The us3000c (mpn us3000c) is a lithium storage system of the latest generation. The accumulator was specially developed to fully meet the high demands placed on a solar accumulator today. Maximum safety and a long service life are guaranteed even with regular deep discharge thanks to the latest technology. The latest battery of the market-leading manufacturer with now 3.5 kWh per module has again a battery management system (bms) built into each module and therefore offers a lot of security. Internally, the individual cells are thus monitored and balanced against overvoltage, overtemperature, deep discharge, etc. protected. The battery is compatible and certified with many available inverters. Features Extremely cycle resistant - over 6000 cycles at 95% DoD More usable energy content than the previous model US3000 Lifetime over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging power possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function capable of reducing the current surge when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect ESS system from overvoltage function Battery management system in each module The battery management system integrated in each module protects each installed battery cell from harmful influences over the entire life of the module and effectively prevents premature failure. Protection against: Deep discharge and overcharge overvoltage during charging excessive currents during charging and discharging over and under temperature Short circuit and reverse polarity Constant monitoring of the individual cell voltages (cell balance) Modular design The system has a modular design and can be configured precisely to the desired storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) accumulator and an integrated BMS. High cycle life The extremely high cycle life of the installed LiFePo4 cells make Pylontech us3000c modules the optimal storage solution for photovoltaic systems. Regardless of whether the solar system is grid-connected or stand-alone, the Pylontech storage system offers several advantages over typical lead-acid batteries and other lithium technologies. Technical data Battery Type: Lithium Iron Phosphate (LiFePo4) Rated voltage: 48V Rated capacity: 3552 Wh Usable capacity (95% DoD): 3374 Wh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. Peak (discharge) charging current: 90A Max. (Discharge) charging current: 74A Recommended charge/discharge current: 37A Communication: rs485, CAN Weight: 32 kg Dimensions: 442 x 420 x 132 mm Protection class: IP20 Temperature range charge: 0°C - +50°C Temperature range discharge: -10°C - +50°C Temperature range storage: -20°C - +60°C Service life: over 10 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 years manufacturer warranty Certification: TÜV, ce, UN38.8 Due to the classification as dangerous goods, this product will be shipped by freight forwarding! Scope of delivery: 1x Pylontech us3000c LiFePO4 3.5 kWh 1x cable set parallel connection incl. grounding 1x rj45 data cable 1x mounting screws 1x user manual
From
€1,013.31*
From €851.52**
The us3000c (mpn us3000c) is a lithium storage system of the latest generation. The accumulator was specially developed to fully meet the high demands...
The Pytes e-box 48100r-c (mpn 110402100007) is a state-of-the-art LFP battery with 100 Ah capacity and is characterized by its high level of safety, sophisticated design and impressive performance. The battery is compact, easy to install, maintenance-free and can be used as the basic building block of an energy storage system by connecting it in parallel. Applications range from self-consumption coverage in private homes to small commercial and industrial energy storage systems, as well as in telecommunication stations.The Pytes E-BoxLatest generation LFP storageOver 6000 cycles at 90% DoDIntelligent energy managementIdeal for emergency power supplyExtensive compatibilityModularly expandableCAN and rs485 communicationIntelligent energy managementThe intelligent Pytes battery offers a comprehensive energy management system. Through real-time measurements, monitoring and management, it optimizes the system service life using intelligent algorithms. The battery thus ensures efficient and sustainable use of the available energy.Reliable emergency power supplyThe simple installation and user-friendly design make Pytes batteries a practical option for ensuring an uninterrupted power supply in your home. With their intelligent control features, Pytes batteries can optimize energy consumption and maximize battery life to ensure your backup power supply is efficient and reliable.Long service life and maximum safetyPytes batteries are characterized by their impressive service life and high level of safety. With over 6000 cycles at 90% depth of discharge (dod), they offer an exceptionally long service life. Whether it is a grid-connected solar system or a self-sufficient stand-alone system, the Pytes storage system offers several clear advantages over conventional lead batteries and other lithium technologies.Technical dataBattery chemistry: Lithium iron phosphate (LFP)Nominal voltage: 51.2 VVoltage range: 47.5-57.6 VNominal power: 100 AhNominal energy: 5.12 kWhMax. Charging current: 50 AMax. Discharge: 50 ACharging temperature: 0~50°CDischarging temperature: -10~50°CEfficiency: =95%Communication protocol: rs-232, rs-485, CANCycle life: >6000 cycles at 90% DoDDimensions: 440 x 620 x 117 mmWeight: 51 kgScope of delivery:1x Pytes E-Box 48100r-c
€1,307.81*
€1,099.00**
The Pytes e-box 48100r-c (mpn 110402100007) is a state-of-the-art LFP battery with 100 Ah capacity and is characterized by its high level of safety, s...
The Offgridtec MPPT Pro-Duo (MPN 1-01-011200) is an innovative high-end solar controller that was essentially designed for mobile applications. A variety of different board battery types can be charged via the primary charging output (BATT-1). The battery spectrum ranges from AGM, GEL and liquid lead acid to state-of-the-art LiFePO4 and Li-NiCoMn battery systems. The secondary battery charge output (BATT-2) is designed for a starter battery that is at the same voltage level as BATT-1. The unit automatically detects the system voltage of the starter battery (BATT-2) and charging of the BATT-2 begins as soon as the preset conditions are met.
The controller uses the advanced MPPT control algorithm that minimises the maximum power point loss rate and loss time, quickly tracks the maximum power point (MPP) of the PV generator, and processes the maximum energy from the PV generator under all conditions. Energy utilisation in a PV system with MPPT controller is increased by 20 to 30% compared to the PWM charging method.
Features Highlights of the MPPT Pro DUO 30 A
Max Power-Point Tracking technology with ultra-fast tracking speed and a guaranteed tracking efficiency of at least 99.5%.
Advanced MPPT control algorithm to minimise MPP loss rate and minimise time loss.
Higher range of MPP operating voltage to improve PV module utilisation.
Possibility of limiting the charging power by user or automatic charging current (BATT-1).
Digital circuit control of adaptive three-stage charging mode to improve BATT-1 lifetime.
The product will enter power saving mode if no manual input has been made for a long time and charging conditions are not met (PV<5v).>
100% charge and discharge in the operating temperature range.
AES control signal for auto-refrigerator to avoid energy waste.
Standard Modbus protocol and RS485 communication port (5V/200mA).
Overview of the most important technical features
Maximum charging current: 30A at a battery voltage of 12V or 24V.
Optional remote display with mounting frame available.
Supports all major battery types.
Active temperature equalisation for optimal charging and ensuring long battery life.
Max. Solar power 390W at 12V system voltage and 780W at 24V system voltage.
100V max. PV input voltage
Grounding: Negative
Dimensions: 24.7cm x 16.5cm x 6.9cm (LxWxH)
Connection terminals Battery 1: 16mm² (AWG6) / Battery 2: 4mm² (AWG12)
Weight: 1,4KG
Diameter of mounting holes: 5mm
Energy consumption: 26mA at 12V / 15mA at 24V
Max. Efficiency: 98
Intelligent energy saver
If there is no manual operation for an extended period of time and charging conditions are not present, the MPPT-Pro Duo will switch to energy saving mode, reducing the unit's energy consumption to a minimum. This behaviour also reduces wear and tear on the unit, which is reflected in a significantly longer service life. The system parameters are displayed and set directly via the intuitive control panel on the controller or via the MT11 remote control (accessory).
System communication and protection functions
The refrigerator's AES control signal is built into the controller, which delivers excess solar power to the refrigerator to prevent energy waste. The protection class of the MPPT Duo is IP33. It resists splashing water and is dust-tight. Our MPPT Pro DUO has multiple protection functions, including battery overcharge protection, discharge protection and reverse polarity protection of PV and battery, which effectively ensure the safety, stability and service life of the solar system.
Scope of delivery:
1x Offgridtec 1-01-011200 MPPT DUO charge controller.
1x instruction manual
€111.84*
€93.98**
The Offgridtec MPPT Pro-Duo (MPN 1-01-011200) is an innovative high-end solar controller that was essentially designed for mobile applications. A vari...
The Multiplus-II 48/3000/35-32 gx is a high-end device combination from victron Energy (mpn pmp482306000) that combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and Powerassist functions to 50 a and the potential range of use to ess applications. The inverter module delivers a whopping 3000 w at non-linear load, or 2400 w at linear continuous load. the 48 v battery charger is also very well proportioned, with 35 a charging power, and is complemented by a 32 a transfer switch that allows lightning-fast switching between aC connections. Compared to the rest of the series, the gx variants have an integrated gx display with numerous other connection options. important features of the Multiplus-II 48/3000/35-32 gx integrated gx control unit with various communication ports PowerControl and Powerassist -increase of mains or generator performance built-in anti-islanding function and connection for external current sensor (optional) can be used as a backup device in grid-connected systems for power supply in case of grid failures can be used in various ess (Energy Storage System) applications best suited for professional seafaring, yachts, vehicles and land-based, off-grid applications vE.Bus interface for parallel and three-phase operation, remote monitoring and system integration virtually unlimited power through parallel and three-phase operation can be configured on-site or remotely using vEConfigure software* technical features 3000w power at non-linear load 2400 w continuous load and 6000 w peak power for 48 v battery voltage, 32 a transfer switch and 35 a battery charger output voltage: 230 vaC, frequency: 50 Hz max. efficiency is 95%, protection class IP22 always enough power thanks to PowerControl and Powerassist a maximum mains or generator current can be set on the Multiplus-II 48/3000/35-32 gx. The MultiPlus-II then takes into account other connected AC consumers and only uses the current that is "left over" to charge the battery. This prevents the generator or mains connection from being overloaded (PowerControl function). The Powerassist function adds a new dimension to the PowerControl principle. Load peaks often only occur for a limited period of time. In such a case, the MultiPlus-II immediately compensates for insufficient generator, shore power or mains power with energy from the battery. if the load is reduced, i.e. if consumers are switched off, the energy that is then available again in sufficient quantities can be used to charge the batteries Solar power: alternating current even in the event of a power failure The device can be used with both non-grid-connected and grid-connected pv systems, as well as with other alternative energy systems. It can be used with both solar charge controllers and grid-connected inverters. maximum flexibility thanks to two AC outputs The main output ensures uninterrupted operation. In the event of a grid failure or interruption of the shore/generator power, the MultiPlus-II takes over the supply of the connected consumers. Switching occurs so quickly (in less than 20 milliseconds) that uninterrupted operation of computers and other electronic equipment is guaranteed. The second output supplies power only when AC power is available at the input of the MultiPlus-II. consumers that must not discharge the battery, such as a water heater, can be connected to this output. Scope of the integrated gx device A vE.Can interface This can be used to connect vE.Can devices from victron (e.g. vE.Can mppt). The port can also be reconfigured via the remote console for use with a compatible CaN bus Li-Ion battery. 1xUSB connection 1x Ethernet port 1x vE.Direct connection many possibilities for system expansion Settings can be changed within minutes using the vEConfigure software (requires a computer or laptop and MK3 USB interface).multiple monitoring and control options are available: Color Control gx, venus gx, Octo gx, CaNvu gx, laptop, computer, Bluetooth (with the optional vE.Bus Smart Dongle), battery monitor, Digital Multi control panel Remote configuration and monitoring Install a Color Control gx or other gx products to connect to the Internet. Operating data can be stored and viewed free of charge on our vRM (victron Remote Management) website. If systems are connected to the Internet, they can be accessed remotely and settings can be changed. Scope of delivery: 1x victron pmp482306000 Multiplus-II 48/3000/35-32 gx 230 v 1x instruction manual
€800.10*
€672.35**
The Multiplus-II 48/3000/35-32 gx is a high-end device combination from victron Energy (mpn pmp482306000) that combines classic Multiplus components w...
The solar module 150w mono from Offgridtec (mpn 3-01-001255) works with monocrystalline solar cells with a high efficiency of >22,3% and is ideal for 12v systems thanks to its 20v operating voltage. In Offgridtec mono solar modules only cells of the highest quality grade are installed and guarantee a constant high quality and performance with maximum service life thanks to state-of-the-art manufacturing. Features of Offgridtec 150w 12v mono solar panel proven quality directly from Offgridtec manufactured according to the latest standards monocrystalline solar cells extremely resistant ESG glass makes the module usable even in the most adverse environmental conditions ideal for 12v systems on land or in mobile solar systems 2 bypass diodes - minimized power loss in shaded conditions The mono 150w 12v is one of over 40 proven solar panels from the Offgridtec portfolio and participates in Offgridtecs experience in manufacturing high quality 12v and 24v solar cells. The module can be used in very adverse operating conditions thanks to the extremely resistant solar glass. It can withstand heavy hail and storms or extreme cold and heat without any problems and thanks to the integrated bypass diodes, the module can continue to produce power even in shaded or low light conditions. The most important technical data at a glance Power (Pmax): 150w Working voltage (Vmp): 20 V Open circuit voltage (Voc): 24 V max. current (Imp): 7.5 A Short circuit current (Isc): 8.1 A max. system voltage: 1000 V permissible ambient temperature: -40°C - +85°C Dimensions: 1140 x 680 x 35 mm Weight: 12 kg Universally applicable Offgridtecs 150w 12v Mono is universally applicable for example in 12 Volt Solaranlagen on garden houses, allotments or for the power supply of lighting applications, self-sufficient systems of signal and surveillance technology and many more. But also in mobile systems such as in mobile home solar systems this panel makes a good figure. The connection cables are 80 cm long and equipped with MC4 connectors. Scope of delivery: Offgridtec 3-01-001255 150w mono 12v solar panel
€130.78*
€109.90**
The solar module 150w mono from Offgridtec (mpn 3-01-001255) works with monocrystalline solar cells with a high efficiency of >22,3% and is ideal f...
The fsp-2 195w 12v is the second largest and newest member of the Offgridtec fsp family and is also one of the most powerful foldable solar modules in the range. It has a 3-sided design and comes with a matching connection kit that allows you to quickly and easily connect to the charge controller of your choice and the battery to be charged.
Performance that sets standards
The fsp-2 195w Ultra is equipped with American SPR back-contact cells from SunPower. The look of the cells is completely black, which also gives the fsp-2 195w a very modern, high-quality look. The SPR cells ensure a very high efficiency of the panel and set new standards in this power class in combination with the low weight and compact dimensions of the fsp-2 panel.
extensive application possibilities:
excellent usable in the camping area
or for expeditions, climbing tours and much more...
for vehicles and boats without fixed solar installation ...
and numerous other applications in different areas...
technical highlights fsp-2 195w ultra foldable solar panel
Rated power: 195wp
Number of sides: 3 x 65 Wp
Module voltage (Vmp): 33,5 V
Max. Charge current (Imp): 5,82 A
Open circuit voltage (Voc): 39,4 V
Short circuit current (Isc): 6,17 A
Dimensions closed: 820 x 440 x 40 mm
Dimensions open designed: 820 x 1545 x 60 mm
Weight: 7,12 Kg
ETFE coating
SunPower high performance cells
6.0m 5mm² connection cable from fsp-2 to solar charge controller with Anderson connector on solar side
0.5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller)
1m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side
Short-circuit-proof connection to the battery thanks to integrated flat fuse holder with 15a ato fuse
the included Profi-Connection Kit
The connection kit included in the scope of delivery offers everything needed for a quick start-up of the mobile solar set. Each fsp-2 has a 6.0m connection cable, which is equipped with a high-quality Anderson connector at the end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of the charge controller, and is also equipped with an Anderson connector on the other side. So you can quickly connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller.
For the connection of the charge controller to your battery, a 1 meter long plug & play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal crocodile clips on the battery side, which can be conveniently connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with corresponding ato fuse.
customizable on request
All FSP-2 Ultra panels can be modified and delivered according to your specifications within a very short time. We can also flexibly adjust and adapt the cables to your needs. Just ask us! We look forward to hearing from you. Please contact customer service for any costs that may be incurred.
about the fsp-2 series
As with all Offgridtec solar module series, high quality has been emphasized in the fsp-2 series. The fsp-2 195w works with highly effective solar cells. These cells generate efficiencies of over 22% and are the best currently available on the market. In addition, the complete fsp-2 series is coated with ETFE coating, which provides better protection and at the same time ensures very high light transmittance. Furthermore, we produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver maximum technical performance even under the most adverse conditions.
Scope of delivery
1x Offgridtec fsp-2 195w 12v, 3-01-012680
1x Offgridtec fsp-2 Connection-Kit
€403.23*
€338.85**
The fsp-2 195w 12v is the second largest and newest member of the Offgridtec fsp family and is also one of the most powerful foldable solar modules in...
Besides a 290ml cartridge this handy Dekalin adhesive-set also includes the Dekalin Dekavator, DEKACLEAN cloths and a sheet of very fine sandpaper for an ideal preparation of the surface.
Dekasyl MS-5 is a polymer-based adhesive with a high degree of adhesion and initial strength which is ideal for elastic connections of various components.Thanks to it's adhesive power the use of clamps is mostly unnecassary. The Dekasyl MS-5 also serves as sealent between similar materials or when mechanical connections are used.
Application:
Elastic connections and sealing for trains, caravans, trucks, cars,...
Glueing windows of buses, trains, caravans,...
Glueing of edge profiles (aluminium or polyester) of trailers
Glueing of polyester components with metal frame
Characteristics:
Free of solvents, isocyanate and PVC
Very UV- and age-resistant
Very high initial strength. Very high adhesion in general even without priming on various surfaces.
Constantly elastic within a temperature range of -40°C to +120°
Neutral, odorless and quick-setting
After skim-development paintable - normally this does not influence the setting-process
Compatible with most industrial painting systems, alkyd resin paint as well as dispersion paint (because of the many different types of industrial paints a material compatibility test is recommended)
We recommend to mount our spoilers and cable entries only with Dekasyl adhesive together with DEKAvator as this connection had the best outcome in a laboratory test.
Why Dekasyl?
Manufacturers of caravans like Fendt, Dethleffs, Burstner, Carthago, Pilote and Hymer use Dekalin-products in many different areas, for example as sealent for roofs, side panels, undercoating, glueing of PMMA-windows, sound-proofing, engine-covering, and many more.As a global partner of the caravan and camping industry Dekalin provides you with a wide range of latest technology and supports sellers in realizing their demands. They offer special solutions for sealing, glueing, damming and repairing.
Details:Glue color: blackDelivery scope: 1x cartridge 290ml Dekalin 6252412 Dekasyl MS-5 adhesive black, 1x sheet of sandpaper, 1x Dekalin Dekavator 6257812 bottle 30ml, DEKACLEAN cleaning cloths
Besides a 290ml cartridge this handy Dekalin adhesive-set also includes the Dekalin Dekavator, DEKACLEAN cloths and a sheet of very fine sandpaper for...
Dieses Set enthält alles was Sie brauchen um Module mit je max. 1m Breite auf einem Ziegeldach zu befestigen. Die enthaltenen Dach-Haken sind spezielle für Ziegeldächer konstruiert. Durch hochwertigste korrosionsfreie Materialien aus Edelstahl und Aluminium ist eine sichere und langlebige Montage gewährleistet.
Die Stücklisten der Befestigungskits sind für eine Montage der Module direkt nebeneinander konzipiert. Sollten Sie z.B. zwei Reihen untereinander mit je drei Solarmodulen planen benötigen Sie zwei Kits für je drei Module.
Beinhaltet:
Dachhaken 3-fach verstellbar (Edelstahl)
Solar-Profilschienen (Aluminium)
Endklemmen (Aluminium)
Nutensteine (Aluminium)
Endkappen
Alle notwendigen Schrauben und Muttern
Hinweis:
Nur für gerahmte Module mit 30mm/35mm Rahmenstärke
Module sind nicht im Lieferumfang enthalten
Variants from €106.95*
€255.45*
€214.66**
Dieses Set enthält alles was Sie brauchen um Module mit je max. 1m Breite auf einem Ziegeldach zu befestigen. Die enthaltenen Dach-Haken sind spe...
The Autark M-Master is the medium sized complete system of the Autark family and delivers an average daily yield of 800 watt hours between March and October. The generated power is stored in the cycle-proof 122Ah agm battery - the high-quality charge controller with integrated display gives you information about the charge status of the battery while your 230v consumers can be operated at the sine wave voltage converter. Of course, the whole thing is delivered including a professional connection cable kit - plug it together and get started. The system is suitable for a wide range of applications - from 12v lighting, charging laptop, cell phone and camera batteries and other small consumers, to 230v household appliances with a maximum continuous power of 1000w (15min)
Features of the Autark M-Master
If required, module side expandable by 2 x 100w with low installation effort
Average daily yield between March and October: approx. 800wh (approx. 66Ah)
Plug & Play ready-to-connect system - plug together and go
Allows operation of 12v and 230v loads, as well as 5v usb consumers
usb charging possibility directly at the charge controller (max. 2,4A)
Easy to read lcd display informs about all operating parameters
Flexible mounting possibility thanks to 8m connection cable from module to controller
Extensive electronic protection functions, such as overload protection, overtemperature protection, undervoltage shutdown, short-circuit protection, reverse polarity protection, etc.
rs485 communication port on the voltage transformer offers extensive configuration possibilities via pc (interface cable rs485 to usb included)
Charge controller enables temperature compensated charging - temperature sensor included in delivery
Configurable 12v load output at the charge controller for loads up to max. 30a - suitable e.g. for lighting control
Application areas
This complete system can be used in many ways. Whether as a stationary system on the mountain hut or in the allotment garden - the permanent operation of small coolers and refrigerators, as well as the charging of cell phones and laptops succeeds easily with this system. The installation on the motor home is also conceivable - we also have the corresponding brackets and adhesive sets for the attachment.
Extensive connection options
230v ac 50hz 1000w (15min - 1000w / permanent - 800w / short time (starting currents) - 1600w) Schuko socket on the sine wave voltage converter
12v consumer output with 30a power directly at the charge controller
2 x usb charging port at the charge controller with max. 2.4a (total)
1 x usb charging port at the voltage converter with max. 1a power
Parts list - what's inside
2 x Offgridtec 100w V2 Solarpanel 23V black frame
1 x Pair of solar connector compatible junction boxes for parallel connection of the two solar modules
1 x 30a pwm charge controller with clear lcd display and usb charging possibility - the device also has a 30a load output and is easy to operate - all important parameters can be read on the display
1 x 122Ah agm battery with m8 screw terminal Dimensions: 406 x 174 x 233 mm(+5mm terminal) - the battery is absolutely maintenance free and leak proof and lasts up to 10 years depending on use
1 x 1000w 12v to 230v sine wave voltage converter with a shockproof socket incl. connection cable - the rated power of 1000w can be output by the device for 15 minutes - beyond that the inverter outputs 800w and can handle short time starting currents up to 1600w
1 x 8m 6mm² professional connection cable solar module to charge controller with original Stäubli solar-connectors and high quality Lapp Ölflex 2x6mm² solar cable
1 x 1.5m 10mm² professional battery connection cable with MIDI fuse holder, 40a MIDI fuse and m8 ring terminals for connection between charge controller and battery
1 x Temperature sensor with 3m length for connection of the controller to the batrie
1 x 1m 25mm² connection cable from inverter to battery (included with the voltage converter)
1 x Fuse holder + 125A Mega fuse for installation between voltage transformer and battery positive pole for protection against short circuit
Roof mount for the solar module
Since there are different requirements for the mounting of a module and this varies greatly depending on the type of roof, the systems of the Autark series are not equipped with a roof mount as standard. This can of course be purchased additionally - find suitable suggestions here:
Solar module holder for flat roof or wall mounting
Mounting kit for pitched roof mounting on roof tiles (Frankfurter Pfanne etc.)
Mounting kit for pitched roof mounting on roofing felt, corrugated hernite and sheet metal roofs with wooden substructure
Fastening kit for pitched roof installation on Bieberschwanz tiles
Scope of delivery:
1x Solaranlage Autark M-Master with 2x100w solar panel, 30a pwm charge controller with lcd display and usb ports, 1000w sine wave voltage converter, 122Ah agm battery, user manuals
€741.44*
€623.06**
The Autark M-Master is the medium sized complete system of the Autark family and delivers an average daily yield of 800 watt hours between March and O...
Extremely versatile complete package The Offgridtec® HomePremium series is a true all-rounder at an unbeatable price-performance ratio. As well as being used as a usv backup solution with a choice between mains and battery priority, this PV system can also be used as a self-consumption system. There are virtually no limits to the performance of this Solarasystem - depending on personal requirements and on request, extensions are possible, both on the module and battery side. if a higher output power is required on the inverter, additional identical devices can also be connected here to increase performance. In addition to the power electronics, the storage system and the solar modules, all components required for the connection are also included in the scope of delivery, with the exception of the solar module holder, which must be ordered separately. all other components are plug and play - this means no annoying plug installation or the like - connect and you're done. Depending on your choice, the system is supplied with or without an electricity meter. Parts list - what's inside 30x Luxen Solar 430w Full Black Solar panel Luxneri Series 5 4 x 4.8kwh Pylontech us5000 LiFePo4 storage batteries 1x victron Energy mppt SmartSolar charge controller 450/200 48v 3x victron pmp482505010 Multiplus-II 48/5000/70-50a 1x Cerbo gx + 1x gx Touch 50 from victron Energy - the communication center of your system 1x victron Energy Lynx Distributor for dc distribution and protection 1x victron Energy Lynx Power In 3x 10m Offgridtec® Professional connection cable 6mm² solar module to charge controller for the connection between solar modules and charge controller 2 x Pylontechbattery connection cable set Pylontech to inverter 2 x 2.0m 25mm² amphenol to m8 1x 1m battery cable 50mm² m8 eyelets on both sides 3x 1m battery cable 35mm² m8 eyelets on both sides 3x 10m 6mm² mc-4 connection cable 1x vE.Can to CaN-Bus bms Type a cable 1.8m aSS030710018 for connecting the Cerbo gx to the memory 2x 3m victron rj45 utp cable for connecting the MultiPlus to the Cerbo gx 3x Mega fuse 125a / 70v 1x Mega fuse 250a / 70a 2x 0.9m victron rj45 utp cable 1x Pylontech Battery cabinet for us5000 When selecting electricity meter: 1x victron vm-3p75ct Energy Meter 1x victron 5m rj45 utp cable Extended use of your HomePremium system The HomePremium system is supplied either with or without victron electricity meter and cable, whereby an energy meter with connection cable is mandatory for the installation of an Energy Storage System. With this electricity meter, you can carry out a grid-parallel installation and then monitor your energy consumption and control your energy costs. thanks to phase compensation, you can even use the 3-phase meter for 1-phase systems. This means that seamless integration of decentralized energy sources and consumers into the existing power grid is no problem. Luxen Solar 430w Full Black solar module The monocrystalline and bifacial 430w Full Black Series n5 solar module fromLuxen Solarsolar module impresses with a combination of different technologies, such as N-TOPCon cell technology and a 108 half-cell layout. The smbb half-cut cell technology was also used during production to increase performance. The state-of-the-art solar module represents the pinnacle of solar technology, offering impressive power output and low LCOE. Features Glass-glass module N-TOPCon cell technology smbb Half-Cut cell technology Low bos & LCOE Bifacial cell module technology excellent anti-PID and low lid performance 3 bypass diodes 30-year performance guarantee and 15-year product guarantee high cell efficiency of over 22% Half-cell technology In half-cell technology ("half-cut"), conventional silicon cells are cut in half using a laser. The resulting halves are then centrally connected in parallel, which leads to an increased output of the solar module by reducing resistance losses. Bifacial cells Bifacial means two-faced. And the name says it all: the Luxen Solar 430w n5 module is also equipped with solar cells on the back, which means that sunlight can be absorbed even better and the efficiency of the overall module is increased. Technical data maximum output: 430w Module voltage (vmp): 32.04v max. current (imp): 13.42a Open circuit voltage (voc): 38.96v Short-circuit current (Isc): 14.13a Module efficiency: 22.02% dimensions: 1722 x 1134 x 30 mm Operating temperature range: -40°C to +85°C Cells: 108 (6x18) max. operating voltage: 1500v dc Weight: 23,5kg LiFePo4 storage technology from Pylontech - proven, reliable, safe The us3000c storage battery from Pylontech is a latest-generation lithium iron phosphate battery that offers maximum safety and service life. Each module has a battery management system (bms) for comprehensive protection against deep discharge, overcharging and damage caused by high currents or extreme temperatures. Short circuits and reverse polarity are also excluded. Features of the Pylontech us3000c memory modules Extremely cycle-proof - over 6000 cycles at 95% DoD (discharge per cycle) absolutely intrinsically safe due to integrated protective shutdown (bms) High charging and discharging capacity of up to 5kw per module High storage density Low weight and compact design absolutely maintenance-free and easy to install 10-year guarantee The heart of the system - the victron MultiPlus-II 48/5000 The Multiplus-II 48/5000/70-50 from victron Energy combines classic Multiplus components with an external current sensor and integrated anti-islanding function. This extends the PowerControl and Powerassist functions to 100a and enables use in ESS applications. The setting options on the MultiPlus-II are extremely varied, as are its possible applications. We have already made the most important settings for you so that the system, as it is supplied, lives up to the description "Plug and Play" - the system can therefore be used immediately without any further configuration. Performance features and characteristics of the MultiPlus-II 48/5000 PowerControl and Powerassist - increasing mains or generator output Built-in anti-islanding function and connection option for external current sensor (optional) Can be used as a backup device in grid-connected systems vE.Bus interface for parallel and three-phase operation Remote monitoring and system integration Parallel and three-phase operation Approved according to vde-ar-n 4105 Technical data 5000 w power with non-linear load - 4000 w continuous load - 9000 w peak power For 48 v battery voltage, 50 a transfer switch and 70a battery charger output voltage: 230 vaC, frequency: 50 Hz Max. efficiency: 95% Protection class IP22 Maximum flexibility thanks to two AC outputs The MultiPlus-II offers uninterrupted operation by automatically taking over the supply to consumers in the event of mains failures or interruptions to the shore/generator power. The switchover takes place in less than 20 milliseconds to ensure continuous operation of electronic devices. A second output supplies power only when alternating current is present at the input of the MultiPlus-II. This makes it possible to connect consumers such as a water heater that should not be discharged from the battery. Configuration The MultiPlus-II is supplied unconfigured as standard. You can find the configuration instructions for the system here in the download area. If you would like us to pre-configure the system, we can do this for you for an additional charge. To do this, place the article linked above "Offgridtec pre-configuration" in the shopping cart during the ordering process. In this case, shipping may take 3-5 working days longer until the configuration has been completed. victron Energy Cerbo gx and gx Touch 50 - the communication center of your system The latest development in system monitoring from the company allows you to control and configure your system with ease. rounded off by the gxC Touch 50 - a waterproof 5 inch touchscreen - you always have an overview of your system parameters. The Cerbo's functions allow you to control and monitor your system perfectly and maximize system performance in an unprecedentedly simple way. victron Energy has developed a new system monitor that allows you to easily control and configure your system. The gx Touch 50, a waterproof 5-inch touchscreen, provides a clear overview of your system parameters. The Cerbo module allows you to precisely monitor your system and maximize performance. It is compatible with both solar charge controllers and grid-connected inverters. Mounting material and connection cable are included in the scope of delivery. The Bluetooth function of the gx Touch 50 makes accessing your system even quicker and easier. An optional wall bracket is available. victron Remote portal The victron Remote Portal (vRM) is a free victron Energy service that allows you to read out your system data remotely and configure the devices accordingly. This means that you always have full control and an overview of all relevant system parameters, even when you are away. The functionality is available online as a demo version and is ideal for getting a first impression - https://vrm.victronenergy.com/landingpage Safety note: Only have this complete system installed and commissioned by a qualified electrician.
Variants from €16,173.02*
€0.00*
€0.00**
Extremely versatile complete package The Offgridtec® HomePremium series is a true all-rounder at an unbeatable price-performance ratio. As well a...
The Votronic 5543 tank electrode 12-24 k is a universal tank sensor for measuring the tank level. The tank electrode 12-24 k is suitable for service water and septic tanks as well as for fresh water tanks. By using appropriate materials, these tank sensors also comply with the drinking water regulation din 2001-2. It is designed for tanks with a height of between 12 and 24 cm. As a further special feature, the tank electrodes can be mounted on the top of the tank from the inside as well as from the outside. In the case of fresh water tanks, they can even be mounted on the underside of the tank. . essential product features of the 12-24 k tank electrode Rod electrode, easy to shorten to tank height for tanks with a height between 12 and 24 cm Installation diameter 38 mm (or pg 29 thread) Flange diameter 46.5 m Connection cable 75 cm long Easy adjustment to the given tank height linear, stepless signal of the filling level Test mark: E-testing (EMC/vehicle directive) suitable for 12v and 24v continuous operation optimal in combination with Votronic level indicators The tank sensor is compatible with the following Votronic indicators: . Fresh water tank gauge s, 5311 Waste water gauge s, 5313 Holding tank gauge s, 5315 Info Panel Pro, 5330 Info Panel Pro 24v VPC Terra VPC Mercury VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749 Scope of delivery 1x Votronic 5543 12-24 k tank sensor 1x mounting material consisting of sealing ring, union nut pg 29, connection cable 75 cm1x instruction manual
€63.55*
The Votronic 5543 tank electrode 12-24 k is a universal tank sensor for measuring the tank level. The tank electrode 12-24 k is suitable for service w...
The Votronic 5543 tank electrode 12-24 k is a universal tank sensor for measuring the tank level. The tank electrode 12-24 k is suitable for service water and septic tanks as well as for fresh water tanks. By using appropriate materials, these tank sensors also comply with the drinking water regulation din 2001-2. It is designed for tanks with a height of between 12 and 24 cm. As a further special feature, the tank electrodes can be mounted on the top of the tank from the inside as well as from the outside. In the case of fresh water tanks, they can even be mounted on the underside of the tank. . essential product features of the 12-24 k tank electrode Rod electrode, easy to shorten to tank height for tanks with a height between 12 and 24 cm Installation diameter 38 mm (or pg 29 thread) Flange diameter 46.5 m Connection cable 75 cm long Easy adjustment to the given tank height linear, stepless signal of the filling level Test mark: E-testing (EMC/vehicle directive) suitable for 12v and 24v continuous operation optimal in combination with Votronic level indicators The tank sensor is compatible with the following Votronic indicators: . Fresh water tank gauge s, 5311 Waste water gauge s, 5313 Holding tank gauge s, 5315 Info Panel Pro, 5330 Info Panel Pro 24v VPC Terra VPC Mercury VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749 Scope of delivery 1x Votronic 5543 12-24 k tank sensor 1x mounting material consisting of sealing ring, union nut pg 29, connection cable 75 cm1x instruction manual
The fresh water tank gauge s from Votronic (mpn 5311) has been designed for accurate level measurement and can be used for all tank materials and tank sizes. The visualization of the tank level is done by a 3 colored color scale, which is displayed on 10 light emitting diodes, each representing 10% of the tank content. The display works steplessly, as intermediate levels are displayed with variable brightness and thus also tendencies are immediately recognizable The fresh water tank display s is designed as a panel version to match the votronic modular system and fits perfectly with other votronic display units (uniform height 85 mm). of course, it is also possible to retrofit a single display in the vehicle. Small front panel dimensions and the particularly low installation depth of only 18 mm allow installation in almost any position. The display is protected against incorrect polarity and overload and is easy to connect via screw terminals on the rear of the device key product features of the fresh water tank indicator s, 5311 suitable for 12v and 24v dc operating voltage low current consumption: only 1 - 30 ma Test mark: E-testing, (EMC/vehicle directive) Panel dimensions WxHxD: 47 x 85 x 20 mm Installation dimension: 29 x 63 x 18 mm at the push of a button, can be switched on and off high display resolution of the tank level thanks to 10-step display suitable for the Votronic module system can also be operated with 2 tank gauges The indicators can also be assigned with 2 tanks each (e.g. indoor/outdoor tank, summer/winter operation, additional tank, etc.). Single switches 2xUM are suitable for the changeover, e.g. switch panel 16 a s art. no. 1289 or switch panel 2x16 a s art. no. 1291 compatible with many Votronic tank sensors Tank electrode 12-24 k, 5543 tank electrode 15-50 k, 5545 tank electrode 20 k-wc, 5555 tank sensor fl, 5530 tank sensor 30-110 K-fl, 5551 Scope of delivery: 1x Votronic 5311 Fresh water tank indicator s1x set of mounting screws1x drilling template1x instruction manual
€44.01*
The fresh water tank gauge s from Votronic (mpn 5311) has been designed for accurate level measurement and can be used for all tank materials and tank...
The fresh water tank gauge s from Votronic (mpn 5311) has been designed for accurate level measurement and can be used for all tank materials and tank sizes. The visualization of the tank level is done by a 3 colored color scale, which is displayed on 10 light emitting diodes, each representing 10% of the tank content. The display works steplessly, as intermediate levels are displayed with variable brightness and thus also tendencies are immediately recognizable The fresh water tank display s is designed as a panel version to match the votronic modular system and fits perfectly with other votronic display units (uniform height 85 mm). of course, it is also possible to retrofit a single display in the vehicle. Small front panel dimensions and the particularly low installation depth of only 18 mm allow installation in almost any position. The display is protected against incorrect polarity and overload and is easy to connect via screw terminals on the rear of the device key product features of the fresh water tank indicator s, 5311 suitable for 12v and 24v dc operating voltage low current consumption: only 1 - 30 ma Test mark: E-testing, (EMC/vehicle directive) Panel dimensions WxHxD: 47 x 85 x 20 mm Installation dimension: 29 x 63 x 18 mm at the push of a button, can be switched on and off high display resolution of the tank level thanks to 10-step display suitable for the Votronic module system can also be operated with 2 tank gauges The indicators can also be assigned with 2 tanks each (e.g. indoor/outdoor tank, summer/winter operation, additional tank, etc.). Single switches 2xUM are suitable for the changeover, e.g. switch panel 16 a s art. no. 1289 or switch panel 2x16 a s art. no. 1291 compatible with many Votronic tank sensors Tank electrode 12-24 k, 5543 tank electrode 15-50 k, 5545 tank electrode 20 k-wc, 5555 tank sensor fl, 5530 tank sensor 30-110 K-fl, 5551 Scope of delivery: 1x Votronic 5311 Fresh water tank indicator s1x set of mounting screws1x drilling template1x instruction manual
The Votronic Info Panel Pro (MPN 5330) for 12V-systems is a comfortable monitoring and control panel and was designed especially for campers and caravans.It allows the most important control and switching tasks and provides direct monitoring of fresh and waste water tank as well as on-board and starter battery.Additionally it is equipped with main switches for battery and fresh water pump.
On the left-hand side several LEDs display the current battery voltage within a range of 10.5V to 15.0V. Red LEDs show if battery voltage is too low. The integrated button allows to switch between on-board and starter batter or to deactivate the display.
To monitor your tanks the Info Panel Pro comes with two more LED-displays wich show the current tank level steplessly thanks to varying brightness of the single LEDs.This allows full monitoring during all filling and emptying processes.By pushing a button the display can be activated or deactivated - the display deactivates automatically after 10 minutes.
The right-hand display can be switched to a duo-measuring-input by default.
The Info Panel Pro comes with protection from reverse polarity and overload.On its back you find labelled terminals for 6.3mm flat connectors (power supply connections) and pluggable terminal screws (signal connections).
Detailed installation and operating manual, as well as a drilling jig are included in the standard delivery scope.Thanks to its small installation depth of 15mm this panel can be installed nearly everywhere.
€102.78*
The Votronic Info Panel Pro (MPN 5330) for 12V-systems is a comfortable monitoring and control panel and was designed especially for campers and carav...
The Votronic Info Panel Pro (MPN 5330) for 12V-systems is a comfortable monitoring and control panel and was designed especially for campers and caravans.It allows the most important control and switching tasks and provides direct monitoring of fresh and waste water tank as well as on-board and starter battery.Additionally it is equipped with main switches for battery and fresh water pump.
On the left-hand side several LEDs display the current battery voltage within a range of 10.5V to 15.0V. Red LEDs show if battery voltage is too low. The integrated button allows to switch between on-board and starter batter or to deactivate the display.
To monitor your tanks the Info Panel Pro comes with two more LED-displays wich show the current tank level steplessly thanks to varying brightness of the single LEDs.This allows full monitoring during all filling and emptying processes.By pushing a button the display can be activated or deactivated - the display deactivates automatically after 10 minutes.
The right-hand display can be switched to a duo-measuring-input by default.
The Info Panel Pro comes with protection from reverse polarity and overload.On its back you find labelled terminals for 6.3mm flat connectors (power supply connections) and pluggable terminal screws (signal connections).
Detailed installation and operating manual, as well as a drilling jig are included in the standard delivery scope.Thanks to its small installation depth of 15mm this panel can be installed nearly everywhere.
The wastewater tank gauge s from Votronic (mpn 5313) has been designed for accurate level measurement and can be used for all tank materials and tank sizes. The visualization of the tank level is done by a 3 color scalar, based on 10 light emitting diodes, each representing 10% of the tank content. The display works steplessly, as intermediate levels are displayed with variable brightness and thus also tendencies are immediately recognizable The wastewater tank gauge tank gauge s is designed as a panel version to match the votronic modular system and fits perfectly with other votronic indicators (uniform height 85 mm). of course, it is also possible to retrofit a single indicator in the vehicle. Small front panel dimensions and the particularly low installation depth of only 18 mm allow installation in almost any position. The display is protected against incorrect polarity and overload and is easy to connect via screw terminals on the rear of the device. key product features of the waste water tank indicator s, 5313 suitable for 12v and 24v dc operating voltage low current consumption: only 1 - 30 ma Test mark: E-testing, (EMC/vehicle directive) Panel dimensions WxHxD: 47 x 85 x 20 mm Installation dimension: 29 x 63 x 18 mm at the push of a button, can be switched on and off high display resolution of the tank level thanks to 10-step display suitable for the Votronic module system can also be operated with 2 tank gauges The indicators can also be assigned with 2 tanks each (e.g. indoor/outdoor tank, summer/winter operation, additional tank, etc.). Single switches 2xUM are suitable for the changeover, e.g. switch panel 16 a s art. no. 1289 or switch panel 2x16 a s art. no. 1291 compatible with many Votronic tank sensors Tank electrode 12-24 k, 5543 tank electrode 15-50 k, 5545 tank electrode 20 k-wc, 5555 tank sensor fl, 5530 tank sensor 30-110 K-fl, 5551 Scope of delivery: 1x Votronic 5313 waste water tank gauge s 1x set of mounting screws 1x drilling template 1x instruction manual
€45.64*
The wastewater tank gauge s from Votronic (mpn 5313) has been designed for accurate level measurement and can be used for all tank materials and tank ...
The wastewater tank gauge s from Votronic (mpn 5313) has been designed for accurate level measurement and can be used for all tank materials and tank sizes. The visualization of the tank level is done by a 3 color scalar, based on 10 light emitting diodes, each representing 10% of the tank content. The display works steplessly, as intermediate levels are displayed with variable brightness and thus also tendencies are immediately recognizable The wastewater tank gauge tank gauge s is designed as a panel version to match the votronic modular system and fits perfectly with other votronic indicators (uniform height 85 mm). of course, it is also possible to retrofit a single indicator in the vehicle. Small front panel dimensions and the particularly low installation depth of only 18 mm allow installation in almost any position. The display is protected against incorrect polarity and overload and is easy to connect via screw terminals on the rear of the device. key product features of the waste water tank indicator s, 5313 suitable for 12v and 24v dc operating voltage low current consumption: only 1 - 30 ma Test mark: E-testing, (EMC/vehicle directive) Panel dimensions WxHxD: 47 x 85 x 20 mm Installation dimension: 29 x 63 x 18 mm at the push of a button, can be switched on and off high display resolution of the tank level thanks to 10-step display suitable for the Votronic module system can also be operated with 2 tank gauges The indicators can also be assigned with 2 tanks each (e.g. indoor/outdoor tank, summer/winter operation, additional tank, etc.). Single switches 2xUM are suitable for the changeover, e.g. switch panel 16 a s art. no. 1289 or switch panel 2x16 a s art. no. 1291 compatible with many Votronic tank sensors Tank electrode 12-24 k, 5543 tank electrode 15-50 k, 5545 tank electrode 20 k-wc, 5555 tank sensor fl, 5530 tank sensor 30-110 K-fl, 5551 Scope of delivery: 1x Votronic 5313 waste water tank gauge s 1x set of mounting screws 1x drilling template 1x instruction manual
The fecal tank gauge s from Votronic (mpn 5315) has been designed for accurate level measurement and can be used equally for all tank materials and tank sizes. The visualization of the tank level is carried out via a 3-color color scale, which is displayed on 10 light-emitting diodes, each representing 10% of the tank content. The display works steplessly, as intermediate levels are displayed with variable brightness and thus tendencies can be recognized immediately The fecal tank display tank display s is designed as a panel version to match the votronic modular system and fits perfectly with other votronic display units (uniform height 85 mm). of course, it is also possible to retrofit a single display in the vehicle. Small front panel dimensions and the particularly low installation depth of only 18 mm allow installation in almost any position. The display is protected against incorrect polarity and overload and is easy to connect via screw terminals on the rear of the device key product features of the fecal tank indicator s, 5315 suitable for 12v and 24v dc operating voltage low current consumption: only 1 - 30 ma Test mark: E-testing, (EMC/vehicle directive) Panel dimensions WxHxD: 47 x 85 x 20 mm Installation dimension: 29 x 63 x 18 mm at the push of a button, can be switched on and off high display resolution of the tank level thanks to 10-step display suitable for the Votronic module system can also be operated with 2 tank gauges The indicators can also be assigned with 2 tanks each (e.g. indoor/outdoor tank, summer/winter operation, additional tank, etc.). Single switches 2xUM are suitable for the changeover, e.g. switch panel 16 a s art. no. 1289 or switch panel 2x16 a s art. no. 1291 compatible with many Votronic tank sensors Tank electrode 12-24 k, 5543 tank electrode 15-50 k, 5545 tank electrode 20 k-wc, 5555 tank sensor fl, 5530 tank sensor 30-110 K-fl, 5551 Scope of delivery: 1x Votronic 5315 fecal tank indicator s1x set of fixing screws1x drilling template1x instruction manual
€49.86*
The fecal tank gauge s from Votronic (mpn 5315) has been designed for accurate level measurement and can be used equally for all tank materials and ta...
The fecal tank gauge s from Votronic (mpn 5315) has been designed for accurate level measurement and can be used equally for all tank materials and tank sizes. The visualization of the tank level is carried out via a 3-color color scale, which is displayed on 10 light-emitting diodes, each representing 10% of the tank content. The display works steplessly, as intermediate levels are displayed with variable brightness and thus tendencies can be recognized immediately The fecal tank display tank display s is designed as a panel version to match the votronic modular system and fits perfectly with other votronic display units (uniform height 85 mm). of course, it is also possible to retrofit a single display in the vehicle. Small front panel dimensions and the particularly low installation depth of only 18 mm allow installation in almost any position. The display is protected against incorrect polarity and overload and is easy to connect via screw terminals on the rear of the device key product features of the fecal tank indicator s, 5315 suitable for 12v and 24v dc operating voltage low current consumption: only 1 - 30 ma Test mark: E-testing, (EMC/vehicle directive) Panel dimensions WxHxD: 47 x 85 x 20 mm Installation dimension: 29 x 63 x 18 mm at the push of a button, can be switched on and off high display resolution of the tank level thanks to 10-step display suitable for the Votronic module system can also be operated with 2 tank gauges The indicators can also be assigned with 2 tanks each (e.g. indoor/outdoor tank, summer/winter operation, additional tank, etc.). Single switches 2xUM are suitable for the changeover, e.g. switch panel 16 a s art. no. 1289 or switch panel 2x16 a s art. no. 1291 compatible with many Votronic tank sensors Tank electrode 12-24 k, 5543 tank electrode 15-50 k, 5545 tank electrode 20 k-wc, 5555 tank sensor fl, 5530 tank sensor 30-110 K-fl, 5551 Scope of delivery: 1x Votronic 5315 fecal tank indicator s1x set of fixing screws1x drilling template1x instruction manual
Votronic 5747 vpc Power Control Jupiter 100 combines solar computer, battery computer and water management and many other functionalities in one device max. battery current 100a, can be used for 12v and 24v LCD display with numerous display options the control center for the entire power and water management
€329.58*
Votronic 5747 vpc Power Control Jupiter 100 combines solar computer, battery computer and water management and many other functionalities in one devic...
Votronic 5747 vpc Power Control Jupiter 100 combines solar computer, battery computer and water management and many other functionalities in one device max. battery current 100a, can be used for 12v and 24v LCD display with numerous display options the control center for the entire power and water management
The Start Alarm 124 from Votronic (mpn 0161) is a warning device with acoustic (beeper) and visual (led) alarm signal for the starter battery in vehicles with only one battery circuit (according to din en 1789, section 4.3.2). It is intended to warn the vehicle driver in good time of a battery that can no longer be started. An additional signal horn, consumer relay or similar can be connected via a switching output (pnp, positive output max. 0.5 a). The self-consumption is less than 3 mA (according to din en 13976). Connection via plug-in screw terminal. essential product features for 12v and 24v battery voltage max. switching current 0,5A Switching threshold undervoltage: 11.5v for 12v or 23v for 24v battery voltage Switching threshold overvoltage: 12.5v at 12v resp. 25v at 24v battery voltage Dimensions without connectors: 70 x 36 x 17 mm weighs only 30 grams Scope of delivery: 1x Votronic 0161 Start Alarm 124 1x Instruction manual
€51.38*
The Start Alarm 124 from Votronic (mpn 0161) is a warning device with acoustic (beeper) and visual (led) alarm signal for the starter battery in vehic...
The Start Alarm 124 from Votronic (mpn 0161) is a warning device with acoustic (beeper) and visual (led) alarm signal for the starter battery in vehicles with only one battery circuit (according to din en 1789, section 4.3.2). It is intended to warn the vehicle driver in good time of a battery that can no longer be started. An additional signal horn, consumer relay or similar can be connected via a switching output (pnp, positive output max. 0.5 a). The self-consumption is less than 3 mA (according to din en 13976). Connection via plug-in screw terminal. essential product features for 12v and 24v battery voltage max. switching current 0,5A Switching threshold undervoltage: 11.5v for 12v or 23v for 24v battery voltage Switching threshold overvoltage: 12.5v at 12v resp. 25v at 24v battery voltage Dimensions without connectors: 70 x 36 x 17 mm weighs only 30 grams Scope of delivery: 1x Votronic 0161 Start Alarm 124 1x Instruction manual
The votronic 5749 vpc Power Control Jupiter 100 belongs to an innovative series of combination panels that have been specially developed for installation in motor homes. It combines the functions of the models Merkur 5744 and Terra 5741 and also has a lot more to offer because it combines solar computer, battery computer and water management in one device. The 400 is the largest version of the new multi-panel series of votronic. from the variant 200 and 100 it differs only by the maximum battery current, which can be measured with the Jupiter panel. currently, the Jupiter series is the benchmark of all measuring and display devices in the motorhome sector. No other panel offers such a wide range of functions, measurement and display options. compared to the individual purchase of all included devices, Jupiter is also significantly cheaper. integrated solar computer The solar computer of the Jupiter combi panel is equivalent in performance and function to the solar computer s. The Solaranzeige is compatible with most votronic charge controllers and the Triple series. It shows, among other things, the current solar power in w, the current solar current in a , the charged solar capacity in ah and the charged solar energy in kWh. The Solar Computer gives a comprehensive picture of the current performance of your RV Solaranlage. integrated battery computer incl. smart shunt and ground strap En corresponds to the single device battery computer 400 S (manufacturer number 1269), which is also available as 200 and 100a version. The votronic battery computer provides a comprehensive impression of the condition of your starter and board battery and offers numerous functions. Microprocessor-controlled, the following values are measured, calculated and displayed: max. battery current: 400a Battery voltage board battery 7 to 32 v (volt). internal measuring resolution 0.1 v Allows conclusions to be drawn about the battery behavior under different loads and is used to check the function of e.g. the charger, solar system, alternator etc. flashing warning display in the event of overvoltage Battery current (charge/discharge) +/- 0 to max. +/- 1800 a, internal measuring resolution 0.1 a Control of discharge currents (load) by consumers, indicated by "-" sign Sign, control of charging currents, indicated by a "Charge" sign Battery capacity (ah and %) Remaining charge from 0 ah / 0% (empty) to nominal capacity max. 2000 ah / 100% (full) Battery voltage 2nd battery (e.g. start battery), 7 to 32 v (volt), internal measuring resolution 0.1 v Switching output freely programmable and scannable (pnp, plus potential 12v / 24v, max. 0,5a) incl. residual running indication integrated level indicator for water tanks The third important highlight of the Jupiter 100 is the level indicator for the fresh and waste water tank. Together with the 16a switch for the fresh water pump, the water management can also be realized via the Jupiter combination panel. other important features Voltage display for the starter battery Potential-free switching output for an external relay with freely programmable switching thresholds (% residual capacity) as deep discharge protection and as main switch Indoor and outdoor thermometer incl. 1 indoor and 1 outdoor sensor Clock in 24-hour format Double USB charging socket (5 v/2.5 a) Simple, intuitive operation important technical data Simple, intuitive operation compact, easy mounting low installation depth, low power consumption for 12 v or 24 v batteries dimensions display: 200x65x30 mm Mounting dimensions: 185x57x24 mm Weight without smart shunt: only 200g Scope of delivery:1x votronic 5749 vpc Jupiter 400 Multi-Panel1x user manual1x temperature sensor for indoor1x temperature sensor for outside1x Smart-Messshunt for the connection of the battery computer2x 5m connection cables1x ground strap adjusted to the power of the battery computer
€388.81*
€391.90*(0.79% saved)
The votronic 5749 vpc Power Control Jupiter 100 belongs to an innovative series of combination panels that have been specially developed for installat...
The votronic 5749 vpc Power Control Jupiter 100 belongs to an innovative series of combination panels that have been specially developed for installation in motor homes. It combines the functions of the models Merkur 5744 and Terra 5741 and also has a lot more to offer because it combines solar computer, battery computer and water management in one device. The 400 is the largest version of the new multi-panel series of votronic. from the variant 200 and 100 it differs only by the maximum battery current, which can be measured with the Jupiter panel. currently, the Jupiter series is the benchmark of all measuring and display devices in the motorhome sector. No other panel offers such a wide range of functions, measurement and display options. compared to the individual purchase of all included devices, Jupiter is also significantly cheaper. integrated solar computer The solar computer of the Jupiter combi panel is equivalent in performance and function to the solar computer s. The Solaranzeige is compatible with most votronic charge controllers and the Triple series. It shows, among other things, the current solar power in w, the current solar current in a , the charged solar capacity in ah and the charged solar energy in kWh. The Solar Computer gives a comprehensive picture of the current performance of your RV Solaranlage. integrated battery computer incl. smart shunt and ground strap En corresponds to the single device battery computer 400 S (manufacturer number 1269), which is also available as 200 and 100a version. The votronic battery computer provides a comprehensive impression of the condition of your starter and board battery and offers numerous functions. Microprocessor-controlled, the following values are measured, calculated and displayed: max. battery current: 400a Battery voltage board battery 7 to 32 v (volt). internal measuring resolution 0.1 v Allows conclusions to be drawn about the battery behavior under different loads and is used to check the function of e.g. the charger, solar system, alternator etc. flashing warning display in the event of overvoltage Battery current (charge/discharge) +/- 0 to max. +/- 1800 a, internal measuring resolution 0.1 a Control of discharge currents (load) by consumers, indicated by "-" sign Sign, control of charging currents, indicated by a "Charge" sign Battery capacity (ah and %) Remaining charge from 0 ah / 0% (empty) to nominal capacity max. 2000 ah / 100% (full) Battery voltage 2nd battery (e.g. start battery), 7 to 32 v (volt), internal measuring resolution 0.1 v Switching output freely programmable and scannable (pnp, plus potential 12v / 24v, max. 0,5a) incl. residual running indication integrated level indicator for water tanks The third important highlight of the Jupiter 100 is the level indicator for the fresh and waste water tank. Together with the 16a switch for the fresh water pump, the water management can also be realized via the Jupiter combination panel. other important features Voltage display for the starter battery Potential-free switching output for an external relay with freely programmable switching thresholds (% residual capacity) as deep discharge protection and as main switch Indoor and outdoor thermometer incl. 1 indoor and 1 outdoor sensor Clock in 24-hour format Double USB charging socket (5 v/2.5 a) Simple, intuitive operation important technical data Simple, intuitive operation compact, easy mounting low installation depth, low power consumption for 12 v or 24 v batteries dimensions display: 200x65x30 mm Mounting dimensions: 185x57x24 mm Weight without smart shunt: only 200g Scope of delivery:1x votronic 5749 vpc Jupiter 400 Multi-Panel1x user manual1x temperature sensor for indoor1x temperature sensor for outside1x Smart-Messshunt for the connection of the battery computer2x 5m connection cables1x ground strap adjusted to the power of the battery computer
The Votronic tank electrode 20 k-wc (han 5555) is a tank sensor for cassette toilets in motorhomes which are now considered the absolute standard. Cassette toilets are compactly designed and have an indicator, but unfortunately this usually only marks the full state. Once this is reached, the toilet can no longer be used in the vehicle. The use of tank gauges in combination with Votronic level indicators allows you to plan ahead for the disposal and renewal of your mobile tanks. the essential product features of the 20 k-wc tank transmitter Tank transmitter specially designed for cassette toilets and mobile tanks Compact, robust, waterproof (ip67) Easy mounting, no revision opening required with 3-pole round plug connection to disconnect the tank complete mounting material included in delivery Rod electrode, easy to shorten to tank height Installation diameter 38 mm (or pg 29 thread) Flange diameter 46.5 mm Mark of conformity: E-testing (EMC/vehicle directive) Connection cable 75 cm long Mounting from above by means of mounting ring Detachable plug connection for tank emptying optimal in combination with Votronic level indicators The tank sender is compatible with the following Votronic indicators: . Waste water indicator s, 5313 Holding tank indicator s, 5315 Info Panel Pro, 5330 Info Panel Pro 24V VPC Terra VPC Mercury VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749 solid measurement technology and simple mounting The tank electrode 20 k-wc has been further developed on the basis of the long-proven tank electrode to provide a fully-fledged level indicator especially for use in cassette toilets. The compact design makes it possible to simply screw the tank sensor into the WC cassette from above using the mounting ring supplied. The 38 mm diameter mounting hole required for this can be easily made with a hole saw. The fully potted electronics are designed to be waterproof (ip67) and suitable for rough operation when flushing the WC cassette. To change the cassette, the 20 k-wc tank electrode is disconnected from the vehicle via a solid 3-pin round plug and the plug is fixed to the cassette. In addition to the 3-pin round plug connection, the scope of delivery also includes a mounting ring and the complete mounting material. Scope of delivery: 1x Votronic 5555 Tank electrode 20 k-wc
€106.56*
The Votronic tank electrode 20 k-wc (han 5555) is a tank sensor for cassette toilets in motorhomes which are now considered the absolute standard. Cas...
The Votronic tank electrode 20 k-wc (han 5555) is a tank sensor for cassette toilets in motorhomes which are now considered the absolute standard. Cassette toilets are compactly designed and have an indicator, but unfortunately this usually only marks the full state. Once this is reached, the toilet can no longer be used in the vehicle. The use of tank gauges in combination with Votronic level indicators allows you to plan ahead for the disposal and renewal of your mobile tanks. the essential product features of the 20 k-wc tank transmitter Tank transmitter specially designed for cassette toilets and mobile tanks Compact, robust, waterproof (ip67) Easy mounting, no revision opening required with 3-pole round plug connection to disconnect the tank complete mounting material included in delivery Rod electrode, easy to shorten to tank height Installation diameter 38 mm (or pg 29 thread) Flange diameter 46.5 mm Mark of conformity: E-testing (EMC/vehicle directive) Connection cable 75 cm long Mounting from above by means of mounting ring Detachable plug connection for tank emptying optimal in combination with Votronic level indicators The tank sender is compatible with the following Votronic indicators: . Waste water indicator s, 5313 Holding tank indicator s, 5315 Info Panel Pro, 5330 Info Panel Pro 24V VPC Terra VPC Mercury VPC Jupiter 100 Smart Shunt, 5747 VPC Jupiter 200 Smart Shunt, 5748 VPC Jupiter 400 Smart Shunt, 5749 solid measurement technology and simple mounting The tank electrode 20 k-wc has been further developed on the basis of the long-proven tank electrode to provide a fully-fledged level indicator especially for use in cassette toilets. The compact design makes it possible to simply screw the tank sensor into the WC cassette from above using the mounting ring supplied. The 38 mm diameter mounting hole required for this can be easily made with a hole saw. The fully potted electronics are designed to be waterproof (ip67) and suitable for rough operation when flushing the WC cassette. To change the cassette, the 20 k-wc tank electrode is disconnected from the vehicle via a solid 3-pin round plug and the plug is fixed to the cassette. In addition to the 3-pin round plug connection, the scope of delivery also includes a mounting ring and the complete mounting material. Scope of delivery: 1x Votronic 5555 Tank electrode 20 k-wc
The votronic 5748 vpc Power Control Jupiter 200 belongs to an innovative series of combination panels that have been specially developed for installation in the motor home. It combines the functions of the models Merkur 5744 and Terra 5741 and also has a lot more to offer because he combines solar computer, battery computer and water management in just one device. The 200 is the second most powerful version of the new multi-panel series of votronic. from the variant 100 and 400 it differs only by the maximum battery current, which can be measured Jupiter panel and the supplied smart shunt + ground strap. from the FUnktionsumfang the three devices are identical. currently, the Jupiter series is the measure of all things among the measuring and display devices in the motorhome sector. No other panel offers such a wide range of functions, measurement and display options. compared to the individual purchase of all included devices, Jupiter is also significantly cheaper. integrated solar computer The solar computer of the Jupiter combi panel is equivalent in performance and function to the solar computer s. The Solaranzeige is compatible with most votronic charge controllers and the Triple series. It shows, among other things, the current solar power in w, the current solar current in a , the charged solar capacity in ah and the charged solar energy in kWh. The Solar Computer gives a comprehensive picture of the current performance of your RV Solaranlage. integrated battery computer incl. smart shunt and ground strap En corresponds to the single device battery computer 200 S, which is also available as 100 and 400a version. The votronic battery computer provides a comprehensive impression of the condition of your starter and board battery and offers numerous functions. Microprocessor-controlled, the following values are measured, calculated and displayed: max. battery current: 200a Battery voltage board battery 7 to 32 v (volt). internal measuring resolution 0.1 v Allows conclusions to be drawn about the battery behavior under different loads and is used to check the function of e.g. the charger, solar system, alternator etc. flashing warning display in the event of overvoltage Battery current (charge/discharge) +/- 0 to max. +/- 1800 a, internal measuring resolution 0.1 a Control of discharge currents (load) by consumers, indicated by "-" sign Sign, control of charging currents, indicated by a "Charge" sign Battery capacity (ah and %) Remaining charge from 0 ah / 0% (empty) to nominal capacity max. 2000 ah / 100% (full) Battery voltage 2nd battery (e.g. start battery), 7 to 32 v (volt), internal measuring resolution 0.1 v Switching output freely programmable and scannable (pnp, plus potential 12v / 24v, max. 0,5a) incl. residual running indication integrated level indicator for water tanks The third important highlight of the Jupiter 200 is the level indicator for the fresh and waste water tank. Together with the 16a switch for the fresh water pump, the water management can also be realized via the Jupiter combi panel. other important features Voltage display for the starter battery Potential-free switching output for an external relay with freely programmable switching thresholds (% residual capacity) as deep discharge protection and as main switch Indoor and outdoor thermometer incl. 1 indoor and 1 outdoor sensor Clock in 24-hour format Double USB charging socket (5 v/2.5 a) Simple, intuitive operation important technical data Simple, intuitive operation specially developed for use in motorhomes and caravans compact, easy installation low installation depth, low power consumption for 12 v or 24 volt batteries dimensions display: 200x65x30 mm Installation dimensions: 185x57x24 mm Weight without smart shunt: only 200g high quality technology made in Germany Scope of delivery:1x votronic 5748 vpc Jupiter 200 Multi-Panel1x user manual1x temperature sensor for indoor1x temperature sensor for outside1x Smart-Messshunt for the connection of the battery computer2x 5m connection cables (stereo cables)1x ground strap 35mm for measuring shunt connection
€352.72*
The votronic 5748 vpc Power Control Jupiter 200 belongs to an innovative series of combination panels that have been specially developed for installat...
The votronic 5748 vpc Power Control Jupiter 200 belongs to an innovative series of combination panels that have been specially developed for installation in the motor home. It combines the functions of the models Merkur 5744 and Terra 5741 and also has a lot more to offer because he combines solar computer, battery computer and water management in just one device. The 200 is the second most powerful version of the new multi-panel series of votronic. from the variant 100 and 400 it differs only by the maximum battery current, which can be measured Jupiter panel and the supplied smart shunt + ground strap. from the FUnktionsumfang the three devices are identical. currently, the Jupiter series is the measure of all things among the measuring and display devices in the motorhome sector. No other panel offers such a wide range of functions, measurement and display options. compared to the individual purchase of all included devices, Jupiter is also significantly cheaper. integrated solar computer The solar computer of the Jupiter combi panel is equivalent in performance and function to the solar computer s. The Solaranzeige is compatible with most votronic charge controllers and the Triple series. It shows, among other things, the current solar power in w, the current solar current in a , the charged solar capacity in ah and the charged solar energy in kWh. The Solar Computer gives a comprehensive picture of the current performance of your RV Solaranlage. integrated battery computer incl. smart shunt and ground strap En corresponds to the single device battery computer 200 S, which is also available as 100 and 400a version. The votronic battery computer provides a comprehensive impression of the condition of your starter and board battery and offers numerous functions. Microprocessor-controlled, the following values are measured, calculated and displayed: max. battery current: 200a Battery voltage board battery 7 to 32 v (volt). internal measuring resolution 0.1 v Allows conclusions to be drawn about the battery behavior under different loads and is used to check the function of e.g. the charger, solar system, alternator etc. flashing warning display in the event of overvoltage Battery current (charge/discharge) +/- 0 to max. +/- 1800 a, internal measuring resolution 0.1 a Control of discharge currents (load) by consumers, indicated by "-" sign Sign, control of charging currents, indicated by a "Charge" sign Battery capacity (ah and %) Remaining charge from 0 ah / 0% (empty) to nominal capacity max. 2000 ah / 100% (full) Battery voltage 2nd battery (e.g. start battery), 7 to 32 v (volt), internal measuring resolution 0.1 v Switching output freely programmable and scannable (pnp, plus potential 12v / 24v, max. 0,5a) incl. residual running indication integrated level indicator for water tanks The third important highlight of the Jupiter 200 is the level indicator for the fresh and waste water tank. Together with the 16a switch for the fresh water pump, the water management can also be realized via the Jupiter combi panel. other important features Voltage display for the starter battery Potential-free switching output for an external relay with freely programmable switching thresholds (% residual capacity) as deep discharge protection and as main switch Indoor and outdoor thermometer incl. 1 indoor and 1 outdoor sensor Clock in 24-hour format Double USB charging socket (5 v/2.5 a) Simple, intuitive operation important technical data Simple, intuitive operation specially developed for use in motorhomes and caravans compact, easy installation low installation depth, low power consumption for 12 v or 24 volt batteries dimensions display: 200x65x30 mm Installation dimensions: 185x57x24 mm Weight without smart shunt: only 200g high quality technology made in Germany Scope of delivery:1x votronic 5748 vpc Jupiter 200 Multi-Panel1x user manual1x temperature sensor for indoor1x temperature sensor for outside1x Smart-Messshunt for the connection of the battery computer2x 5m connection cables (stereo cables)1x ground strap 35mm for measuring shunt connection
he Votronic Power Control (VPC) Terra Multi-Panel (MPN 5741) is an innovative monitoring and control panel especially designed for campers and caravans.Its bright display provides the most important data about your system and allows various setting options.
High-end technology, rigid construction form and modern design are typical characteristics of the Info Panel Pro series.Self-explaining symbols allow intuitive operation. Thanks to their size the displayed values are recognizable even from greater distance and with varying lighting conditions.The current function is displayed by several LEDs.
Important details:
displays voltage (V) of on-board and starter battery with integrated undervoltage protection for on-board battery
main switch for on-board power supply via switching output 1A (e.g. Switch Unit 40 or Switch Unit 100)
filling level indication in % for fresh water and waste water tank
switch for fresh water pump max. 16A (potential-free output)
current solar performance in W
current solar current in A
solar capacity feed in Ah
solar energy feed in kWh
compatible with all Votronic solar charge controllers since 2014
€183.51*
he Votronic Power Control (VPC) Terra Multi-Panel (MPN 5741) is an innovative monitoring and control panel especially designed for campers and caravan...
he Votronic Power Control (VPC) Terra Multi-Panel (MPN 5741) is an innovative monitoring and control panel especially designed for campers and caravans.Its bright display provides the most important data about your system and allows various setting options.
High-end technology, rigid construction form and modern design are typical characteristics of the Info Panel Pro series.Self-explaining symbols allow intuitive operation. Thanks to their size the displayed values are recognizable even from greater distance and with varying lighting conditions.The current function is displayed by several LEDs.
Important details:
displays voltage (V) of on-board and starter battery with integrated undervoltage protection for on-board battery
main switch for on-board power supply via switching output 1A (e.g. Switch Unit 40 or Switch Unit 100)
filling level indication in % for fresh water and waste water tank
switch for fresh water pump max. 16A (potential-free output)
current solar performance in W
current solar current in A
solar capacity feed in Ah
solar energy feed in kWh
compatible with all Votronic solar charge controllers since 2014
The vac Triple 60-15/30 Battery Charger from votronic (mpn 0665) consists of a 45a vac mains charger and a 60a vcc charge converter including Battery Trainer. Compared to the vbcs Triple, an intelligent charge current distributor has been integrated instead of the integrated MPP solar charge controller. this distributes the charge current of the mains charger and supplies the starter battery with a charge current of 15a solid power supply for starter and supply batteries in this way, higher loads on the starter battery (entertainment, blue light, siren, etc.) can be buffered and the vehicle's starting ability permanently guaranteed. If the high charging current at the starter battery is no longer required, the charging current distributor also makes this available to the on-board battery key product features of the vac-60-15/30 Triple Same as vbcs Triple series but without MPP solar charge controller votronic part number 0665 instead with intelligent 15a charge current distributor Integrated vcc charge converter (battery to battery) with 60a Integrated battery trainer for life-extending care of your valuable batteries Integrated vac mains charger with a max. charging power of 45a Charging current distributor provides high charging current 12 v / 15a for fast charging of the starter battery and supply of the 12 v consumers connected to it during mains charging including charge maintenance for long periods of use and integrated module for battery care significant price advantage compared to purchasing the integrated components individually offers charging options for both supply and starter batteries Electronics moisture-proof can charge all common battery types, including lithium batteries The Triple units have charging programs for lead-acid, gel and aGM batteries and also 4 charging programs for lithium batteries, including a control input for connecting a LiFEPO4 battery management system (bms). massive price advantage compared to buying the components individually The generous features of the vac Triple units guarantee you a solid saving compared to buying all the integrated components individually. optional LCD remote control panel available If you also want to have full control and overview of your energy system in the cockpit, you should take a look at the optional votronic 1247 LCD Charge Control s. It can display all the essential information of the vac triple and is formatted to match the rest of the built-in panel program from votronic. Scope of delivery: 1x votronic 0665 vac 60-15/30 Triple Battery Charger 1x user manual
€957.87*
The vac Triple 60-15/30 Battery Charger from votronic (mpn 0665) consists of a 45a vac mains charger and a 60a vcc charge converter including Battery ...
The vac Triple 60-15/30 Battery Charger from votronic (mpn 0665) consists of a 45a vac mains charger and a 60a vcc charge converter including Battery Trainer. Compared to the vbcs Triple, an intelligent charge current distributor has been integrated instead of the integrated MPP solar charge controller. this distributes the charge current of the mains charger and supplies the starter battery with a charge current of 15a solid power supply for starter and supply batteries in this way, higher loads on the starter battery (entertainment, blue light, siren, etc.) can be buffered and the vehicle's starting ability permanently guaranteed. If the high charging current at the starter battery is no longer required, the charging current distributor also makes this available to the on-board battery key product features of the vac-60-15/30 Triple Same as vbcs Triple series but without MPP solar charge controller votronic part number 0665 instead with intelligent 15a charge current distributor Integrated vcc charge converter (battery to battery) with 60a Integrated battery trainer for life-extending care of your valuable batteries Integrated vac mains charger with a max. charging power of 45a Charging current distributor provides high charging current 12 v / 15a for fast charging of the starter battery and supply of the 12 v consumers connected to it during mains charging including charge maintenance for long periods of use and integrated module for battery care significant price advantage compared to purchasing the integrated components individually offers charging options for both supply and starter batteries Electronics moisture-proof can charge all common battery types, including lithium batteries The Triple units have charging programs for lead-acid, gel and aGM batteries and also 4 charging programs for lithium batteries, including a control input for connecting a LiFEPO4 battery management system (bms). massive price advantage compared to buying the components individually The generous features of the vac Triple units guarantee you a solid saving compared to buying all the integrated components individually. optional LCD remote control panel available If you also want to have full control and overview of your energy system in the cockpit, you should take a look at the optional votronic 1247 LCD Charge Control s. It can display all the essential information of the vac triple and is formatted to match the rest of the built-in panel program from votronic. Scope of delivery: 1x votronic 0665 vac 60-15/30 Triple Battery Charger 1x user manual
Der Tank Sensor FW 120 von Votronic (MPN 0256) wurde speziell für die Füllstandmessung hergestellt und liefert nominierte Signale im Bereich von 0-10V oder 4-20mA, die nahtlos mit kompatiblem Anzeige- und Auswertegeräten arbeiten. Der Sensor verfügt über keinerlei mechanisch bewegte Komponenten und ist dadurch mit jedem Tankmaterial kompatibel. Entweder du montierst ihn oben auf dem Tank oder in dessen nähe. Die Messung im Tank erfolgt dann mithilfe einer flexiblen Mess-Sonde.
Über den Tank Sensor
Für 12V und 24V Batteriespannung
Einfache Montage
Anpassung an die Tankhöhe
Umschaltbares Normsignal
Anschlusskabel über PG-Verschraubung
Für Tankhöhen von 40-120 cm
Für Tankhöhen von 80-240 cm ist dieser Tank-Sensor perfekt für dich: Votronic 0258 FW 240 Tank Sensor
Ausgiebiger Schutz vor
Verpolung
Überspannung
Überlastung
Kurzschluss
Schutzart: IP67
Technische Daten
Batterie-Spannung: 12 und 24V
Stromaufnahme Maximal: 30 mA
Signal-Ausgang: 0-10 V & 4-20 mA
Tankhöhe: 40-120 cm
Temperaturbereich: -20°C - +60°C
Abmessungen: 98 x 64 x 38 mm
Gewicht: 180 g
Neben der sehr vorteilhaften Privatnutzung wurde der Sensor ebenso für den rauen Einsatz in Feuerwehrfahrzeugen konzipiert.
Lieferumfang:
1x Victron Tank Sensor FW 120
1x "Probe"-Spezial-Leitung komplett mit Abspann-Öse (ca. 1,5m)
1x Montage- und Bedienungsanleitung
€117.89*
Der Tank Sensor FW 120 von Votronic (MPN 0256) wurde speziell für die Füllstandmessung hergestellt und liefert nominierte Signale im Bereich...
Der Tank Sensor FW 120 von Votronic (MPN 0256) wurde speziell für die Füllstandmessung hergestellt und liefert nominierte Signale im Bereich von 0-10V oder 4-20mA, die nahtlos mit kompatiblem Anzeige- und Auswertegeräten arbeiten. Der Sensor verfügt über keinerlei mechanisch bewegte Komponenten und ist dadurch mit jedem Tankmaterial kompatibel. Entweder du montierst ihn oben auf dem Tank oder in dessen nähe. Die Messung im Tank erfolgt dann mithilfe einer flexiblen Mess-Sonde.
Über den Tank Sensor
Für 12V und 24V Batteriespannung
Einfache Montage
Anpassung an die Tankhöhe
Umschaltbares Normsignal
Anschlusskabel über PG-Verschraubung
Für Tankhöhen von 40-120 cm
Für Tankhöhen von 80-240 cm ist dieser Tank-Sensor perfekt für dich: Votronic 0258 FW 240 Tank Sensor
Ausgiebiger Schutz vor
Verpolung
Überspannung
Überlastung
Kurzschluss
Schutzart: IP67
Technische Daten
Batterie-Spannung: 12 und 24V
Stromaufnahme Maximal: 30 mA
Signal-Ausgang: 0-10 V & 4-20 mA
Tankhöhe: 40-120 cm
Temperaturbereich: -20°C - +60°C
Abmessungen: 98 x 64 x 38 mm
Gewicht: 180 g
Neben der sehr vorteilhaften Privatnutzung wurde der Sensor ebenso für den rauen Einsatz in Feuerwehrfahrzeugen konzipiert.
Lieferumfang:
1x Victron Tank Sensor FW 120
1x "Probe"-Spezial-Leitung komplett mit Abspann-Öse (ca. 1,5m)
1x Montage- und Bedienungsanleitung
The Votronic Pictograph Film (MPN 2112) allows the proper labeling of your fuse and switch panels.It is transparent, self-adhesive and abrasion-proof with an imprint matching to the design of the VOTRONIC front panels.Each pictograph has a size of 11x8mm. They are pre-cut and can be removed from the film easily.
€209.88*
The Votronic Pictograph Film (MPN 2112) allows the proper labeling of your fuse and switch panels.It is transparent, self-adhesive and abrasion-proof ...
The Votronic Pictograph Film (MPN 2112) allows the proper labeling of your fuse and switch panels.It is transparent, self-adhesive and abrasion-proof with an imprint matching to the design of the VOTRONIC front panels.Each pictograph has a size of 11x8mm. They are pre-cut and can be removed from the film easily.
Der Tank Sensor FW 240 von Votronic (MPN 0258) wurde speziell für die Füllstandmessung hergestellt und liefert nominierte Signale im Bereich von 0-10V oder 4-20mA, die nahtlos mit kompatiblem Anzeige- und Auswertegeräten arbeiten. Der Sensor verfügt über keinerlei mechanisch bewegte Komponenten und ist dadurch mit jedem Tankmaterial kompatibel. Entweder du montierst ihn oben auf dem Tank oder in dessen nähe. Die Messung im Tank erfolgt dann mithilfe einer flexiblen Mess-Sonde.
Über den Tank Sensor
Für 12V und 24V Batteriespannung
Einfache Montage
Anpassung an die Tankhöhe
Umschaltbares Normsignal
Anschlusskabel über PG-Verschraubung
Für Tankhöhen von 80-240 cm
Für Tankhöhen von 40-120 cm ist dieser Tank-Sensor perfekt für dich: Votronic 0256 FW 120 Tank Sensor
Ausgiebiger Schutz vor
Verpolung
Überspannung
Überlastung
Kurzschluss
Schutzart: IP67
Technische Daten
Batterie-Spannung: 12 und 24V
Stromaufnahme Maximal: 30 mA
Signal-Ausgang: 0-10 V & 4-20 mA
Tankhöhe: 80-240 cm
Temperaturbereich: -20°C - +60°C
Abmessungen: 98 x 64 x 38 mm
Gewicht: 180 g
Neben der sehr vorteilhaften Privatnutzung wurde der Sensor ebenso für den rauen Einsatz in Feuerwehrfahrzeugen konzipiert.
Lieferumfang:
1x Victron Tank Sensor FW 240
1x "Probe"-Spezial-Leitung komplett mit Abspann-Öse (ca. 1,5m)
1x Montage- und Bedienungsanleitung
€123.31*
Der Tank Sensor FW 240 von Votronic (MPN 0258) wurde speziell für die Füllstandmessung hergestellt und liefert nominierte Signale im Bereich...
Der Tank Sensor FW 240 von Votronic (MPN 0258) wurde speziell für die Füllstandmessung hergestellt und liefert nominierte Signale im Bereich von 0-10V oder 4-20mA, die nahtlos mit kompatiblem Anzeige- und Auswertegeräten arbeiten. Der Sensor verfügt über keinerlei mechanisch bewegte Komponenten und ist dadurch mit jedem Tankmaterial kompatibel. Entweder du montierst ihn oben auf dem Tank oder in dessen nähe. Die Messung im Tank erfolgt dann mithilfe einer flexiblen Mess-Sonde.
Über den Tank Sensor
Für 12V und 24V Batteriespannung
Einfache Montage
Anpassung an die Tankhöhe
Umschaltbares Normsignal
Anschlusskabel über PG-Verschraubung
Für Tankhöhen von 80-240 cm
Für Tankhöhen von 40-120 cm ist dieser Tank-Sensor perfekt für dich: Votronic 0256 FW 120 Tank Sensor
Ausgiebiger Schutz vor
Verpolung
Überspannung
Überlastung
Kurzschluss
Schutzart: IP67
Technische Daten
Batterie-Spannung: 12 und 24V
Stromaufnahme Maximal: 30 mA
Signal-Ausgang: 0-10 V & 4-20 mA
Tankhöhe: 80-240 cm
Temperaturbereich: -20°C - +60°C
Abmessungen: 98 x 64 x 38 mm
Gewicht: 180 g
Neben der sehr vorteilhaften Privatnutzung wurde der Sensor ebenso für den rauen Einsatz in Feuerwehrfahrzeugen konzipiert.
Lieferumfang:
1x Victron Tank Sensor FW 240
1x "Probe"-Spezial-Leitung komplett mit Abspann-Öse (ca. 1,5m)
1x Montage- und Bedienungsanleitung
Das LED Tank Display HE 420 (MPN 0244) von Votronic zeigt dir die genaue Füllmenge deines Tanks an. Durch die 3-farbig und mit 10 superhellen Leuchtdioden dargestellte Anzeige, lässt sich dein Füllstand problemlos nachvollziehen. Die Helligkeit wird dich dank eines integrierten Fotoelements nachts nicht blenden und tagsüber bei Sonneneinstrahlung dennoch gut sichtbar sein. Des Weiteren stellen die kompakte Bauweise und die flache Einbautiefe einen besonderen Vorteil dar. Durch die unkomplizierte Parallelschaltung von bis zu 4 LED-Tankanzeigen HE 010 lässt sich der Füllstand des Tanks an praktisch jeder Position im Fahrzeug überwachen.
Über das HE 10 LED Tank Display
Für 12V und 24V Batteriespannung
10 helligkeitsgesteuerte LED`s
3-farbig (rot, gelb, grün)
Kompakte Bauform
Geringe Einbautiefe
Anschlusskabel sind fest angeschlossen
Ausgiebiger Schutz
Wasserdicht vergossen
Vibrationsfest
Schutz vor Verpolung und Überspannung
Schutzart: IP67
Technische Daten
Batterie-Spannung: 12V und 24V (8,5V - 32V Bordspannung)
Stromaufnahme (max. Sonneneinstrahlung): 3-60 mA
Eingangs-Signal 0-100%: 4-20 mA
Eingangs-Widerstand: 150 kOhm
Abmessungen: 47 x 85 x 27 mm
Abmessungen (Eingebaut): 41 x 69 x 23 mm
Lagertemperaturbereich: -25°C - +60°C
Arbeitstemperaturbereich: -20°C - +45°C
Gewicht: 80 g
Neben der sehr vorteilhaften Privatnutzung wurde das Anzeigepanel ebenso für den rauen Einsatz in Feuerwehrfahrzeugen konzipiert.
Lieferumfang:
1x Votronic LED Tank Display HE 420
4x Befestigungsschrauben
1x Bedienungsanleitung
€136.98*
Das LED Tank Display HE 420 (MPN 0244) von Votronic zeigt dir die genaue Füllmenge deines Tanks an. Durch die 3-farbig und mit 10 superhelle...
Das LED Tank Display HE 420 (MPN 0244) von Votronic zeigt dir die genaue Füllmenge deines Tanks an. Durch die 3-farbig und mit 10 superhellen Leuchtdioden dargestellte Anzeige, lässt sich dein Füllstand problemlos nachvollziehen. Die Helligkeit wird dich dank eines integrierten Fotoelements nachts nicht blenden und tagsüber bei Sonneneinstrahlung dennoch gut sichtbar sein. Des Weiteren stellen die kompakte Bauweise und die flache Einbautiefe einen besonderen Vorteil dar. Durch die unkomplizierte Parallelschaltung von bis zu 4 LED-Tankanzeigen HE 010 lässt sich der Füllstand des Tanks an praktisch jeder Position im Fahrzeug überwachen.
Über das HE 10 LED Tank Display
Für 12V und 24V Batteriespannung
10 helligkeitsgesteuerte LED`s
3-farbig (rot, gelb, grün)
Kompakte Bauform
Geringe Einbautiefe
Anschlusskabel sind fest angeschlossen
Ausgiebiger Schutz
Wasserdicht vergossen
Vibrationsfest
Schutz vor Verpolung und Überspannung
Schutzart: IP67
Technische Daten
Batterie-Spannung: 12V und 24V (8,5V - 32V Bordspannung)
Stromaufnahme (max. Sonneneinstrahlung): 3-60 mA
Eingangs-Signal 0-100%: 4-20 mA
Eingangs-Widerstand: 150 kOhm
Abmessungen: 47 x 85 x 27 mm
Abmessungen (Eingebaut): 41 x 69 x 23 mm
Lagertemperaturbereich: -25°C - +60°C
Arbeitstemperaturbereich: -20°C - +45°C
Gewicht: 80 g
Neben der sehr vorteilhaften Privatnutzung wurde das Anzeigepanel ebenso für den rauen Einsatz in Feuerwehrfahrzeugen konzipiert.
Lieferumfang:
1x Votronic LED Tank Display HE 420
4x Befestigungsschrauben
1x Bedienungsanleitung
Das LED Tank Display HE 010 von Votronic zeigt dir die genaue Füllmenge deines Tanks an. Durch die 3-farbig und mit 10 superhellen Leuchtdioden dargestellte Anzeige, lässt sich dein Füllstand problemlos nachvollziehen. Die Helligkeit wird dich dank eines integrierten Fotoelements nachts nicht blenden und tagsüber bei Sonneneinstrahlung dennoch gut sichtbar sein. Des Weiteren stellen die kompakte Bauweise und die flache Einbautiefe einen besonderen Vorteil dar. Durch die unkomplizierte Parallelschaltung von bis zu 4 LED-Tankanzeigen HE 010 lässt sich der Füllstand von Wasser- oder Schautanks von praktisch jeder Position im Fahrzeug überwachen.
Über das HE 10 LED Tank Display
Für 12V und 24V Batteriespannung
10 helligkeitsgesteuerte LED`s
3-farbig (rot, gelb, grün)
Industrielles Normsignal 0...10V oder 4...20mA
Kompakte Bauform, geringe Einbautiefe
Parallelschaltung von bis zu 4 Geräten möglich
Anschlusskabel sind fest angeschlossen
Ausgiebiger Schutz
Wasserdicht vergossen
Vibrationsfest
Schutz vor Verpolung und Überspannung
Schutzart: IP67
Technische Daten
Batterie-Spannung: 12V und 24V (8,5V - 32V Bordspannung)
Stromaufnahme (max. Sonneneinstrahlung): 3-60 mA
Eingangs-Signal 0-100%: 0-10 V
Eingangs-Widerstand: 180 kOhm
Abmessungen: 47 x 85 x 27 mm
Einbau-Abmessungen: 41 x 69 x 23 mm
Lagertemperaturbereich: -25°C - +60°C
Arbeitstemperaturbereich: -20°C - +45°C
Gewicht: 80 g
Neben der sehr vorteilhaften Privatnutzung wurde das Anzeigepanel ebenso für den rauen Einsatz in Feuerwehrfahrzeugen konzipiert. Es ist ebenfalls der Einbau in Anzeigetafeln möglich.
Lieferumfang:
1x Votronic LED Tank Display HE 010
4x Befestigungsschrauben
1x Bedienungsanleitung
€127.57*
Das LED Tank Display HE 010 von Votronic zeigt dir die genaue Füllmenge deines Tanks an. Durch die 3-farbig und mit 10 superhellen Leuchtdioden d...
Das LED Tank Display HE 010 von Votronic zeigt dir die genaue Füllmenge deines Tanks an. Durch die 3-farbig und mit 10 superhellen Leuchtdioden dargestellte Anzeige, lässt sich dein Füllstand problemlos nachvollziehen. Die Helligkeit wird dich dank eines integrierten Fotoelements nachts nicht blenden und tagsüber bei Sonneneinstrahlung dennoch gut sichtbar sein. Des Weiteren stellen die kompakte Bauweise und die flache Einbautiefe einen besonderen Vorteil dar. Durch die unkomplizierte Parallelschaltung von bis zu 4 LED-Tankanzeigen HE 010 lässt sich der Füllstand von Wasser- oder Schautanks von praktisch jeder Position im Fahrzeug überwachen.
Über das HE 10 LED Tank Display
Für 12V und 24V Batteriespannung
10 helligkeitsgesteuerte LED`s
3-farbig (rot, gelb, grün)
Industrielles Normsignal 0...10V oder 4...20mA
Kompakte Bauform, geringe Einbautiefe
Parallelschaltung von bis zu 4 Geräten möglich
Anschlusskabel sind fest angeschlossen
Ausgiebiger Schutz
Wasserdicht vergossen
Vibrationsfest
Schutz vor Verpolung und Überspannung
Schutzart: IP67
Technische Daten
Batterie-Spannung: 12V und 24V (8,5V - 32V Bordspannung)
Stromaufnahme (max. Sonneneinstrahlung): 3-60 mA
Eingangs-Signal 0-100%: 0-10 V
Eingangs-Widerstand: 180 kOhm
Abmessungen: 47 x 85 x 27 mm
Einbau-Abmessungen: 41 x 69 x 23 mm
Lagertemperaturbereich: -25°C - +60°C
Arbeitstemperaturbereich: -20°C - +45°C
Gewicht: 80 g
Neben der sehr vorteilhaften Privatnutzung wurde das Anzeigepanel ebenso für den rauen Einsatz in Feuerwehrfahrzeugen konzipiert. Es ist ebenfalls der Einbau in Anzeigetafeln möglich.
Lieferumfang:
1x Votronic LED Tank Display HE 010
4x Befestigungsschrauben
1x Bedienungsanleitung
The level gauge / tank electrode fl from Votronic (mpn 5530) is based on a flexible rope probe and can be easily shortened to the appropriate tank height. The tank sensor is ideally suited for both fresh water tanks and waste water tanks. By using appropriate materials, these tank sensors also comply with the drinking water regulation din 2001-2. The tank sensor is designed for high tanks with a height between 30 and 110 cm As a further special feature, the tank electrode fl from Votronic can be mounted both on the inside and on the outside of the tank. For the tank sensor fl, the top and the side wall of the tank can be used for mounting essential product features of the Tank Sensor fl 5530 permissible operating voltage: 12v and 24v dc (suitable for continuous operation) for mounting on tank top or side wall suitable for fresh and waste water tanks suitable for tank heights from 30 to 100 cm linear, stepless signal of the filling level Test mark: E-testing (EMC/vehicle directive) complies with din standard 2001-2 from the drinking water regulation flexible cable probe, easy to shorten to tank height Installation diameter 38 mm (or pg 29 thread) Flange diameter 46,5 mm Connection cable 75 cm long for plastic tanks: wall thickness max. 8 mm optimal in combination with Votronic level indicators The tank transmitter is compatible with the following Votronic indicators: . </p Fresh water tank gauge s, 5311 Waste water indicator s, 5313 Holding tank gauge s, 5315 Info Panel Pro 5330 Info Panel Pro 24v vpc Terra vpc Mercury vpc Jupiter 100 Smart Shunt, 5747 vpc Jupiter 200 Smart Shunt, 5748 vpc Jupiter 400 Smart Shunt, 5749 Scope of delivery: 1x Votronic 5530 fl tank sensor 1x Flexible cable probe, sealing ring, union nut pg 29 1x instruction manual
€49.59*
The level gauge / tank electrode fl from Votronic (mpn 5530) is based on a flexible rope probe and can be easily shortened to the appropriate tank hei...
The level gauge / tank electrode fl from Votronic (mpn 5530) is based on a flexible rope probe and can be easily shortened to the appropriate tank height. The tank sensor is ideally suited for both fresh water tanks and waste water tanks. By using appropriate materials, these tank sensors also comply with the drinking water regulation din 2001-2. The tank sensor is designed for high tanks with a height between 30 and 110 cm As a further special feature, the tank electrode fl from Votronic can be mounted both on the inside and on the outside of the tank. For the tank sensor fl, the top and the side wall of the tank can be used for mounting essential product features of the Tank Sensor fl 5530 permissible operating voltage: 12v and 24v dc (suitable for continuous operation) for mounting on tank top or side wall suitable for fresh and waste water tanks suitable for tank heights from 30 to 100 cm linear, stepless signal of the filling level Test mark: E-testing (EMC/vehicle directive) complies with din standard 2001-2 from the drinking water regulation flexible cable probe, easy to shorten to tank height Installation diameter 38 mm (or pg 29 thread) Flange diameter 46,5 mm Connection cable 75 cm long for plastic tanks: wall thickness max. 8 mm optimal in combination with Votronic level indicators The tank transmitter is compatible with the following Votronic indicators: . </p Fresh water tank gauge s, 5311 Waste water indicator s, 5313 Holding tank gauge s, 5315 Info Panel Pro 5330 Info Panel Pro 24v vpc Terra vpc Mercury vpc Jupiter 100 Smart Shunt, 5747 vpc Jupiter 200 Smart Shunt, 5748 vpc Jupiter 400 Smart Shunt, 5749 Scope of delivery: 1x Votronic 5530 fl tank sensor 1x Flexible cable probe, sealing ring, union nut pg 29 1x instruction manual