedensten Bedingungen. Zudem verfügt die Powerstation über ein ausgeklügeltes Batteriemanagementsystem (BMS), das Überstrom-, Überspannungs-, Unterspannungs-, Überlastungs- und Überhitzungsschutz bietet. Dank des Lithium-Eisenphosphat-Akkus ist die Powerstation nicht nur mit hoher Speicherkapazität ausgestattet, sondern zeichnet sich auch durch hervorragende elektrische Sicherheit und Zuverlässigkeit aus. Denn die LiFePO4-Technologie ist bekannt für ihre bemerkenswerte Stabilität, geringe Selbstentladung und optimale Leistung selbst unter anspruchsvollen Bedingungen.
Unterbrechungsfreie Stromversorgung
Mit ihrer 24/7 USV-Funktion kann die Powerstation im Falle eines Stromausfalls in nur 20 ms nahtlos auf Notstromversorgung umschalten und deine Geräte weiterhin zuverlässig mit Energie versorgen. Durch die kontinuierliche Energieversorgung kannst du nahezu ungestört weiterarbeiten bzw. deine elektronischen Geräte weiter nutzen. Die USV-Funktion macht die AC180P zu einem verlässlichen Begleiter in Situationen, in denen eine stabile Stromversorgung besonders wichtig ist, sei es bei dir zuhause, im Outdoor-Bereich oder anderen Anlässen.
FAQs
Was bietet der Power-Lifting-Modus? Im Power-Lifting-Modus kann die Bluetti AC180P Powerstation leistungsstarke Heizgeräte mit bis zu 2700 W betreiben, wie z.B. Raumheizungen, Haartrockner, elektrische Decken usw. Bitte beachte aber, dass das Gerät NICHT zur Verwendung mit einer Klimaanlage oder Waschmaschine geeignet ist.
Wie schnell lässt sich die Powerstation zu 100% aufladen? Dank der unterstützten Eingangsleistung von bis zu 1440 W, kannst du die Powerstation in nur 1,3-1,8 Stunden komplett aufladen. Schließe sie dazu einfach an einer Steckdose an und aktiviere den Turbo-Lademodus in der Bluetti-App. Über 500 W Solar benötigt eine volle Aufladung der Powerstation ca. 2,8-3,3 Stunden bei optimaler Sonneneinstrahlung, idealer Ausrichtung und niedriger Temperatur.
Welche Solarmodule sind für die AC180P geeignet? Die Solarmodule sollten eine Gesamt-Leerlaufspannung von 12-60 V sowie eine maximale Eingangsleistung von 500 W haben und mit MC4-Anschlüssen ausgestattet sein.
Welche Geräte sind mit der Powerstation kompatibel? Berechne die Gesamtleistung deiner Geräte. Die AC180P sollte einwandfrei funktionieren, solange die Belastung 1800 W nicht überschreitet.
Vielseitige Anschlussmöglichkeiten:
6 AC-Steckdosen
4x USB-A-Anschlüsse
2x USB-C-Anschlüsse
1x 12V/25A RV-Steckdose
1x 12V/10A Zigarettenanzünder-Steckdose
1x 12V/30A Solareingang
Technische Daten
AC-Ausgang:
Leistung: 1800 W gesamt
Spannung: 230 VAC
Strom: 7,8 A
Frequenz: 50/60 Hz
DC-Ausgang:
Zigarettenanzünderbuchse: 12 VDC/10 A
2x USB-A: 5 VDC/3 A 15 W gesamt
USB-C (Typ-C): 5/9/12/15/20 VDC, 3 A; 20 VDC, 5 A (integrierter eMarker-Chip)
Kabelloses Laden: 5 W/7,5 W/10 W/15 W
AC-Eingang:
Spannung: 230 VAC
Maximalstrom: 10 A
Frequenz: 50/60 Hz
USV: Umschaltzeit unter 20ms
Leistung: max. 1440 W bei 10-30°C/50°F~86°F
DC-Eingang:
Schnittstelle: DC7909
Leistung: max. 500 W/10 A
Spannung 12 V – 60 VDC
Allgemein:
Batteriekapazität: 1440 Wh (36 Ah)
Typ: LiFePO₄ mit über 3.500 Zyklen
Lebenszyklen: 3.500+ Zyklen bis 80% der ursprünglichen Kapazität
Ladetemperatur: 0 bis 40 °C
Entladetemperatur: -20 bis 40°C (30-40°C bei 1500W max.)
Aufbewahrungstemperatur: -20 bis 40 °C
Luftfeuchtigkeit im Betrieb: 10%~90%
Abmessungen: 340 × 247 × 317mm
Gewicht: 16 kg
Lieferumfang:
1× AC180P Powerstation
1× AC-Ladekabel (16 AWG, 1800 mm)
1× Autoladekabel (16 AWG, 720 mm)
1× Solarladekabel (16 AWG, 1500 mm)
1× Erdungsschraube (M5*10)
1× Benutzerhandbuch
€998.41*
€839.00**
Die Bluetti AC180P Powerstation ist die Lösung für alle, die eine zuverlässige und leistungsstarke Energiequelle suchen, sei es fü...
Der 1-phasige A80 600W Mikrowechselrichter von Bluetti ist mit seinem integrierten WiFi die ideale Plug&Play (MC4 Stecker) Lösung für dein Balkonkraftwerk. Der Inverter zeichnet sich vor allem durch seine 2 integrierten MPP-Tracker mit einer beeindruckender Effizienz von 99% aus. Er wandelt den erzeugten Gleichstrom (DC) in Wechselstrom (AC) um, wodurch der Strom nahtlos in dein Stromnetz eingespeist werden kann. Dadurch werden deine Verbraucher zuerst mit dem Solarstrom versorgt, bevor auf das öffentliche Netz zurück gegriffen wird. Das kompakte Leichtgewicht von 3,1kg eignet sich für die Solarstromproduktion mit bis zu zwei Solarpanelen mit einer maximalen Solarleistung von 1100W, welche durch MC4-Stecker angeschlossen werden.
Der Bluetti A80-600W Mikrowechselrichter
Hochwertige Energiegewinnung mit hoher MPPT-Genauigkeit
Optimale Systemzuverlässigkeit
Breite Modulverwendbarkeit mit Eingangsspannungen von 18-60V
0% Energieverschwendung möglich
Spitzenwirkungsgrad von 96,5%
Einfache Installation durch Plug&Play
Verbindungtypen : Bluetooth & Wi-Fi
wasser- und staubresistent
10-Jahre-Garantie
Das Bluetti Balkon Solar System - Reduziere deine Energierechnungen!
Hier kann der Mikrowechselrichter integriert werden. Das Balkon-Solar-System ist ein hocheffizientes netzgekoppeltes Energiespeichersystem, das aus einem Solarmodul Solarpanel, Solarladeregler, Mikro-Wechselrichter und Batterie besteht. Mit dem System kannst du durch die Speicherung der tagsüber erzeugten zusätzlichen Solarenergie (bis zu 4,3 kWh) und die Einspeisung in dein Haus für den nächtlichen Gebrauch jährlich ca. 435 € an Energiekosten einsparen, was bedeutet, dass sich dein System innerhalb von 5 Jahren selbst zahlen kann. Das System ist wasser- und staubresistent, dadurch wird dir eine hervorragende Leistung auf deinem Balkon gewährleistet.
Optimale Zuverlässigkeit
Mikro-Wechselrichtersysteme bieten von Natur aus eine höhere Zuverlässigkeit im Vergleich zu herkömmlichen Wechselrichtern. Durch ihre dezentrale Struktur gewährleisten sie, dass bei einer Störung nicht die gesamte Photovoltaik-Anlage ausfällt. Die Mikro-Wechselrichter sind speziell für die Installation im Freien konzipiert und erfüllen den Schutzstandard IP67, was bedeutet, dass sie gegen das Eindringen von Staub und Wasser geschützt sind.
Echtzeitüberwachung mit der Bluetti-App
Mit der Bluetti-App kannst du deine Energiespeichersysteme zu Hause jederzeit und von überall aus verwalten. Überwache deinen Energieverbrauch, die Solarstromdaten und den Batteriestatus und steuere sogar das Laden und Entladen.
Technische Daten
Nennleistung: 600W
Nennausgangsspannung: 230V
Max. Eingangsleistung: 1100W
MPPT Spannungsbereich: 18-60V
MPPT Wirkungsgrad: 99%
Abmessungen: 235 x 227 x 47 mm
Temperaturbereich: -40°C - +65°C
Gewicht: 3,1kg
Schutzart: IP67
Lieferumfang:
1x Bluetti 800W A80 Microinverter
1x AC-Kabel 1,8m
1x Verlängerungskabel MC4 3m - rot
1x Verlängerungskabel MC4 3m - schwarz
1x Montage-Tool für Wechselstromverbinder
€319.00*
€268.07**
Der 1-phasige A80 600W Mikrowechselrichter von Bluetti ist mit seinem integrierten WiFi die ideale Plug&Play (MC4 Stecker) Lösung für de...
The Bluetti Balcony solar system is a pioneering solution for environmentally conscious energy generation and storage. A central component of this system is the compact and powerful Bluetti b210 battery, which has an impressive capacity of 2150Wh. 4300Wh of capacity can be added by connecting two batteries. With usb-a, usb-c and 12V cigarette lighter outputs, the b210 is compatible with a wide range of devices, from laptops and smartphones to car fridges and camping heaters. about the Bluetti b210 battery Part of the Bluetti balcony solar system Enormous capacity of 2.1kWh Connection of two batteries in the system possible (4.3kWh) LiFePO4 technology 10-year manufacturer's warranty Protection class: IP65 about the Bluetti balcony solar system The bluetti balcony solar system is a highly efficient, grid-connected energy storage system consisting of a solar module, solar panel, solar charge controller, micro inverter and battery. It stores the additional solar energy generated during the day and supplies electricity during the night, reducing your energy costs at peak times and lowering your ecological footprint. With the Bluetti balcony solar system, you can save up to €750 a year in energy costs* monitoring with the bluetti app The bluetti app is an intuitive platform that allows you to monitor and control the d100s pv controller in real time. From your mobile device, you can not only check the current operating status, but also conveniently configure comprehensive network settings. In addition, the app provides detailed error reports and diagnostics that support fast and precise troubleshooting. With these features, you retain comprehensive control over your Bluetti balcony system to effortlessly manage the performance and reliability of your system. Technical specifications: General: Capacity: 2150Wh (42 Ah) Max. DC input power: 500W Cell chemistry: LiFePO4 Operating temperature: -20°C to 40°C Weight: approx. 27.9kg Noise emission: <45dB Battery scalability: 4300Wh with two b210 batteries Service life: 3000+ cycles up to 80% capacity DC Output: Cigarette lighter connection: 12VDC/10A USB-A: 78w Max (qc3.0: sv /3a; 9v /2a; 72v /7.SA) USB-C: 100w Max (pd3.0:5/9/72/75/20v3a,20v /sa., with built-in E-mark chip) DC Input: Interface: 2-pin Aviation Socket Max. Power: 500W Voltage: 11vdc to 60VDC Max. Current: 10A Battery extension connection (x2): Input voltage: 51.2V Max. Input current: 60A Scope of delivery: 1x Bluetti b210 battery 1x solar charging cable 1x battery extension cable 1x instruction manual *The amount depends on the regional guidelines. For more details, please contact your local facilities directly.
€1,599.00*
€1,343.70**
The Bluetti Balcony solar system is a pioneering solution for environmentally conscious energy generation and storage. A central component of this sys...
Das Bluetti 12V/30A RV Cable wird verwendet, um fahrzeugbetriebene Geräte auszustatten, die einen höheren Strom benötigen, ist 800mm lang und kompatibel mit der Bluetti AC200 Max Powerstation, sowie auch mit der Bluetti AC300 und der Bluetti EP500 Pro.
Lieferumfang:
1x Aviation Plug Cable to XT60 - F (für AC200Max)
1x XT60 - M to Anderson Plug Cable
€40.00*
Das Bluetti 12V/30A RV Cable wird verwendet, um fahrzeugbetriebene Geräte auszustatten, die einen höheren Strom benötigen, ist 800mm la...
Das Bluetti 12V/24V Ladekabel wird zur Verbindung mit kompatiblen Geräten verwendet, um diese mit einer Blei-Säure-Batterie zu laden.
Sie können damit folgende Geräte verbinden:
Bluetti AC200
Bluetti AC200P
Bluetti AC200Max
Bluetti EP500Pro
Bluetti AC300
Anschlusstyp XT90 - F auf Krokodilklemmen
Lieferumfang:
1x Bluetti 12V/24V Lead-acid Battery Charging Cable
€14.95*
0.5 Meter
(€29.90* / 1 Meter)
Content:
0.5 Meter
(€29.90* / 1 Meter)
Das Bluetti 12V/24V Ladekabel wird zur Verbindung mit kompatiblen Geräten verwendet, um diese mit einer Blei-Säure-Batterie zu laden.
Sie k...
Das Bluetti XT90 auf DC7909 Kabel wird zur Verbindung mit kompatiblen Bluetti Geräten verwendet, um diese mit einer Blei-Säure-Batterie zu laden.
Sie können damit folgende Geräte verbinden:
Bluetti AC200
Bluetti AC200P
Bluetti AC200Max
Funktioniert mit dem Bluetti T500 (500W) AC-Adapter für Dual-Adapter-Ladung.
Anschlusstyp XT90 - auf DC7909
Lieferumfang:
1x Bluetti XT90 auf DC7909 Kabel
€19.90*
0.2 Meter
(€99.50* / 1 Meter)
Content:
0.2 Meter
(€99.50* / 1 Meter)
Das Bluetti XT90 auf DC7909 Kabel wird zur Verbindung mit kompatiblen Bluetti Geräten verwendet, um diese mit einer Blei-Säure-Bat...
Die B80P Powerstation von Bluetti eignet sich mit einer Kapazität von 806 Wh nicht nur ideal als Erweiterungsbatterie für die Bluetti AC60P, sondern auch als unabhängiger Gleichstrom-Energiespeicher für kleinere Abenteuer. Ausgestattet mit einem zuverlässigen LiFePO4-Akku und robustem Gehäuse mit Schutzklasse IP65 sowie intelligentem Batteriemanagementsystem BMS und effizienter MPPT-Steuerung ist sie der ideale Begleiter für deinen nächsten Ausflug.
Kompatibel, aber auch unabhängig
Als Erweiterungsakku ist sie der perfekte Leistungsverstärker für die modulare Bluetti AC60P Powerstation. Auf 2 Erweiterungsbatterien gestapelt kannst du die Gesamtleistung der AC60P sogar auf stolze 2116 Wh erweitern. Mit dem passenden Zubehör lassen sich auch andere Powerstations von Bluetti (z.B. AC180/EB3A/EB55/EB70S) mit der B80P im Power Bank-Modus erweitern. Aber die Powerstation, ausgestattet mit 3 DC-Anschlüssen, ist mit 120 W Leistung auch als eigenständige Stromquelle äußerst vielseitig. Mit 806 Wh Energie kann sie bis zu 43-mal ein Smartphone und bis zu 10-mal einen Laptop aufladen sowie eine Lampe über 60 Stunden betreiben.
Der B80P Akku
hochwertiger 806 Wh Lithium-Eisenphosphat-Akku
ausgeklügeltes Batteriemanagementsystem (BMS)
eigenständig und erweiterbar (kompatibel mit AC60P)
LED-Anzeigen
staubdicht und wasserabweisend nach IP 65
tragbar, robust, sicher
branchenführende 6 Jahre Garantie nach Registrierung
Vielseitig und flexibel
Dank vielseitiger Stromeingänge kannst du den B80P überall aufladen. Die Aufladung ist in Verbindung mit der AC60P Powerstation oder individuell über Adapter, Solarmodul oder das Auto möglich. Somit bietet die B80P im Gegensatz zu Akkus anderer Mitbewerber eine herausragende Ladeflexibilität, um sicherzustellen, dass deine Akkus immer voll aufgeladen sind. Mit einem 100 W USB-C, einem 12 V/10 A Autoausgang und einem USB-A-Anschluss ist die B80P mit ihren drei DC-Anschlüssen ideal ausgestattet zum Aufladen von Smartphones, Laptops, Kameras, Ventilatoren, Lampen und vielem mehr. Die perfekte Begleitung für unterwegs als unabhängige Stromquelle in allen Situationen.
FAQs
Ist die B80P Powerstation wasserdicht? Nein, aber gemäß IP65 gegen Spritzwasser und Staub geschützt.
Wie lange benötigt die B80P alleinstehend für eine vollständige Aufladung? Durch die maximale Eingangsleistung von 200 W benötigt sie ca. 4,5 bis 5 Stunden.
Kann die Powerstation gleichzeitig laden und entladen? Ja
Kann die B80P über die Bluetti-App gesteuert werden? Dies ist nur in Kombination mit der Bluetti AC60P möglich.
Kann ich das Produkt mit Solarpaneelen anderer Hersteller laden? Ja, hierbei ist auf die Leerlaufspannung zwischen 12 und 28 Volt und MC4-Stecker zu achten.
Technische Daten
DC-Ausgang:
Zigarettenanzünderbuchse: 12VDC/10A
USB-A: 3,6-12VDC, 3A, 18W Max.
USB-C (Typ C): 5/9/12/15/20VDC, 3A; 20VDC, 5A (integrierter eMarker-Chip)
DC-Eingang:
Schnittstelle: DC7909
Leistung: 200W/8A Max.
Spannung: 12V-28VDC
Erweiterungsanschluss:
Nennspannung: 22,4VDC
max. Eingangsstrom: 30A
Powerbank-Ausgang: 25,2VDC, 200W Max.
Allgemein:
Batteriekapazität: 806Wh
Typ: LiFePO4 mit über 3000 Zyklen
Lebenszyklen: 3000+ Zyklen bis 80% der ursprünglichen Kapazität
Haltbarkeitsdauer: Alle 3-6 Monate auf 80% aufladen
Solar-Eingang: max. 200W
Schutzklasse: IP65
Ladetemperatur: 0 - +40°C
Entladetemperatur: -20°C - +40°C
Lagertemperatur: -20°C - +40°C
Luftfeuchtigkeit im Betrie 10%-90%
Gewicht: 9,9kg
Abmessungen: 290 x 207 x 204 mm
Lieferumfang:
1x B80P Powerstation
1x Batterieerweiterungskabel (800mm)
1x Benutzerhandbuch
€698.99*
€587.39**
Die B80P Powerstation von Bluetti eignet sich mit einer Kapazität von 806 Wh nicht nur ideal als Erweiterungsbatterie für die Bluetti AC60P,...
Der Bluetti D300S PV Step Down Module verringert die Spannung von starren Panels von 550V auf 120V und ist mit folgenden Modellen anwendbar:
AC300
EP500
EP500Pro
Technische Daten:
max. Ausgangsleistung: 3000W
max. Spannung: 135V
max. Eingangsspannung: 3000W
MPPT
Umgebungstemperatur: -10°C bis 40°C
Lagertemperatur: -20°C bis 40°C
Schutzart: IP54
Abmessungen: 350 x 216 x 120 mm
Gewicht: 7 kg
Lieferumfang:
1x Bluetti D300S PV Step Down Module
1x DC-Ausgangskabel
€698.99*
Der Bluetti D300S PV Step Down Module verringert die Spannung von starren Panels von 550V auf 120V und ist mit folgenden Modellen anwendbar:
AC300
...
Die BABC-210 Halterung von Bluetti ( MPN BABC-210) wurde speziell für die B210 LiFePO4 Batterie entwickelt. Die Brackets gewährleisten den Batterien einen stabilen Stand am Boden des Balkons oder der Terrasse. Mit dieser Halterung kannst du bis zu 2 Bluetti B210 Batterien übereinander platzieren. Durch ihr platzsparendes Design ist sie die ideale Lösung für deine Bluetti B210 Batterie.
Über die BABC-210 Halterung
kompatible Batterie-Technologie: LiFePO4
Befestigungsplatte Breite: 50cm
Art Befestigung: Schrauben
Farbe: schwarz
Anzahl Gelenke: 4 Stück
Gewicht: 2kg
Lieferumfang
1x Bluetti Halterung für B210 Batterie LiFePO4
€49.00*
Die BABC-210 Halterung von Bluetti ( MPN BABC-210) wurde speziell für die B210 LiFePO4 Batterie entwickelt. Die Brackets gewährleisten den B...
With 4 end clamps modules can be mounted on profile rails.
Features:
material: aluminuium
opening for M8 screws
frame height of 35mm
dimensions: 70 x 30 x 39mm
€1.27*
€1.07**
With 4 end clamps modules can be mounted on profile rails.
Features:
material: aluminuium
opening for M8 screws
frame height of 35mm
dimensions...
The bc01 Female from Betteri (mpn bc01B) is used for connection to a Envertech-, Hoymiles- or Huayu inverter. The opposite side can be connected to a h07rn-f rubber hose cable with a diameter of 10-14mm. It is a three-pole socket made of UV-resistant material. In addition, it is dustproof and waterproof according to protection class ip67, making it suitable for indoor and outdoor use. Product features Suitable for 1-phase inverters from e.g. Envertech, Hoymiles or Huayu Suitable for cables with a diameter of 10-14mm Dust and waterproof according to ip67 UV resistant - Suitable for indoor and outdoor installation Technical features Number of poles: 3-pole Material: plastic Operating temperature range: -40°C - +85°C Rated voltage: 230v AC Rated current: 25A Dimensions: 85.5 x 34.8 x 34.8 mm Weight: approx. 50g Scope of delivery: 1x Betteri bc01 female power plug
€5.34*
€4.49**
The bc01 Female from Betteri (mpn bc01B) is used for connection to a Envertech-, Hoymiles- or Huayu inverter. The opposite side can be connected to a ...
The end cap of Betterie (mpn bc01c) is used to close the unused 3 pole AC socket of the PV inverter of e.g. Envertech, Hoymiles or Huayu. Product features Suitable for 1-phase inverter from e.g. Envertech, Hoymiles or Huayu Closure of Betteri bc01 Female connector Dust and waterproof according to ip67 UV resistant - Suitable for indoor and outdoor mounting Scope of delivery: 1x Betteri Closure cap for bc01 socket
€3.56*
€2.99**
The end cap of Betterie (mpn bc01c) is used to close the unused 3 pole AC socket of the PV inverter of e.g. Envertech, Hoymiles or Huayu. Product f...
Dekasyl MS-5 is a polymer-based adhesive with a high degree of adhesion and initial strength which is ideal for elastic connections of various components.Thanks to it's adhesive power the use of clamps is mostly unnecassary. The Dekasyl MS-5 also serves as sealent between similar materials or when mechanical connections are used.
Application:
Elastic connections and sealing for trains, caravans, trucks, cars,...
Glueing windows of buses, trains, caravans,...
Glueing of edge profiles (aluminium or polyester) of trailers
Glueing of polyester components with metal frame
Characteristics:
Free of solvents, isocyanate and PVC
Very UV- and age-resistant
Very high initial strength. Very high adhesion in general even without priming on various surfaces.
Constantly elastic within a temperature range of -40°C to +120°
Neutral, odorless and quick-setting
After skim-development paintable - normally this does not influence the setting-process
Compatible with most industrial painting systems, alkyd resin paint as well as dispersion paint (because of the many different types of industrial paints a material compatibility test is recommended)
We recommend to mount our spoilers and cable entries only with Dekasyl adhesive together with DEKAvator as this connection had the best outcome in a laboratory test.
Why Dekasyl?
Manufacturers of caravans like Fendt, Dethleffs, Burstner, Carthago, Pilote and Hymer use Dekalin-products in many different areas, for example as sealent for roofs, side panels, undercoating, glueing of PMMA-windows, sound-proofing, engine-covering, and many more.As a global partner of the caravan and camping industry Dekalin provides you with a wide range of latest technology and supports sellers in realizing their demands. They offer special solutions for sealing, glueing, damming and repairing.
Details:Filling: 290mlMPN: 6252412Color: blackDelivery scope: 1 tube 290ml
Dekasyl MS-5 is a polymer-based adhesive with a high degree of adhesion and initial strength which is ideal for elastic connections of various compone...
Dekasyl MS-5 is a polymer-based adhesive with a high degree of adhesion and initial strength which is ideal for elastic connections of various components.Thanks to it's adhesive power the use of clamps is mostly unnecassary. The Dekasyl MS-5 also serves as sealent between similar materials or when mechanical connections are used.
Application:
Elastic connections and sealing for trains, caravans, trucks, cars,...
Glueing windows of buses, trains, caravans,...
Glueing of edge profiles (aluminium or polyester) of trailers
Glueing of polyester components with metal frame
Characteristics:
Free of solvents, isocyanate and PVC
Very UV- and age-resistant
Very high initial strength. Very high adhesion in general even without priming on various surfaces.
Constantly elastic within a temperature range of -40°C to +120°
Neutral, odorless and quick-setting
After skim-development paintable - normally this does not influence the setting-process
Compatible with most industrial painting systems, alkyd resin paint as well as dispersion paint (because of the many different types of industrial paints a material compatibility test is recommended)
We recommend to mount our spoilers and cable entries only with Dekasyl adhesive together with DEKAvator as this connection had the best outcome in a laboratory test.
Why Dekasyl?
Manufacturers of caravans like Fendt, Dethleffs, Burstner, Carthago, Pilote and Hymer use Dekalin-products in many different areas, for example as sealent for roofs, side panels, undercoating, glueing of PMMA-windows, sound-proofing, engine-covering, and many more.As a global partner of the caravan and camping industry Dekalin provides you with a wide range of latest technology and supports sellers in realizing their demands. They offer special solutions for sealing, glueing, damming and repairing.
Details:Filling: 290mlMPN: 6252212Color: whiteDelivery scope: 1 tube 290ml
Dekasyl MS-5 is a polymer-based adhesive with a high degree of adhesion and initial strength which is ideal for elastic connections of various compone...
Dekaseal 8936 from Dekalin is the classic sealant. The dab-on sealant impresses with high tightness, uv-resistance, as well as elasticity, since it does not harden and remains somewhat permanently tacky. Optimal for use in applications without visible joint edges (flaps, hatches, side windows, keder strips, exterior sockets, etc.). The simple processing convinces professionals and laymen alike. There is no need for additional cleaning work, as protruding rust can be easily removed by dabbing without leaving any residue. The sealant can be used without pretreatment on clean, dry, dust- and grease-free surfaces used in vehicle construction/caravaning. Dekaseal 8936 can be applied by hand or with the aid of a compressed air gun. Its strengths, apart from its high impermeability, are that it is easy to dismantle, i.e. it is well suited for connections that need to be undone at a later date. Applications Sealing of overlaps and joints in e.g. bus, caravan, motor home, train and truck construction Sealing of screw connections Sealing of sun roof systems Application under facing strips for installation of windows and skylights in caravans and motor homes, trailers and in container construction Suitable for application between metal plates, glass, gfk, wood and other materials Sealing rubber-glass joints in buses, cars, trains and trucks Properties Very low water vapor permeability (0.1 - 0.2 g/day/m²) excess Dekaseal 8936 can be easily removed after a few minutes Very good uv aging resistance, proven quality Resistant to water, road salt, weathering influences Sealant must be fixed between a mechanical joint Generally good adhesion to most substrates without pretreatment Long shelf life, unopened min. two years Cannot be overpainted Adhesion In general, Dekaseal 8936 adheres well without pretreatment to clean, dry, dust and grease free substrates of aluminum, stainless steel, zinc, copper, brass, powder coated metal, most painted metal surfaces, glass, pvc, polyester (grp), painted wood and other surfaces. No adhesion without pretreatment on polyethylene, polypropylene and Teflon®. For properties on substrates not mentioned and further information, please contact Dekalin. Processing Dekaseal 8936 can be applied by hand or with a compressed air gun. When using compressed air, 2 - 3 bar are required. The areas to be sealed must be solid, clean, dry and free of grease. Paint and smooth into joints, crevices, etc. excess material can be dabbed off with itself after a short flash-off time. The material can be removed with turpentine substitute. The sealant remains slightly tacky after drying, but is odorless and compatible with paint. Technical data Base material: polyisobutene, synthetic resins, fillers and solvents Specific gravity (20°C), din 51757: approx. 1.4 kg/liter Temperature resistance: -30°C - +100°C Application temperature: +5°C - +35°C Color: anthracite Packaging size: 310ml cartridge Scope of delivery: 1x Dekalin Dekaseal 8936 cartridge 310ml anthracite
Dekaseal 8936 from Dekalin is the classic sealant. The dab-on sealant impresses with high tightness, uv-resistance, as well as elasticity, since it do...
Self-drilling screws are used, for example, to connect supporting structures, sheet metal or façade cladding. The high-quality a2 stainless steel provides a high level of corrosion protection and durability, making the screw ideal for indoor and outdoor use.
€0.49*
Self-drilling screws are used, for example, to connect supporting structures, sheet metal or façade cladding. The high-quality a2 stainless steel prov...
The hm-350 from Hoymiles is the perfect micro inverter for your balcony power plant. The compact lightweight (only 1.98kg including the 1.35m AC cable) is suitable for solar power production with a solar panel up to 440 watts peak. Just like all other microinverters from Hoymiles, it is suitable for long operating hours and wide PV panel application because its startup is very low (only 22v) and the DC input range of the operating voltage (16-60V) is extremely wide.
Features
Minimize the effects of e.g. shading, dust or aging due to mppt
High-quality energy harvesting with high mppt accuracy
Optimal system reliability
Peak efficiency of 96.7%
12-year product warranty
High level of security thanks to integrated protection functions
Easy installation
Long service life
6000V surge protection
Complies with vde-ar-n 4105: 2018 and EN50549-1:2019
Optionally possible: Monitoring via S-Miles App or S-Miles Cloud
A DTU Lite is required for system monitoring.
To have the option of changing settings in addition to monitoring, a DTU Pro is required instead of the DTU Lite.
How it works
The Hoymiles microinverter converts the solar power generated by your photovoltaic system, AC grid compliant and feeds it directly into the utility grid. Each Hoymiles microinverter is individually connected to a PV module of your system for this purpose. This unique configuration means that each PV module is controlled by an individual maximum peak power point tracker (mppt). This ensures that the maximum available power from each individual module is fed into the utility grid, regardless of the output of the other PV modules in the system. Thus, if individual PV modules in the system are affected by shading, soiling, orientation, or mismatch, the hm-350 still ensures peak power for its associated PV module. The result is the maximum possible energy production from your PV system.
Optimal reliability
Microinverter systems are inherently more reliable than conventional inverters. The decentralized design of a microinverter system ensures that the entire PV system will not fail in the event of a malfunction. Hoymiles microinverters are designed to operate at full power in ambient temperatures up to +65°C (150°F). The microinverter enclosure is designed for outdoor installation and is IP67 rated.
Simple design
PV systems with Hoymiles microinverters are very easy to design and install. You can install a combination of PV modules of different types, in any orientation and in a desired number (Maximum number of devices in series: 14). You do not need to install cumbersome conventional inverters. Each microinverter can be quickly mounted on the PV mounting rack or directly under the PV module. The PV module is connected to the microinverter directly on site, eliminating the risk of exposing people to dangerously high DC voltage.
Technical data
Recommended module power: up to 440W
Peak power mppt of voltage range: 33~48V
Starting voltage: 22V
Battery voltage range: 16~60V
Maximum input voltage: 60V
Maximum input current: 11.5A
Maximum input short circuit current: 15A
Rated output power: 350VA
Rated output voltage: 1.52a at 230V
Rated output current: 230V
CEC weighted efficiency: 96.50%
Ambient temperature range: -40~+65°C
Dimensions (WxHxD): 182 x 164 x 29mm
Weight: 1.98kg (including 1.35m AC cable)
Enclosure rating: IP67
Scope of delivery
Hoymiles hm-350 micro inverter
€261.68*
€219.90**
The hm-350 from Hoymiles is the perfect micro inverter for your balcony power plant. The compact lightweight (only 1.98kg including the 1.35m AC cable...
The Hoymiles hms Field-Connector is an essential part of the Hoymiles hms PlugandPlay cable system, specifically designed for PV systems with a single microinverter.The Field-Connector connects directly to the inverter and provides an easy connection option to an AC cable. This straightforward plug-and-play design allows users to quickly and easily connect the single inverter system to the power grid.Connection to the power grid must only be done by an electrician.Hoymiles hms cable systemThe hms cable system is an innovative solution for wiring hms inverters in PV systems. It offers a user-friendly plug-and-play design that allows for easier, faster and more reliable installation. The flexible hms cable system allows users to combine cables of different sizes or lengths to cost-effectively implement the desired cabling configuration.ExamplesIn a system with one hms inverter:1x hms Connection cable PlugandPlay with field connector and Schuko plugor1x hms Field connector for own assembly of a cableFor a system with e.g. 2 hms inverters:1x hms Sealing Cap1x hms Connection Cable2x hms Trunk ConnectorOptional: - hms Extension Connector for extension of the cable - hms Disconnect Tool for disassembling the connectorTechnical DataRated voltage: 300VRated current: 12APower frequency and dielectric strength: 3000VACTemperature range: -40 to 85°CDimensions: 135 x 38 x 25mmProtection class: IP68for cables with outer diameter 8 - 9,5mmApplicable cables: 16/18 awg, 1.0/1.5mm² copper cableScope of delivery:1x Hoymiles hms Field Connector
€10.59*
€8.90**
The Hoymiles hms Field-Connector is an essential part of the Hoymiles hms PlugandPlay cable system, specifically designed for PV systems with a single...