40A standard flat fuse for vehicles, industry and 12V/24V solar systems. Details:Max. current 40AVoltage 6 - 32VHigh quality with smallest tolerancesWide range of possible applications for professionals or in the private sector: vehicles, boats, protection of battery cables, etc.Color: orange

5A standard flat fuse for vehicles, industry and 12V/24V solar systems. Details: max. current 5A Voltage 6 - 32V high quality with smallest tolerances matt design wide spectrum of possible applications for professionals or in the private sector: vehicles, boats, protection of battery cables, etc. color: orange

20a standard flat fuse for automotive, industrial and 12v/24v solar systems. The proven DC flat fuses can also be used perfectly in the hobby and leisure sector. Matching flat fuse holders for different cable cross-sections can also be found in our storefor a maximum current of 20aVoltage: 6...32Vhigh quality with smallest possible tolerances and in matt designwide range of applications in the professional as well as in the private sector: kfz, boat, protection of battery cables and many more...Scope of delivery: 1 piece flat fuse 20a

10A standard flat fuse for vehicles, industry and 12V/24V solar systems. Details:Max. current 10AVoltage 6 - 32VHigh quality with smallest tolerancesWide spectrum of possible applications for professionals or in the private sector: vehicles, boats, protection of battery cables, etc.Color: red

15A standard flat fuse for vehicles, industry and 12V/24V solar systems. Details:Max. current 15AVoltage 6 - 32VHigh quality with smallest tolerancesWide spectrum of possible applications for professionals or in the private sector: vehicles, boats, protection of battery cables, etc.Color: blue

25A standard flat fuse for vehicles, industry and 12V/24V solar systems. Details: max. current 25A Voltage 6 - 32V high quality with smallest tolerances matt design wide spectrum of possible applications for professionals or in the private sector: vehicles, boats, protection of battery cables, etc. color: white

7.5a standard flat fuse for automotive, industrial and 12v/24v solar systems. The proven DC flat fuses can also be used perfectly in the hobby and leisure sector. Matching flat fuse holders for different cable cross-sections can also be found in our storefor a maximum current of 5AVoltage: 6...32Vhigh quality with smallest possible tolerances and in matt designwide range of applications in the professional as well as in the private sector: kfz, boat, protection of battery cables and many more...Scope of delivery: 1 piece flat fuse 7,5a

The 4-compartment MEGA-Fuse fuse holder from Victron Energy (mpn anm-c4) with cover is used for the safe installation of dc MEGA-Fuse strip fuses. The housing provides solid protection of the fuse from external influences. In addition, the fuse holder is equipped with a holder for spare fuses. Article features at a glance: 500a max. current at max. 32v dc 300a max. current at max. 58v dc For MEGA-Fuse type fuses Material: High strength plastic compound Dimensions: 160 x 170 x 50 mm Operating temperature range: -20°C - +150°C Complies with iec 60497-3: 1999 + a1: 2001 + a2: 2005 in conjunction with iec 60497-1: 2004 about the MEGA strip fuse MEGA-Fuse type fuses belong to the group of strip fuses and are screwed to the holder to ensure optimum contact. Corresponding nuts and snap rings are already pre-mounted on the holder. With MEGA fuses up to 500a can be fused at 32v dc. With the 58v variants up to 300a are possible. Scope of delivery: 1x Victron Energy 4-bay MEGA-Fuse fuse holder (mpn anm-c4)

This fuse holder is fully isolated, the housing is made of rubber (fully molded). Thanks to that the fuse is additionally protected from corrosion.It is suitable for various vehicles. Electronical components can be quickly and easily protected from overvoltage. Fitting fuses are available in our shop. Details: suitable for flat fuses up to 16A (ATC/vehicle fuses) dimensions housing: 40 x 17 x 45mm total length: 25cm splash-proof housing and cover made of rubber cable diameter 6mm² Deliver scope: fuse holder without fuse  

The Offgridtec midi fuses are among the high current screw fuses and are ideal for protecting your systems. The fuses are suitable for voltages up to 58v and are available in sizes from 30a to 200A. Matching the midi fuses we also offer fuse holders suitable for 1 fuse or 2 fuses an. Properties Very low contact resistance for high system efficiency For a maximum voltage of 58v/DC Available sizes: 30a, 40a, 50a, 60a, 80a, 100, 125a, 150a, 175a, 200A High current screw fuse Scope of delivery: 1x Offgridtec midi fuse - size at choice

MEGA fuses for voltages up to maximum 70v for 48v systems. Ideal for use as a fuse on the battery cable of voltage converters and inverters or even charge controllers with high charge currentsThe following fuse sizes are available:60A80A100A125A200A250A300AScope of delivery1x MEGA fuse of your choice

Der MEGA-Fuse Sicherung Halter von Victron Energy (MPN CIP000100001) mit Deckel dient der sicheren Installation von DC MEGA-Fuse Streifensicherungen. Das Gehäuse bietet einen soliden Schutz der Sicherung vor äusseren Einflüssen. wichtige Artikelmerkmale im Überblick: 500A max. Strom bei max. 32V DC 300A max. Strom bei 58V DC für Sicherungen vom Typ MEGA-Fuse Material: hochfeste Kunststoff-Mischung Entspricht IEC 60947-3: 1999 + A1: 2001 + A2: 2005 in Verbindung mit IEC 60947-1: 2004 über die MEGA-Streifensicherung Sicherungen vom Typ MEGA-Fuse zählen zu den Streifensicherungen und werden am Halter verschraubt um einen optimalen Kontakt zu gewährleisten. Entsprechende Muttern und Sprengringe sind am Halter bereits vormontiert. Mit Mega-Sicherungen können bei 32V DC bis zu 500A abgesichert werden. Bei den 58V Varianten sind bis zu 300A möglich. 32V Mega-Fuse Sicherungen - alle Größen bis max. 500A58V Mega-Fuse Sicherungen - alle Größen bis max. 300A Lieferumfang:1x Victron CIP000100001 MEGA-FUSE Sicherung Halter

The midi fuse holder in screw design from Offgridtec is used for the safe installation of dc midi fuses. The ring lugs of the cable ends can be placed directly on the threaded bolts and screwed tightly. This guarantees a firm and permanent connection, preventing voltage drop as far as possible. The housing with matching cover provides solid protection. Fuses of the midi-Fuse type are among the strip fuses and are screwed directly to the holder. The corresponding nuts and snap rings are already pre-mounted on the holder. Properties For 1 fuse Max. 200a current Max. 58v dc Voltage For midi-Fuse type fuses High strength plastic housing Required retaining rings and nuts included Notice Only the holder is included in the scope of delivery, the Fuses must be purchased separately. Scope of delivery: 1x Offgridtec midi fuse holder 1-fold

30A standard flat fuse for vehicles, industry and 12V/24V solar systems. Details:Max. current 30AVoltage 6 - 32VHigh quality with smallest tolerancesWide spectrum of possible applications for professionals or in the private sector: vehicles, boats, protection of battery cables, etc.Color: green

This fuse holder is fully isolated, the housing is made of rubber (fully molded). Thanks to that the fuse is additionally protected from corrosion.It is suitable for various vehicles. Electronical components can be quickly and easily protected from overvoltage. Fitting fuses are available in our shop. Details: nominal current: 30A (ATC/vehicle fuse) dimensions housing: 40 x 17 x 45mm total length: 25cm splash-proof housing and cover made of rubber cable diameter 4.0mm² Deliver scope: fuse holder without fuse

Suitable for Maxi flat fuses for additional protection of electric consumers. Splash proof. Features:Solid rubber protection cap - splash proofCable diameter: 10mm²Nominal current: 60A

This high-quality cable is needed to connect your charging regulator to an accumulator. The cable comes with a wire end sleeve for a connection to the charging regulator and M8 circular eyelets to connect to a battery. The binding posts are included in the scope of delivery. Features: 1,5m /2 x 6mm² battery cable with 20A fuse connects charging regulator and battery professional manufactured high-quality materials quick and easy installation Technical data:Cable diameter: 2 x 6mm²Fuse: 20ALength: 1,5m

The Maxi fuses are, in contrast to the standard automotive flat fuses, intended for currents from 30a. Visually they correspond to the car flat fuses (ato), only they are larger.The fuse is suitable for systems with 12v or 24v. In general, fuse elements should always be located in close proximity to the battery in order to provide the best possible protection for the cable route to the consumer.Features:Maxi flat plug-in fuseVoltage range: max. 32v dc (designed for 12v and 24v battery systems)Fuse rating: 50aFuse type: slow blowHousing material: plasticContact material: copper zinc alloyScope of delivery:1x Maxi fuse 50a (red)

Ideal to isolate or protect open parts of a cable. If heated this tube contracts and forms a closed isolation which protects the cable from external influences (water, UV-radiation, corrosion, etc.) The tube comes in a handy box which allows you to unroll the needed length. Simply cut the tube into the needed length and put it in the designated place. Now you heat up the tube until it encloses the cable completely and you see resin come out of its ends.To heat up the tube you can use a heat gun or another suitable heat source. Make sure you do not heat up a single spot for too long but evenly until the tube has shrinked to the needed size. Details:Color: blackSize: 1,6mm to 0,8mmShrinking ratio: 2:1Length: 10m

The 6-way fuse holder from Offgridtec (mpn 012826) provides professional distribution and fusing of small and medium loads. It consolidates branch circuits and eliminates the clutter of in-line fuses for electronics and other equipment. Includes flat fuses from 5a-20a, nameplates and screws for mounting, in addition to the 6-pin fuse holder. The fuse holder is made of environmentally friendly PBT material with high mechanical strength, insulation, heat resistance and flame retardance Flat fuses The fuse holder contains 12 flat fuses, of which 2x 5a, 2x 10a, 4x 15a, and 4x 20a. The fuses meet the high Offgridtec quality standards, have a long service life and offer a wide acceptable temperature range. The included multi-function labels make it very easy to identify and connect the connected wires. The integrated led indicators provide additional protection. When a fuse blows, the red led lights up immediately and you can quickly identify the fault and fix it right away. High quality workmanship The fuse holder is well protected by the clip-lock protective cover. The insulating cover with push-latch system can be easily opened by pressing. The transparent design provides additional protection for your blade fuses. The holder is made of eco-friendly PBT material with high mechanical strength, insulation, heat resistance and flame retardant. Problems such as cracks, deformation, burns or short circuits hardly occur. Mounting The set also includes four stainless steel screws. These sturdy screws are corrosion resistant and ensure a long and safe installation. The input and output connections of the fuse holder are fixed with quick mounting screws and the fuse box is fixed with the stainless steel screws, which makes the installation easier and safer. Technical data Weight: 176g Dimensions: 87.75 x 85 x 36.5 mm Input voltage: 12v-32v DC Input current: 100A Rated power output terminals: max. 30a per circuit Number of circuits/fuse slots: 6 Main line connection: M5 grub screw Main wire: 4-6AWG Single line connection: m4 threaded stud Single line: 12-16AWG Working temperature: -30°C - +85°C Scope of delivery: 1x 6-pole fuse holder 2x 5a fuse sheet orange 2x 10a fuse blade red 4x 15a fuse blade blue 4x 20a fuse sheet yellow 2x sticker 4x screws

Ideal to isolate or protect open parts of a cable. If heated this tube contracts and forms a closed isolation which protects the cable from external influences (water, UV-radiation, corrosion, etc.) The tube comes in a handy box which allows you to unroll the needed length. Simply cut the tube into the needed length and put it in the designated place. Now you heat up the tube until it encloses the cable completely and you see resin come out of its ends.To heat up the tube you can use a heat gun or another suitable heat source. Make sure you do not heat up a single spot for too long but evenly until the tube has shrinked to the needed size. Details:Color: BlackSize: 1.2mm to 0.6mmShrinking ratio: 2:1Length: 10m

The miniature circuit breakers from Offgridtec (mpn 013350) are an important part of your electrical installation. The switches prevent current spikes from damaging your equipment. With the practical and durable transparent cover, the switch complies with protection class ip56 and is therefore also suitable for use in marine applications. But the circuit breaker is also a good choice for installations in mobile homes, buses and many other areas. Available for the following rated currents 60A 100A 200A 300A Features For voltages from 12v to 48V With transparent cover For system protection in case of overload or short circuit Protection class: ip56 Number of poles: 2 Plastic housing and cover Dimension without cover: 78 x 52 x 45 mm Dimension with cover: 84 x 56 x 47 mm Circuit breaker Miniature circuit breakers are current-limiting automatic switches that can be switched on again after tripping. They are used instead of fuses because they offer greater operational safety. Circuit breakers are the automatic circuit breaker for effective short-circuit protection. The switches are an important part of every electrical installation and provide effective personal and system protection through safe disconnection in the event of an overload or short circuit. Scope of delivery: 1x Offgridtec Circuit breaker

The 4-compartment MEGA-Fuse fuse holder from Offgridtec (mpn anm-c4) with cover is used for the safe installation of dc MEGA-Fuse strip fuses. The housing provides solid protection of the fuse from external influences. In addition, the fuse holder is equipped with a holder for spare fuses. Article features at a glance: 500a max. current at max. 32v dc 300a max. current at max. 58v dc For MEGA-Fuse type fuses Material: High strength plastic compound Dimensions: 170 x 95 x 43 mm Operating temperature range: -20°C - +150°C Complies with iec 60497-3: 1999 + a1: 2001 + a2: 2005 in conjunction with iec 60497-1: 2004 about the MEGA strip fuse MEGA-Fuse type fuses belong to the group of strip fuses and are screwed to the holder to ensure optimum contact. Corresponding nuts and snap rings are already pre-mounted on the holder. With MEGA fuses up to 500a can be fused at 32v dc. With the 58v variants up to 300a are possible. Scope of delivery: 1x Offgridtec 4-bay MEGA-Fuse fuse holder (mpn anm-c4)

Der Einbaurahmen Rear für eine Steckdose von Offgridtec bietet die Möglichkeit, Ihrer Steckdose mehr Schutz zu geben. Eigenschaften: Material: Kunststoff Farbe: Schwarz Lieferumfang: 1x Einbaurahmen Rear für eine Steckdose 1x 2 Schrauben zur Befestigung