The 120 watt etfe-al semi-flexible solar panel from Offgridtec (3-01-011050) is based on a new, groundbreaking material composition (aluminum-etfe) and is equipped with highly effective mono-cells from Germany. The output voltage is 19,8v dc which makes it very interesting for a wide range of application scenarios. It is also walkable and much more slip resistant than its predecessors making it the perfect choice for marine and mobile applications. The power is supplied by the latest high efficiency cells, which thanks to current technology have a remarkable cell efficiency and also stand out from the crowd with low power degradation values. Unique selling points of the etfe-al series of Offgridtec On the front side of the module, 2 superimposed etfe layers ensure solid protection of the inner cells and a high light yield for many years. Thanks to a new structure of the outermost layer, slip inhibition has been significantly improved and the module can be walked on without any problems. Long-term higher yields due to better light transmission and significantly less clouding of the transparent etfe front layers compared to conventional solar modules with different front coatings. In addition, the solid etfe front provides strong protection against hail and makes the module absolutely resistant to salt water. Current management is handled by 5 busbars, ensuring solid throughput without heat loss even at high currents. The integrated AL backsheet virtually eliminates the occurrence of cell cracks due to mishandling or mounting. The series is equipped with highly effective solar cells (Made in Germany), which offer a high cell efficiency of 18.43 percent. The final production of the modules is carried out using the most modern manufacturing processes. Technical features of the etfe-al Power (Pmax): 120 Wp Voltage (Vmp): 19,8 V max. current (Imp): 6,06 A Short circuit current (Isc): 6,55 A Open-circuit voltage (Voc): 23.3 V max. system voltage: 200 V Dimensions: 980 x 680 x 4 mm Weight: 4 Kg Material composition: aluminum, etfe walkable: Yes Bendable: max. 10° (L) Scope of delivery: 1x Offgridtec 3-01-011050 etfe-al 120w 20v semi-flexible solar panel alu backsheet

The 160 watt etfe-alu semi-flexible solar panel from Offgridtec (3-01-012500) is based on a new, groundbreaking material composition (aluminum-etfe) and is equipped with highly effective mono-cells. The output voltage is 12vdc which makes it very interesting for a wide range of application scenarios. It is also walkable and much more slip resistant than its predecessors making it the perfect choice for marine and mobile applications. The power is supplied by state-of-the-art solar cells, which, thanks to the latest technology, have a remarkable cell efficiency and also stand out from the crowd due to low power degradation values. Unique selling points of the etfe alu series from Offgridtec On the front side of the module, 2 superimposed etfe layers ensure solid protection of the inner cells and a high light yield for many years. Thanks to a new structure of the outermost layer, the slip inhibition has been significantly improved and the module can be walked on without any problems. Long-term higher yields due to better light transmission and significantly less clouding of the transparent etfe front layers compared to conventional solar modules with different front coatings. In addition, the solid etfe front provides strong protection against hail and makes the module absolutely resistant to salt water. Current management is handled by 5 busbars, ensuring solid throughput without heat loss even at high currents. Due to the integrated alu-backsheet, the occurrence of cell cracks due to incorrect handling or mounting is almost impossible. The etfe-Alu series is equipped with state-of-the-art mono-cells, which offer a high cell efficiency of <22 percent. The final production of the modules is carried out using state-of-the-art manufacturing processes. Technical features of the etfe-alu Power (Pmax): 160 Wp Voltage (Vmp): 19,8 V max. current (Imp): 8,08 A Open-circuit voltage: 23.3 V Short circuit current (Isc): 8,73 A max. system voltage: 200 V Dimensions: 1260 x 680 x 4 m Weight: 6.3 Kg Material composition: aluminum, etfe walkable: Yes Bendable: max. 10° (L) Scope of delivery: 1x Offgridtec 3-01-012500 etfe-alu 160w 12v semi flexible solar panel alu backsheet

The 100w etfe-al semi-flexible solar panel from Offgridtec (3-01-011045) is based on a new, groundbreaking material composition (aluminum-etfe) and is equipped with highly effective mono-cells. The output voltage is 19,8v dc which makes it very interesting for a wide range of application scenarios. It is also walkable and much more slip resistant than its predecessors making it the perfect choice for marine and mobile applications. The power is supplied by state-of-the-art solar cells, which, thanks to the latest technology, have a remarkable cell efficiency and also stand out from the crowd due to low power degradation values. Unique selling points of the etfe-al series of Offgridtec On the front side of the module, 2 superimposed etfe layers ensure solid protection of the inner cells and a high light yield for many years. Thanks to a new structure of the outermost layer, slip inhibition has been significantly improved and the module can be walked on without any problems. Long-term higher yields due to better light transmission and significantly less clouding of the transparent etfe front layers compared to conventional solar modules with different front coatings. In addition, the solid etfe front provides strong protection against hail and makes the module absolutely resistant to salt water. Current management is handled by 5 busbars, ensuring solid throughput without heat loss even at high currents. Due to the integrated AL backsheet, the occurrence of cell cracks due to incorrect handling or mounting is almost impossible. The series is equipped with the best solar cells, which offer a high cell efficiency of 22,3 percent. The final production of the modules is carried out using the most modern manufacturing processes. Technical characteristics of the etfe-al Power (Pmax): 100 Wp Voltage (Vmp): 19,8V max. current (Imp): 5,05 A Short circuit current (Isc): 5,45 A max. system voltage: 200V Dimensions: 680 x 830 x 4 mm Weight: 4 Kg Material composition: aluminum, etfe walkable: Yes Bendable: max. 10° (L) Scope of delivery: 1x Offgridtec 3-01-011045 etfe-al 100w 12v semi-flexible solar panel alu backsheet

The Offgridtec 010895 etfe spr-f-100 120w is a semi-flexible high power solar cell that is ideally suited as a solar panel for the motorhome, as well as specifically for marine use on sailing yachts, motor yachts and other types of boats. The module is best suited for 12v system voltages. The etfe 120w 12v solar cell is flexible and compared to the standard 120 watt flex solar panel, it can also be walked on without hesitation when fully bonded. The surface of the plastic solar glass made of etfe is slightly corrugated which makes it walkable even when wet.   etfe high-tech plastic solar glass combined with spr high-performance cells The front side of the solar panel is covered with a high-tech plastic layer which is based on ethylene-tetrafluoroethylene copolymer etfe - a teflon derivative (ptfe) - and offers excellent protection against harmful environmental influences and is also suitable for use in salt water. etfe is lighter and at the same time more translucent than other plastic solutions on the market. Together with the installed spr (Sunpower) high-performance cells from American production, these two components form an optimal basis for a marine solar panel of the upper class.   technical features of the etfe spr-f-100 120w solar panel 120w rated power with operating voltage of 19,8v and current of 6,05A walkable and even in wet condition more slip resistant than comparable solar modules on the market semi-flexible - bendable up to a maximum of 30 degrees easy mounting of the solar panel by gluing or using the ring eyelets specially designed for long-term marine use etfe High-Tec plastic ensures weight saving and at the same time high light transmission of max. 96 equipped with market-leading high-performance solar cells from Sunpower for maximum efficiency Junction box with IP65 protection easy installation thanks to pre-assembled solar cables with mc4 plug and socket small dimensions (LxWxH): 1070 x 540 x 2mm Mounting of the solar panel by gluing or using the ring eyelets Manufacturer part number (mpn): 010895 light weight: only 2,08 KG proven Offgridtec quality: made exclusively from premium raw materials of the highest quality grade about the etfe series The Offgridtec etfe solar panel series consists of a total of 7 modules in the power range from 20w to a maximum of 150w. More information about the technical characteristics of etfe series can also be found in the official brochure. Scope of delivery: Offgridtec 3-01-010895 etfe spr-f-100 120w 12v solar panel flexible

The Offgridtec 010905 etfe spr-f 165w is a semi-flexible high power solar cell that is ideally suited as a solar panel for the motorhome, as well as specifically for marine use on sailing yachts, motor yachts and other types of boats. The module is best suited for 12v system voltage, in conjunction with an MPPT charge controller. The etfe 165w 12v solar cell is flexible and can also be walked on without hesitation when fully bonded. The surface of the plastic solar glass made of etfe is slightly corrugated which makes it walkable even when wet. etfe, high-tech plastic solar glass combined with spr high-performance cells The front side of the solar panel is covered with a high-tech plastic layer based on ethylene-tetrafluoroethylene copolymer etfe - a Teflon derivative (ptfe) - and offers excellent protection against harmful environmental influences and is also suitable for use in salt water environments. etfe is lighter and at the same time more translucent than other plastic solutions on the market. Technical characteristics of etfe spr-f 165w solar module 165w rated power at an operating voltage of 27.3v and a current of 6.05A walkable and even in wet condition more slip resistant than comparable solar modules on the market semi-flexible - bendable up to a maximum of 30 degrees easy mounting of the solar panel by gluing or using the ring eyelets specially designed for long-term marine use etfe High-Tec plastic ensures weight saving and at the same time high light transmission of max. 96% Junction box with IP65 protection easy installation thanks to pre-assembled solar cable with mc4 plug and socket small dimensions (LxWxH): 1460 x 540 x 2mm Mounting of the solar panel by gluing or using the ring eyelets Manufacturer part number (mpn): 010905 light weight: only 3 Kg proven Offgridtec quality: made exclusively from premium raw materials of the highest quality grade Scope of delivery: Offgridtec 3-01-010905 etfe spr-f 165w 27v solar panel flexible

The PCB-ETFE 200W 39V from Offgridtec (MPN 3-01-010845) belongs to the latest generation of semi-flexible solar panels. The PCB-ETFE class sets new standards in the area of stability and reliability through the composition of high-quality materials. While the front side is based on Teflon derivative (PTFE), the back side is made of fibreglass (PCB). In addition, the module works with modern 5-busbar technology. These and other quality features make the PCB-ETFE 200W from Offgridtec a universally applicable product of the upper class that feels just as comfortable on boats as on vehicle roofs or other surfaces and combines stability, maximum reliability and performance like no other. Thanks to its high operating voltage of over 39V, it is ideally suited for 24V systems or 12V systems (12V only in conjunction with MPPT charge controllers that can process a corresponding, maximum module voltage). The PCB-ETFE 200W 39V solar cell is flexible and, compared to normal flexible solar cells, can also be walked on without hesitation when fully bonded. Features of the PCB-ETFE 200W 39V Solar Panel 200W nominal power, high efficiency and 5-busbar technology equipped with monocrystalline A-grade solar cells cell efficiency of over 22 higher heat tolerance compared to TPT modules thanks to PCB backsheet, thus less susceptible to blistering due to poor adhesion can be walked on and is even more slip-resistant than comparable solar modules on the market, even when wet Semi-flexible - can be bent up to a maximum of 18 degrees (lengthwise) Easy installation of the solar panel by gluing or using the ring eyelets unrestrictedly suitable for salt water, universally applicable ETFE High-Tec plastic ensures weight savings and a high light transmission of max. 96% at the same time Junction box with high protection class IP67 Easy installation thanks to pre-assembled solar cable with MC4 plug and socket Proven Offgridtec quality: manufactured exclusively from premium raw materials of the highest quality level ETFE high-tech plastic on the front side The front of the solar panel is covered with a high-tech plastic layer based on ethylene-tetrafluoroethylene copolymer ETFE - a Teflon derivative (PTFE) - and offers excellent protection against harmful environmental influences and is also suitable for use in salt water. ETFE is lighter and at the same time more translucent than other plastic solutions on the market. Extremely stable fibreglass (PCB) carrier plate as backside The fibreglass back (PCB) makes the module much more stable than conventional panels with a TPT back. This construction offers you the following advantages: prevents bubble formation, which can occur with TPT modules due to incorrect bonding tolerates higher temperatures compared to TPT construction reduces the risk of cell breakage due to accidental overbending of the panel by the user Technical features PCB-ETFE 200W 39V solar panel Working voltage (Vmp): 39.6 V No-load voltage (Voc): 46.61 V max. current (Imp): 5.05 A Short-circuit current (Isc): 5.45 A max. system voltage: 200 V dimensions: 1560 x 680 x 3 mm Weight: 6.2 kg Part number: 3-01-010845 Application areas of the Offgridtec PCB-ETFE series Can be used without restrictions in the marine sector ideally suited for installation on motorhomes, buses and other vehicles for installation on rounded sheet metal roofs recommended for all systems where highest reliability and performance are required ideally suited for suspending e.g. tents when camping, due to the PCB carrier layer the ring eyelets also withstand very high mechanical loads About the PCB-ETFE series This product is the result of accumulated experience from thousands of installations in every conceivable area of application. We were able to successfully establish our first series of flexible solar cells on the market 5 years ago and have since then continuously developed and optimised our modules. With the PCB-ETFE series, you benefit from this unique expertise and can look forward to a durable product that will reliably produce electricity for many years. Scope of delivery: Offgridtec 3-01-010845 PCB-ETFE 200W 39V semiflexibles Solarpanel

The 60W ETFE-AL semi-flexible solar panel from Offgridtec (3-01-011040) is based on a new, groundbreaking material composition (aluminium-ETFE) and is equipped with highly effective mono-cells. The output voltage is 20V DC, which makes it very interesting for a variety of application scenarios. In addition, it is walkable and significantly more slip-resistant than its predecessors, making it the perfect choice for marine and mobile applications. The power is supplied by state-of-the-art solar cells which, thanks to the latest technology, have a remarkable cell efficiency and also stand out from the crowd due to their low power degradation values. Unique selling points of the ETFE-AL series from Offgridtec On the front of the module, 2 superimposed ETFE layers ensure solid protection of the inner cells and a high light yield for many years. Thanks to a new structure of the outermost layer, the slip inhibition has been significantly improved and the module can be walked on without any problems. Long-term higher yields due to better light transmission and significantly less clouding of the transparent ETFE front layers compared to conventional solar modules with different front coatings. In addition, the solid ETFE front offers strong protection against hail and makes the module absolutely resistant to salt water. Power management is handled by 5 busbars, ensuring solid throughput without heat loss even at high currents. Due to the integrated AL backsheet, the occurrence of cell cracks due to incorrect handling or installation is almost impossible. The series is equipped with the best solar cells, which offer a high cell efficiency of 22.3 percent. The final production of the modules is carried out using the most modern manufacturing processes. Technical features of the ETFE-AL Power (Pmax): 60 Wp Voltage (Vmp): 20 V max. current (Imp): 3.04 A Open-circuit voltage (Voc): 23.3 V Short-circuit current (Isc): 3.27 A max. system voltage: 200 V dimensions: 510 x 760 x 4mm integrated bypass diodes Weight: 3 Kg material composition: aluminium, ETFE walkable: Yes Bendable: max. 10° (L) Scope of delivery: 1x Offgridtec 3-01-011040 ETFE-AL 60W 12V semi-flexible solar module Alu-Backsheet

The Offgridtec 010355 etfe spr-F-30 35w is a high power, high efficiency solar cell that is specifically designed for marine use on sailing yachts, motor yachts and other types of boats. The module is best suited for 12v system voltages. The etfe 35w 12v solar cell is flexible and can also be walked on without hesitation when fully bonded. The surface of the plastic solar glass made of etfe is slightly corrugated which makes it walkable even when wet. etfe high-tech plastic solar glass combined with spr high-performance cells The front side of the solarpal is covered with a high-tech plastic layer which is based on ethylene-tetrafluoroethylene copolymer etfe - a teflon derivative (ptfe) - and offers excellent protection against harmful environmental influences and is also suitable for use in salt water. etfe is lighter and at the same time more translucent than other plastic solutions on the market. Together with the installed spr (Sunpower) high-performance cells from American production, these two components form an optimal basis for a marine solar panel of the upper class. technical features of the etfe spr-F 35w marine solar panel 35w nominal power at an operating voltage of 20.88v and a current of 1.81A walkable and even in wet condition more slip resistant than comparable solar modules on the market semi-flexible - bendable up to a maximum of 30 degrees easy mounting of the solar panel by gluing or using the ring eyelets specially designed for long-term marine use etfe High-Tec plastic ensures weight saving and at the same time high light transmission of max. 96% equipped with market-leading high-performance solar cells from Sunpower for maximum efficiency Junction box with IP67 protection easy installation thanks to pre-assembled solar cables with mc4 plug and socket small dimensions (LxWxH): 750 x 285 x 3mm Mounting of the solar panel by gluing or using the ring eyelets Manufacturer part number (mpn): 010355 light weight: only 0,85 Kg proven Offgridtec quality: made exclusively from premium raw materials of the highest quality grade about the etfe series The Offgridtec etfe solar panel series consists of a total of 7 modules in the power range from 20w to a maximum of 150w. More information about the technical characteristics of the etfe series can also be found in the official brochure. Scope of delivery: 1x Offgridtec etfe spr-F-30 35w marine solar panel flexible, 010355

The pcb-etfe 50w 39v from Offgridtec (mpn 3-01-010830) belongs to the latest generation, semi-flexible solar panels. The pcb-etfe class sets new standards in stability and reliability by the composition of highest quality materials. While the front side is based on the Teflon derivative (ptfe), the back side is made of fiberglass (pcb). The module works with modern 3-busbar technology. These and other quality features make the pcb-etfe 50w from Offgridtec a universally applicable product of the upper class that feels just as comfortable on boats as on vehicle roofs or other surfaces and combines stability, maximum reliability and performance like no other. Thanks to its high operating voltage of 39v, it is ideally suited for 24v systems or 12v systems (12v only in conjunction with mppt charge controllers that can handle a corresponding maximum module voltage). The pcb-etfe 50w 12v solar cell is flexible and, compared to normal flexible solar cells, can also be walked on without hesitation when fully bonded. Technical characteristics pcb-etfe 50w 39v solar panel 50w rated power, high efficiency and 3-busbar technology equipped with monocrystalline A-grade solar cells higher heat tolerance compared to tpt modules thanks to PCB backsheet, thus less susceptible to bubble formation due to inadequate bonding walkable and even in wet condition more slip resistant than comparable solar modules on the market semi-flexible - can be bent up to a maximum of 18 degrees (lengthways) easy mounting of the solar panel by gluing or using the ring eyelets unrestrictedly suitable for salt water, universally applicable etfe High-Tec plastic ensures weight saving and at the same time a high light transmission of max. 96% Junction box with high protection class IP67 easy installation thanks to pre-assembled solar cable with mc4 plug and socket proven Offgridtec quality: manufactured exclusively from premium raw materials of the highest quality grade etfe high-tech plastic on the front side The front side of the solar panel is covered with a high-tech plastic layer based on ethylene-tetrafluoroethylene copolymer etfe - a teflon derivative (ptfe) - and offers excellent protection against harmful environmental influences and is also suitable for use in salt water. etfe is lighter and at the same time more translucent than other plastic solutions on the market.   Extremely stable fiberglass (pcb) backing plate as backside The fiberglass (pcb) backing makes the module much more stable than conventional panels with tpt backing. This structure offers you the following advantages: prevents bubbling that can occur with tpt modules due to incorrect bonding tolerates higher temperatures compared to tpt assembly reduces the risk of cell breakage due to accidental over-bending of the panel by the user Technical features pcb-etfe 50w 36v solar panel Working voltage (Vmp): 39,6 V Open circuit voltage (Voc): 46,61 V max. current (Imp): 1,26 A Short circuit current (Isc): 1,36 A max. system voltage: 200 V Dimensions: 510 x 590 x 3 mm Weight: 2,5 Kg Part number: 3-01-010830 Application areas of the Offgridtec pcb-etfe series can be used without restrictions in the marine sector best suitable for mounting on motorhome, bus and other vehicles for installation on rounded sheet metal roofs recommended for all systems where highest reliability and performance are required ideally suited for suspension e.g. tents when camping, due to the PCB carrier layer the ring eyelets also withstand very high mechanical loads about the pcb-etfe series This product is the result of accumulated experience from thousands of installations in every imaginable field of application. Already 5 years ago we were able to successfully establish our first series of flexible solar cells on the market and since then we have continuously developed and optimized our modules. With the pcb-etfe series, you benefit from this unique expertise and can look forward to a durable product that will reliably produce electricity for many years. Scope of delivery: Offgridtec 3-01-010830 pcb-etfe 50w 39v semi-flexible solar panel    

The pcb-etfe 100w 39v from Offgridtec (mpn 3-01-010835) belongs to the latest generation, semi-flexible solar panels. The pcb-etfe class sets new standards in stability and reliability by the composition of highest quality materials. While the front side is based on Teflon derivative (ptfe), the back side is made of fiberglass (pcb). In addition, the module works with modern 3-busbar technology. These and other quality features make the pcb-etfe 100w from Offgridtec a universally applicable product of the upper class that feels just as comfortable on boats as on vehicle roofs or other surfaces and combines stability, maximum reliability and performance like no other. Thanks to its high operating voltage of 39,6v, it is ideally suited for 24v systems or 12v systems (12v only in conjunction with mppt charge controllers that can handle a corresponding maximum module voltage). The pcb-etfe 100w 12v solar cell is flexible and, compared to normal flexible solar cells, can also be walked on without hesitation when fully bonded. Technical characteristics pcb-etfe 100w 36v solar panel 100w rated power, high efficiency and 3-busbar technology equipped with monocrystalline A-grade solar cells higher heat tolerance compared to tpt modules thanks to PCB backsheet, thus less susceptible to bubble formation due to poor adhesion walkable and even in wet condition more slip resistant than comparable solar modules on the market semi-flexible - can be bent up to a maximum of 18 degrees (longitudinally) easy mounting of the solar panel by gluing or using the ring eyelets unrestrictedly suitable for salt water, universally applicable etfe High-Tec plastic ensures weight saving and at the same time a high light transmission of max. 96% Junction box with high protection class IP67 easy installation thanks to pre-assembled solar cable with mc4 plug and socket proven Offgridtec quality: manufactured exclusively from premium raw materials of the highest quality grade etfe high-tech plastic on the front side The front side of the solar panel is covered with a high-tech plastic layer based on ethylene-tetrafluoroethylene copolymer etfe - a teflon derivative (ptfe) - and offers excellent protection against harmful environmental influences and is also suitable for use in salt water. etfe is lighter and at the same time more translucent than other plastic solutions on the market.   Extremely stable fiberglass (pcb) backing plate as backside The fiberglass (pcb) backing makes the module much more stable than conventional panels with tpt backing. This structure offers you the following advantages: prevents bubble formation, which can occur with tpt modules due to incorrect bonding tolerates higher temperatures compared to tpt assembly reduces the risk of cell breakage due to accidental over-bending of the panel by the user Technical features pcb-etfe 100w 39,6v solar panel Working voltage (Vmp): 39,6 V Open circuit voltage (Voc): 42.4 V max. current (Imp): 2,53 A Short circuit current (Isc): 2,73 A max. system voltage: 200 V Dimensions: 845 x 680 x 3 mm Weight: 3,8 Kg Part number: 3-01-010835 Applications of the Offgridtec pcb-etfe series can be used without restrictions in the marine sector best suitable for mounting on motorhome, bus and other vehicles for installation on rounded sheet metal roofs recommended for all systems where highest reliability and performance are required ideally suited for suspension e.g. tents when camping, due to the PCB carrier layer the ring eyelets also withstand very high mechanical loads about the pcb-etfe series This product is the result of accumulated experience from thousands of installations in every imaginable field of application. Already 5 years ago we were able to successfully establish our first series of flexible solar cells on the market and since then we have continuously developed and optimized our modules. With the pcb-etfe series, you benefit from this unique expertise and can look forward to a durable product that will reliably produce electricity for many years. Scope of delivery: Offgridtec 3-01-010835 pcb-etfe 100w 39v semi-flexible solar panel