Voltage Inverter Accessories
16 Results
Sorting
VAT-exempt delivery possible*
HM-95GD-Z587
Offgridtec 3m 4mm² Connection Cable - module to charge controller
This 2-core cable connects charge controller and solar module in a professional way. It is equipped with MC4-connectors (module) and ferrules (charge controller). Most 12V modules have MC4-plugs - if other plugs are needed you find adaptors in our shop.
All components are crimped with professional tools and show excellent connection characteristics. The cables are either made by Helukabel or EBS-Solar, both German manufacturers.
Solar cable:
4mm cable diameter
double-insulated
very flexible
VDE 0295 class 5 and IEC 60228
restistant against UV, ozone, weather, water, chemicals, oil, fire (according to VDE 0482-332-2, DIN)
type of protection (plugged): IP67
temperature range: -40°C to 90°C
insulation material: PA
connection system: snap-in
cable relief according to IEC 61984
contact system: MC4 contact fins
contact material: tinned copper
flame class: UL94-V0
protection class: II
system voltage up to 1000V
Ferrules:
material: tinned copper
length: 12mm
3 Meter (€7.87* / 1 Meter)
Content: 3 Meter (€7.87* / 1 Meter)
This 2-core cable connects charge controller and solar module in a professional way. It is equipped with MC4-connectors (module) and ferrules (charge ...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
8-04-002855
Voltage Monitoring 12V
Protection from deep discharge of AGM, gel and wet batteries
After a delay time of 0 - 10min this relay toggles and interrupts the current flow when the measured voltage falls below a predefined value (V<).
The relay switches back into stand-by mode when the voltage reaches a predefined value V> (end voltage).
Protection from deep discharge of AGM, gel and wet batteries
After a delay time of 0 - 10min this relay toggles and interrupts the current flow when ...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
8-01-010340
Battery connection cable 0,6m 10mm² for inverter series Victron Phoenix 250va - 500va for m8 battery terminal
0.6 Meter (€40.30* / 1 Meter)
Content: 0.6 Meter (€40.30* / 1 Meter)
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
8-04-002856
Voltage Monitoring 24V
The voltage measurement relais monitors the direct current at binding post A1 and A2.
Application:Protection from deep discharge and overload for AGM, GEL and lead acid batteries.
The relais starts working when the measured voltage sinks under a pre-defined value V< (battery is discharged) and the programmed deceleration time of 0-10min has run out. This is displayed by a yellow led warning light.The relais switches back to stand-by mode when the monitored voltage exceeds the pre-defined value V> (end-of-charge voltage)
Supply voltage: 20 - 31V DCPower consumption: 0,8 WattOperation mode: continuous modeMeasurement accuracy: 2% over temperature and voltage rangeRepeating accuracy: +/-2%
Measurement range: Undervoltage: 21 - 25VOvervoltage: 26 - 30VHysteresis: 1V
Contact:Number of changers: 1Contact material: AgSnO2max. switching voltage: 250V ACmax. switching current: 8Amax. switching power: 2000VAmax. switch-on current: 30A
The voltage measurement relais monitors the direct current at binding post A1 and A2.
Application:Protection from deep discharge and overload f...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
8-01-010691
2m Batteriekabel 35mm² M8 Terminal zu Schraubklemmenanschluss
Battery connection cable for WT-Combi-S inverters. This cable can also be used with other inverters (max. 2000W at 12V and max 4000W at 24V).
Delivery scope: 1 x connection cable 35mm² red 2m with eyelets1 x connection cable 35mm² blue 2m with eyelets1 x mega fuse 150A - 300A depending to inverter performance
2 Meter (€29.95* / 1 Meter)
Content: 2 Meter (€29.95* / 1 Meter)
Battery connection cable for WT-Combi-S inverters. This cable can also be used with other inverters (max. 2000W at 12V and max 4000W at 24V).
Deliver...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
8-01-010345
Battery connection cable 0,6m 10mm² for inverter series Victron Phoenix 250va - 500va for m6 battery terminal
0.6 Meter (€40.32* / 1 Meter)
Content: 0.6 Meter (€40.32* / 1 Meter)
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
8-01-010675
Offgridtec® 2m battery cable 35mm² both sides M10 eyelets
Battery connection cable for WT-Combi-S inverters. This cable can also be used with other inverters (max. 2000W at 12V and max 4000W at 24V).
Delivery scope: 1 x connection cable 35mm² red 2m with eyelets1 x connection cable 35mm² blue 2m with eyelets1 x mega fuse 150A - 300A depending to inverter performance
2 Meter (€37.45* / 1 Meter)
Content: 2 Meter (€37.45* / 1 Meter)
Battery connection cable for WT-Combi-S inverters. This cable can also be used with other inverters (max. 2000W at 12V and max 4000W at 24V).
Deliver...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
8-04-002857
Voltage Monitoring 48V
The voltage measurement relais monitors the direct current at binding post A1 and A2.
Application:Protection from deep discharge and overload for AGM, GEL and lead acid batteries.
The relais starts working when the measured voltage sinks under a pre-defined value V< (battery is discharged) and the programmed deceleration time of 0-10min has run out. This is displayed by a yellow led warning light.The relais switches back to stand-by mode when the monitored voltage exceeds the pre-defined value V> (end-of-charge voltage)
Supply voltage: 40 - 62vdcPower consumption: 0,8 WattOperation mode: continuous modeMeasurement accuracy: 2% over temperature and voltage rangeRepeating accuracy: +/-2%
Measurement range: Undervoltage: 42 - 50VOvervoltage: 52 - 60VHysteresis: 1V
Contact:Number of changers: 1Contact material: AgSnO2max. switching voltage: 250V ACmax. switching current: 8Amax. switching power: 2000VAmax. switch-on current: 30A
The voltage measurement relais monitors the direct current at binding post A1 and A2.
Application:Protection from deep discharge and overload f...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
8-04-001111
2m Batteriekabel 35mm² beidseitig M8
Battery connection cable for WT-Combi-S inverters. This cable can also be used with other inverters (max. 2000W at 12V and max 4000W at 24V).
Delivery scope: 1 x connection cable 35mm² red 2m with eyelets1 x connection cable 35mm² blue 2m with eyelets1 x mega fuse 150A - 300A depending to inverter performance
2 Meter (€29.95* / 1 Meter)
Content: 2 Meter (€29.95* / 1 Meter)
Battery connection cable for WT-Combi-S inverters. This cable can also be used with other inverters (max. 2000W at 12V and max 4000W at 24V).
Deliver...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
8-15-007835
Votronic 2272 2m 25mm Battery Connection Cable for SMI 1000 Inverter
Cables for plus- (red) and minus- (black) battery connection of the SMI-inverter "ST".Very flexible and ready to install with tube cable shoes M8.
Length: 2x 2m with M8 tube cable shoeColor: red and blackCable diameter: 25mmDelivery scope: 1x Votronic 2272 (cable set for SMI 1000 / 1000 NVS)
2 Meter (€30.78* / 1 Meter)
Content: 2 Meter (€30.78* / 1 Meter)
Cables for plus- (red) and minus- (black) battery connection of the SMI-inverter "ST".Very flexible and ready to install with tube cable shoes M8.
Le...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
8-15-007830
Votronic 2268 1m 25mm Battery Connection Cable for SMI 1000 Inverter
Cables for plus- (red) and minus- (black) battery connection of the SMI-inverter "ST".Very flexible and ready to install with tube cable shoes M8.
Length: 2x 1m with M8 tube cable shoeColor: red and blackCable diameter: 25mmDelivery scope: 1x Votronic 2268 (cable set for SMI 1000 / 1000 NVS)
Cables for plus- (red) and minus- (black) battery connection of the SMI-inverter "ST".Very flexible and ready to install with tube cable shoes M8.
Le...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
8-04-011112
2m Batteriekabel 35mm² M8 Terminal zu Schraubklemmenanschluss
Battery connection cable for WT-Combi-S inverters. This cable can also be used with other inverters (max. 2000W at 12V and max 4000W at 24V).
Delivery scope: 1 x connection cable 35mm² red 2m with eyelets1 x connection cable 35mm² blue 2m with eyelets1 x mega fuse 150A - 300A depending to inverter performance
2 Meter (€29.95* / 1 Meter)
Content: 2 Meter (€29.95* / 1 Meter)
Battery connection cable for WT-Combi-S inverters. This cable can also be used with other inverters (max. 2000W at 12V and max 4000W at 24V).
Deliver...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
8-15-007845
Votronic 2273 2m 35mm Battery Connection Cable for SMI 1000 Inverter
Cables for plus- (red) and minus- (black) battery connection of the SMI-inverter "ST".Very flexible and ready to install with tube cable shoes M8.
Length: 2x 2m with M8 tube cable shoeColor: red and blackCable diameter: 35mmDelivery scope: 1x Votronic 2273 (cable set for SMI 1500 / 1500 NVS)
2 Meter (€37.76* / 1 Meter)
Content: 2 Meter (€37.76* / 1 Meter)
Cables for plus- (red) and minus- (black) battery connection of the SMI-inverter "ST".Very flexible and ready to install with tube cable shoes M8.
Le...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
7-07-002535
10m Cable Remote for Solartronics Inverters
Optional cable remote for
modified inverters >2000W
sine inverters >1500W
length: 10m
Sold only together with an upgradeable Solartronics inverter.
10 Meter (€5.49* / 1 Meter)
Content: 10 Meter (€5.49* / 1 Meter)
Optional cable remote for
modified inverters >2000W
sine inverters >1500W
length: 10m
Sold only together with an upgradeable Solartronics...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
8-15-007840
Votronic 2269 1m 35mm Battery Connection Cable for SMI 1000 Inverter
Cables for plus- (red) and minus- (black) battery connection of the SMI-inverter "ST".Very flexible and ready to install with tube cable shoes M8.
Length: 2x 1m with M8 tube cable shoeColor: red and blackCable diameter: 35mmDelivery scope: 1x Votronic 2269 (cable set for SMI 1500 / 1500 NVS)
Cables for plus- (red) and minus- (black) battery connection of the SMI-inverter "ST".Very flexible and ready to install with tube cable shoes M8.
Le...
Soon available again
Soon available again
VAT-exempt delivery possible*
8-66-008140
Mastervolt Masterlink MICC
The Mastervolt Masterlink MICC (MPN 70403105) is one of the most advanced 12V 24V battery monitors available at the moment. Moreover it is a convenient remote control for the Mass Sine Inverter series, Mass battery chargers and Mass Combi series.This device combines the following appliances:
state of charge (SOC) of your battery
displays system voltage, system charge or power drain
displays voltage of your starter battery
drained ampere-hours (power meter)
battery's residual capacity
remote control of Mass Sine inverters, Mass battery chargers and Mass Combi
Important product features:
supports 2 batteries - supply battery (displays all stats) and starter battery (displays voltage)
display of voltage, amperage, ampere-hours, residual time, battery capacity in %, displays special battery events
operation of inverter and battery charger
clear LCD-display with green background lighting
wide input voltage range of 9 - 35V DC
high voltage resolution of 0.01V
measures currents up to 500A
Ah-capacity up to 9999A
equipped with a potential-free battery alarm contact
logging of all important battery events for future reference
only 28mA of consumption (display off)
The Mastervolt Masterlink MICC (MPN 70403105) is one of the most advanced 12V 24V battery monitors available at the moment. Moreover it is a convenien...
Soon available again
Soon available again
Topseller
VAT-exempt delivery possible*
Top seller
8-01-005815
1.5m 6mm² MC4 Connection Cable Plug/Socket Extension
1.5m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The equipped MC4-connectors are as well German originals made by MultiContact. The final assembly of these cables takes place in our manufactory in Lower Bavaria.
This connection cable is fabricated with professional tools to ensure an extremely high tensile strength which resists even hardest conditions and constant environmental influences.
Application:
ideal for flexible connections of solar modules on different roof sides or module rows
for parallel connection of solar modules
Advantages:
Plug and Play - unpack and install - you do not need any professional tools
irradiated solar cable (only two producers worldwide provide this technology)
planning certainty thanks to a long manufacturer's warranty of 10 years
available in different lengths and colors and therefore suitable for nearly every task
Technical data:
cable type: Lapp Ölflex XLR-R 6mm² TÜV- and UL-certified
max. voltage: 1000V
length: 1.5m
equipped with 1x MC4 male + 1x MC4 female
1.5 Meter (€6.82* / 1 Meter)
Content: 1.5 Meter (€6.82* / 1 Meter)
1.5m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
Top seller
8-01-005785
1m 6mm² MC4 Connection Cable Plug/Socket Extension
1m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp the leading cable producer in Germany.The equipped MC4-connectors are as well German originals made by MultiContact. The final assembly of these cables takes place in our manufactory in Lower Bavaria.
This connection cable is fabricated with professional tools to ensure an extremely high tensile strength which resists even hardest conditions and constant environmental influences.
Application:
ideal for flexible connections of solar modules on different roof sides or module rows
for parallel connection of solar modules
Advantages:
Plug and Play - unpack and install - you do not need any professional tools
irradiated solar cable (only two producers worldwide provide this technology)
planning certainty thanks to a long manufacturer's warranty of 10 years
available in different lengths and colors and therefore suitable for nearly every task
Technical data:
cable type: Lapp Ölflex XLR-R 6mm² TÜV- and UL-certified
max. voltage: 1000V
length: 1m
equipped with 1x MC4 male + 1x MC4 female
1m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp the leading cable producer in Germany.The eq...
Shipped in 1-3 days
Shipped in 1-3 days
Top seller
8-01-004950
2,5mm² standard flat fuse holder incl. cable
This fuse holder is fully insulated, the housing is made of rubber, or fully potted. The fuse is additionally protected from corrosion by the cover. The holder is suitable for trucks, cars and much more. You can protect electronic components quickly and easily against overvoltages. You can find suitable flat fuses in our assortment.suitable for truck, car and 12v / 24v solar systems.Technical details:Rated current: max. 20ALxWxH 40x17x45mmTotal length: 25cmsplash water protected by rubber capHousing and cover made of solid rubberfor standard atc / car fusesCable cross section: approx. 2,5mm²/AWG14non-slip surface, therefore easy to open even when wetScope of delivery:1 holder without fuse
0.25 Meter (€7.16* / 1 Meter)
Content: 0.25 Meter (€7.16* / 1 Meter)
This fuse holder is fully insulated, the housing is made of rubber, or fully potted. The fuse is additionally protected from corrosion by the cover. T...
Shipped in 1-3 days
Shipped in 1-3 days
Top seller
8-04-001170
2x Battery Pole Adaptors with external thread M8
Battery pole adaptor (+ and -) with external thread for batteries with M8 internal thread
Suitable for Westech Gel batteries 100Ah and 200Ah as well as for batteries with M8 internal thread if you prefer to use a roundpole instead of a M8 bolt.
Pole adaptor set with various connection possibilities for batteris with internal thread to normal pole.
Perfect for caravan and boat owners, yacht sportsman, DIY people and solar systems
Product features:
- M8 external thread
- universal use
- for + and -
- for 6 and 12V batteries
- very robust through high-quality production
- very good conductivity
- Material: Copper with silver alloy
Battery pole adaptor (+ and -) with external thread for batteries with M8 internal thread
Suitable for Westech Gel batteries 100Ah and 200Ah as well a...
Soon available again
Soon available again
VAT-exempt delivery possible*
Top seller
8-01-013755
35mm End Clamp for Solar Modules
With 4 end clamps modules can be mounted on profile rails.
Features:
material: aluminuium
opening for M8 screws
frame height of 35mm
dimensions: 70 x 30 x 39mm
With 4 end clamps modules can be mounted on profile rails.
Features:
material: aluminuium
opening for M8 screws
frame height of 35mm
dimensions...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
Top seller
8-01-001285
35mm End Clamp for Solar Modules
With 4 end clamps modules can be mounted on profile rails.
Features:
material: aluminuium
opening for M8 screws
frame height of 35mm
dimensions: 70 x 30 x 39mm
With 4 end clamps modules can be mounted on profile rails.
Features:
material: aluminuium
opening for M8 screws
frame height of 35mm
dimensions...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
Top seller
8-01-005790
3m 6mm² MC4 Connection Cable Plug/Socket Extension
3m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The equipped MC4-connectors are as well German originals made by MultiContact. The final assembly of these cables takes place in our manufactory in Lower Bavaria.
This connection cable is fabricated with professional tools to ensure an extremely high tensile strength which resists even hardest conditions and constant environmental influences.
Application:
ideal for flexible connections of solar modules on different roof sides or module rows
for parallel connection of solar modules
Advantages:
Plug and Play - unpack and install - you do not need any professional tools
irradiated solar cable (only two producers worldwide provide this technology)
planning certainty thanks to a long manufacturer's warranty of 10 years
available in different lengths and colors and therefore suitable for nearly every task
Technical data:
cable type: Lapp Ölflex XLR-R 6mm² TÜV- and UL-certified
max. voltage: 1000V
length: 3m
equipped with 1x MC4 male + 1x MC4 female
3 Meter (€4.36* / 1 Meter)
Content: 3 Meter (€4.36* / 1 Meter)
3m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The e...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
Top seller
More versions available
8-01-013601
5m connection cable micro changeover switch with Betterie bc01 socket to earthed socket (plug angled)
The 5m Plug & Play Micro Inverter Connection Cable from Offgridtec (mpn 8-01-013601) connects your Micro Inverter (e.g.Envertech) with a common grounded socket (Schuko). The cable is equipped with the Betteri bc01 socket part on the inverter side and an angled Schuko plug type f on the socket side. This cable is used for the connection between the micro inverter and your house power supply. special features of the P&P inverter connection cable Immediately ready for use since delivered as Plug & Play version technical features of the 5m Microinverter connection cable Offgridtec-Part number: 8-01-013601 Cable length: 5m Usage; Connection of compatible micro inverters to the house power grid via feed-in socket Cable type: heavy rubber cable H07RN-f 3x2,5 from Lapp-Kabel Connector on socket side: Schuko plug type-f angled Connector on inverter side: Betteri bc01 socket compatible micro inverters EVT Inverter Series from Envertech evt300s / evt560s / EVT1200S TSUN tsol M350/M800 Bosswerk mi300 / MI600 Hoymiles mi-300 / MI-600 a.o. (e.g. Huayu) Scope of delivery: 1x Offgridtec 8-01-013601 5m plug & play connection micro inverter to power outlet
5 Meter (€8.98* / 1 Meter)
Content: 5 Meter (€8.98* / 1 Meter)
The 5m Plug & Play Micro Inverter Connection Cable from Offgridtec (mpn 8-01-013601) connects your Micro Inverter (e.g.Envertech) with a common gr...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
Top seller
8-01-001385
6.0mm² Standard Car Flat Fuse Holder incl. cable
This fuse holder is fully isolated, the housing is made of rubber (fully molded). Thanks to that the fuse is additionally protected from corrosion.It is suitable for various vehicles. Electronical components can be quickly and easily protected from overvoltage. Fitting fuses are available in our shop.
Details:
suitable for flat fuses up to 16A (ATC/vehicle fuses)
dimensions housing: 40 x 17 x 45mm
total length: 25cm
splash-proof
housing and cover made of rubber
cable diameter 6mm²
Deliver scope: fuse holder without fuse
0.34 Meter (€7.32* / 1 Meter)
Content: 0.34 Meter (€7.32* / 1 Meter)
This fuse holder is fully isolated, the housing is made of rubber (fully molded). Thanks to that the fuse is additionally protected from corrosion.It ...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
Top seller
8-01-001680
Adaptor Sheet for hanger bolt M10 A2 82 x 30 x 5mm
Adaptor sheet for M10 hanger bolts
Aluminium
For M10 hanger bolts
Adaptor sheet for M10 hanger bolts
Aluminium
For M10 hanger bolts
Shipped in 1-3 days
Shipped in 1-3 days
Voltage Inverter Accessories
Photovoltaic systems are one of the most popular and effective ways to produce electricity sustainably and independently. They consist of a number of components that work together to convert solar energy into electricity. At Offgridtec, you get the highest quality technology from the best manufacturers in the industry at fair prices!
Electronics for your photovoltaic system
Although each photovoltaic system is unique depending on its type and place of use, they all consist of some basic components. To install such a system, you must first understand the different components of a photovoltaic system.
The most important components of a photovoltaic system are the generators. These solar cells convert sunlight into electrical energy. Furthermore, you need a voltage converter and a charging converter, which makes it possible to transform the generated electrical energy into a usable form.
In addition to the solar cells and the module inverter, cabling and battery storage are also important. The cabling connects the individual components with each other and makes it possible to feed the generated energy into the public grid. The battery storage stores the surplus energy and makes it available again when needed. A charge controller is also necessary because it protects the battery from overcharging or a short circuit, for example.
Everything for your solar system
All in all, the above-mentioned components of a photovoltaic system form a complex system that enables safe, efficient and cost-effective energy generation. You can obtain all the necessary components from us in outstanding quality from renowned brands!
Buy electronics for your solar system online at Offgridtec
It is important to be well informed about the components before purchasing a photovoltaic system and to ensure that they are suitable for your specific needs.
Our team of experts at Offgridtec is always on hand with experience and expertise if you have any questions about your photovoltaic system and the individual components, or if you would like advice on whether a PV system is suitable for you. Simply call us on +49 8721 91994-00 if you need help or send us a flexible e-mail: [email protected]
With us, you get high-quality products from renowned manufacturers in our industry at the best prices! What are you waiting for?
FAQ
- Which components belong to a photovoltaic system? A photovoltaic system usually consists of the following components: solar modules, inverter, charge controller, mounting system and battery.
- What are the components of a solar system? A solar system usually consists of the following components: Solar modules, inverter, charge controller, batteries, wiring and mounting material.
- How does a photovoltaic system work, explained simply? When sunlight hits the photovoltaic cells, the cells convert the light into direct current. The direct current is then passed through an inverter, which converts it into alternating current. This is then used to power appliances.
- Where can I get electronics for solar systems? In our Offgridtec online shop you will only receive the highest quality products from renowned manufacturers for your PV system! With us you will find everything you need for the optimal operation of your system. Browse through our shop today or give us a call. Our experts will be happy to answer any questions you may have.