The 200w solar bag from Offgridtec (mpn 013110) is a portable solar module and suitable for those who value flexibility. The module is foldable, lightweight and space-saving, making it suitable for many applications. It can be placed horizontally or with the help of the integrated supports at a 45° angle to ensure the best possible solar yield. Due to the integrated usb-connectors in the handle, you can charge even without charge controller and battery, small consumers. The Offgridtec solar bag is therefore the ideal companion for the spontaneous camping trip and the perfect addition to your outdoor equipment. Features Rated power: 200w High efficiency of 22.3% 2x usb 5v 2a connectors for direct charging Robust and water repellent fabric 5 meter connection cable with Anderson Powerpole connector 1.5 meter battery connection cable with 10a fuse Stand feet with ring eyelets Always ready for use You will achieve the greatest benefit with the solar bag in combination with a charge controller and a battery to store the generated energy. But also solo the foldable module is always ready for use. Through the two usb 5v connections you can charge your cell phone or other small consumers via usb directly at the module. The connections are located directly in the handle of the module, so it is ideal for the spontaneous camping trip. High quality workmanship The 200w solar bag from Offgridtec is both robust and space-saving, giving you a high degree of flexibility. The durable and water-resistant polyamide fabric makes the solar bag the ideal companion for camping trips. As with all Offgridtec solar modules, the solar bag is designed with high quality and durability in mind. We produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver top technical performance even under the most adverse conditions. Flexible Alignability The Offgridtec solar pocket can be aligned to match the position of the sun at any time to generate optimal yields throughout the day. Thanks to the integrated supports, the module is positioned at a 45° angle and can thus capture the last rays of the sun even in spring and autumn, when conventional solar panels produce only low currents due to flat sun angles. Due to its light weight and integrated handles, the bag is easy to transport and ready for use at any time. Technical data Rated power: 200w Module voltage (Vmp): 20V Max. Charge current (Imp): 10a Open circuit voltage (Voc): 24V Short circuit current (Isc): 10.8A Cell efficiency: 22.3% Tolerance: ±3% Temperature coefficient: -0.38%/°C Dimensions closed: 605 x 535 x 45 mm Dimensions opened: 2250 x 535 x 22.5 mm Weight 7.5 kg incl. carrying bag Connection Kit included Scope of delivery: 1x Offgridtec solar bag 200w 1x 5 meter connection cable with Anderson Powerpole plug 1x 1,5m battery connection cable with 10a fuse

The FSP-Max 440w from Offgridtec (mpn 014560) is a foldable high-end solar module with connection kit, as well as firmly integrated fold-out supports, in order to be able to set up the module easily and everywhere at a 45 degree angle. The module is equipped with high-efficiency monocrystalline solar cells and delivers 440w of solar power in optimal orientation and sunshine. The combination of the compact dimensions when closed and the low total weight of just under 13kg sets new standards in terms of flexibility and efficiency of mobile solar modules. The supply of mobile or permanently installed energy storage units is thus possible flexibly and easily. The solution for solar-assisted mobile battery charging In the camping area For expeditions For vehicles and boats without fixed solar installation For off-grid power supply at home And numerous other applications in a wide variety of areas Important features: High output power Compatible with a wide range of 1-2.5 kWh mobile power stations Made of high quality polymer composite Quickly assembled and connected Cell efficiency of over 22 Compact dimensions With practical carrying handle and protective bag Easy to use anywhere Four feet are permanently attached to the solar case, which can be easily folded out if necessary to place the panel on the ground at a bang 45 degrees. Thus, the module is fully assembled and ready for use within a minute. The angled orientation ensures an ideal solar yield. In combination with the low weight, the folding module with the compact dimensions and the practical carrying handle is suitable for many different applications and is without much effort, quickly ready for use. The included Profi-Connection Kit The connection kit included in the scope of delivery contains everything that is needed for a quick start-up of the mobile solar module. It has a 6m connection cable, which is equipped with a high-quality Anderson connector at one end. Matching to this, a second 0.5m connection cable is included, which is screwed directly to the solar input of your charge controller and is equipped with the corresponding Anderson connector on the other end. This allows you to connect or disconnect the controller at any time via the Anderson connectors without having to unscrew the cables from the charge controller. For the connection of the charge controller to your battery, a 1m long plug&play connection cable is also included. This is screwed to the battery input of the controller and is equipped with universal alligator clips on the battery side, ,which can be easily connected to all common battery terminals. In addition, the battery cable has a flat fuse holder with appropriate fuse. With the 6m connection cable can, with a suitable adapter, also be connected to a suitable power station (with integrated charge controller) Technical data Rated power (Pmax): 440w (4x110W) Module voltage (Vmp): 40v Module current max (Imp): 11a Open circuit voltage (Voc): 48v Short circuit current (Isc): 12a Max. System voltage: 200V/DC Cell efficiency: 22.62% Cell type: Monocrystalline Weight: 13.2kg Dimensions closed: 1072 x 547 x 90 mm Dimensions opened: 1072 x 2188 x 22.5 mm Scope of delivery: 1x Offgridtec FSP-Max 440w foldable solar panel 1x professional connection kit 1x protective bag

The Offgridtec bms200 12v solar case (010515) delivers a whopping 200w of solar power and comes as a complete solution ready for immediate use. The case is based on 2 high quality 100w mono solar panels and comes standard without charge controller - so you can use your preferred controller with the help of the connection cable kit. Furthermore, the case has 2 solid supports, for setting up the case. The supports can be easily and conveniently adjusted to the conditions of the ground via stainless steel wing nuts and optimally adjust the inclination to the sun. The high-quality connection cable set completes the system. It is based on extremely solid h07rnf rubber cables which defy even the most adverse conditions. The battery connection cable is equipped with alligator clips on the battery side, which you can safely and quickly clamp to the terminal of your battery. For additional safety, the integrated flat fuse holder which is equipped with a standard flat fuse from the automotive sector. This can be easily replaced if necessary. Features integrated aluminum elevation for floor installation integrated connection cable set for immediate use high quality mono solar cells - identical to the mono cells in our solar modules freely adjustable tilt angle for optimal yield at any time of the year comfortable black anodized carrying handle with fabric cover including bag for safe transport of your mobile power plant Technical data Solar power: 200wp max. charging current (Imp): 10.10A Voltage (vmp): 19.8v HAN: 010515 Model: bms200 Dimensions opened (without elevation): 1360 x 780 x 35 mm (LxWxH) Dimensions closed: 680 x 780 x 70mm (LxWxH) Weight: 15Kg 2x Offgridtec® 100w mono 12v solar panel - Manufacturer Offgridtec - Generator power (wp): 100 wp - Module voltage (vmp): 19,8 v - max. current (imp): 2x 5,05 A - Open circuit voltage (voc): 23,3 v - Short circuit current (Isc): 2x 5,46 A connection cable set - 6,0m 5mm² connection cable from solar case to solar charge controller with Anderson connector on solar side - 0,5m 5mm² connection cable Anderson connector to wire end sleeve (for fixed screw connection to charge controller) - 0,5m battery connection cable solar charge controller to battery with pre-mounted tapping terminals on the battery side for immediate use Scope of delivery: 1x Offgridtec bms200 solar case 200w 12 v 3-01-010515 1x connection cable set for charge controller (charge controller not included) and battery connection cable

The 100w solar bag from Offgridtec (mpn 012715) is a portable solar module and suitable for those who value flexibility. The module is foldable, lightweight and space-saving, making it suitable for many applications. It can be placed horizontally or at a 45° angle using the integrated supports to ensure the best possible solar yield. In good weather, the module can generate approximately 500-550Wh of energy per day. Due to the integrated usb-connectors in the handle, you can also charge small consumers without charge controller and battery. The Offgridtec solar bag is therefore the ideal companion for the spontaneous camping trip and the perfect addition to your outdoor equipment. Features Rated power: 100w High efficiency of 22.3% 2x usb 5v 2a connectors for direct charging Robust and water repellent fabric 5 meter connection cable with Anderson Powerpole connector 1.5 meter battery connection cable with 10a fuse Stand feet with ring eyelets Always ready for use You will achieve the greatest benefit with the solar bag in combination with a charge controller and a battery to store the generated energy. But also solo the foldable module is always ready for use. Through the two usb 5v connections you can charge your cell phone or other small consumers via usb directly at the module. The connections are located directly in the handle of the module, so it is ideal for the spontaneous camping trip. High quality workmanship The 100w solar bag from Offgridtec is both robust and space-saving, giving you a high degree of flexibility. The durable and water-resistant polyamide fabric makes the solar bag the ideal companion for camping trips. As with all Offgridtec solar modules, the solar bag is designed with high quality and durability in mind. We produce our solar modules according to current norms and standards which, together with the high-quality materials, makes our modules high-end products that deliver top technical performance even under the most adverse conditions. Flexible alignability The Offgridtec solar pocket can be aligned to match the position of the sun at any time to generate optimal yields throughout the day. Thanks to the integrated supports, the module is positioned at a 45° angle and can thus capture the last rays of the sun even in spring and autumn, when conventional solar panels produce only low currents due to flat sun angles. Its light weight and integrated handles make it easy to transport and ready for use at any time. Technical data: Rated power: 100w Module voltage (Vmp): 20V Max. Charge current (Imp): 5.06A Open circuit voltage (Voc): 23.3V Short circuit current (Isc): 5.45A Cell efficiency: 22.3% Max. System voltage: 200 VDC Tolerance: ±3% Temperature coefficient: -0.38%/°C Dimensions closed: 605 x 535 x 45 mm Dimensions opened: 1200 x 535 x 22.5 mm Weight: 4.85 kg incl. carrying bag Connection Kit included Scope of delivery: 1x Offgridtec solar bag 100w 1x 5 meter connection cable with Anderson Powerpole plug 1x 1,5 meter battery connection cable with 10a fuse