The us3000c (mpn us3000c) is a lithium storage system of the latest generation. The accumulator was specially developed to fully meet the high demands placed on a solar accumulator today. Maximum safety and a long service life are guaranteed even with regular deep discharge thanks to the latest technology. The latest battery of the market-leading manufacturer with now 3.5 kWh per module has again a battery management system (bms) built into each module and therefore offers a lot of security. Internally, the individual cells are thus monitored and balanced against overvoltage, overtemperature, deep discharge, etc. protected. The battery is compatible and certified with many available inverters. Features Extremely cycle resistant - over 6000 cycles at 95% DoD More usable energy content than the previous model US3000 Lifetime over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging power possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function capable of reducing the current surge when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect ESS system from overvoltage function Battery management system in each module The battery management system integrated in each module protects each installed battery cell from harmful influences over the entire life of the module and effectively prevents premature failure. Protection against: Deep discharge and overcharge overvoltage during charging excessive currents during charging and discharging over and under temperature Short circuit and reverse polarity Constant monitoring of the individual cell voltages (cell balance) Modular design The system has a modular design and can be configured precisely to the desired storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) accumulator and an integrated BMS. High cycle life The extremely high cycle life of the installed LiFePo4 cells make Pylontech us3000c modules the optimal storage solution for photovoltaic systems. Regardless of whether the solar system is grid-connected or stand-alone, the Pylontech storage system offers several advantages over typical lead-acid batteries and other lithium technologies. Technical data Battery Type: Lithium Iron Phosphate (LiFePo4) Rated voltage: 48V Rated capacity: 3552 Wh Usable capacity (95% DoD): 3374 Wh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. Peak (discharge) charging current: 90A Max. (Discharge) charging current: 74A Recommended charge/discharge current: 37A Communication: rs485, CAN Weight: 32 kg Dimensions: 442 x 420 x 132 mm Protection class: IP20 Temperature range charge: 0°C - +50°C Temperature range discharge: -10°C - +50°C Temperature range storage: -20°C - +60°C Service life: over 10 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 years manufacturer warranty Certification: TÜV, ce, UN38.8 Due to the classification as dangerous goods, this product will be shipped by freight forwarding! Scope of delivery: 1x Pylontech us3000c LiFePO4 3.5 kWh 1x cable set parallel connection incl. grounding 1x rj45 data cable 1x mounting screws 1x user manual
From
€1,004.17*
From €843.84**
The us3000c (mpn us3000c) is a lithium storage system of the latest generation. The accumulator was specially developed to fully meet the high demands...
The Pytes e-box 48100r-c (mpn 110402100007) is a state-of-the-art LFP battery with 100 Ah capacity and is characterized by its high level of safety, sophisticated design and impressive performance. The battery is compact, easy to install, maintenance-free and can be used as the basic building block of an energy storage system by connecting it in parallel. Applications range from self-consumption coverage in private homes to small commercial and industrial energy storage systems, as well as in telecommunication stations.The Pytes E-BoxLatest generation LFP storageOver 6000 cycles at 90% DoDIntelligent energy managementIdeal for emergency power supplyExtensive compatibilityModularly expandableCAN and rs485 communicationIntelligent energy managementThe intelligent Pytes battery offers a comprehensive energy management system. Through real-time measurements, monitoring and management, it optimizes the system service life using intelligent algorithms. The battery thus ensures efficient and sustainable use of the available energy.Reliable emergency power supplyThe simple installation and user-friendly design make Pytes batteries a practical option for ensuring an uninterrupted power supply in your home. With their intelligent control features, Pytes batteries can optimize energy consumption and maximize battery life to ensure your backup power supply is efficient and reliable.Long service life and maximum safetyPytes batteries are characterized by their impressive service life and high level of safety. With over 6000 cycles at 90% depth of discharge (dod), they offer an exceptionally long service life. Whether it is a grid-connected solar system or a self-sufficient stand-alone system, the Pytes storage system offers several clear advantages over conventional lead batteries and other lithium technologies.Technical dataBattery chemistry: Lithium iron phosphate (LFP)Nominal voltage: 51.2 VVoltage range: 47.5-57.6 VNominal power: 100 AhNominal energy: 5.12 kWhMax. Charging current: 50 AMax. Discharge: 50 ACharging temperature: 0~50°CDischarging temperature: -10~50°CEfficiency: =95%Communication protocol: rs-232, rs-485, CANCycle life: >6000 cycles at 90% DoDDimensions: 440 x 620 x 117 mmWeight: 51 kgScope of delivery:1x Pytes E-Box 48100r-c
€1,307.81*
€1,099.00**
The Pytes e-box 48100r-c (mpn 110402100007) is a state-of-the-art LFP battery with 100 Ah capacity and is characterized by its high level of safety, s...
The Offgridtec MPPT Pro-Duo (MPN 1-01-011200) is an innovative high-end solar controller that was essentially designed for mobile applications. A variety of different board battery types can be charged via the primary charging output (BATT-1). The battery spectrum ranges from AGM, GEL and liquid lead acid to state-of-the-art LiFePO4 and Li-NiCoMn battery systems. The secondary battery charge output (BATT-2) is designed for a starter battery that is at the same voltage level as BATT-1. The unit automatically detects the system voltage of the starter battery (BATT-2) and charging of the BATT-2 begins as soon as the preset conditions are met.
The controller uses the advanced MPPT control algorithm that minimises the maximum power point loss rate and loss time, quickly tracks the maximum power point (MPP) of the PV generator, and processes the maximum energy from the PV generator under all conditions. Energy utilisation in a PV system with MPPT controller is increased by 20 to 30% compared to the PWM charging method.
Features Highlights of the MPPT Pro DUO 30 A
Max Power-Point Tracking technology with ultra-fast tracking speed and a guaranteed tracking efficiency of at least 99.5%.
Advanced MPPT control algorithm to minimise MPP loss rate and minimise time loss.
Higher range of MPP operating voltage to improve PV module utilisation.
Possibility of limiting the charging power by user or automatic charging current (BATT-1).
Digital circuit control of adaptive three-stage charging mode to improve BATT-1 lifetime.
The product will enter power saving mode if no manual input has been made for a long time and charging conditions are not met (PV<5v).>
100% charge and discharge in the operating temperature range.
AES control signal for auto-refrigerator to avoid energy waste.
Standard Modbus protocol and RS485 communication port (5V/200mA).
Overview of the most important technical features
Maximum charging current: 30A at a battery voltage of 12V or 24V.
Optional remote display with mounting frame available.
Supports all major battery types.
Active temperature equalisation for optimal charging and ensuring long battery life.
Max. Solar power 390W at 12V system voltage and 780W at 24V system voltage.
100V max. PV input voltage
Grounding: Negative
Dimensions: 24.7cm x 16.5cm x 6.9cm (LxWxH)
Connection terminals Battery 1: 16mm² (AWG6) / Battery 2: 4mm² (AWG12)
Weight: 1,4KG
Diameter of mounting holes: 5mm
Energy consumption: 26mA at 12V / 15mA at 24V
Max. Efficiency: 98
Intelligent energy saver
If there is no manual operation for an extended period of time and charging conditions are not present, the MPPT-Pro Duo will switch to energy saving mode, reducing the unit's energy consumption to a minimum. This behaviour also reduces wear and tear on the unit, which is reflected in a significantly longer service life. The system parameters are displayed and set directly via the intuitive control panel on the controller or via the MT11 remote control (accessory).
System communication and protection functions
The refrigerator's AES control signal is built into the controller, which delivers excess solar power to the refrigerator to prevent energy waste. The protection class of the MPPT Duo is IP33. It resists splashing water and is dust-tight. Our MPPT Pro DUO has multiple protection functions, including battery overcharge protection, discharge protection and reverse polarity protection of PV and battery, which effectively ensure the safety, stability and service life of the solar system.
Scope of delivery:
1x Offgridtec 1-01-011200 MPPT DUO charge controller.
1x instruction manual
€111.84*
€93.98**
The Offgridtec MPPT Pro-Duo (MPN 1-01-011200) is an innovative high-end solar controller that was essentially designed for mobile applications. A vari...
The Multiplus-II 48/3000/35-32 gx is a high-end device combination from victron Energy (mpn pmp482306000) that combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and Powerassist functions to 50 a and the potential range of use to ess applications. The inverter module delivers a whopping 3000 w at non-linear load, or 2400 w at linear continuous load. the 48 v battery charger is also very well proportioned, with 35 a charging power, and is complemented by a 32 a transfer switch that allows lightning-fast switching between aC connections. Compared to the rest of the series, the gx variants have an integrated gx display with numerous other connection options. important features of the Multiplus-II 48/3000/35-32 gx integrated gx control unit with various communication ports PowerControl and Powerassist -increase of mains or generator performance built-in anti-islanding function and connection for external current sensor (optional) can be used as a backup device in grid-connected systems for power supply in case of grid failures can be used in various ess (Energy Storage System) applications best suited for professional seafaring, yachts, vehicles and land-based, off-grid applications vE.Bus interface for parallel and three-phase operation, remote monitoring and system integration virtually unlimited power through parallel and three-phase operation can be configured on-site or remotely using vEConfigure software* technical features 3000w power at non-linear load 2400 w continuous load and 6000 w peak power for 48 v battery voltage, 32 a transfer switch and 35 a battery charger output voltage: 230 vaC, frequency: 50 Hz max. efficiency is 95%, protection class IP22 always enough power thanks to PowerControl and Powerassist a maximum mains or generator current can be set on the Multiplus-II 48/3000/35-32 gx. The MultiPlus-II then takes into account other connected AC consumers and only uses the current that is "left over" to charge the battery. This prevents the generator or mains connection from being overloaded (PowerControl function). The Powerassist function adds a new dimension to the PowerControl principle. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus-II immediately compensates for insufficient generator, shore power or mains power with energy from the battery. if the load is reduced, i.e. if consumers are switched off, the energy that is then available again in sufficient quantities can be used to charge the batteries Solar power: alternating current even in the event of a power failure The device can be used with both non-grid-connected and grid-connected pv systems, as well as with other alternative energy systems. It can be used with both solar charge controllers and grid-connected inverters. maximum flexibility thanks to two AC outputs The main output ensures uninterrupted operation. In the event of a grid failure or interruption of the shore/generator power, the MultiPlus-II takes over the supply of the connected consumers. Switching occurs so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic equipment is guaranteed. The second output supplies power only when AC power is available at the input of the MultiPlus-II. consumers that must not discharge the battery, such as a water heater, can be connected to this output. Scope of the integrated gx device A vE.Can interface This can be used to connect vE.Can devices from victron (e.g. vE.Can mppt). The port can also be reconfigured via the remote console for use with a compatible CaN bus Li-Ion battery. 1xUSB connection 1x Ethernet port 1x vE.Direct connection many possibilities for system expansion Settings can be changed within minutes using the vEConfigure software (requires a computer or laptop and MK3 USB interface).multiple monitoring and control options are available: Color Control gx, venus gx, Octo gx, CaNvu gx, laptop, computer, Bluetooth (with the optional vE.Bus Smart Dongle), battery monitor, Digital Multi control panel Remote configuration and monitoring Install a Color Control gx or other gx products to connect to the Internet. Operating data can be stored and viewed free of charge on our vRM (victron Remote Management) website. If systems are connected to the Internet, they can be accessed remotely and settings can be changed. Scope of delivery: 1x victron pmp482306000 Multiplus-II 48/3000/35-32 gx 230 v 1x instruction manual
€843.59*
€708.90**
The Multiplus-II 48/3000/35-32 gx is a high-end device combination from victron Energy (mpn pmp482306000) that combines classic Multiplus components w...
The solar module 150w mono from Offgridtec (mpn 3-01-001255) works with monocrystalline solar cells with a high efficiency of >22,3% and is ideal for 12v systems thanks to its 20v operating voltage. In Offgridtec mono solar modules only cells of the highest quality grade are installed and guarantee a constant high quality and performance with maximum service life thanks to state-of-the-art manufacturing. Features of Offgridtec 150w 12v mono solar panel proven quality directly from Offgridtec manufactured according to the latest standards monocrystalline solar cells extremely resistant ESG glass makes the module usable even in the most adverse environmental conditions ideal for 12v systems on land or in mobile solar systems 2 bypass diodes - minimized power loss in shaded conditions The mono 150w 12v is one of over 40 proven solar panels from the Offgridtec portfolio and participates in Offgridtecs experience in manufacturing high quality 12v and 24v solar cells. The module can be used in very adverse operating conditions thanks to the extremely resistant solar glass. It can withstand heavy hail and storms or extreme cold and heat without any problems and thanks to the integrated bypass diodes, the module can continue to produce power even in shaded or low light conditions. The most important technical data at a glance Power (Pmax): 150w Working voltage (Vmp): 20 V Open circuit voltage (Voc): 24 V max. current (Imp): 7.5 A Short circuit current (Isc): 8.1 A max. system voltage: 1000 V permissible ambient temperature: -40°C - +85°C Dimensions: 1140 x 680 x 35 mm Weight: 12 kg Universally applicable Offgridtecs 150w 12v Mono is universally applicable for example in 12 Volt Solaranlagen on garden houses, allotments or for the power supply of lighting applications, self-sufficient systems of signal and surveillance technology and many more. But also in mobile systems such as in mobile home solar systems this panel makes a good figure. The connection cables are 80 cm long and equipped with MC4 connectors. Scope of delivery: Offgridtec 3-01-001255 150w mono 12v solar panel
€130.78*
€109.90**
The solar module 150w mono from Offgridtec (mpn 3-01-001255) works with monocrystalline solar cells with a high efficiency of >22,3% and is ideal f...
The fsp-2 195w 12v is the second largest and newest member of the Offgridtec fsp family and is also one of the most powerful foldable solar modules in the range. It has a 3-sided design and comes with a matching connection kit that allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged.
Performance that sets standards
The fsp-2 195w Ultra is equipped with American SPR back-contact cells from SunPower. The look of the cells is completely black, which also gives the fsp-2 195w a very modern, high-quality look. The SPR cells ensure a very high efficiency of the panel and set new standards in this power class in combination with the low weight and compact dimensions of the fsp-2 panel.
extensive application possibilities:
excellent usable in the camping area
or for expeditions, climbing tours and much more...
for vehicles and boats without fixed solar installation ...
and numerous other applications in different areas...
technical highlights fsp-2 195w ultra foldable solar panel
Rated power: 195wp
Number of sides: 3 x 65 Wp
Module voltage (Vmp): 33,5 V
Max. Charge current (Imp): 5,82 A
Open circuit voltage (Voc): 39,4 V
Short circuit current (Isc): 6,17 A
Dimensions closed: 820 x 440 x 40 mm
Dimensions open designed: 820 x 1545 x 60 mm
Weight: 7,12 Kg
ETFE coating
SunPower high performance cells
6.0m 5mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side
0.5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller)
1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side
Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse
the included Profi-Connection Kit
The connection kit included in the scope of delivery offers everything needed for a quick start-up of the mobile solar set. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller.
For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal crocodile clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse.
customizable on request
All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred.
about the fsp-2 series
As with all Offgridtec solar module series, high quality has been emphasized in the fsp-2 series. The fsp-2 195w works with highly effective solar cells. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, the complete fsp-2 series is coated with ETFE coating, which provides better protection and at the same time ensures very high light transmittance. Furthermore, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions.
Scope of delivery
1x Offgridtec fsp-2 195w 12v, 3-01-012680
1x Offgridtec fsp-2 Connection-Kit
€403.23*
€338.85**
The fsp-2 195w 12v is the second largest and newest member of the Offgridtec fsp family and is also one of the most powerful foldable solar modules in...
Besides a 290ml cartridge this handy Dekalin adhesive-set also includes the Dekalin Dekavator, DEKACLEAN cloths and a sheet of very fine sandpaper for an ideal preparation of the surface.
Dekasyl MS-5 is a polymer-based adhesive with a high degree of adhesion and initial strength which is ideal for elastic connections of various components.Thanks to it's adhesive power the use of clamps is mostly unnecassary. The Dekasyl MS-5 also serves as sealent between similar materials or when mechanical connections are used.
Application:
Elastic connections and sealing for trains, caravans, trucks, cars,...
Glueing windows of buses, trains, caravans,...
Glueing of edge profiles (aluminium or polyester) of trailers
Glueing of polyester components with metal frame
Characteristics:
Free of solvents, isocyanate and PVC
Very UV- and age-resistant
Very high initial strength. Very high adhesion in general even without priming on various surfaces.
Constantly elastic within a temperature range of -40°C to +120°
Neutral, odorless and quick-setting
After skim-development paintable - normally this does not influence the setting-process
Compatible with most industrial painting systems, alkyd resin paint as well as dispersion paint (because of the many different types of industrial paints a material compatibility test is recommended)
We recommend to mount our spoilers and cable entries only with Dekasyl adhesive together with DEKAvator as this connection had the best outcome in a laboratory test.
Why Dekasyl?
Manufacturers of caravans like Fendt, Dethleffs, Burstner, Carthago, Pilote and Hymer use Dekalin-products in many different areas, for example as sealent for roofs, side panels, undercoating, glueing of PMMA-windows, sound-proofing, engine-covering, and many more.As a global partner of the caravan and camping industry Dekalin provides you with a wide range of latest technology and supports sellers in realizing their demands. They offer special solutions for sealing, glueing, damming and repairing.
Details:Glue color: blackDelivery scope: 1x cartridge 290ml Dekalin 6252412 Dekasyl MS-5 adhesive black, 1x sheet of sandpaper, 1x Dekalin Dekavator 6257812 bottle 30ml, DEKACLEAN cleaning cloths
Besides a 290ml cartridge this handy Dekalin adhesive-set also includes the Dekalin Dekavator, DEKACLEAN cloths and a sheet of very fine sandpaper for...
Dieses Set enthält alles was Sie brauchen um Module mit je max. 1m Breite auf einem Ziegeldach zu befestigen. Die enthaltenen Dach-Haken sind spezielle für Ziegeldächer konstruiert. Durch hochwertigste korrosionsfreie Materialien aus Edelstahl und Aluminium ist eine sichere und langlebige Montage gewährleistet.
Die Stücklisten der Befestigungskits sind für eine Montage der Module direkt nebeneinander konzipiert. Sollten Sie z.B. zwei Reihen untereinander mit je drei Solarmodulen planen benötigen Sie zwei Kits für je drei Module.
Beinhaltet:
Dachhaken 3-fach verstellbar (Edelstahl)
Solar-Profilschienen (Aluminium)
Endklemmen (Aluminium)
Nutensteine (Aluminium)
Endkappen
Alle notwendigen Schrauben und Muttern
Hinweis:
Nur für gerahmte Module mit 30mm/35mm Rahmenstärke
Module sind nicht im Lieferumfang enthalten
Variants from €106.94*
€255.44*
€214.66**
Dieses Set enthält alles was Sie brauchen um Module mit je max. 1m Breite auf einem Ziegeldach zu befestigen. Die enthaltenen Dach-Haken sind spe...
The Autark M-Master is the medium sized complete system of the Autark family and delivers an average daily yield of 800 watt hours between March and October. The generated power is stored in the cycle-proof 122Ah agm battery - the high-quality charge controller with integrated display gives you information about the charge status of the battery while your 230v consumers can be operated at the sine wave voltage converter. Of course, the whole thing is delivered including a professional connection cable kit - plug it together and get started. The system is suitable for a wide range of applications - from 12v lighting, charging laptop, cell phone and camera batteries and other small consumers, to 230v household appliances with a maximum continuous power of 1000w (15min)
Features of the Autark M-Master
If required, module side expandable by 2 x 100w with low installation effort
Average daily yield between March and October: approx. 800wh (approx. 66Ah)
Plug & Play ready-to-connect system - plug together and go
Allows operation of 12v and 230v loads, as well as 5v usb consumers
usb charging possibility directly at the charge controller (max. 2,4A)
Easy to read lcd display informs about all operating parameters
Flexible mounting possibility thanks to 8m connection cable from module to controller
Extensive electronic protection functions, such as overload protection, overtemperature protection, undervoltage shutdown, short-circuit protection, reverse polarity protection, etc.
rs485 communication port on the voltage transformer offers extensive configuration possibilities via pc (interface cable rs485 to usb included)
Charge controller enables temperature compensated charging - temperature sensor included in delivery
Configurable 12v load output at the charge controller for loads up to max. 30a - suitable e.g. for lighting control
Application areas
This complete system can be used in many ways. Whether as a stationary system on the mountain hut or in the allotment garden - the permanent operation of small coolers and refrigerators, as well as the charging of cell phones and laptops succeeds easily with this system. The installation on the motor home is also conceivable - we also have the corresponding brackets and adhesive sets for the attachment.
Extensive connection options
230v ac 50hz 1000w (15min - 1000w / permanent - 800w / short time (starting currents) - 1600w) Schuko socket on the sine wave voltage converter
12v consumer output with 30a power directly at the charge controller
2 x usb charging port at the charge controller with max. 2.4a (total)
1 x usb charging port at the voltage converter with max. 1a power
Parts list - what's inside
2 x Offgridtec 100w V2 Solarpanel 23V black frame
1 x Pair of solar connector compatible junction boxes for parallel connection of the two solar modules
1 x 30a pwm charge controller with clear lcd display and usb charging possibility - the device also has a 30a load output and is easy to operate - all important parameters can be read on the display
1 x 122Ah agm battery with m8 screw terminal Dimensions: 406 x 174 x 233 mm(+5mm terminal) - the battery is absolutely maintenance free and leak proof and lasts up to 10 years depending on use
1 x 1000w 12v to 230v sine wave voltage converter with a shockproof socket incl. connection cable - the rated power of 1000w can be output by the device for 15 minutes - beyond that the inverter outputs 800w and can handle short time starting currents up to 1600w
1 x 8m 6mm² professional connection cable solar module to charge controller with original Stäubli solar-connectors and high quality Lapp Ölflex 2x6mm² solar cable
1 x 1.5m 10mm² professional battery connection cable with MIDI fuse holder, 40a MIDI fuse and m8 ring terminals for connection between charge controller and battery
1 x Temperature sensor with 3m length for connection of the controller to the batrie
1 x 1m 25mm² connection cable from inverter to battery (included with the voltage converter)
1 x Fuse holder + 125A Mega fuse for installation between voltage transformer and battery positive pole for protection against short circuit
Roof mount for the solar module
Since there are different requirements for the mounting of a module and this varies greatly depending on the type of roof, the systems of the Autark series are not equipped with a roof mount as standard. This can of course be purchased additionally - find suitable suggestions here:
Solar module holder for flat roof or wall mounting
Mounting kit for pitched roof mounting on roof tiles (Frankfurter Pfanne etc.)
Mounting kit for pitched roof mounting on roofing felt, corrugated hernite and sheet metal roofs with wooden substructure
Fastening kit for pitched roof installation on Bieberschwanz tiles
Scope of delivery:
1x Solaranlage Autark M-Master with 2x100w solar panel, 30a pwm charge controller with lcd display and usb ports, 1000w sine wave voltage converter, 122Ah agm battery, user manuals
€741.44*
€623.06**
The Autark M-Master is the medium sized complete system of the Autark family and delivers an average daily yield of 800 watt hours between March and O...
Extrem Vielseitiges Komplettpaket
Die Offgridtec® HomePremium Serie ist ein wahrer Alleskönner zu einem unschlagbaren Preis- Leistungsverhältnis. Neben der Verwendung als USV Backup Lösung mit der Auswahl zwischen Netz- und Batterievorrang, lässt sich dieses PV-System genauso gut als Eigenverbrauchsanlage verwenden. Der Leistungsfähigkeit dieser Solaranlage sind dabei kaum Grenzen gesetzt – je nach persönlichem Bedarf und auf Anfrage sind Erweiterungen, sowohl Modul- als auch akkuseitig möglich. Wird am Wechselrichter eine höhere Ausgangsleistung benötigt können hier ebenfalls weitere gleiche Geräte zur Leistungssteigerung hinzugeschalten werden.
Neben der Leistungselektronik, dem Speicher und den Solarmodulen gehören sämtliche für den Anschluss benötigten Komponenten ebenfalls zum Lieferumfang, mit Ausnahme der Solarmodulhalter, welche separat bestellt werden muss. Alle übrigen Komponenten sind Plug and Play – das bedeutet keine lästige Steckermontage oder dergleichen – anschließen und fertig. Je nach Auswahl wird das System mit oder ohne Stromzähler geliefert.
Teileliste – das ist drin
30x Luxen Solar 430W Full Black Solarmodul Luxneri Series 5
4 x 4,8kWh Pylontech US5000 LiFePo4 Speicherbatterien
1x Victron Energy MPPT SmartSolar Laderegler 450/200 48V
3x Victron PMP482505010 Multiplus-II 48/5000/70-50A
1x Cerbo GX + 1x GX Touch 50 von Victron Energy - die Kommunikationszentrale Ihres Systems
1x Victron Energy Lynx Distributor für DC Verteilung und Absicherung
1x Victron Energy Lynx Power In
3x 10m Offgridtec® Profi Verbindungskabel 6mm² Solarmodul zu Laderegler für die Verbindung zwischen Solarmodulen und Laderegler
2 x Pylontech Batterieanschlusskabelset Pylontech zu Wechselrichter 2 x 2,0m 25mm² Amphenol zu M8
1x 1m Batteriekabel 50mm² beidseitig M8 Ösen
3x 1m Batteriekabel 35mm² beidseitig M8 Ösen
3x 10m 6mm² MC-4 Verbindungskabel
1x VE.Can zu CAN-Bus BMS Type A Kabel 1.8m ASS030710018 für die Verbindung des Cerbo GX mit dem Speicher
2x 3m Victron RJ45 UTP Kabel zur Verbindung des MultiPlus mit dem Cerbo GX
3x Megasicherung 125A / 70V
1x Megasicherung 250A / 70A
2x 0,9m Victron RJ45 UTP Kabel
1x Pylontech Batterieschrank für US5000
Bei Auswahl Stromzähler:
1x Victron VM-3P75CT Energy Meter
1x Victron 5m RJ45 UTP Kabel
Erweiterte Nutzung deines HomePremium-Systems
Die Lieferung des HomePremium-Systems erfolgt wahlweise mit oder ohne Victron Stromzähler und Kabel, wobei für den Aufbau eines Energy Storage Systems jeweils zwingend ein Energiezähler mit Anschlusskabel erforderlich ist.
Mit diesem Stromzähler kannst du eine netzparallele Installation vornehmen und danach deinen Energieverbrauch überwachen, bzw. deine Energiekosten kontrollieren. Dank der Phasenkompensation könntest du sogar den 3-phasigen Zähler auch für 1-phasige Systeme nutzen. Damit sind nahtlose Integrationen von dezentralen Energiequellen und Verbrauchern in das bestehende Stromnetz kein Problem.
Luxen Solar 430W Full Black Solarmodul
Das monokristalline und bifaziale 430W Full Black Solarmodul der Series N5 von Luxen Solar überzeugt durch eine Kombination verschiedener Technologien, wie der N-TOPCon Zelltechnologie und einem 108er Halb-Zellen-Layout. Zur Leistungssteigerung wurde bei der Produktion außerdem die SMBB Half-Cut Zelltechnologie angewandt. Das hochmoderne Solarmodul repräsentiert die Spitze der Solartechnologie, indem es eine beeindruckende Leistungsausgabe und niedrige Stromgestehungskosten bietet.
Eigenschaften
Glas-Glas Modul
N-TOPCon Zelltechnologie
SMBB Half-Cut Zelltechnologie
Niedriger BOS & LCOE
Bifaziale Zellmodultechnologie
hervorragende Anti-PID und Low LID Leistung
3 Bypass-Dioden
30 Jahre Leistungsgarantie und 15 Jahre Produktgarantie
hoher Zellwirkungsgrad von über 22%
Halbzellen-Technologie
Bei der Halbzellen-Technologie ("Half-Cut") werden herkömmliche Siliziumzellen mittels eines Lasers halbiert. Die entstandenen Hälften werden danach zentral parallel geschaltet, was durch die Verringerung von Widerstandsverlusten zu einer erhöhten Leistung des Solarmoduls führt.
Bifaziale Zellen
Bifazial heißt übersetzt zweigesichtig. Und der Name ist Programm: Das Luxen Solar 430W N5 Modul ist auch auf der Rückseite mit Solarzellen ausgestattet, wodurch das Sonnenlicht noch besser aufgenommen werden kann und der Wirkungsgrad des Gesamtmoduls steigt.
Technische Daten
maximale Leistung: 430W
Modulspannung (Vmp): 32,04V
max. Strom (Imp): 13,42A
Leerlaufspannung (Voc): 38,96V
Kurzschlussstrom (Isc): 14,13A
Modulwirkungsgrad: 22,02%
Abmessungen: 1722 x 1134 x 30 mm
Betriebstemperaturbereich: -40°C bis +85°C
Zellen: 108 (6x18)
max. Betriebsspannung: 1500V DC
Gewicht: 23,5kg
LiFePo4 Speichertechnologie von Pylontech – bewährt, zuverlässig, sicher
Die US3000C Speicherbatterie von Pylontech ist eine Lithium-Eisenphosphat-Batterie der neuesten Generation, die maximale Sicherheit und Lebensdauer bietet. Jedes Modul verfügt über ein Batteriemanagementsystem (BMS) für umfassenden Schutz vor Tiefentladung, Überladung, sowie Beschädigungen durch hohe Ströme oder extreme Temperaturen. Kurzschlüsse und Verpolung sind ebenfalls ausgeschlossen.
Eigenschaften der Pylontech US3000C Speichermodule
Extrem Zyklenfest – über 6000 Zyklen bei 95% DoD (Entladung pro Zyklus)
Absolut eigensicher durch integrierte Schutzabschaltung (BMS)
Hohe Lade- und Entladeleistung von bis zu 5KW pro Modul
Hohe Speicherdichte
Geringes Eigengewicht und kompakte Bauweise
Absolut Wartungsfrei und einfach zu installieren
10 Jahre Garantie
Das Herzstück der Anlage – der Victron MultiPlus-II 48/5000
Der Multiplus-II 48/5000/70-50 von Victron Energy kombiniert klassische Multiplus-Komponenten mit einem externen Stromsensor und integrierter Anti-Islanding Funktion. Dies erweitert die Funktionen PowerControl und PowerAssist auf 100A und ermöglicht den Einsatz in ESS-Anwendungen.
Die Einstellungsmöglichkeiten am MultiPlus-II sind extrem vielfältig, ebenso wie seine Einsatzmöglichkeiten. Damit das System, so wie es geliefert wird der Bezeichnung "Plug and Play" gerecht wird, haben wir die notwendigsten Einstellungen bereits für Sie vorgenommen - das System ist somit ohne weitere Konfiguration sofort Einsatzfähig.
Leistungsmerkmale und Eigenschaften des MultiPlus-II 48/5000
PowerControl und PowerAssist – Steigerung von Netz-oder Generator-Leistung
Eingebaute Anti-Islanding-Funktion und Anschlussmöglichkeit für externen Stromsensor (optional)
Kann als Backupgerät in netzgekoppelten Anlagen eingesetzt werden
VE.Bus Schnittstelle für Parallel-und Drei-Phasen-Betrieb
Fernüberwachung und Systemintegration
Parallel-und Drei-Phasen-Betrieb
Zugelassen nach VDE-AR-N 4105
Technische Daten
5000 W Leistung bei nicht linearer Belastung - 4000 W Dauerbelastung - 9000 W Spitzenleistung
Für 48 V Batteriespannung, 50 A Transfer-Schalter und 70A Batterieladegerät
Ausgangsspannung: 230 VAC, Frequenz: 50 Hz
Max. Wirkungsgrad: 95%
Schutzklasse IP22
Maximale Flexibilität dank zweier Wechselstromausgänge
Der MultiPlus-II bietet unterbrechungsfreien Betrieb, indem er bei Netzausfällen oder Unterbrechungen des Land-/Generatorstroms automatisch die Versorgung der Verbraucher übernimmt. Die Umschaltung erfolgt in weniger als 20 Millisekunden, um einen kontinuierlichen Betrieb von elektronischen Geräten zu gewährleisten. Ein zweiter Ausgang liefert Strom nur bei vorhandenem Wechselstrom am Eingang des MultiPlus-II. Dies ermöglicht den Anschluss von Verbrauchern wie einem Wassererhitzer, die nicht von der Batterie entladen werden sollen.
Konfiguration
Die Auslieferung des MultiPlus-II erfolgt standardmäßig unkonfiguriert. Du findest hier im Downloadbereich die Konfigurations-Anleitung für das System. Solltest du eine Vorkonfiguration durch uns wünschen, können wir dies gern gegen Aufpreis für dich übernehmen. Hierzu legest du den oben verlinkten Artikel "Offgridtec Vorkonfiguration" beim Bestellvorgang in den Warenkorb. Der Versand kann in diesem Fall 3-5 Werktage länger in Anspruch nehmen, bis die Konfiguration durchgeführt wurde.
Victron Energy Cerbo GX und GX Touch 50 – die Kommunikationszentrale deines Systems
Die neueste Entwicklung in Sachen Systemüberwachung aus dem Hause ermöglicht Ihnen die spielend einfache Kontrolle und Konfiguration deines Systems. Abgerundet durch das GXC Touch 50 – ein wasserdichtes 5 Zoll Touchscreen – behalte stets die Übersicht über deine Anlagenparameter. Durch die Funktionen des Cerbo lässt sich das System einerseits perfekt kontrollieren und überwachen, auf der anderen Seite ermöglicht es die Maximierung der Systemleistung auf noch nie da gewesene, einfache Art und Weise.
Victron Energy hat eine neue Systemüberwachung entwickelt, die dir eine einfache Kontrolle und Konfiguration ermöglicht. Das GX Touch 50, ein wasserdichter 5-Zoll-Touchscreen, bietet eine klare Übersicht über deine Anlagenparameter. Mit dem Cerbo-Modul kannst du dein System präzise überwachen und die Leistung maximieren. Es ist sowohl mit Solar-Lade-Reglern als auch mit netzgebundenen Wechselrichtern kompatibel. Montagematerial und Verbindungskabel sind im Lieferumfang enthalten. Durch die Bluetooth-Funktion des GX Touch 50 ist der Zugriff auf dein System noch schneller und einfacher. Eine optionale Wandhalterung ist verfügbar.
Victron Remote Portal
Das Victron Remote Portal (VRM) ist ein kostenloser Victron Energy Service, welcher es ermöglicht die Daten deines Systems aus der Ferne auszulesen und die Geräte entsprechend zu konfigurieren. So hast du auch bei Abwesenheit immer die volle Kontroller und Übersicht über alle relevanten Systemparameter. Die Funktionalität ist als Demoversion online verfügbar und bestens geeignet um sich einen ersten Eindruck zu verschaffen - https://vrm.victronenergy.com/landingpage
Sicherheitshinweis: Lassen Sie dieses Komplettsystem nur von einer Elektrofachkraft installieren und in Betrieb nehmen.
Variants from €16,173.02*
€0.00*
€0.00**
Extrem Vielseitiges Komplettpaket
Die Offgridtec® HomePremium Serie ist ein wahrer Alleskönner zu einem unschlagbaren Preis- Leistungsv...
Automatically switches another load on when a machine, lamp etc., is turned on.
It can monitor 1-phase or 3-phase (where a single phase is sampled) machines.
On the output side, 1-phase devices (e.g. vacuum cleaner) are switched on automatically (or three-phase loads with an auxiliary relay, not included).
Maximum of 15 A each. Total output: 3600 W
€16.24*
Automatically switches another load on when a machine, lamp etc., is turned on.
It can monitor 1-phase or 3-phase (where a single phase is sampled) m...
When the 2 sensor connections of the module come into contact with water, the built-in relay switches on. This can be used to control sirens, other shutdown relays, etc.
€8.91*
When the 2 sensor connections of the module come into contact with water, the built-in relay switches on. This can be used to control sirens, other sh...
Chases away the marten through high-voltage plates (movable) charged electrically to approx. 200 - 300 V/DC through electric shock in the motor compartment of the vehicle (only weak current pulses that merely chase the marten away but do not kill it) and through strong, aggressively pulsating ultrasonic sounds. Extremely low current consumption (< 0.005 A), switches off automatically at a battery voltage of < 11.5 V/DC (does not discharge the battery if vehicles are being parked for quite some time). The basic device with the ultrasound radiation is splash-proof according to IP 65* and may be mounted directly at the vestibule opening of the marten in the car. Built-in brightly blinking LED.
€69.40*
Chases away the marten through high-voltage plates (movable) charged electrically to approx. 200 - 300 V/DC through electric shock in the motor compar...
This battery saver protects your car battery from total discharge by switching off consumers such as ice boxes, heaters, radios + television sets, etc. in time. It switches on again automatically after return of the normal voltage. The interrupting voltage is adjustable: approx. 10.4 - 13.3 V.
Important installation instructions, please note! Depending on the load the module heats up. The heat is dissipated from the aluminum plate at the bottom of the module. Under certain circumstances it must be mounted on a cooling surface according to installation instructions. It is important that the module is fixed with 4 M3 screws (or 2.9mm metal screws) on the cooling surface. This may be the back wall of a metal casing. The aluminum plate on the bottom of the module must not bend, do not use larger screws and do not drill larger holes. The screw heads must rest on the plate of the module, rather than on the plastic edge of the module! During assembly, the module should not be curled up (if the ground is not flat). The reason: on the inside of the aluminum base of the module the thin insulating layer are directly soldered on the electronic SMD components. When the aluminum floor of the module curls up, the joints and the module start loosen and the module is defective. Please ensure that the maximum specified temperature (as specified in the module's description) is not exceeded. Otherwise apply a larger cooling plate.
€16.56*
€13.92**
This battery saver protects your car battery from total discharge by switching off consumers such as ice boxes, heaters, radios + television sets, etc...
Chases away martens by means of small high-voltage plates charged electrically to approx. 200 - 300 V/DC through electric shock in the engine compartment of the vehicle (only weak current pulses that chase the marten away, but do not kill it) and through strong, aggressively pulsating ultrasonic sounds. Extremely low power consumption (< 0.005 A), switches the battery voltage of < 11.5 V automatically off (does not discharge the battery completely if vehicles are being parked for quite some time).
€44.26*
Chases away martens by means of small high-voltage plates charged electrically to approx. 200 - 300 V/DC through electric shock in the engine compartm...
This battery saver protects your car battery from total discharge by switching off consumers such as ice boxes, heaters, radios + television sets, etc. in time. It switches on again automatically after return of the normal voltage. The interrupting voltage is adjustable: approx. 10.4 - 13.3 V.
Important installation instructions, please note! Depending on the load the module heats up. The heat is dissipated from the aluminum plate at the bottom of the module. Under certain circumstances it must be mounted on a cooling surface according to installation instructions. It is important that the module is fixed with 4 M3 screws (or 2.9mm metal screws) on the cooling surface. This may be the back wall of a metal casing. The aluminum plate on the bottom of the module must not bend, do not use larger screws and do not drill larger holes. The screw heads must rest on the plate of the module, rather than on the plastic edge of the module! During assembly, the module should not be curled up (if the ground is not flat). The reason: on the inside of the aluminum base of the module the thin insulating layer are directly soldered on the electronic SMD components. When the aluminum floor of the module curls up, the joints and the module start loosen and the module is defective. Please ensure that the maximum specified temperature (as specified in the module's description) is not exceeded. Otherwise apply a larger cooling plate.
€30.75*
€25.84**
This battery saver protects your car battery from total discharge by switching off consumers such as ice boxes, heaters, radios + television sets, etc...
Allows the connection of mobile phones, navigators, PDAs, MP3-players, etc. to a bicycle dynamo. The charge controller has an USB-A jack. It is thus possible to use many charging cables of various devices. A charging cable with micro USB plug is enclosed. In addition this charge controller is especially powerful: input voltage up to max. 70 V (may occur with hub dynamos at very high speeds). Output: 5 V max. 800 mA (if your dynamo can produce this output, otherwise the current is lower: max. approx. 500 mA). Please note that you need a dynamo cable (not included) for a proper installation.
€29.95*
Allows the connection of mobile phones, navigators, PDAs, MP3-players, etc. to a bicycle dynamo. The charge controller has an USB-A jack. It is thus p...
The Kemo m094n Marten Stopper produces strong, pulsating ultrasonic sounds that are perceived by martens and other rodents as very annoying and can therefore scare these animals away. Four small ultrasonic speakers are included with this "marten stopper" to provide good distribution of the ultrasonic sounds. Application: For driving martens out of the engine compartment of cars and trucks, where these animals eat the cables and other plastic parts! Or also for storerooms, cellars and attics!Technical dataOperating voltage: 12-15 v/dcPower consumption: at 12 v/dc, <0,05AOperating display: via a light emitting diodeLoudspeaker output: only for piezo loudspeakers!Audio frequency: adjustable approx. 8-40 kHz (±20%)Volume: 120 db (±20%) with 1 speakerDimensions piezo loudspeaker: approx. Ø 30 mm x 13 mmModule dimensions: approx. 60 x 45 x 25 mm (without mounting straps)Assembly instructions:The ultrasonic module is connected according to the drawing. It can be operated with voltages from 12 v/dc to 15 v/dc DC (car or truck battery). Operation with a commercially available 12 v/dc plug-in power supply is also possible (current consumption at 12 v/dc <50mA). 1 to 5 piezo speakers can be connected. The cables to the speakers can be up to 50m long. Because ultrasonic sounds propagate in a very straight line, it is necessary to install one of the enclosed loudspeakers at each different location (so that there are no "shadows"). The speakers and the module should be installed protected from the weather (do not expose to direct moisture). When the module is put into operation, the built-in LED lights up. The frequency can be adjusted on the module with a small screwdriver. When the adjustment knob on the module is at about position 1, you will hear a high pitched tone. If the adjustment is now turned further to the right, the tone becomes higher and higher and then inaudible (ultrasound). Attention! The device must be protected with a fuse (approx. 0.2a). The fuse is not enclosed!¬¬Scope of delivery:1x Kemo m094n Marder-Stopper4x ultrasonic loudspeaker
€16.40*
The Kemo m094n Marten Stopper produces strong, pulsating ultrasonic sounds that are perceived by martens and other rodents as very annoying and can th...
Charge controller for 12V accumulators via solar cells up to max. 6A and 80Wp module performance
To connect battery and regulator a connection cable with a max. diameter of 1,5mm² should be used. Length should be as small as possible.
This module works as a switch which connects the accumulator to the solar cells when the accumulator is running low (<13,4V). If the accumulator is fully loaded (>14,4V) it gets disconnected from the cells.
Control displays: Control-LEDs for"Charging" and "Battery full"
€11.20*
€9.41**
Charge controller for 12V accumulators via solar cells up to max. 6A and 80Wp module performance
To connect battery and regulator a connection cable ...
The twilight switch switches on e.g. lamps at nightfall and off again at daybreak. (for weekend cottages, sailing yachts, caravans etc.) Distribution output: relay 1 x SWITCH OVER, max. 3 ampere.
The sensitivity of the luminous intensity may be changed by partially covering the sensor mechanically.
€9.78*
€13.68*(28.51% saved)
The twilight switch switches on e.g. lamps at nightfall and off again at daybreak. (for weekend cottages, sailing yachts, caravans etc.) Distribution ...
The input voltage must be at least 3 V higher than the adjusted output voltage. The adjusted output voltage is stabilized or short circuit-proof. For operation of appliances with lower voltages at a 12 V or 24 V car battery or power supplies.Technical data:
Max. 1.5 A
Input: 6 - 28 V/DC
Output: 3 - 15 V/DC
€9.00*
The input voltage must be at least 3 V higher than the adjusted output voltage. The adjusted output voltage is stabilized or short circuit-proof. For ...
The Kemo m202 lead battery activator / refresher works against the deposition of lead sulfate and thus increases the service life of the car battery. By very violent, very short current pulses lead sulfate is actively reduced or the deposit is prevented. With led display. The lead battery activator can be permanently connected directly in parallel to the 12v car battery.Circuit descriptionSulfate forms on the plates of lead acid batteries, especially in batteries that are little used or only operated seasonally (e.g. motorcycles with winter break). During self-discharge during idle time, crystalline sulfates slowly cover the lead plates and lead to a reduction in the capacity of the lead-acid battery. The Lead-Acid Activator is simply connected in parallel with the battery and uses very short, very violent current pulses to reduce the sulfate deposits and allow existing sulfate deposits to slowly degrade. It does not matter whether the battery is being charged or not. A trickle charger can therefore be connected at the same time, e.g. in the case of Mottorad batteries. Of course, the lead battery activator also extends the life of car batteries that are in daily active operation.Technical dataOperating voltage: approx. >11-16VAutomatic deactivation: approx. <11vMax. Pulse current: approx. <100ADuration pulse current: approx. 100 µSekPulse sequence: approx. every 5 secCurrent consumption: ca. <0,2mAPulse display: ledCan also be used for GEL batteriesDimensions: approx. 74 x 51 x 30 mm (without mounting straps)Commissioning:If the lead battery activator has been connected to the battery and the battery has a voltage of at least 11v, then the built-in led flashes only briefly at intervals of about 5 sec. each time, signaling the operating status.Scope of delivery:1x Kemo m202 lead battery activator / refresher
€15.61*
€13.12**
The Kemo m202 lead battery activator / refresher works against the deposition of lead sulfate and thus increases the service life of the car battery. ...
Converts a battery voltage of 9 - 12V DC into a weak pulsing high voltage of about 1000V.
For small animal fences, as burglary protection, etc. To release an electrical stroke both high voltage wires have to be touched by the animals paw, tounge, snout or alike at the same time
€10.41*
Converts a battery voltage of 9 - 12V DC into a weak pulsing high voltage of about 1000V.
For small animal fences, as burglary protection, etc. To re...
Converts a battery voltage of 9 - 12V DC into a weak pulsing high voltage of about 1000V.
For small animal fences, as burglary protection, etc. To release an electrical stroke both high voltage wires have to be touched by the animals paw, tounge, snout or alike at the same time
€11.03*
Converts a battery voltage of 9 - 12V DC into a weak pulsing high voltage of about 1000V.
For small animal fences, as burglary protection, etc. To re...
Converts a battery voltage of 9 - 12V DC into a weak pulsing high voltage of about 1000V.
For small animal fences, as burglary protection, etc. To release an electrical stroke both high voltage wires have to be touched by the animals paw, tounge, snout or alike at the same time
€9.94*
Converts a battery voltage of 9 - 12V DC into a weak pulsing high voltage of about 1000V.
For small animal fences, as burglary protection, etc. To re...
High-Power Ultrasonic Pulse Generator with Loudspeaker...to chase away wild animals such as martens, wild boars, deers etc from gardens, farmlands etc. The loudspeaker emits pulsed ultrasonic sounds, which have an acoustic range of up to 300 m with a tube placed upon (not included).
€19.24*
€26.90*(28.48% saved)
High-Power Ultrasonic Pulse Generator with Loudspeaker...to chase away wild animals such as martens, wild boars, deers etc from gardens, farmlands etc...
Converts a battery voltage of 9 - 12V DC into a weak pulsing high voltage of about 1000V.
For small animal fences, as burglary protection, etc. To release an electrical stroke both high voltage wires have to be touched by the animals paw, tounge, snout or alike at the same time
€11.20*
Converts a battery voltage of 9 - 12V DC into a weak pulsing high voltage of about 1000V.
For small animal fences, as burglary protection, etc. To re...
Converts a battery voltage of 9 - 12V DC into a weak pulsing high voltage of about 1000V.
For small animal fences, as burglary protection, etc. To release an electrical stroke both high voltage wires have to be touched by the animals paw, tounge, snout or alike at the same time
€10.25*
Converts a battery voltage of 9 - 12V DC into a weak pulsing high voltage of about 1000V.
For small animal fences, as burglary protection, etc. To re...
With the Kemo m120 infrared spotlight, objects are visible to ccd cameras even in complete darkness. For humans, the infrared light is invisible, ccd cameras can see well with an infrared spotlight. Ideal for more "inconspicuous" observation of house entrances, driveways, etc.Note on operationccd cameras have different sensitivity. Therefore, the range of the infrared spotlight may be different, depending on the sensitivity of the camera. This infrared spotlight should only be used in complete darkness, without extraneous light influence. Reason: many cameras have a light sensor that regulates the sensitivity of the camera depending on the brightness of the day. This light sensor responds preferentially to visible light. So if there is another, weak light source (candle, monitor screen or similar), the sensor will immediately regulate the camera's sensitivity back and you will have the impression that the spotlight has almost no effect.Technical dataOperating voltage: 12-15 v/dcPower consumption: <300mARange: approx. 5mWavelength: approx. 875 nmDimensions: approx. 72 x 50 x 18 mm (with LEDs)Commissioning:The infrared spotlight must be mounted in a weather-protected location. For operation either a rechargeable battery 12 v/dc or a stabilized power supply with an output voltage between 12-15 v/dc is suitable. The power supply must have an output of at least 300mA. The spotlight has its maximum power at an operating voltage between 12 and 15 v/dc. If the operating voltage is too low, the performance of the headlamp will drop significantly. If the operating voltage is too high (>15 v/dc), the unit will generate too much heat and may become defective.Scope of delivery:1x Kemo m120 infrared spotlight for ccd cameras
€14.78*
With the Kemo m120 infrared spotlight, objects are visible to ccd cameras even in complete darkness. For humans, the infrared light is invisible, ccd ...
Converts a battery voltage of 9 - 12V DC into a weak pulsing high voltage of about 1000V.
For small animal fences, as burglary protection, etc. To release an electrical stroke both high voltage wires have to be touched by the animals paw, tounge, snout or alike at the same time
€20.98*
Converts a battery voltage of 9 - 12V DC into a weak pulsing high voltage of about 1000V.
For small animal fences, as burglary protection, etc. To re...
Converts a battery voltage of 9 - 12V DC into a weak pulsing high voltage of about 1000V.
For small animal fences, as burglary protection, etc. To release an electrical stroke both high voltage wires have to be touched by the animals paw, tounge, snout or alike at the same time
€13.41*
Converts a battery voltage of 9 - 12V DC into a weak pulsing high voltage of about 1000V.
For small animal fences, as burglary protection, etc. To re...
Converts a battery voltage of 9 - 12V DC into a weak pulsing high voltage of about 1000V.
For small animal fences, as burglary protection, etc. To release an electrical stroke both high voltage wires have to be touched by the animals paw, tounge, snout or alike at the same time
€18.92*
Converts a battery voltage of 9 - 12V DC into a weak pulsing high voltage of about 1000V.
For small animal fences, as burglary protection, etc. To re...
If the sensor plate gets into contact with rain or slushy snow / hail, it switches on a relay. Sun blinds may be retracted with that, skylights may be closed or a simple rain alarm can be given. The automatically heated surface of the sensor prevents any freezing or wetting of the sensor surface. 2 installed LEDs indicate the function. Waterproof-encapsulated electronics.
Note: The electronics of the rain sensor reacts to the electrical conductivity of the water. We have now ascertained that there are areas where rainwater falls, which is absolutely clean (distilled water). The sensor does not react to this. The water must be at least slightly contaminated (fractions of dust, smoke, etc.) so that the water is electroconductive and triggers the sensor. In Germany the rainwater is conductive in 99% of the areas. If the sensor does not trigger in your case, you should install it in such a manner that the rainwater runs at first over a small porch roof or the like before the water touches the sensor. If the water falls directly from the cloud on the sensor in its purest form and does not trigger it, it will be sufficient if it runs over a small board or from a porch roof on the sensor. Then the water will have absorbed enough impurifications that it will be electroconductive and triggers the sensor. Of course, the sensor has to be built it slantwise so that the water runs down again. Technical data:
Operating voltage: 12 V/DC
Current consumption without / with heating: ca. 8 / 160 mA
Relay contact: 1 x ON, maximum load 25 V, 2 A
Sensor heating automatically in case of contact with rain
Light-emitting diode 1 indication that the rain sensor works
Light-emitting diode 2 indication that rain is reported and the relay has switched on
Duty cycle of the relay as long as the sensor is wet
The module is encapsulated waterproof.
Active sensor surface, gold-plated: ca. 29 x 30 mm
Dimensions: ca. 65 x 45 x 36 mm
€22.09*
If the sensor plate gets into contact with rain or slushy snow / hail, it switches on a relay. Sun blinds may be retracted with that, skylights may be...
Converts a battery voltage of 9 - 12V DC into a weak pulsing high voltage of about 1000V.
For small animal fences, as burglary protection, etc. To release an electrical stroke both high voltage wires have to be touched by the animals paw, tounge, snout or alike at the same time
€11.90*
Converts a battery voltage of 9 - 12V DC into a weak pulsing high voltage of about 1000V.
For small animal fences, as burglary protection, etc. To re...
With 4 end clamps modules can be mounted on profile rails.
Features:
material: aluminuium
opening for M8 screws
frame height of 35mm
dimensions: 70 x 30 x 39mm
€1.27*
€1.07**
With 4 end clamps modules can be mounted on profile rails.
Features:
material: aluminuium
opening for M8 screws
frame height of 35mm
dimensions...
The bc01 Female from Betteri (mpn bc01B) is used for connection to a Envertech-, Hoymiles- or Huayu inverter. The opposite side can be connected to a h07rn-f rubber hose cable with a diameter of 10-14mm. It is a three-pole socket made of UV-resistant material. In addition, it is dustproof and waterproof according to protection class ip67, making it suitable for indoor and outdoor use. Product features Suitable for 1-phase inverters from e.g. Envertech, Hoymiles or Huayu Suitable for cables with a diameter of 10-14mm Dust and waterproof according to ip67 UV resistant - Suitable for indoor and outdoor installation Technical features Number of poles: 3-pole Material: plastic Operating temperature range: -40°C - +85°C Rated voltage: 230v AC Rated current: 25A Dimensions: 85.5 x 34.8 x 34.8 mm Weight: approx. 50g Scope of delivery: 1x Betteri bc01 female power plug
€5.34*
€4.49**
The bc01 Female from Betteri (mpn bc01B) is used for connection to a Envertech-, Hoymiles- or Huayu inverter. The opposite side can be connected to a ...
The end cap of Betterie (mpn bc01c) is used to close the unused 3 pole AC socket of the PV inverter of e.g. Envertech, Hoymiles or Huayu. Product features Suitable for 1-phase inverter from e.g. Envertech, Hoymiles or Huayu Closure of Betteri bc01 Female connector Dust and waterproof according to ip67 UV resistant - Suitable for indoor and outdoor mounting Scope of delivery: 1x Betteri Closure cap for bc01 socket
€3.56*
€2.99**
The end cap of Betterie (mpn bc01c) is used to close the unused 3 pole AC socket of the PV inverter of e.g. Envertech, Hoymiles or Huayu. Product f...
Lapp SOLAR XLS-R T 2x4mm is a radiation cross-linked high-end solar cable made in Germany with optimised cable design, the solar cable is slim, light and robust and saves a lot of time during installation.
The twin cable can be easily separated into two cables if necessary. You do not need any special tools for this. Nevertheless, the connection of the two wires is extremely stable if you prefer to leave the cable together.
This article is sold by the metre. Each item corresponds to one metre. If you buy e.g. 10x this article, you will receive a coherent piece with 10m length.
Product features
Weather/UV resistant according to HD 605/A1
Ozone resistant according to EN 50396
Halogen free and flame retardant
Good notch and abrasion resistance
XLS-R T= X-Linked Standard-Reduced Twin
Proven electron beam crosslinked quality
Standard references / approvals
Also available as TÜV PV1-F certified version on request - Ideal for stand-alone PV systems
Areas of application
Ideal for stand-alone PV systems
Gable and flat roof photovoltaic systems
Photovoltaic or solar field systems
Flexible or building-integrated PV systems
Benefit
Easy to separate into two individual lines
Reduced outer diameters allow space- and weight-saving installation
Robust against mechanical impact
Reduction of fire spread and toxic smoke formation in case of fire
Exact quantity control during installation due to metre marking on the cable jacket
Structure
Fine stranded, tinned copper conductor
Core insulation of irradiated copolymer
Outer sheath of irradiated copolymer
Outer sheath colour: Black
Cores connected in parallel with separator
Technical data
Core ID code: black / red - blue / red
Classification: ETIM 5.0 Class-ID: EC001578 ETIM 5.0
Class-Description: Flexible cable
Conductor construction: Fine-stranded according to VDE 0295, Class 5 / IEC 60228 Cl.5
Minimum bending radius: Fixed installation: 4 x outer diameter
Rated voltage: AC U0/U : 600/1000 V DC U0/U : 900/1500 V
Max. permissible system voltage: DC 1.8 kV (conductor-conductor, not earthed system)
Test voltage: AC 6500 V
Temperature range: -40°C to +100°C max. conductor temperature
Lapp SOLAR XLS-R T 2x4mm is a radiation cross-linked high-end solar cable made in Germany with optimised cable design, the solar cable is slim, light and robust and saves a lot of time during installation.
The twin cable can be easily separated into two cables if necessary. You do not need any special tools for this. Nevertheless, the connection of the two wires is extremely stable if you prefer to leave the cable together.
€2.79*
€2.34**
Lapp SOLAR XLS-R T 2x4mm is a radiation cross-linked high-end solar cable made in Germany with optimised cable design, the solar cable is slim, l...
solar cable xls-r t bk/rd solar cables - Key product features:
1. solar cables xls-r t are halogen-free, double-insulated and cross-linked twin cables for permanent outdoor use. These cables are used in the construction of photovoltaic systems both for wiring the individual solar modules to each other and for wiring to the inverter
2. Construction data --- Conductor: Fine stranded tinned cu wire, according to iec 60228, class 5 --- Core insulation: temperature resistant and halogen-free co-polyolefin, radiation crosslinked Pair colors: black/red --- Outer sheath: flame retardant and halogen-free co-polymer, radiation crosslinked Outer sheath color: black
3. Special features of the cross-linked compound are, besides the extended temperature range, very good values regarding uv-, ozone-, and weathering resistance as well as abrasion resistance. They are used for cabling solar modules to each other, as well as for connecting the individual module rows and the inverter.
This article is sold by the metre. Each item corresponds to one metre. If you buy e.g. 10x this article, you will receive a coherent piece with 10m length.
Electrical properties
Rated voltage u0/u according to vde: ac 600/1000 v / dc 900/1500 v
Maximum permissible dc voltage: 1.8 kv dc (conductor/conductor, not grounded system)
Test voltage ac 6.5 kv dielectric strength tests according to en 50395
thermal properties
temperature range fixed: -40° c to +100° c max. conductor temperature
Short circuit temperature +200°c
installation temperature flexible: max. -25 °c
thematic life according to en 60216-2
Thermal pressure resistance according to en 60811-3-1
Humidity-heat test according to en 60068-2-78 at 85% humidity
Mechanical properties
Minimum bending radius occasionally moved: 15 x cable diameter
permanently installed: 5 x cable diameter
Dynamic penetration: according to requirement profile ak 411.2.3 appendix F
Tear propagation resistance: according to requirement profile ak 411.2.3 Annex G
Testing of insulation and sheath tear strength as well as elongation: according to en 60811
chemical properties
Ozone resistance: according to en 50396 part 8.1.3 method B
Weathering / Uv resistance according to hd 605/A1
Fire behavior flame retardant according to iec 60332-1-2
Halogen-free according to iec 60754-1
Acid and alkali resistance according to en 60811-2-1 (oxalic acid and caustic soda)
EC Directives
The cables conform to the EC directives 2006/95/ec (low voltage directive) and 2002/95/ec and 2011/65/ec (RoHS, restriction of the use of certain hazardous substances).
installation in the ground
In principle, solar cables can be laid underground in protective pipes suitable for underground installation if it is ensured that there is no permanent contact with water and that waterlogging is safely drained away. The installation of the cables and the correct design of the cable trench must comply with vDE 0100 part 520 or comparable standards.
€4.15*
€3.49**
solar cable xls-r t bk/rd solar cables - Key product features:
1. solar cables xls-r t are halogen-free, double-insulated and cross-li...
Lapp SOLAR H1Z2Z2-K cables are weather, abrasion and UV-resistant photovoltaic cables. These halogen-free, double-insulated and cross-linked solar cables are suitable for permanent outdoor use to connect earthed and unearthed photovoltaic systems. They are used both for wiring solar modules to each other and for connecting the individual module rows and the inverter. The cable has been tested by TÜV Rheinland according to 2 PfG 1169/08.2007 (PV1-F) design.
This article is sold by the metre. Each item corresponds to one metre. If you buy e.g. 10x this article, you will receive a coherent piece with 10m length.
Important product features:
Cable cross-section: 6mm²Manufacturer: Lapp KabelColour outer insulation: Black
H1Z2Z2 Solar cables from Lapp can generally be laid in protective pipes suitable for buried installation in the ground if it is ensured that there is no permanent contact with water and that waterlogging is safely drained away. The laying of the cables in the ground as well as the correct design of the cable trench must comply with VDE 0100 Part 520 or comparable standards in order to prevent damage to the protective conduit and permanent exposure of the cables and conduits to penetrating water. Long-term, permanent storage as well as permanent operation of the cables in or under water is not permitted.
Conductor structure
1. conductor: fine stranded tinned copper wire, according to IEC 60228, class 52. core insulation: electron beam cross-linked polyolefin co-polymer3. outer sheath electron beam cross-linked polyolefin co-polymer
Electrical properties
Rated voltage: U0 /U according to IEC AC 1000/1000 V - DC 1500/1500 VMax. permissible system voltage: 1.8 kV DC (conductor/conductor, not earthed system) according to TÜV 2 PfG 1169/08.2007 Test voltage AC 6.5 kV - DC 15 kV
Thermal properties
Temperature range fixed: -40° C to +120° C max. conductor temperature (according to EN 60216-2)Temperature range fixed installation: -40 °C to +90 °C ambient temperature (according to TÜV 2 PfG 1169/08.2007)Installation temperature flexible: max. -25 °CThermal pressure resistance according to EN 60811-3-1Humidity-heat test according to EN 60068-2-78 at 85% air humidity
Mechanical properties
Minimum bending radius when occasionally moved: 4x outer diameterMinimum bending radius if permanently installed: 5 x cable diameterDynamic penetration according to DKE requirements profile PV1-F AK 411.2.3 Annex FTear resistance according to DKE requirements profile PV1-F AK 411.2.3 Annex GTest of tear resistance and elongation according to EN 60811
Chemical properties
Weathering / UV resistance according to EN 50618Ozone resistance according to EN 50396, method BHalogen-free according to EN 50267, EN 50525-1Flame retardant according to IEC 60332-1-2Acid and alkali resistance according to EN 60811-404 (oxalic acid and caustic soda)
Scope of delivery
1x 1m Lapp solar cable H1Z2Z2-K 1X6 WH/BK
From
€0.94*
From €0.79**
Lapp SOLAR H1Z2Z2-K cables are weather, abrasion and UV-resistant photovoltaic cables. These halogen-free, double-insulated and cross-linked solar cab...
This set includes a male and a female MC4-plug. These plugs are original Stäubli MC4-plugs.
Details:
touchproof, unplugged IP2X
protection, plugged IP67
temperature range from -40° to 90°C
isolation material: PA
snap-in locking-system
cable strain relief according to IEC 61984 (06.2001)
contact system: MC-contact lamellas
contact material: tinned copper
flame class:UL94-V0
protection class: II
system voltage up to 1000V
rated amperage up to 30A
€3.99*
€3.35**
This set includes a male and a female MC4-plug. These plugs are original Stäubli MC4-plugs.
Details:
touchproof, unplugged IP2X
protection, ...
A middle clamp is needed when more than one module is installed on a profile rail.
Features:
material: aluminium
opening for M8 screws
space between modules: 2cm
dimensions: 70 x 35 x 15cm
€1.27*
€1.07**
A middle clamp is needed when more than one module is installed on a profile rail.
Features:
material: aluminium
opening for M8 screws
space bet...
The Offgridtec solar cable 2x6mm² is a radiation crosslinked high-end solar cable. With optimized cable design, the solar cable is slim, light and robust and saves a lot of time during installation. The twin cable can be easily separated into two cables if needed. You do not need any special tools for this. Nevertheless, the connection of the two wires is extremely stable if you prefer to leave the line together. This article is sold by the meter. Each article corresponds to one meter. If you buy e.g. 10x this article, you will get a coherent piece with 10m length. Use Easily separable into two single lines Robust against mechanical impact Reduction of fire spread and toxic smoke formation in case of fire Structure Fine stranded, tinned copper conductor Core insulation made of radiation crosslinked copolymer Outer sheath made of irradiated crosslinked copolymer Outer jacket color: black (cores connected in parallel with separator) Scope of delivery: 1x 1m solar cable 2x6mm² (yard goods)
€2.83*
€2.38**
The Offgridtec solar cable 2x6mm² is a radiation crosslinked high-end solar cable. With optimized cable design, the solar cable is slim, light an...
Das Offgridtec Solarkabel 2x4mm² ist eine strahlenvernetzte High-End Solarleitung. Mit optimierten Leitungsdesign ist das Solarkabel schlank, leicht und robust und spart jede Menge Zeit bei der Installation.
Die Zwillingsleitung kann bei Bedarf leicht in zwei Leitungen getrennt werden. Dafür benötigen Sie keinerlei besonderes Werkzeug. Trotzdem ist die Verbindung der beiden Adern extrem stabil wenn Sie die Leitung lieber zusammen lassen möchten.
Bei diesem Artikel handelt es sich um Meterware. Jeder Artikel entspricht einen Meter. Wenn Sie z.B. 10x diesen Artikel kaufen, erhalten Sie ein zusammenhängendes Stück mit 10m Länge.
Nutzen
Einfach in zwei Einzelleitungen trennbar
Robust gegen mechanische Einwirkung
Reduktion der Brandausweitung sowie der toxischen Rauchgasbildung im Brandfall
Aufbau
Feindrähtiger, verzinnter Kupferleiter
Aderisolation aus strahlenvernetztem Copolymer
Außenmantel aus strahlenvernetztem Copolymer
Außenmantelfarbe: Schwarz (Adern parallel mit Trennsteg verbunden)
Lieferumfang:
1x 1m Solarkabel 2x4mm² (Meterware)
€1.94*
€1.63**
Das Offgridtec Solarkabel 2x4mm² ist eine strahlenvernetzte High-End Solarleitung. Mit optimierten Leitungsdesign ist das Solarkabel schlank, lei...