Charge Controller Accessories
Filter
–
Charge Controller Accessories
6 Results
Sorting
VAT-exempt delivery possible*
8-01-006020
Offgridtec Professional 5m 4mm² Cable - module to charge controller
This two-cored solar cable connects charge controller and solar modules within a system in a professional way.On the module side it is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules.Most modules work with MC4-plugs. If not you'll find fitting adaptors in our shop.
All components are prepared with professional tools and provide a high connection quality. The cable is manufactured in our factory in Lower Bavaria.
Data cable:
diameter 4mm
double-isolated
very flexible
VDE 0295 class 5 and IEC 60228
resistant against UV, ozone, weather,water, chemicals, oil
fire-resistant according to VDE 0482-332-2, DIN
safe from touch
protection IP: unplugged - IP2X; plugged - IP67
temperature range: -40° ...60° C
isolation material: PA
locking-system: snap-in
cable strain relief according to IEC 61984
contact system: MC Multilam
contact material: tinned copper
flame class: UL94-V0
protection class II
system voltage up to 1000V
Data ferrules:
material: tinned copper
length: 12mm
5 Meter (€3.73* / 1 Meter)
Content: 5 Meter (€3.73* / 1 Meter)
This two-cored solar cable connects charge controller and solar modules within a system in a professional way.On the module side it is equipped with o...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
This two-cored solar cable connects charge controller and solar modules within a system in a professional way.On the module side it is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules.Most modules work with MC4-plugs. If not you'll find fitting adaptors in our shop.
All components are prepared with professional tools and provide a high connection quality. The cable is manufactured in our factory in Lower Bavaria.
Data cable:
diameter 4mm
double-isolated
very flexible
VDE 0295 class 5 and IEC 60228
resistant against UV, ozone, weather,water, chemicals, oil
fire-resistant according to VDE 0482-332-2, DIN
safe from touch
protection IP: unplugged - IP2X; plugged - IP67
temperature range: -40° ...60° C
isolation material: PA
locking-system: snap-in
cable strain relief according to IEC 61984
contact system: MC Multilam
contact material: tinned copper
flame class: UL94-V0
protection class II
system voltage up to 1000V
Data ferrules:
material: tinned copper
length: 12mm
Shipped in 1-3 days
5 Meter (€3.73* / 1 Meter)
Content: 5 Meter (€3.73* / 1 Meter)
8-01-011220
Offgridtec® USB interface for mppt Pro Duo
The USB interface cable (mpn 8-01-01120) connects a mppt Pro Duo or a psi sine wave voltage converter to a computer or notebook. Together with the free pc software (Windows only), you can conveniently read out and comprehensively configure your device comprehensive configurations can be set easier and faster via a notebook / pc compatible with mppt Pro duo charge controllers and psi sine wave voltage converters from Offgridtec Plug & Play Connector - plug in and go Scope of delivery: 8-011220 USB interface cable
The USB interface cable (mpn 8-01-01120) connects a mppt Pro Duo or a psi sine wave voltage converter to a computer or notebook. Together with the fre...
Shipped in 1-3 days
Shipped in 1-3 days
8-01-011220
Offgridtec® USB interface for mppt Pro Duo
The USB interface cable (mpn 8-01-01120) connects a mppt Pro Duo or a psi sine wave voltage converter to a computer or notebook. Together with the free pc software (Windows only), you can conveniently read out and comprehensively configure your device comprehensive configurations can be set easier and faster via a notebook / pc compatible with mppt Pro duo charge controllers and psi sine wave voltage converters from Offgridtec Plug & Play Connector - plug in and go Scope of delivery: 8-011220 USB interface cable
Shipped in 1-3 days
8-01-004610
EBL Cable Set to Charge Controller connection cable 1m
This cable is used to connect all common charge controllers to a Schaudt-EBL.
Features:
length 1m
for all common charge controllers
Delivery scope:1 x EBL connection cable 1m
This cable is used to connect all common charge controllers to a Schaudt-EBL.
Features:
length 1m
for all common charge controllers
Delivery sco...
Shipped in 1-3 days
Shipped in 1-3 days
This cable is used to connect all common charge controllers to a Schaudt-EBL.
Features:
length 1m
for all common charge controllers
Delivery scope:1 x EBL connection cable 1m
Shipped in 1-3 days
8-03-004065
Steca PA RC100 Remote
Designed for the use with Steca Solsum F, Steca Solarix PRS und Steca Solarix MPPT 2010.
With this remote you can program your Steca solar charge controller. By using its switches all parameters can be adjusted according to your demands.After a restart and pressing the program-button the adjustments are activated.
Details:
low weight
easy installation
maintenance-free
low consumption
very reliable
nightlight function ex works or adjustable via PA RC100
adjustment of parameters
Adjustable Parameters:
battery type: gel/liquid
night-light function
end of charge voltage (float/boost/equal)
deep discharge protection (LVD)
restart threshold
Designed for the use with Steca Solsum F, Steca Solarix PRS und Steca Solarix MPPT 2010.
With this remote you can program your Steca solar charge con...
Shipped in 10-14 Werktage
Shipped in 10-14 Werktage
8-03-004065
Steca PA RC100 Remote
Designed for the use with Steca Solsum F, Steca Solarix PRS und Steca Solarix MPPT 2010.
With this remote you can program your Steca solar charge controller. By using its switches all parameters can be adjusted according to your demands.After a restart and pressing the program-button the adjustments are activated.
Details:
low weight
easy installation
maintenance-free
low consumption
very reliable
nightlight function ex works or adjustable via PA RC100
adjustment of parameters
Adjustable Parameters:
battery type: gel/liquid
night-light function
end of charge voltage (float/boost/equal)
deep discharge protection (LVD)
restart threshold
Shipped in 10-14 Werktage
8-67-008490
Victron Remote Display for BlueSolar PWM-Pro
This Victron Energy remote display (SCC900300000) was especially designed for free programming of charge controllers out of the PWM-PRO-family.The display enables you to adjust the charge contoller's settings according to your needs - even the lighting control. It is big enough to recognize everything easily.Easier and quicker than direct programming on the charge controller via 5 buttons only.
Professional functionality for the Victron PWM PRO series includedNearly every important setting, for example charging voltage, can be done freely via this optional remote panel - a feature normally found only in a higher price range.Among other settings the battery-specific charge and end-of-charge voltage as well as switch-on/off thresholds of the consumer output can be programmed. The remote panel is optional equipment and not part of the charge controllers delivery scope.All possible settings can be found in the manual.
The remote display is compatible with the following Victron charge controllers:SCC010010010 Victron BlueSolar PWM-Pro 12V 24V 10A, Art-Nr 1-67-008445SCC010020110 Victron BlueSolar PWM-Pro 12V 24V 20A, Art-Nr 1-67-008445SCC010030010 Victron BlueSolar PWM-Pro 12V 24V 30A, Art-Nr 1-67-008445
Delivery scope:1x Victron SCC900300000 Remote Panel with LCD-display1x Mounting frame SCC010010010
This Victron Energy remote display (SCC900300000) was especially designed for free programming of charge controllers out of the PWM-PRO-family.The dis...
Shipped in 10-14 Werktage
Shipped in 10-14 Werktage
8-67-008490
Victron Remote Display for BlueSolar PWM-Pro
This Victron Energy remote display (SCC900300000) was especially designed for free programming of charge controllers out of the PWM-PRO-family.The display enables you to adjust the charge contoller's settings according to your needs - even the lighting control. It is big enough to recognize everything easily.Easier and quicker than direct programming on the charge controller via 5 buttons only.
Professional functionality for the Victron PWM PRO series includedNearly every important setting, for example charging voltage, can be done freely via this optional remote panel - a feature normally found only in a higher price range.Among other settings the battery-specific charge and end-of-charge voltage as well as switch-on/off thresholds of the consumer output can be programmed. The remote panel is optional equipment and not part of the charge controllers delivery scope.All possible settings can be found in the manual.
The remote display is compatible with the following Victron charge controllers:SCC010010010 Victron BlueSolar PWM-Pro 12V 24V 10A, Art-Nr 1-67-008445SCC010020110 Victron BlueSolar PWM-Pro 12V 24V 20A, Art-Nr 1-67-008445SCC010030010 Victron BlueSolar PWM-Pro 12V 24V 30A, Art-Nr 1-67-008445
Delivery scope:1x Victron SCC900300000 Remote Panel with LCD-display1x Mounting frame SCC010010010
Shipped in 10-14 Werktage
1,86 %
8-15-002970
Votronic Temperature Sensor
Battery temperature sensor with connection cable 3m and mounting hole M8. It is sealed for protection against environmental pollution. Suitable for all VOTRONIC Automatic Chargers of the series Pb and VAC, charging converters VCC, as well as solar controllers of the series SR and MPP.
Battery temperature sensor with connection cable 3m and mounting hole M8. It is sealed for protection against environmental pollution. Suitable f...
Soon available again
Soon available again
8-15-002970
Votronic Temperature Sensor
1,86 %
Battery temperature sensor with connection cable 3m and mounting hole M8. It is sealed for protection against environmental pollution. Suitable for all VOTRONIC Automatic Chargers of the series Pb and VAC, charging converters VCC, as well as solar controllers of the series SR and MPP.
Soon available again