DC DC converter
43 Results
Sorting
More versions available
1-67-012865-002
Victron Orion-Tr Smart non-isolated dc-dc converter charger 24/24-17a (400w)
The Orion Tr-Smart dc-dc from Victron Energy (mpn ori242440140) is a professional, dc to dc adaptive 3-stage charger with integrated Bluetooth, known in the market as a battery-to-battery (b2b) charger. The charge booster is suitable for use in dual battery systems in vehicles or boats where the alternator and starting battery are used to charge the service battery. The charger can be used in 12v or 24V systems and is suitable for both lead acid and lithium batteries. Models up to 400w are available and an unlimited number of units can be connected in parallel to increase the output power. Main features Suitable for Bluetooth Smart Fully programmable Adaptive 3-step charging algorithm Remote on/off Short circuit proof Parallel connection possible to increase output current overtemperature protection Protection class IP43 Suitable for Bluetooth Smart Monitoring, changing settings and updating the charger when new software functions become available can be done with any Bluetooth enabled smartphone, tablet or other device. Adaptive 3-stage charging algorithm: constant current - constant voltage - conservation For lead acid batteries, it is important to keep the recording time short during shallow discharges to avoid overcharging the battery. After a deep discharge, the constant voltage duration is automatically extended to ensure that the battery charges fully. For lithium batteries, the recording time is fixed, by default 2 hours. Alternatively, a fixed output voltage can be selected. Remote on/off A remote on/off switch or relay contact can be connected to the two-pin connector. Alternatively, the h terminal (right) of the two-pin plug can be connected to a battery positive terminal or the l terminal (left) of the two-pin plug can be connected to the battery negative terminal (or to the body of a vehicle, for example). Technical data Input voltage range: 20-35 V Rated output voltage: 24.2 V Output voltage setting range: 20-30 V Output voltage tolerance: ±0.2 V Cont. Output current at nominal output voltage and 40°: 17 A Cont. Output power at 40°C: 400 W Operating temperature range: -20°C - +55°C Weight: 1,6 kg Dimensions: 130 x 186 x 70 mm scope of delivery: 1x Victron Energy Orion-Tr Smart dc/dc charge booster 24/24-17a (400w) ORI242440140
The Orion Tr-Smart dc-dc from Victron Energy (mpn ori242440140) is a professional, dc to dc adaptive 3-stage charger with integrated Bluetooth, known ...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-009440
Victron Orion-Tr 12/12-9 DC DC Converter isolated 12V 9A 110W
The Victron Orion Tr 12/12-9 (MPN ORI121210110R) as an isolated DC-DC converter and provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-consumers.
The 12/12 converts an adjustable input voltage of 8-17V DC into an adjustable DC output voltage of 10-15V. with constant 9A (110W) to supply any 12V-consumer with the right voltage. Especially when it comes to sensitive electronics a precise voltage is vital for flawless operation.
Additionally the Orion Tr 12/12 supports parallel operation with identical devices and is equipped with a remote controllable on-/off-switch.
Important details:
12V DC operation voltage, adjustable output voltage 10-15V
supports parallel operation with identical devices - increases output current
remote control possible
temperature-controlled ventilation
wide input-voltage-range of 8V to 17V
110W output at constant 9A
max. 12.5A output current
high efficiency of 87%
weight: 0.42kg
Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries.
These 12V DC-DC converters out of the Orion-series provide a clean output voltage of 10-15V and compensate possible conductor losses as well as fluctuations of the battery voltage.
Remote on-/off-connection on all high-performance models
Thanks to the remote on-/off-switch a high-current-switch on the input-cabling is not necessary. It can be controlled via a power-saving-switch or through the motor's run/stop-switch (see manual).
Adjustable output voltage allows battery charging
Parallel operation
Up to 5 units can be connected parallely.
Delivery scope:
1x Victron ORI121210110R Orion 12/12-9 DC DC Converter 12V to 12V (10-15V adjustable) 9A 110W
The Victron Orion Tr 12/12-9 (MPN ORI121210110R) as an isolated DC-DC converter and provides constant DC-voltage and therefore ensures uninterrupted o...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-009455
Victron Orion-Tr 12/24-5 DC-DC Converter isolated 12V to 24V 5A 120W
The Victron Orion-Tr 12/24-5 (MPN ORI122410110) is an isolated DC-DC converter and provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-consumers.
The 12/24 converts an adjustable input voltage of 8-17V DC into an adjustable DC output voltage of 20-30V with constant 5A (120W) to supply any 12V-consumer with the right voltage. Especially when it comes to sensitive electronics a precise voltage is vital for flawless operation.
Additionally the Orion Tr 12/24 supports parallel operation with identical devices and is equipped with a remote controllable on-/off-switch.
Important details:
12V DC operation voltage, adjustable output voltage 20-30V
supports parallel operation with identical devices - increases output current
remote control possible
IP43
wide input-voltage-range of 8V to 17V
120W output at constant 5A
max. 6.3A output current
high efficiency of 87%
weight: 0.42kg
Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries.
These 12V DC-DC converters out of the Orion-series provide a clean output voltage of 20-30V and compensate possible conductor losses as well as fluctuations of the battery voltage.
Remote on-/off-connection on all high-performance models
Thanks to the remote on-/off-switch a high-current-switch on the input-cabling is not necessary. It can be controlled via a power-saving-switch or through the motor's run/stop-switch (see manual).
Adjustable output voltage allows battery charging
Parallel operation
Up to 5 units can be connected parallely.
Delivery scope:
1x Victron ORI122410110 Orion 12/24-5 DC-DC Converter 12V to 24V (20-30V adjustable) 5A 240W
The Victron Orion-Tr 12/24-5 (MPN ORI122410110) is an isolated DC-DC converter and provides constant DC-voltage and therefore ensures uninterrupted op...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-009365
Victron Orion-Tr 24/12-10 120W DC DC Converter
The Victron Orion 24/12-10 120W (MPN ORI241210200R) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-consumers.
The 24/12 converts 24V DC into 12V DC with constant 10A (120W). Moreover it compensates possible conductor losses as well as fluctuations of the battery voltage.
Important details:
24V DC operation voltage, 12V DC output voltage
wide input-voltage-range of 18V to 36V
120W output at constant 10A
Version not insulated
Delivery scope:
1x Victron ORI241210200R Orion 24/12-10 DC DC Converter 24V to 12V 10A 120W
The Victron Orion 24/12-10 120W (MPN ORI241210200R) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of your...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-012280
Victron Orion-Tr 12/12-30 360w dc-dc voltage converter isolated
The Orion-Tr 12/12-30 from Victron Energy (mpn ori121240110) is a galvanically isolated dc-dc voltage converter and provides regulated dc voltage for trouble-free operation of your dc loads. The compact Orion-TR dc-dc voltage converter converts dc input voltage (10-17v) to a regulated 12v output voltage (10-15v) and delivers a constant continuous current of 30a, which is equivalent to 360w of power.
Thanks to the Orion-Tr 12/12-30, you can supply any 12v load with exactly the right voltage. The correct voltage is guaranteed even with longer lines, because the Orion can adjust the voltage to any line losses that occur. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. Furthermore, the Orion-Tr 12/12-30 can be connected in parallel with identical devices and has a remote-controlled on/off switch.
important features of the Orion-Tr 12/12-30 360w (with galvanic isolation)
Victron Energy part number: ori121240110
for 12v battery voltage, adjustable output voltage 10-15V
max. 360w output power at a maximum current of 30a
wide input voltage range: 10-17V
Protection class ip43, galvanic isolation 200v dc between input, output and housing
can be connected in parallel with similar devices for increased performance
remote on/off switch
wide input voltage range: 10-17V
high efficiency of 87
Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries.
remote on/off switch
The remote on/off connector eliminates the need for a high-current switch in the input wiring. The remote on/off connection can be controlled by a power save switch or by the motor's run/stop switch (see manual)
Scope of delivery:
1x Victron Energy ori121240110 Orion-Tr 12/12-30 30a 360w dc-dc voltage converter
The Orion-Tr 12/12-30 from Victron Energy (mpn ori121240110) is a galvanically isolated dc-dc voltage converter and provides regulated dc voltage for ...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-009410
Victron Orion 12/24-8 DC DC Converter 12V to 24V 8A 192W
The Victron Orion 12/24-8 (MPN ORI122408020) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-consumers. The 12/24 converts 12V DC into 24V DC with constant 8A (192W). Moreover it compensates possible conductor losses as well as fluctuations of the battery voltage.
Important details:
12V DC operation voltage, 24V output voltage
wide input-voltage-range of 18V to 36V
192W output at constant 8A
max. 20A output current
high efficiency of 95%
weight: 0.4kg
Delivery scope:1x Victron ORI122408020 Orion 12/24-8 DC DC Converter 12V to 24V 8A 192W
The Victron Orion 12/24-8 (MPN ORI122408020) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-con...
Shipped in 10-14 Werktage
Shipped in 10-14 Werktage
1-67-012275
Victron Orion-Tr 12/12-18 220w dc-dc voltage converter isolated
The Orion-Tr 12/12-18 from Victron Energy (mpn ori121222110) is a galvanically isolated dc-dc voltage converter and provides regulated dc voltage for trouble-free operation of your dc loads. The compact Orion-TR dc-dc voltage converter converts dc input voltage (8-17v) to a regulated 12v output voltage (10-15v) and delivers a constant continuous current of 18a, which is equivalent to 220w of power.
Thanks to the Orion-Tr 12/12-18, you can supply any 12v load with exactly the right voltage. The correct voltage is guaranteed even with longer lines, because the Orion can adjust the voltage to any line losses that occur. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. Furthermore, the Orion-Tr 12/12-18 can be connected in parallel with identical devices and has a remote-controlled on/off switch.
important features of the Orion-Tr 12/12-18 220w (with galvanic isolation)
Victron Energy part number: ori121222110
for 12v battery voltage, adjustable output voltage 10-15V
max. 220w output power at a maximum current of 18a
wide input voltage range: 8-17V
Protection class ip43, galvanic isolation 200v dc between input, output and housing
can be connected in parallel with similar devices for increased performance
remote on/off switch
wide input voltage range: 8-17V
high efficiency of 87
Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries.
remote on/off switch
The remote on/off connector eliminates the need for a high-current switch in the input wiring. The remote on/off connection can be controlled with a power save switch or by the motor's run/stop switch (see manual)
Scope of delivery:
1x Victron Energy ori121222110 Orion-Tr 12/12-18 18a 220w dc-dc voltage converter
The Orion-Tr 12/12-18 from Victron Energy (mpn ori121222110) is a galvanically isolated dc-dc voltage converter and provides regulated dc voltage for ...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-009415
Victron Orion 12/24-10 DC DC Converter 12V to 24V 10A 240W
The Victron Orion 12/24-10 (MPN ORI122410020) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-consumers. The 12/24 converts 12V DC into 24V DC with constant 10A (240W). Compared to smaller models out of this series it is possible to adjust the output voltage (20-30V).Moreover the 12/24 can be used for trickle charge of your battery and supports parallel operation with identical devices to increase the output current.
Important details:
12V DC operation voltage, adjustable output voltage 20-30V
supports parallel operation with identical devices - increases output current
can be used for trickle charge
remote control possible
temperature-controlled ventilation
wide input-voltage-range of 9V to 18V
240W output at constant 10A
max. 10A output current
high efficiency of 95%
weight: 0.4kg
DC-DC converter out of the Orion-series provide a clean 24V output current and compensate possible conductor losses as well as fluctuations of the battery voltage.
Remote on-/off-connection on all high-performance modelsThanks to the remote on-/off-switch a high-current-switch on the input-cabling is not necessary. It can be controlled via a power-saving-switch or through the motor's run/stop-switch (see manual).
Adjustable output voltage allows battery chargingThanks to the adjustable output voltage it is possible to charge a 24V battery through a 12V-system.
Parallel operationUp to 5 units can be connected parallely.
Delivery scope:1x Victron ORI122410020 Orion 12/24-10 DC DC Converter 12V to 24V 10A 240W
The Victron Orion 12/24-10 (MPN ORI122410020) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-co...
Shipped in 10-14 Werktage
Shipped in 10-14 Werktage
1-67-012305
Victron Orion-Tr 24/24-12 280w dc-dc voltage converter isolated
The Orion-Tr 24/24-12 from Victron Energy (mpn ori242428110) is a galvanically isolated dc-dc voltage converter and provides regulated dc voltage for trouble-free operation of your dc loads. The compact Orion-TR dc-dc voltage converter converts dc input voltage (16-35v) to a regulated 24v output voltage (20-30v) and delivers a constant continuous current of 12a, which is equivalent to 280w of power. Thanks to the Orion-Tr 24/24-12, you can supply any 24v load with exactly the right voltage. The correct voltage is guaranteed even with longer lines, as the Orion can adjust the voltage to any line losses that occur. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. Furthermore, the Orion-Tr 24/24-12 can be connected in parallel with identical devices and has a remote-controlled on/off switch. important features of the Orion-Tr 24/24-12 280w (with galvanic isolation) Victron Energy part number: ori242428110 for 24v battery voltage, adjustable output voltage 20-30V max. 280w output power at a maximum current of 12a wide input voltage range: 16-35V Protection class ip43, galvanic isolation 200v dc between input, output and housing can be connected in parallel with similar devices for increased performance remote on/off switch high efficiency of 87 Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries. remote on/off switch The remote on/off connection eliminates the need for a high-current switch in the input wiring. The remote on/off connection can be controlled with a power saving switch or by the motor's run/stop switch (see manual). Scope of delivery: 1x Victron Energy ori242428110 Orion-Tr 24/24-12 12a 280w dc-dc voltage converter
The Orion-Tr 24/24-12 from Victron Energy (mpn ori242428110) is a galvanically isolated dc-dc voltage converter and provides regulated dc voltage for ...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-009420
Victron Orion 12/24-20 DC DC Converter 12V to 24V 10A 240W
The Victron Orion 12/24-20 (MPN ORI122420020) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-consumers. The 12/24 converts 12V DC into 24V DC with constant 20A (480W). Compared to smaller models out of this series it is possible to adjust the output voltage (20-30V).Moreover the 12/24 can be used for trickle charge of your battery and supports parallel operation with identical devices to increase the output current.
Important details:
12V DC operation voltage, adjustable output voltage 20-30V
supports parallel operation with identical devices - increases output current
can be used for trickle charge
remote control possible
temperature-controlled ventilation
wide input-voltage-range of 9V to 18V
480W output at constant 20A
max. 30A output current
high efficiency of 93%
weight: 0.4kg
DC-DC converter out of the Orion-series provide a clean 24V output current and compensate possible conductor losses as well as fluctuations of the battery voltage.
Remote on-/off-connection on all high-performance modelsThanks to the remote on-/off-switch a high-current-switch on the input-cabling is not necessary. It can be controlled via a power-saving-switch or through the motor's run/stop-switch (see manual).
Adjustable output voltage allows battery chargingThanks to the adjustable output voltage it is possible to charge a 24V battery through a 12V-system.
Parallel operationUp to 5 units can be connected parallely.
Delivery scope:1x Victron ORI122420020 Orion 12/24-20 DC DC Converter 12V to 24V 20A 480W
The Victron Orion 12/24-20 (MPN ORI122420020) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-co...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-009375
Victron Orion-Tr 24/12-15 180W DC DC Converter
The Victron Orion 24/12-15 180W (MPN ORI241215200R) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-consumers.
The 24/12 converts 24V DC into 12V DC with constant 15A (180W). Moreover it compensates possible conductor losses as well as fluctuations of the battery voltage.
Important details:
24V DC operation voltage, 12V DC output voltage
wide input-voltage-range of 18V to 36V
180W output at constant 15A
Version not insulated
Delivery scope:
1x Victron ORI241215200R Orion 24/12-15 DC DC Converter 24V to 12V 15A 180W
The Victron Orion 24/12-15 180W (MPN ORI241215200R) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of your...
Shipped in 10-14 Werktage
Shipped in 10-14 Werktage
1-67-009520
Victron Orion-Tr 48/12-9 DC-DC Converter isolated 48V to 12V 9A 110W
The Victron Orion-Tr 48/12-9 (MPN ORI481210110) is an isolated DC-DC converter and provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-consumers.
The 48/12 converts an adjustable input voltage of 32-70V DC into an adjustable DC output voltage of 10-15V with constant 9A (110W) to supply any 12V-consumer with the right voltage. Especially when it comes to sensitive electronics a precise voltage is vital for flawless operation.
Additionally the Orion-Tr 48/12 supports parallel operation with identical devices and is equipped with a remote controllable on-/off-switch.
Important details:
48V DC operation voltage, adjustable 12V output voltage 10-15V
supports parallel operation with identical devices - increases output current
remote control possible
protection class IP43
wide input-voltage-range of 8V to 17V
110W output at constant 9A
max. 12.5A output current
high efficiency of 87%
weight: 0.42kg
Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries.
These 48V DC-DC converters out of the Orion-series provide a clean output voltage of 10-15V and compensate possible conductor losses as well as fluctuations of the battery voltage.
Remote on-/off-connection on all high-performance models
Thanks to the remote on-/off-switch a high-current-switch on the input-cabling is not necessary. It can be controlled via a power-saving-switch or through the motor's run/stop-switch (see manual).
Adjustable output voltage allows battery charging
For example to charge a 12V battery bank in a 48V-system.
Parallel operation
Any number of units can be connected parallely.
Delivery scope:
1x Victron ORI481210110 Orion 48/12-9 DC-DC Converter 48V to 12V (10-15V adjustable) 9A 120W
The Victron Orion-Tr 48/12-9 (MPN ORI481210110) is an isolated DC-DC converter and provides constant DC-voltage and therefore ensures uninterrupted op...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-012340
Victron Orion-Tr 48/48-6 280w dc-dc voltage converter isolated
The Orion-Tr 48/48-6 from Victron Energy (mpn ori482441110) is an electrically isolated dc-dc voltage converter and provides regulated dc voltage for trouble-free operation of your dc loads. The compact Orion-TR dc-dc voltage converter converts dc input voltage (32-70v) to a regulated 48v output voltage (40-60v) and delivers a constant continuous current of 6a, which is equivalent to 280w of power.
Thanks to the Orion-Tr 48/48-6, you can supply any 48v load with exactly the right voltage. The correct voltage is guaranteed even with longer lines, as the Orion can adjust the voltage to any line losses that occur. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. Furthermore, the Orion-Tr 48/48-6 can be connected in parallel with identical devices and has a remote-controlled on/off switch.
important features of the Orion-Tr 48/48-6 280w (with galvanic isolation)
Victron Energy part number: ori482441110
for 48v battery voltage, adjustable output voltage 40-60V
max. 280w output power at a maximum current of 6a
wide input voltage range: 32-70V
Protection class ip43, galvanic isolation 200v dc between input, output and housing
can be connected in parallel with similar devices for increased performance
remote on/off switch
high efficiency of 87%
Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries.
remote on/off switch
The remote on/off connector eliminates the need for a high-current switch in the input wiring. The remote on/off connection can be controlled by a power save switch or by the motor's run/stop switch (see manual).
Scope of delivery:
1x Victron Energy ori482441110 Orion-Tr 48/48-6 6a 280w dc-dc voltage converter
The Orion-Tr 48/48-6 from Victron Energy (mpn ori482441110) is an electrically isolated dc-dc voltage converter and provides regulated dc voltage for ...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-009490
Victron Orion-Tr 24/24-5 DC-DC Converter isolated 24V to 24V 5A 120W
The Victron Orion-Tr 24/24-5 (MPN ORI242410110R) is an isolated DC-DC converter and provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-consumers.
The 24/24 converts an adjustable input voltage of 16-35V DC into an adjustable DC output voltage of 20-30V with constant 5A (120W) to supply any 24V-consumer with the right voltage. Especially when it comes to sensitive electronics a precise voltage is vital for flawless operation.
Additionally the Orion-Tr 24/24 supports parallel operation with identical devices and is equipped with a remote controllable on-/off-switch.
Important details:
24V DC operation voltage, adjustable output voltage 20-30V
supports parallel operation with identical devices - increases output current
remote control possible
protection class IP43
wide input-voltage-range of 16V to 35V
120W output at constant 9A
max. 6.3A output current
high efficiency of 87%
weight: 0.42kg
Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries.
These 24V DC-DC converters out of the Orion-series provide a clean output voltage of 20-30V and compensate possible conductor losses as well as fluctuations of the battery voltage.
Remote on-/off-connection on all high-performance models
Thanks to the remote on-/off-switch a high-current-switch on the input-cabling is not necessary. It can be controlled via a power-saving-switch or through the motor's run/stop-switch (see manual).
Parallel operation
Any number of units can be connected parallely.
Delivery scope:
1x Victron ORI242410110R Orion 24/24-5 DC-DC Converter 24V to 24V (20-30V adjustable) 5A 120W
The Victron Orion-Tr 24/24-5 (MPN ORI242410110R) is an isolated DC-DC converter and provides constant DC-voltage and therefore ensures uninterrupted o...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-011035
Victron Orion-Tr 48/12-20 240w dc-dc voltage converter isolated
The Orion-Tr 48/12-20 from Victron Energy (mpn ori481224110) is an electrically isolated dc-dc voltage converter and provides regulated dc voltage for trouble-free operation of your dc loads. The compact Orion-TR dc-dc voltage converter converts dc input voltage (40-70v) to a regulated 12v output voltage (10-15v) and delivers a constant continuous current of 20a, which is equivalent to 240w of power.
Thanks to the Orion-Tr 48/12-20, you can supply any 12v load with exactly the right voltage. The correct voltage is guaranteed even with longer lines, as the Orion can adjust the voltage to any line losses that occur. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. Furthermore, the Orion-Tr 48/12-20 can be connected in parallel with identical devices and has a remote-controlled on/off switch.
important features of the Orion-Tr 48/12-20 240w (with galvanic isolation)
Victron Energy part number: ori481224110
for 48v battery voltage, adjustable output voltage 10-15v
max. 360w output power at a maximum current of 20a
wide input voltage range: 40-70v
Protection class ip43, galvanic isolation 200v dc between input, output and housing
can be connected in parallel with similar devices to increase power output
remote on/off switch
high efficiency of 87%
Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries.
remote on/off switch
The remote on/off connector eliminates the need for a high-current switch in the input wiring. The remote on/off connection can be controlled with a power save switch or by the motor's run/stop switch (see manual).
Scope of delivery:
1x Victron Energy ori481224110 Orion-Tr 48/12-20 20a 240w dc-dc voltage converter
The Orion-Tr 48/12-20 from Victron Energy (mpn ori481224110) is an electrically isolated dc-dc voltage converter and provides regulated dc voltage for...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-012330
Victron Orion-Tr 48/24-12 280w dc-dc voltage converter isolated
The Orion-Tr 48/24-12 from Victron Energy (mpn ori482428110) is an electrically isolated dc-dc voltage converter and provides regulated dc voltage for trouble-free operation of your dc loads. The compact Orion-TR dc-dc voltage converter converts dc input voltage (35-70v) to a regulated 24v output voltage (20-30v) and provides a constant continuous current of 12a, equivalent to 280w of power.
Thanks to the Orion-Tr 48/24-12, you can supply any 24v load with exactly the right voltage. The correct voltage is guaranteed even with longer lines, as the Orion can adjust the voltage to any line losses that occur. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. Furthermore, the Orion-Tr 48/24-12 can be connected in parallel with identical devices and has a remote-controlled on/off switch.
important features of the Orion-Tr 48/24-12 280w (with galvanic isolation)
Victron Energy part number: ori482428110
for 48v battery voltage, adjustable output voltage 20-30V
max. 280w output power at a maximum current of 12a
wide input voltage range: 35-70V
Protection class ip43, galvanic isolation 200v dc between input, output and housing
can be connected in parallel with similar devices for increased performance
remote on/off switch
high efficiency of 87%
Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries.
remote on/off switch
The remote on/off connector eliminates the need for a high-current switch in the input wiring. The remote on/off connection can be controlled with a power save switch or by the motor's run/stop switch (see manual).
Scope of delivery:
1x Victron Energy ori482428110 Orion-Tr 48/24-12 12a 280w dc-dc voltage converter
The Orion-Tr 48/24-12 from Victron Energy (mpn ori482428110) is an electrically isolated dc-dc voltage converter and provides regulated dc voltage for...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-009395
Victron Orion 24/12-40 DC DC Converter 24V to 12V 40A 480W
The Victron Orion 24/12-40 (MPN ORI241240020) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-consumers. The 24/12 converts 24V DC into 12V DC with constant 40A (480W). Compared to smaller devices out of this series the device's ventilation is temperature-controlled.It's total efficiency lies at 95%. Additionally there is an integrated on-/off-switch that can be remote controlled.
Important details:
24V DC operation voltage, 12V DC output voltage
remote controllable on-/off-switch
wide input-voltage-range of 18V to 36V
480W output at constant 40A
max. 55A output current
high efficiency of 95%
weight: 0.85kg
DC-DC converter out of the Orion-series provide a clean 12V output current and compensate possible conductor losses as well as fluctuations of the battery voltage.
Remote on-/off-connection on all high-performance modelsThanks to the remote on-/off-switch a high-current-switch on the input-cabling is not necessary. It can be controlled via a power-saving-switch or through the motor's run/stop-switch (see manual).
Delivery scope:1x Victron ORI241240020 Orion 24/12-40 DC DC Converter 24V to 12V 40A 480W
The Victron Orion 24/12-40 (MPN ORI241240020) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-co...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-012345
Victron Orion-Tr 48/48-8 380w dc-dc voltage converter isolated
The Orion-Tr 48/48-8 from Victron Energy (mpn ori484841110) is an electrically isolated dc-dc voltage converter and provides regulated dc voltage for trouble-free operation of your dc loads. The compact Orion-TR dc-dc voltage converter converts dc input voltage (40-70v) to a regulated 48v output voltage (40-60v) and delivers a constant continuous current of 8a, which is equivalent to 380w of power.
Thanks to the Orion-Tr 48/48-8, you can supply any 48v load with exactly the right voltage. The correct voltage is guaranteed even with longer lines, because the Orion can adjust the voltage to any line losses that occur. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. Furthermore, the Orion-Tr 48/48-8 can be connected in parallel with identical devices and has a remote-controlled on/off switch.
important features of the Orion-Tr 48/48-8 380w (with galvanic isolation)
Victron Energy part number: ori484841110
for 48v battery voltage, adjustable output voltage 40-60V
max. 380w output power at a maximum current of 8a
wide input voltage range: 40-70V
Protection class ip43, galvanic isolation 200v dc between input, output and housing
can be connected in parallel with similar devices for increased performance
remote on/off switch
high efficiency of 87%
Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries.
remote on/off switch
The remote on/off connector eliminates the need for a high-current switch in the input wiring. The remote on/off connection can be controlled by a power save switch or by the motor's run/stop switch (see manual).
Scope of delivery:
1x Victron Energy ori484841110 Orion-Tr 48/48-8 8a 380w dc-dc voltage converter
The Orion-Tr 48/48-8 from Victron Energy (mpn ori484841110) is an electrically isolated dc-dc voltage converter and provides regulated dc voltage for ...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-012360
Victron Orion ip67 Orion ip67 24/12-20a (240w) dc-dc converter
The Orion ip67 24/12-20 from Victron Energy (mpn ori241220160) is a waterproof, shockproof and fire retardant dc-dc voltage converter with 20a rating. It converts 24v dc to a 12v dc voltage. It offers a very wide input voltage range of 15-40 Vdc. The cast aluminum housing and resin coated electronics make Orion ip67 24/12-20 ideal for use in environments that demand the highest levels of durability and reliability. Orion ip67 24/12-20 240w features at a glance Victron Part number: ori241220160 wide input voltage range: 15 - 40 Vdc 12v output voltage max. 20a output current, 240w continuous power 1.8m long connection cables Protection class ip67 fully enclosed: waterproof, shockproof and fire retardant high efficiency of 93 high quality cast aluminum housing electronics covered with resin indestructible: the Orion ip67 24/12-20 20a 240w Water, oil or dirt cannot damage the Orion ip67 dc-dc converter. The housing is made of cast aluminum and the electronics are coated with resin. Thanks to the 1.8m long cables, additional extension cables are not needed in most cases. This supports safe operation in an area where the ip67 degree of protection is required wide input voltage range With an input voltage range of 15 to 40 volts, a stable output is ensured during voltage surges or undervoltages caused by other devices connected to the same battery Scope of delivery: 1x Victron Energy ori241220160 Orion ip67 24/12-20 20a 240w dc-dc voltage converter
The Orion ip67 24/12-20 from Victron Energy (mpn ori241220160) is a waterproof, shockproof and fire retardant dc-dc voltage converter with 20a rating....
Shipped in 1-3 days
Shipped in 1-3 days
1-67-012315
Victron Orion-Tr 24/48-6 280w dc-dc voltage converter isolated
The Orion-Tr 24/48-6 from Victron Energy (mpn ori244828110) is an electrically isolated dc-dc voltage converter and provides regulated dc voltage for trouble-free operation of your dc loads. The compact Orion-TR dc-dc voltage converter converts dc input voltage (15-35v) to a regulated 48v output voltage (40-60v) and delivers a constant continuous current of 6a, which is equivalent to 280w of power.
Thanks to the Orion-Tr 24/48-6, you can supply any 48v load with exactly the right voltage. The correct voltage is guaranteed even with longer lines, as the Orion can adjust the voltage to any line losses that occur. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. Furthermore, the Orion-Tr 24/48-6 can be connected in parallel with identical devices and has a remote-controlled on/off switch.
important features of the Orion-Tr 24/48-6 280w (with galvanic isolation)
Victron Energy part number: ori244828110
for 24v battery voltage, adjustable output voltage 40-60V
max. 280w output power at a maximum current of 6a
wide input voltage range: 15-35V
Protection class ip43, galvanic isolation 200v dc between input, output and housing
can be connected in parallel with similar devices for increased Performance
remote on/off switch
high efficiency of 87%
Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries.
remote on/off switch
The remote on/off connection eliminates the need for a high-current switch in the input wiring. The remote on/off connection can be controlled by a power saving switch or by the motor's run/stop switch (see manual).
Scope of delivery:
1x Victron Energy ori244828110 Orion-Tr 24/48-6 6a 280w dc-dc voltage converter
The Orion-Tr 24/48-6 from Victron Energy (mpn ori244828110) is an electrically isolated dc-dc voltage converter and provides regulated dc voltage for ...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-009385
Victron Orion-Tr 24/12-20 240W DC DC Converter
The Victron Orion 24/12-20 240W (MPN ORI241220200R) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-consumers.
The 24/12 converts 24V DC into 12V DC with constant 20A (240W). Moreover it compensates possible conductor losses as well as fluctuations of the battery voltage.
Important details:
24V DC operation voltage, 12V DC output voltage
wide input-voltage-range of 18V to 36V
240W output at constant 20A
Version not insulated
Delivery scope:
1x Victron ORI241220200R Orion 24/12-20 DC DC Converter 24V to 12V 20A 240W
The Victron Orion 24/12-20 240W (MPN ORI241220200R) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of you...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-012325
Victron Orion-Tr 48/12-30 360w dc-dc voltage converter isolated
The Orion-Tr 48/12-30 from Victron Energy (mpn ori481240110) is an electrically isolated dc-dc voltage converter and provides regulated dc voltage for trouble-free operation of your dc loads. The compact Orion-TR dc-dc voltage converter converts dc input voltage (40-70v) to a regulated 12v output voltage (10-15v) and delivers a constant continuous current of 30a, which is equivalent to 360w of power.
Thanks to the Orion-Tr 48/12-30, you can supply any 12v load with exactly the right voltage. The correct voltage is guaranteed even with longer lines, as the Orion can adjust the voltage to any line losses that occur. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. Furthermore, the Orion-Tr 48/12-30 can be connected in parallel with identical devices and has a remote-controlled on/off switch.
important features of the Orion-Tr 48/12-30 360w (with galvanic isolation)
Victron Energy part number: ori481240110
for 48v battery voltage, adjustable output voltage 10-15V
max. 360w output power at a maximum current of 30a
wide input voltage range: 40-70V
Protection class ip43, galvanic isolation 200v dc between input, output and housing
can be connected in parallel with similar devices for increased performance
remote on/off switch
high efficiency of 87%
Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries.
remote on/off switch
The remote on/off connector eliminates the need for a high-current switch in the input wiring. The remote on/off connection can be controlled with a power save switch or by the motor's run/stop switch (see manual).
Scope of delivery:
1x Victron Energy ori481240110 Orion-Tr 48/12-30 30a 360w dc-dc voltage converter
The Orion-Tr 48/12-30 from Victron Energy (mpn ori481240110) is an electrically isolated dc-dc voltage converter and provides regulated dc voltage for...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-012310
Victron Orion-Tr 24/24-17 400w dc-dc voltage converter isolated
The Orion-Tr 24/24-17 from Victron Energy (mpn ori242441110) is an electrically isolated dc-dc voltage converter and provides regulated dc voltage for trouble-free operation of your dc loads. The compact Orion-TR dc-dc voltage converter converts dc input voltage (20-35v) to a regulated 24v output voltage (20-30v) and provides a constant continuous current of 17a, equivalent to 400w of power.
Thanks to the Orion-Tr 24/24-17, you can supply any 24v load with exactly the right voltage. The correct voltage is guaranteed even with longer lines, because the Orion can adjust the voltage to any line losses that occur. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. Furthermore, the Orion-Tr 24/24-17 can be connected in parallel with identical devices and has a remote-controlled on/off switch.
important features of the Orion-Tr 24/24-17 400w (with galvanic isolation)
Victron Energy part number: ori242441110
for 24v battery voltage, adjustable output voltage 20-30V
max. 400w output power at a maximum current of 17a
wide input voltage range: 20-35V
Protection class ip43, galvanic isolation 200v dc between input, output and housing
can be connected in parallel with similar devices for increased performance
remote on/off switch
high efficiency of 87%
Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries.
remote on/off switch
The remote on/off connector eliminates the need for a high-current switch in the input wiring. The remote on/off connection can be controlled by a power save switch or by the motor's run/stop switch (see manual).
Scope of delivery:
1x Victron Energy ori242441110 Orion-Tr 24/24-17 17a 400w dc-dc voltage converter
The Orion-Tr 24/24-17 from Victron Energy (mpn ori242441110) is an electrically isolated dc-dc voltage converter and provides regulated dc voltage for...
Shipped in 1-3 days
Shipped in 1-3 days
1-67-012285
Victron Orion-Tr 12/24-10 240w dc-dc voltage converter isolated
The Orion-Tr 12/24-10 from Victron Energy (mpn ori1224110) is a galvanically isolated dc-dc voltage converter and provides regulated dc voltage for trouble-free operation of your dc loads. The compact Orion-TR dc-dc voltage converter converts dc input voltage (8-17v) to a regulated 24v output voltage (20-30v) and delivers a constant continuous current of 10a, which is equivalent to 240w of power. Thanks to the Orion-Tr 12/24-10, you can supply any 24v load with exactly the right voltage. The correct voltage is guaranteed even with longer lines, because the Orion can adjust the voltage to any line losses that occur. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. Furthermore, the Orion-Tr 12/24-10 can be connected in parallel with devices of the same design and has a remote-controlled on/off switch. important features of the Orion-Tr 12/24-10 240w (with galvanic isolation) Victron Energy part number: ori1224110 for 12v battery voltage, adjustable output voltage 20-30V max. 240w output power at a maximum current of 10a wide input voltage range: 8-17V Protection class ip43, galvanic isolation 200v dc between input, output and housing can be connected in parallel with similar devices for increased performance remote on/off switch high efficiency of 87 Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries. remote on/off switch The remote on/off connection eliminates the need for a high current switch in the input wiring. The remote on/off connection can be controlled with a power saving switch or by the motor's run/stop switch (see manual). Scope of delivery: 1x Victron Energy ori1224110 Orion-Tr 12/24-10 10a 240w dc-dc voltage converter
The Orion-Tr 12/24-10 from Victron Energy (mpn ori1224110) is a galvanically isolated dc-dc voltage converter and provides regulated dc voltage for tr...
Shipped in 1-3 days
Shipped in 1-3 days
Topseller
VAT-exempt delivery possible*
Top seller
8-01-005815
1.5m 6mm² MC4 Connection Cable Plug/Socket Extension
1.5m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The equipped MC4-connectors are as well German originals made by MultiContact. The final assembly of these cables takes place in our manufactory in Lower Bavaria.
This connection cable is fabricated with professional tools to ensure an extremely high tensile strength which resists even hardest conditions and constant environmental influences.
Application:
ideal for flexible connections of solar modules on different roof sides or module rows
for parallel connection of solar modules
Advantages:
Plug and Play - unpack and install - you do not need any professional tools
irradiated solar cable (only two producers worldwide provide this technology)
planning certainty thanks to a long manufacturer's warranty of 10 years
available in different lengths and colors and therefore suitable for nearly every task
Technical data:
cable type: Lapp Ölflex XLR-R 6mm² TÜV- and UL-certified
max. voltage: 1000V
length: 1.5m
equipped with 1x MC4 male + 1x MC4 female
1.5 Meter (€6.82* / 1 Meter)
Content: 1.5 Meter (€6.82* / 1 Meter)
1.5m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
Top seller
More versions available
8-01-013602
10m connection cable micro changeover switch with Betterie bc01 socket to earthed socket (plug angled)
The 10m Plug & Play Micro Inverter connection cable from Offgridtec (mpn 8-01-013602) connects your micro inverter (e.g.Envertech) with a standard grounded socket (Schuko). The cable is equipped with the Betteri bc01 socket part on the inverter side and an angled Schuko plug type f on the socket side. This cable is used for the connection between the micro inverter and your house power supply. special features of the P&P inverter connection cable Immediately ready for use since delivered as Plug & Play version technical features of the 5m Microinverter connection cable Offgridtec-Part number: 8-01-013602 Cable length: 10m Usage; Connection of compatible micro inverters to the house power grid via feed-in socket Cable type: heavy rubber cable H07RN-f 3x2,5 from Lapp-Kabel Connector on socket side: Schuko plug type-f angled Connector on inverter side: Betteri bc01 socket compatible micro inverters EVT Inverter Series from Envertech evt300s / evt560s / EVT1200S TSUN tsol M350/M800 Bosswerk mi300 / MI600 Hoymiles mi-300 / MI-600 a.o. (e.g. Huayu) Scope of delivery: 1x Offgridtec 8-01-013602 10m plug & play connection micro inverter to power outlet
Variants from €44.90*
10 Meter (€5.49* / 1 Meter)
Content: 10 Meter (€5.49* / 1 Meter)
The 10m Plug & Play Micro Inverter connection cable from Offgridtec (mpn 8-01-013602) connects your micro inverter (e.g.Envertech) with a standard...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
Top seller
8-01-005785
1m 6mm² MC4 Connection Cable Plug/Socket Extension
1m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp the leading cable producer in Germany.The equipped MC4-connectors are as well German originals made by MultiContact. The final assembly of these cables takes place in our manufactory in Lower Bavaria.
This connection cable is fabricated with professional tools to ensure an extremely high tensile strength which resists even hardest conditions and constant environmental influences.
Application:
ideal for flexible connections of solar modules on different roof sides or module rows
for parallel connection of solar modules
Advantages:
Plug and Play - unpack and install - you do not need any professional tools
irradiated solar cable (only two producers worldwide provide this technology)
planning certainty thanks to a long manufacturer's warranty of 10 years
available in different lengths and colors and therefore suitable for nearly every task
Technical data:
cable type: Lapp Ölflex XLR-R 6mm² TÜV- and UL-certified
max. voltage: 1000V
length: 1m
equipped with 1x MC4 male + 1x MC4 female
1m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp the leading cable producer in Germany.The eq...
Soon available again
Soon available again
Top seller
8-01-004950
2,5mm² standard flat fuse holder incl. cable
This fuse holder is fully insulated, the housing is made of rubber, or fully potted. The fuse is additionally protected from corrosion by the cover. The holder is suitable for trucks, cars and much more. You can protect electronic components quickly and easily against overvoltages. You can find suitable flat fuses in our assortment.suitable for truck, car and 12v / 24v solar systems.Technical details:Rated current: max. 20ALxWxH 40x17x45mmTotal length: 25cmsplash water protected by rubber capHousing and cover made of solid rubberfor standard atc / car fusesCable cross section: approx. 2,5mm²/AWG14non-slip surface, therefore easy to open even when wetScope of delivery:1 holder without fuse
0.25 Meter (€7.16* / 1 Meter)
Content: 0.25 Meter (€7.16* / 1 Meter)
This fuse holder is fully insulated, the housing is made of rubber, or fully potted. The fuse is additionally protected from corrosion by the cover. T...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
Top seller
8-01-005795
2m 6mm² MC4 Connection Cable Plug/Socket Extension
2m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The equipped MC4-connectors are as well German originals made by MultiContact. The final assembly of these cables takes place in our manufactory in Lower Bavaria.
This connection cable is fabricated with professional tools to ensure an extremely high tensile strength which resists even hardest conditions and constant environmental influences.
Application:
ideal for flexible connections of solar modules on different roof sides or module rows
for parallel connection of solar modules
Advantages:
Plug and Play - unpack and install - you do not need any professional tools
irradiated solar cable (only two producers worldwide provide this technology)
planning certainty thanks to a long manufacturer's warranty of 10 years
available in different lengths and colors and therefore suitable for nearly every task
Technical data:
cable type: Lapp Ölflex XLR-R 6mm² TÜV- and UL-certified
max. voltage: 1000V
length: 2m
equipped with 1x MC4 male + 1x MC4 female
2 Meter (€5.60* / 1 Meter)
Content: 2 Meter (€5.60* / 1 Meter)
2m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The e...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
Top seller
8-01-001310
2m Solar Profile Rail 4x4cm aluminium - sold by the meter
For a quick and easy installation of solar modules. These rails can be used for all common module types for flat roofs, pitch roofs or field systems.
Length: 1mMaterial: aluminiumUpper mounting channel: solar sliding block M8 Slot 8Lower mounting channel: hex bolt / t-head bolt (DIN 933 M10)Dimensions: 4x4cm
These profiles are compatible with all installation equipment we offer.
As they are used for substructures these profile might have some slight scratches on the surface.
Note:Because of delivery costs these rails are normally delivered with a max. length of 2m. If a longer rail is needed (max. 6.1m) please contact us.
Alternatively it is possible to connect several profile rails with rail connectors until the needed length is reached. These connectors are alsoavailable in our shop.
For a quick and easy installation of solar modules. These rails can be used for all common module types for flat roofs, pitch roofs or field systems.
...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
Top seller
8-01-001325
2m Solar Profile Rail 4x4cm aluminium (upside sliding block)
Profile rails for quick and easy mounting of solar modules. Suitable for all common module types on flat and pitched roofs as well as for ground-mounted systems.PropertiesLength per article: 1.5 mMaterial: aluminumMounting channel top: solar slot stone m8 slot 8Mounting channel bottom: hexagon screw din 933 M10Dimensions: 40 x 40 mmOur offered solar profiles are compatible with our offered solar fasteners.These profiles are intended for a substructure and may therefore have scratches on the surface.Notice: By means of the rail connectors available from us, several solar profiles can be connected together to achieve the desired length.Scope of delivery:1x 1.5m solar profile rail
1.25 Meter (€19.92* / 1 Meter)
Content: 1.25 Meter (€19.92* / 1 Meter)
Profile rails for quick and easy mounting of solar modules. Suitable for all common module types on flat and pitched roofs as well as for ground-mount...
Shipped in 2-5 days
Shipped in 2-5 days
VAT-exempt delivery possible*
Top seller
8-01-001320
2m Solar Profile Rail 4x4cm aluminium (upside sliding block)
Profile rails for quick and easy mounting of solar modules. Suitable for all common module types on flat and pitched roofs as well as for ground-mounted systems.PropertiesLength per article: 1.5 mMaterial: aluminumMounting channel top: solar slot stone m8 slot 8Mounting channel bottom: hexagon screw din 933 M10Dimensions 40 x 40 mmOur offered solar profiles are compatible with our offered solar fasteners.These profiles are intended for a substructure and may therefore have scratches on the surface.Notice: By means of the rail connectors available from us, several solar profiles can be connected together to achieve the desired length.Scope of delivery:1x 1.5m solar profile rail
1.5 Meter (€19.93* / 1 Meter)
Content: 1.5 Meter (€19.93* / 1 Meter)
Profile rails for quick and easy mounting of solar modules. Suitable for all common module types on flat and pitched roofs as well as for ground-mount...
Shipped in 2-5 days
Shipped in 2-5 days
Top seller
8-04-001170
2x Battery Pole Adaptors with external thread M8
Battery pole adaptor (+ and -) with external thread for batteries with M8 internal thread
Suitable for Westech Gel batteries 100Ah and 200Ah as well as for batteries with M8 internal thread if you prefer to use a roundpole instead of a M8 bolt.
Pole adaptor set with various connection possibilities for batteris with internal thread to normal pole.
Perfect for caravan and boat owners, yacht sportsman, DIY people and solar systems
Product features:
- M8 external thread
- universal use
- for + and -
- for 6 and 12V batteries
- very robust through high-quality production
- very good conductivity
- Material: Copper with silver alloy
Battery pole adaptor (+ and -) with external thread for batteries with M8 internal thread
Suitable for Westech Gel batteries 100Ah and 200Ah as well a...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
Top seller
8-01-013755
35mm End Clamp for Solar Modules
With 4 end clamps modules can be mounted on profile rails.
Features:
material: aluminuium
opening for M8 screws
frame height of 35mm
dimensions: 70 x 30 x 39mm
With 4 end clamps modules can be mounted on profile rails.
Features:
material: aluminuium
opening for M8 screws
frame height of 35mm
dimensions...
Shipped in 1-3 days
Shipped in 1-3 days
DC DC converter
When it comes to power supply, you need reliable and efficient solutions. Victron Energy offers you these with its DC-DC voltage converters. The powerful and innovative converters are designed to convert and regulate the voltage of the power source. In our range at Offgridtec you will find the perfect choice of DC-DC voltage converters from Victron Energy for every application.
What is a DC-DC converter? - Application and mode of operation
A DC-DC voltage converter is a device that converts electrical energy from one voltage level to another. It is essentially an electrical transformer that converts the voltage from a DC power source, such as a battery, to another DC voltage. This is particularly useful in applications where the power source cannot supply the desired voltage, such as in photovoltaic systems or vehicles.
DC-DC converters from Victron Energy: Orion and Orion-Tr at Offgridtec
Victron Energy is a leading provider of power solutions whose DC-DC voltage converters are among the most efficient and reliable products on the market. DC-DC voltage converters from Victron Energy at Offgridtec are an innovative and powerful way to efficiently convert and regulate the voltage of power sources. Victron's Orion, Orion-Tr and IP67 ranges offer isolated and non-isolated DC-DC converters for 12-48 volts. These feature excellent technical characteristics, with superior reliability, efficiency and protection. The converters are designed to be easy to install and use.
Buy high quality Victron voltage converters online at Offgridtec
Victron Energy's DC-DC voltage converters are the perfect choice for all applications where reliable mobile voltage conversion is required. They are the perfect solution for a wide range of applications, from special vehicles to photovoltaic systems. Their innovative design and advanced technology make them the ideal choice for any project.
Our team of experts is always on hand with experience and expertise if you have any questions about our products and their correct application. Simply call us on +49 8721 91994-00 for advice.
FAQ
- What does a DC-DC converter do? A DC-DC converter works with a direct current (DC) input voltage and converts it into another output voltage.
- When do I need a DC-DC converter? DC-DC converters are used for a variety of applications, e.g. in photovoltaic systems, vehicles or other drive systems, when higher, lower or negative voltages are required for end devices and thus need to be converted.
- What do I need a DC-DC converter for? DC-DC converters, also called DC-DC converters or DC-DC converters, convert DC voltage into a higher, lower or negative output voltage.
- Which DC-DC converter is the best? Victron Energy is a leading provider of power solutions. Its DC-DC voltage converters are among the most efficient and reliable products on the market. At Offgridtec you will find the ideal Victron Energy model for your purposes.