The us3000c (mpn us3000c) is a lithium storage system of the latest generation. The accumulator was specially developed to fully meet the high demands placed on a solar accumulator today. Maximum safety and a long service life are guaranteed even with regular deep discharge thanks to the latest technology. The latest battery of the market-leading manufacturer with now 3.5 kWh per module has again a battery management system (bms) built into each module and therefore offers a lot of security. Internally, the individual cells are thus monitored and balanced against overvoltage, overtemperature, deep discharge, etc. protected. The battery is compatible and certified with many available inverters. Features Extremely cycle resistant - over 6000 cycles at 95% DoD More usable energy content than the previous model US3000 Lifetime over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging power possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function capable of reducing the current surge when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect ESS system from overvoltage function Battery management system in each module The battery management system integrated in each module protects each installed battery cell from harmful influences over the entire life of the module and effectively prevents premature failure. Protection against: Deep discharge and overcharge overvoltage during charging excessive currents during charging and discharging over and under temperature Short circuit and reverse polarity Constant monitoring of the individual cell voltages (cell balance) Modular design The system has a modular design and can be configured precisely to the desired storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) accumulator and an integrated BMS. High cycle life The extremely high cycle life of the installed LiFePo4 cells make Pylontech us3000c modules the optimal storage solution for photovoltaic systems. Regardless of whether the solar system is grid-connected or stand-alone, the Pylontech storage system offers several advantages over typical lead-acid batteries and other lithium technologies. Technical data Battery Type: Lithium Iron Phosphate (LiFePo4) Rated voltage: 48V Rated capacity: 3552 Wh Usable capacity (95% DoD): 3374 Wh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. Peak (discharge) charging current: 90A Max. (Discharge) charging current: 74A Recommended charge/discharge current: 37A Communication: rs485, CAN Weight: 32 kg Dimensions: 442 x 420 x 132 mm Protection class: IP20 Temperature range charge: 0°C - +50°C Temperature range discharge: -10°C - +50°C Temperature range storage: -20°C - +60°C Service life: over 10 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 years manufacturer warranty Certification: TÜV, ce, UN38.8 Due to the classification as dangerous goods, this product will be shipped by freight forwarding! Scope of delivery: 1x Pylontech us3000c LiFePO4 3.5 kWh 1x cable set parallel connection incl. grounding 1x rj45 data cable 1x mounting screws 1x user manual

The LiFePO4 12/12 from Offgridtec (mpn 013020) is a 12.8v 12Ah lithium iron phosphate battery of the latest generation. Its nominal energy is 128Wh and that at a weight of only 1.7kg. Depending on the depth of discharge, our LiFePO4 12/12 Basic-Pro can manage up to 5000 cycles, surpassing even the best agm and GEL batteries in terms of durability many times over.The constitution of the battery is extremely solid in physical terms. This predestines it for use in a particularly wide range of applications. The integrated bms ensures a high level of safety for the battery and the user. Recommended areas of use include: RVs, boats, stationary solar systems in residential or commercial applications.Features of the Offgridtec LiFePO4 12/12 Basic-Provery high energy density at low weightintegrated bms with numerous protection devices100% of capacity usable on demand60% lighter than agm batteriesup to 3 times as many cycles as conventional lead batteries5% self-discharge per month, easy to storewide operating temperature rangeTechnical features LiFePO4 12/12 Basic-ProOffgridtec part number: 013020Nominal energy: 128WhRated voltage: 12.8vCapacity: 12AhDimensions: 150 x 99 x 94 mmWeight: 1,7kgParallel connection: max. 10 piecesSeries connection: NoMounting position: anyNumber of cycles at 80% discharge: >2000 cyclesOperating temperature range charging: -20°C - +45°COperating temperature range discharging: -20°C - +65°CMax. continuous discharge current: 10AMax. continuous charging current: 10AEnd of charge voltage: 14.4VStorage temperature range: -20°C - +45°CDue to the classification as dangerous goods, this product will be shipped by freight forwarding!Scope of delivery:1x Offgridtec 2-01-013020, LiFePO4 12/12 Basic-Pro 12Ah 128Wh 12.8v1x instruction manual

The us5000 is a lithium storage tank of the latest generation. The storage tank was specially developed to fully meet the high demands placed on a solar storage tank today. Maximum safety and a long service life are guaranteed even with regular deep discharge thanks to the latest technology. The latest battery of the market-leading manufacturer with now 4.8 kWh per module has again a battery management system (bms) built into each module and therefore offers a lot of security. Internally, the individual cells are thus monitored and balanced against overvoltage, overtemperature, deep discharge, etc. protected. The battery is compatible and certified with many available inverters. Features Extremely cycle resistant - over 6000 cycles at 95% DoD Lifetime over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging power possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function capable of reducing the current surge when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect ESS system from overvoltage function Battery management system in each module The battery management system integrated in each module protects each installed battery cell from harmful influences over the entire life of the module and effectively prevents premature failure. Protection against: Deep discharge and overcharge overvoltage during charging excessive currents during charging and discharging over and under temperature Short circuit and reverse polarity Constant monitoring of the individual cell voltages (cell balance) Modular design The system has a modular design and can be configured precisely to the desired storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) accumulator and an integrated BMS. High cycle life The extremely high cycle life of the installed LiFePo4 cells make Pylontech us5000 modules the optimal storage solution for photovoltaic systems. Regardless of whether the solar system is grid-connected or stand-alone, the Pylontech storage system offers several advantages over typical lead-acid batteries and other lithium technologies. Technical data Battery Type: Lithium Iron Phosphate (LiFePo4) Rated voltage: 48V Rated capacity: 4800 Wh Usable capacity (95% DoD): 4560 Wh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. Peak (discharge) charging current: 200a (15sec) Max. (Discharge) charging current: 120a (15min) Recommended charge/discharge current: 75A Communication: rs485, CAN Weight: 38 kg Dimensions: 442 x 420 x 161 mm Protection class: IP20 Temperature range charge: 0°C - +55°C Temperature range discharge: -10°C - +55°C Temperature range storage: -20°C - +60°C Service life: over 15 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 years manufacturer warranty Certification: TÜV, ce, UN38.8 Due to the classification as dangerous goods, this product will be shipped by freight forwarding! Scope of delivery: 1x Pylontech us5000 LiFePO4 4.8 kWh 1x cable set parallel connection incl. grounding 1x rj45 data cable 1x mounting screws 1x instruction manual

The Pylontech us2000c (mpn us2000nb02v00201) is a lithium storage tank of the latest generation. The accumulator has been specially developed to fully meet the high demands placed on a solar accumulator today. Maximum safety and a long service life are guaranteed even with regular deep discharge thanks to the latest technology. The latest battery of the market-leading manufacturer with now 2.4kWh per module has again a battery management system (bms) built into each module and therefore offers a lot of security. Internally, the individual cells are thus monitored and balanced against overvoltage, overtemperature, deep discharge, etc. protected. The battery is compatible and certified with many available inverters. Features Extremely cycle resistant - over 6000 cycles at 95% DoD More usable energy content than the predecessor model US2000 Lifetime over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging power possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function capable of reducing the current surge when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect ESS system from overvoltage function Battery management system in each module The battery management system integrated in each module protects each installed battery cell from harmful influences over the entire life of the module and effectively prevents premature failure. Protection against: Deep discharge and overcharge overvoltage during charging excessive currents during charging and discharging over and under temperature Short circuit and reverse polarity Constant monitoring of the individual cell voltages (cell balance) Modular design The system has a modular design and can be configured precisely to the desired storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) accumulator and an integrated BMS. High cycle life The extremely high cycle life of the installed LiFePo4 cells make Pylontech us2000c modules the optimal storage solution for photovoltaic systems. Regardless of whether the solar system is grid-connected or stand-alone, the Pylontech storage offers several advantages over typical lead-acid batteries and other lithium technologies. Technical data Battery Type: Lithium Iron Phosphate (LiFePo4) Rated voltage: 48V Rated capacity: 50 Ah / 2.4 kWh Usable capacity (95% DoD): 47.5 Ah / 2.28 kWh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. (D)Charge current: 90A Communication: rs485, CAN Weight: 24 kg Dimensions: 442 x 410 x 89 mm Protection class: IP20 Operating temperature range: 0°C - +50°C Storage temperature range: -20°C - +60°C Service life: over 10 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 years manufacturer warranty Certification: iec62619, ce, UN38.3 Due to classification as dangerous goods, this product will be shipped by freight forwarding! Scope of delivery 1x Pylontech us2000c LiFePO4 2.4 kWh 1x cable set parallel connection incl. grounding 1x rj45 data cable 1x mounting screws 1x instruction manual

Die Growatt ARK 2,5H-A1 Hochvolt Batterie (MPN ARK-2.5H-A1) ist ein LiFePO4-Speicher mit hoher Zyklenfestigkeit und langer Lebensdauer. Das modulare, stapelbare Konzept ermöglicht eine flexible Anwendung für verschiedene Szenarien und ist leicht zu installieren. Die Batterie bietet hervorragende Leistungen bei hoher Belastung und ist mit seinem IP65-Schutz auch für die Installation im Freien geeignet. Um Überspannungen im System zu vermeiden, kommt der Softstart zum Einsatz. Über die ARK 2,5H-A1-Batterie: Modulares, stapelbares Batteriekonzept Kobaltfreies Lithium-Eisenphosphat (LFP) Hohe Zyklenfestigkeit und lange Lebensdauer Wand- oder Bodeninstallation möglich Softstart zum Schutz des Systems vor Überspannungen Automatisches Aufwachen bei Unterspannung Schutzart IP65 für die Installation im Freien Ferndiagnose und Firmware-Update Das ARK-Batteriesystem Durch das modulare Konzept ist das ARK-System flexibel einsetzbar und bei Bedarf erweiterbar. Ein Batterieturm kann mit mindestens 2 und bis zu 10 Speichermodule errichtet werden, es können auch mehrere Türme in einem System installiert werden. Zum Betrieb wird pro Turm ein BMS-Steuerungselement, sowie ein Verbindungskabelset zum entsprechenden Wechselrichter benötigt. Zur Bodeninstallation ist zusätzlich eine Batterie-Basis pro Turm nötig. Die ARK-Hochvolt-Speicher sind mit den MIN- und MOD-XH, sowie den dreiphasigen SPH- und SPA-Wechselrichtern kompatibel. Je nach Inverter-Serie wird eine andere Steuerungseinheit, sowie Verbindungskabelset benötigt. Einsatzgebiete Für netzgebundene, sowie autarke Photovoltaikanlagen Notstromversorgung Unterbrechungsfreie Stromversorgungen (USV / UPS) Flexibel Erweitern Das ARK Batteriesystem von Growatt bietet eine hohe Flexibilität durch seine erweiterbaren Konfigurationsmöglichkeiten, die von 2,56 kWh bis zu 25,6 kWh reichen. Die Installation und Erweiterung des Systems gestaltet sich einfach und unkompliziert durch das modulare Design und die Verwendung von Kabeln. Eine weitere Innovation des ARK Systems ist, dass im Gegensatz zu anderen Batteriesystemen kein Batterieschrank benötigt wird. Lediglich eine Batteriebasis ist für einen stabilen Stand erforderlich. Softstart zum Schutz des Systems Der Softstart-Mechanismus ist eine Schutzfunktion, die bei der Growatt-Batterie zum Einsatz kommt, um das System vor Überspannungen zu schützen. Beim Starten oder Einschalten der Batterie wird die Stromversorgung allmählich erhöht, um das System vor Schäden zu bewahren, die durch eine plötzliche Spannungsspitze verursacht werden könnten. Auf diese Weise wird ein reibungsloser und sicherer Betrieb des Batteriesystems gewährleistet. Hohe Zyklen-Lebensdauer Die Growatt ARK Batteriemodule sind aufgrund ihrer extrem hohen Zyklen-Lebensdauer und der Verwendung von LiFePo4-Zellen eine ideale Speicherlösung für Photovoltaikanlagen. Unabhängig davon, ob es sich um ein netzgeführtes oder ein Inselsystem handelt, bietet der Growatt Speicher im Vergleich zu herkömmlichen Bleibatterien und anderen Lithium-Technologien zahlreiche Vorteile. Technische Daten: Batterie-Typ: Kobaltfreies Lithium-Eisenphosphat (LiFePo4) Energiekapazität: 2,56 kWh Nutzbare Kapazität: 2,3 kWh Nennspannung: 51,2 V Betriebsspannungsbereich: 47,2-56,8 V Lade-/Entladestrom: 25 A/0,5 C Schutzart: IP65 Temperaturbereich: -10~50° C Abmessung: 650 x 260 x 180 mm Gewicht: ca. 28 kg 10 Jahre Herstellergarantie Zertifikate: IEC62619, CE, CEC, RCM, UN38.3 Lieferumfang: 1x Growatt ARK 2,5H-A1 2,56 kWh Hochvoltbatterie 1x Batterieverbindungsset

With the Bluetti b230 battery from EcoFlow, you can expand the capacity of your Bluetti ac200 Max Powerstation by 2.05kWh. In total, you can add two Extra Smart batteries to the Powerstations, doubling or even tripling your capacity. Features of the Bluetti b230 battery Expansion battery to your Bluetti ac200 Max powerstation Enormous capacity of 2.05kWh Perfect for expanding your back-up solution in case of emergency Charging Methods: AC outlet, 12V car adapter, solar panel Charging only possible in combination with the power station With LCD display to show remaining charge, remaining time, off and on Modular extension of your powerstation Double or triple the capacity of your Bluetti Powerstation and extend the runtime of your most important devices. Ideally suited for home use, backup during power outages, or for camping and outdoor adventures. In addition to the ac200 Max, the b230 battery can also be connected to a Bluetti ac200P, eb200 or the ep500 Pro Powerstation. In this way, the battery capacity of the powerstation can be increased by up to 2048Wh. With a t500 adapter (not included in the package) it is possible to charge the Bluetti Powerstation with the Bluetti ac200P, eb200 or ep500 Pro. Technical data: Dimensions: 420 x 280 x 227.5 mm Weight: approx. 21.6 kg 24 months manufacturer warranty Capacity: 2048Wh Cell chemistry: LiFePO4 Lifetime: 3500+ cycles to 80% capacity/ 6000+ cycles to 50% capacity Scope of delivery: Bluetti ac200MAX b230 Expansion Battery Module Battery expansion cable (P090A) 1x user manual

The Pylontech us2000c (mpn us2000nb02v00201) is a lithium storage tank of the latest generation. The accumulator has been specially developed to fully meet the high demands placed on a solar accumulator today. Maximum safety and a long service life are guaranteed even with regular deep discharge thanks to the latest technology. The latest battery of the market-leading manufacturer with now 2.4kWh per module has again a battery management system (bms) built into each module and therefore offers a lot of security. Internally, the individual cells are thus monitored and balanced against overvoltage, overtemperature, deep discharge, etc. protected. The battery is compatible and certified with many available inverters. Features Extremely cycle resistant - over 6000 cycles at 95% DoD More usable energy content than the predecessor model US2000 Lifetime over 10 years Absolutely intrinsically safe lithium technology Compatible with many available inverters Automatic address setting when connected in multi-groups High charging and discharging power possible Integrated BMS Very high storage density - low weight and compact design Easy installation thanks to modular design Absolutely maintenance-free and durable Built-in soft-start function capable of reducing the current surge when the inverter is started from the battery Dual active protection at BMS level Supports WakeUp by 5-12V signal from rj45 port Pre-charge function to protect ESS system from overvoltage function Battery management system in each module The battery management system integrated in each module protects each installed battery cell from harmful influences over the entire life of the module and effectively prevents premature failure. Protection against: Deep discharge and overcharge overvoltage during charging excessive currents during charging and discharging over and under temperature Short circuit and reverse polarity Constant monitoring of the individual cell voltages (cell balance) Modular design The system has a modular design and can be configured precisely to the desired storage capacity by interconnecting several modules. Each storage module consists of a high-performance lithium iron phosphate (LiFePo4) accumulator and an integrated BMS. High cycle life The extremely high cycle life of the installed LiFePo4 cells make Pylontech us2000c modules the optimal storage solution for photovoltaic systems. Regardless of whether the solar system is grid-connected or stand-alone, the Pylontech storage offers several advantages over typical lead-acid batteries and other lithium technologies. Technical data Battery Type: Lithium Iron Phosphate (LiFePo4) Rated voltage: 48V Rated capacity: 50 Ah / 2.4 kWh Usable capacity (95% DoD): 47.5 Ah / 2.28 kWh Discharge voltage range: 44.5 - 53.5V Charging voltage range: 52.5 - 53.5V Max. (D)Charge current: 90A Communication: rs485, CAN Weight: 24 kg Dimensions: 442 x 410 x 89 mm Protection class: IP20 Operating temperature range: 0°C - +50°C Storage temperature range: -20°C - +60°C Service life: over 10 years Cycle life: over 6000 at 95% DoD BMS / monitoring: integrated in each module Warranty: 10 years manufacturer warranty Certification: iec62619, ce, UN38.3 Due to classification as dangerous goods, this product will be shipped by freight forwarding! Scope of delivery 1x Pylontech us2000c LiFePO4 2.4 kWh 1x cable set parallel connection incl. grounding 1x rj45 data cable 1x mounting screws 1x instruction manual

LiFePO4 12/30 Smart Pro from Offgridtec (mpn 2-01-013015) is a latest generation intelligent 12.8v 30Ah lithium iron phosphate battery with Bluetooth communication function. Its rated energy is 384 Wh and it weighs only 4 Kg. Depending on the discharge battery, our LiFePO4 12/30 Smart Pro can manage up to 5000 cycles, surpassing even the best agm and GEL batteries in terms of durability many times over. Together with the free Offgridtec Akkuviewer Smart App for iOS and Android devices the function monitoring of the lithium battery allowed. The constitution of the battery is extremely solid in physical terms. This predestines it for use in a particularly wide range of applications. The integrated bms protection ensures a high level of safety for the battery and the user. Recommended areas of use include: Motor homes, boats, stationary solar systems in the private or commercial sector. Features of Offgridtec LiFePO4 12/30 Smart-Pro very high energy density at low weight integrated Bluetooth for connection with the free Offgridtec Akkuviewer Smart App integrated bms with numerous protections 100% of capacity usable when needed 60% lighter than agm batteries up to 3 times as many cycles as conventional lead-acid batteries 5% self-discharge, easy to store wide operating temperature range Technical features LiFePO4 12/30 Smart-Pro Offgridtec Part number: 2-01-013015 Nominal energy: 384 Wh Rated voltage: 12.8 V Capacity: 30 Ah Dimensions: 180 x 77 x 170 mm Weight: 4 kg Parallel connection: max. 10 pieces Series connection: No Mounting position: any Number of cycles at 80% discharge: >2000 cycles Operating temperature range charging: -20°C - +45°C Operating temperature range discharging: -20°C - +65°C Max. continuous discharge current: 30A Max. continuous charging current: 30A End of charge voltage: 14.4V Storage temperature: -20°C - +45°C Smart: Retrieve battery status via Akkuviewer Smart App Thanks to the integrated Bluetooth module, you can call up important parameters of the battery on your smartphone or a tablet at any time. The required "Offgridtec Akkuviewer Smart" app from Offgridtec is available free of charge in the Apple app store or for Android devices in the Google play store. The following data can be displayed via Akkuviewer Smart: Current state of charge as a percentage display - SOC Current power consumption Current battery voltage Number of cycles so far Remaining runtime and some more... Due to the classification as dangerous goods, this product will be shipped by freight forwarding! Scope of delivery: 1x Offgridtec 2-01-013015, LiFePO4 12/30 Smart Pro 30Ah 384Wh 12.8v 1x instruction manual

The LiFePO4 12/100 Smart Pro from Offgridtec (mpn 2-01-010870) is an intelligent, 12.8 v 100 Ah lithium iron phosphate battery of the latest generation with Bluetooth communication function. Its rated energy is 1280 Wh and it weighs only 13 Kg. Depending on the discharge battery, our LiFePO4 12/100 Smart Pro can manage up to 5000 cycles, surpassing even the best agm and GEL batteries in terms of durability many times over. Together with the free Offgridtec Akkuviewer Smart App for iOS and Android devices the function monitoring of the lithium battery allows. The constitution of the battery is extremely solid in physical terms. This predestines it for use in a particularly wide range of applications. The integrated bms protection ensures a high level of safety for the battery and the user. Recommended areas of use include: Motor homes, boats, stationary solar systems in the private or commercial sector. Features of the Offgridtec LiFePO4 12/100 Smart Pro 100Ah very high energy density at low weight integrated Bluetooth for connection with the free Offgridtec Akkuviewer Smart App integrated bms for with numerous protections 100% of capacity usable when needed 60% lighter than agm batteries up to 3 times as many cycles as conventional lead-acid batteries less than 3% self-discharge, easy to store easy-to-maintain battery design as cell modules are screwed together and not encapsulated wide operating temperature range technical features LiFePO4 12/100 Smart Pro Offgridtec Part number: 2-01-010870 Nominal energy: 1280 Wh Rated voltage: 12.8 v Capacity: 100 Dimensions: 328 x 173 x 220 mm Weight: 13,0 Kg Parallel connection: unlimited Series connection: max. four Mounting position: any Number of cycles at 80% discharge: >2000 cycles Operating temperature range charging: -5°C - 45°C Operating temperature range discharging: -20°C - 60°C Maximum continuous discharge current: 100A Maximum continuous charging current: 100A End of charge voltage: 14.6v Storage temperature: -10°C - 35°C Smart: Retrieve battery status via battery viewer smart app Thanks to the integrated Bluetooth module, you can call up important parameters of the battery on your smartphone or a tablet at any time. The required "Offgridtec Akkuviewer Smart" app from Offgridtec is available free of charge in the Apple app store or for Android devices in the Google play store. The following data can be displayed via Akkuviewer Smart: Current state of charge as a percentage display - SOC Current power consumption Current battery voltage Number of cycles so far Remaining runtime and some more... Due to classification as dangerous goods, this product will be shipped by carrier! Scope of delivery: 1x Offgridtec 2-01-010870, LiFePO4 12/100 Smart-Pro 100Ah 1280Wh 12.8v 1x instruction manual

With the b300 expansion battery from Bluetti you can expand the capacity of your Bluetti Powerstation by 3.1kWh. In total, you can add two extra smart batteries to the powerstations, doubling or even tripling your capacity. Actually, the b300 battery is designed as an extension for the ac300, ac200Max, ac200P, eb240, eb150, but it can also be used separately as long as you don't need 220 volts. Features of the Bluetti b300 battery Extension battery to your Bluetti powerstation Enormous capacity of 3.1kWh Perfect for expanding your back-up solution in case of emergency Charging Methods: AC outlet, 12V car adapter, solar panel Charging only possible in combination with the power station With LCD display to show remaining charge, remaining time, off and on Modular extension of your powerstation Double or triple the capacity of your Bluetti Powerstation and extend the runtime of your most important devices. Ideally suited for home use, backup during power outages, or for camping and outdoor adventures. In addition to the ac300, the b300 battery can also be connected to a Bluetti ac200 Max, eb240 or the eb150 powerstation. In this way, the battery capacity of the powerstation can be increased by up to 3072Wh. Technical data: Dimensions: 520 x 320 x 266 mm Weight: approx. 36.1kg 24 months manufacturer warranty Capacity: 3072 Wh Cell chemistry: LiFePO4 Lifetime: 3500+ cycles to 80% capacity/ 6000+ cycles to 50% capacity Scope of delivery: Bluetti b300 Expansion Battery Module Battery expansion cable (P090A) Solar charging cable 1x instruction manual

Bei dem Force-L2 3,55kWh Batteriemodul von Pylontech (MPN FL4874M) handelt es sich um einen 48V Niedervolt-Akku der neuesten Generation, welcher erneut die bewährte Lithium-Eisenphosphat Speichertechnologie besitzt. Die LiFePO4 Akkumulatoren zeichnen sich, auch bei hoher Leistung, durch eine lange Lebensdauer und einer hohen Sicherheit aus. Die gute Zyklenfestigkeit und hohe Belastbarkeit machen den Batteriespeicher zu einem idealen Partner für eine leistungsstarke Photovoltaikanlage, welche täglich mehrfach den Speicher laden kann. Eine Kompatibilitätsliste für passende Wechselrichter zu Pylontech-Akkus mit über 30 Marken und Unternehmen, darunter beispielsweise Victron Energy, Growatt, Solis uvm., finden Sie als Download in unseren Anhängen! (Pylontech Compatibility List) Eigenschaften der Force-L2 Serie LiFePO4 Speichertechnologie Dualer aktiver Schutz auf BMS-Ebene Hohe Lade- und Entladeleistung möglich Zyklenlebensdauer: über 6000 bei 90% DoD Vorladefunktion zum Schutz des ESS-Systems vor Überspannungsfunktion Zuverlässige Leistung dank langlebiger Komponenten Flexibel erweiterbar Kompakt und platzsparend Lebensdauer über 15 Jahre Mit vielen verfügbaren Wechselrichtern kompatibel Einfache Installation dank modularem Design Flexibel Erweitern Neben der bemerkenswerten anpassbaren Spannung von 44,5V - 53,5V, tritt auch die flexible Konfiguration der Kapazität zum Vorschein. Diese ist von 7,1 kWh bis 14,2 kWh erweiterbar. Das modulare Design ist einfach gestaltet und erlaubt somit eine einfach Installation mit unkomplizierter Verbindungen der Kabel. Ein weiterer Fortschritt des neuen Speichersystems besteht darin, dass im Gegensatz zu anderen Systemen, kein Batterieschrank mehr benötigt wird. Durch den vielseitigen und platzsparenden Einsatz eignet sich die Force L2-Serie für verschiedenste Anwendungsszenarien. Hohe Zyklen-Lebensdauer Die extrem hohe Zyklen-Lebensdauer der verbauten LiFePo4 Zellen machen Pylontech Force L2 Module zur optimalen Speicherlösung für Photovoltaikanlagen. Unabhängig ob es sich bei dem Solarsystem um eine netzgeführte- oder eine Inselanlage handelt, bietet der Pylontech Speicher einige Vorteile gegenüber typischen Bleibatterien und anderen Lithium Technologien. Eigenverbrauch optimal abdecken In Wohngebäuden ist der Energiebedarf morgens und abends höher, während die erzeugte Solarenergie erst am Mittag den Höchstwert erreicht. Die Batteriespeichersysteme der Force Serie von Pylontech gleichen diese Differenz zwischen Verbrauch und Erzeugung elektrischer Energie aus. Selbst ein kleiner Batteriespeicher mit einer Kapazität von bis zu 15 kWh kann den Eigenverbrauch in einem Mehrpersonenhaushalt spürbar optimieren und den ständig steigenden Stromkosten entgegenwirken. Größere Speicher ermöglichen durch gezielte Reduzierung der Entladetiefe eine längere Lebensdauer oder erhöhen die Reserven bei einem bewölkten Tag oder Stromausfall. Technische Daten Batterie-Typ: Lithium-Eisenphosphat (LiFePo4) Nennspannung: 48V Speicherkapazität: 3550 Wh Entladespannungsbereich: 44,5 – 53,5V Kommunikation: RS485, CAN Gewicht: 35,5 kg Abmessungen: 450 x 300 x 300 mm Schutzart: IP55 Temperaturbereich Ladung: 0°C - +50°C Temperaturbereich Entladung: -10°C - +50°C Temperaturbereich Lagerung: -20°C - +60°C Garantie: 15 Jahre Herstellergarantie Zertifizierung: VDE2510-50,IEC62619,IEC62040 CE, UN38.8 Aufgrund der Klassifizierung als Gefahrgut wird dieses Produkt per Spedition verschickt! Lieferumfang: 1x Pylontech Force-L2 3,55 kWh 48V Speicher 1x Kabelsatz Parallelschaltung inkl. Erdung 1x RJ45 Datenkabel 1x Montageschrauben 1x Bedienungsanleitung

The LiFePO4 12/150 Smart Pro from Offgridtec (mpn 2-01-012655) is an intelligent, latest generation 12.8 v 150 Ah lithium iron phosphate battery with Bluetooth communication function. Its rated energy is 1920 Wh and it weighs only 18 Kg. Depending on the discharge battery, our LiFePO4 12/150 Smart Pro can manage up to 5000 cycles, surpassing even the best agm and GEL batteries in terms of durability many times over. Together with the free Offgridtec Akkuviewer Smart App for iOS and Android devices the function monitoring of the lithium battery allows. The constitution of the battery is extremely solid in physical terms. This predestines it for use in a particularly wide range of applications. The integrated bms protection ensures a high level of safety for the battery and the user. Recommended areas of use include: Motor homes, boats, stationary solar systems in the private or commercial sector. Features of the Offgridtec LiFePO4 12/150 Smart Pro 150Ah very high energy density at low weight integrated Bluetooth for connection with the 'free Offgridtec Akkuviewer Smart App integrated bms for with numerous protections 100% of capacity usable when needed 60% lighter than agm batteries up to 3 times as many cycles as conventional lead-acid batteries less than 3% self-discharge, easy to store wide operating temperature range technical features LiFePO4 12/150 Smart Pro Offgridtec Part number: 2-01-012655 Nominal energy: 1920Wh Rated voltage: 12.8 v Capacity: 150Ah Dimensions: 483 x 170 x 240 mm Weight: 18.0 Kg Parallel connection: unlimited Series connection: max. four Smart-Pro 12/150 can be connected in series Mounting position: any Number of cycles at 80% discharge: >2000 cycles Operating temperature range charging: -5°C - 45°C Operating temperature range discharging: -20°C - 60°C Maximum continuous discharge current: 150A Maximum continuous charging current: 150A End of charge voltage: 14.6v Storage temperature: -10°C - 35°C Smart: Retrieve battery status via battery viewer smart app Thanks to the integrated Bluetooth module, you can call up important parameters of the battery on your smartphone or a tablet at any time. The required "Offgridtec Akkuviewer Smart" app from Offgridtec is available free of charge in the Apple app store or for Android devices in the Google play store. The following data can be displayed via Akkuviewer Smart: Current state of charge as a percentage display - SOC Current power consumption Current battery voltage Remaining runtime Number of cycles to date and some more... Due to classification as dangerous goods, this product will be shipped by carrier! Scope of delivery: 1x Offgridtec 2-01-012655, LiFePO4 12/150 Smart-Pro 150Ah 1920Wh 12.8v 1x instruction manual

Bei dem Force-H2 3,55kWh Batteriemodul von Pylontech (MPN FH9637M) handelt es sich um einen 96V Hochvolt-Akku der neuesten Generation, welcher zum erneuten Male die bewährte Lithium-Eisenphosphat Speichertechnologie besitzt. Diese Akkumulatoren zeichnen sich vor allem, auch bei hoher Leistung, durch eine lange Lebensdauer und einer hohen Sicherheit aus. Durch eine sehr gute Zyklenfestigkeit und hohe Belastungsgrenze, sind die Batteriespeicher ein idealer Partner für eine Leistungsstarke Photovoltaikanlage, welche täglich den Speicher mehrfach laden kann. Eine Kompatibilitätsliste für passende Wechselrichter zu Pylontech-Akkus mit über 30 Marken und Unternehmen, darunter beispielsweise Victron Energy, Growatt, Solis uvm., finden Sie als Download in unseren Anhängen! (Pylontech Compatibility List) Eigenschaften der Force-H2 Serie LiFePO4 Speichertechnologie Dualer aktiver Schutz auf BMS-Ebene Hohe Lade- und Entladeleistung möglich Zyklenlebensdauer: über 5000 bei 95% DoD Vorladefunktion zum Schutz des ESS-Systems vor Überspannungsfunktion Zuverlässige Leistung dank langlebiger Komponenten Flexibel erweiterbar Kompakt und platzsparend Lebensdauer über 15 Jahre Mit vielen verfügbaren Wechselrichtern kompatibel Einfache Installation dank modularem Design Flexibel Erweitern Bei der Force-H2 - Serie tritt die flexible Konfiguration der Kapazität zum Vorschein. Diese ist von 7,1 kWh bis 14,2 kWh erweiterbar. Das modulare Design ist einfach gestaltet und erlaubt somit eine einfach Installation mit unkomplizierter Verbindungen der Kabel. Ein weiterer Fortschritt des neuen Speichersystems besteht darin, dass im Gegensatz zu anderen Systemen, kein Batterieschrank mehr benötigt wird. Durch den vielseitigen und platzsparenden Einsatz eignet sich die Force H2-Serie für verschiedenste Anwendungsszenarien. Hohe Zyklen-Lebensdauer Die extrem hohe Zyklen-Lebensdauer der verbauten LiFePo4 Zellen machen Pylontech Force-H2 Module zur optimalen Speicherlösung für Photovoltaikanlagen. Unabhängig ob es sich bei dem Solarsystem um eine netzgeführte- oder eine Inselanlage handelt, bietet der Pylontech Speicher einige Vorteile gegenüber typischen Bleibatterien und anderen Lithium Technologien. Eigenverbrauch optimal abdecken In Wohngebäuden ist der Energiebedarf morgens und abends höher, während die erzeugte Solarenergie erst am Mittag den Höchstwert erreicht. Die Batteriespeichersysteme der Force Serie von Pylontech gleichen diese Differenz zwischen Verbrauch und Erzeugung elektrischer Energie aus. Selbst ein kleiner Batteriespeicher mit einer Kapazität von bis zu 15 kWh kann den Eigenverbrauch in einem Mehrpersonenhaushalt spürbar optimieren und den ständig steigenden Stromkosten entgegenwirken. Größere Speicher ermöglichen durch gezielte Reduzierung der Entladetiefe eine längere Lebensdauer oder erhöhen die Reserven bei einem bewölkten Tag oder Stromausfall. Technische Daten Batterie-Typ: Lithium-Eisenphosphat (LiFePo4) Nennspannung: 96V DC Speicherkapazität: 3552 Wh Kommunikation: CAN, Modbus Gewicht: 35 kg Abmessungen: 450 x 296 x 296 mm Schutzart: IP55 Betriebstemperaturbereich: 0 - +50°C Temperaturbereich Lagerung: -20°C - +60°C Garantie: 15 Jahre Herstellergarantie Zertifizierung: VDE2510-50,IEC62619, IEC62477-1, IEC62040-1, CEC, CE, UN38.8 Aufgrund der Klassifizierung als Gefahrgut wird dieses Produkt per Spedition verschickt! Lieferumfang: 1x Pylontech Force-H2 3,55 kWh 96V Speicher 1x 3,5m DC-Kabelsatz 1x RJ45 Datenkabel 1x Montageschrauben 1x Bedienungsanleitung

The LiFePO4 12/200 Smart Pro from Offgridtec (mpn 2-01-010875) is an intelligent, latest generation 12.8 v 200 Ah lithium iron phosphate battery with Bluetooth communication function. Its rated energy is 2560 Wh and it weighs only 26 Kg. Depending on the discharge battery, our LiFePO4 12/200 Smart Pro can manage up to 5000 cycles, surpassing even the best agm and GEL batteries in terms of durability many times over. Together with the free Offgridtec Akkuviewer Smart App for iOS and Android devices the function monitoring of the lithium battery allows. The constitution of the battery is extremely solid in physical terms. This predestines it for use in a particularly wide range of applications. The integrated bms protection ensures a high level of safety for the battery and the user. Recommended areas of use include: Motor homes, boats, stationary solar systems in the private or commercial sector. Features of the LiFePO4 12/200 Smart-Pro very high energy density at low weight integrated Bluetooth for connection with the freeOffgridtec Akkuviewer Smart App integrated bms for with numerous protections 100% of capacity usable when needed 60% lighter than agm batteries up to 3 times as many cycles as conventional lead-acid batteries less than 3% self-discharge, easy to store wide operating temperature range technical features LiFePO4 12/200 Smart Pro Offgridtec Part number: 2-01-010875 Nominal energy: 2560 Wh Rated voltage: 12.8 v Capacity: 200 Ah Dimensions: 520 x 267 x 228 mm Weight: 26 Kg Parallel connection: max. four Smart-Pro 12/200 can be connected in parallel Series connection: max. four Smart-Pro 12/200 can be connected in series Mounting position: any Number of cycles at 80% discharge: >2000 cycles Operating temperature range charging: 0°C - 45°C Operating temperature range discharging: -20°C - 60°C Maximum continuous discharge current: 100A Maximum continuous charging current: 100A End of charge voltage: 14.6v Storage temperature: -10°C - 35°C Smart: Retrieve battery status via battery viewer smart app Thanks to the integrated Bluetooth module, you can call up important parameters of the battery on your smartphone or a tablet at any time. The required "Offgridtec Akkuviewer Smart" app from Offgridtec is available free of charge in the Apple app store or for Android devices in the Google play store. The following data can be displayed via Akkuviewer Smart: Current state of charge as a percentage display - SOC Current power consumption Current battery voltage Number of cycles so far Remaining runtime and some more... Due to classification as dangerous goods, this product will be shipped by carrier! Scope of delivery: 1x Offgridtec 2-01-010875, LiFePO4 12/200 Smart-Pro 200 Ah 2560Wh 12.8v 1x instruction manual

With the delta Pro (mpn 50034008), EcoFlow presents the largest version of its premium delta series in the mobile power station range to date. With its numerous connection and charging options, this portable power station is a versatile all-rounder for use at home, as a backup in case of power failure or for camping and outdoor adventures. With its 3600wh capacity and 3600w inverter, the delta Pro can power almost any device, such as kitchen appliances, lights, cell phones and laptops or tools. With the delta Pro Smart add-on batteries, the capacity can even be expanded by up to 7.2kWh (sold separately). Features of the EcoFlow delta Pro Battery powered generator with 45kg Enormous capacity of 3.6kWh Perfect as a back-up solution in case of emergency Automatic change of supply mode within 30ms in case of power failure For up to 14 consumers Use all connections at the same time Simultaneous charging and discharging possible Charging methods: AC outlet, 12V car adapter, solar panel Suitable for solar panels up to 1600w Control and monitor the power station with the EcoFlow app Fully charge in under 2 hours via standard wall outlet Modular expandable storage capacity Mobile energy supply made easy With three different charging options, the Ecoflow delta Pro Powerstation offers a high degree of flexibility and is quickly ready for use in different situations. The four AC sockets provide 3600w total rated power (peak power 7200w). The powerstation has numerous protection features such as over-voltage and short-circuit protection. The LCD display, located directly on the power station, can be used to display the charge level, remaining battery percentage, input and output power, and other data. This data can likewise be displayed and controlled via the associated EcoFlow app. With X-Boost technology, the delta Pro can power a device with a maximum of 4500w while keeping the rated output power at 3600w. This avoids operational failures due to overload protection. This mode is well suited for heaters, among others, but it should be tested with the intended device before use. Emergency power supply The Ecoflow delta Pro is ideal for your emergency power supply. When you connect the power station to the mains via the AC input, all devices on the AC outputs are supplied with mains power. In the event of a sudden power failure, the delta will automatically switch to battery-powered supply mode within 30ms. As a basic UPS function, this feature does not support 0ms switching. Therefore, do not connect devices that require uninterruptible power supply, such as data servers or workstations. Test and confirm compatibility before using the product. Inputs and outputs: AC charging input: max 2900w, 230v - 12.5A Car charging input: support 12v/24v battery, standard 8A Solar charging input: 11-150v, max 15a, max 1600w AC output (4x): total 3600w (peak 7200w), 230v/16A Max. Device power supported by X-Boost: 4500w USB-A output (2x): 5v - 2.4a, max. 12w per port USB-A fast charging (2x): 5v/2.4a, 9v/2a, 12v/1.5a, max. 18w per port USB-C output (2x): 5/9/12/15/20v - 5a, max. 100w per port dc5521 output (2x): 12.6v - 3a, 38w per port Car charger output (1x): 126w - 12.6v/DC - max 10A Anderson port (1x): 30a, 12.6v Supports wifi and bluetooth Supports up to 2 delta Pro Smart Extra batteries and smart generator (sold separately) Specifications: Dimensions: 635 x 284 x 420 mm Weight: approx. 45 kg Warranty: 24 months manufacturer warranty Capacity: 3600wh Cell chemistry: LFP Lifetime: 3,500 cycles to 80% capacity - 6,500 cycles to 50% capacity Charging temperature: 0°C - +45°C Discharge temperature: -20°C - +45°C Scope of delivery: 1x EcoFlow Delta Pro 1x AC charging cable 1x car charging cable 1x dc5521 to dc5525 cable 1x handle cover 1x user manual

The lfp-bms 12.8v 330Ah (mpn bat512132410) from Victron Energy is a LiFePO4 battery of the latest generation. When fully charged, lfp 12.8/330 stores a whopping 4220Wh of power with a very low self-discharge rate and superior cycle life. The lfp battery family from Victron already features integrated cell balancing and a bms (battery management system) interface. Important technical data of the lfp bms 12.8v 330Ah: Rated voltage: 12.8v Victron Part number: BAT512132410 Rated energy at 25°C*: 4220Wh Rated capacity at 25°C/0°C/-25°C: 330Ah / 260Ah / 160Ah Number of cycles at 80%/70%/50% depth of discharge: 2500 / 3000 / 5000 cycles recommended continuous discharge current: ≤300A maximum continuous discharge current: 400A Weight: 30kg Connection terminal: M10 For more technical data, please refer to the official data sheet and below in the "technical data" section. Efficient and economical: the lfp-bms 12.8v 330Ah Although Victrons lfp-batteries are expensive compared to AGM batteries or GEL batteries, the higher purchase cost will more than pay off in most cases. With a service life of up to 5000 cycles, they exceed the maximum service life of even the best lead-acid batteries many times over. In addition, the lfp 12.8/330 scores 70% in terms of space and weight savings. The energy efficiency of 92% is also significantly higher than the 80% of lead-acid batteries, which can be essential for off-grid systems, especially for off-grid solar and/or wind power plants. Multi-talented: infinitely flexible with lithium technology from Victron Energy lfp lithium batteries from Victron can be integrated into almost all common applications. In the mobile sector, this technology has played an important role for quite some time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and that irregular charging cannot harm them, they are also making their way into land applications and can now be found in almost all system classes. Parallel and series connection up to max. 1650Ah at 48v Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 5 batteries of this type in parallel and up to 4 blocks of 5 in series, which results in a maximum of 1650Ah at 48v - this corresponds to a maximum storable nominal energy of about 79,000 Wh. A total of 7 models available The lfp-bms family consists of a total of 7 models. In addition to the lfp 12.8/330, there are the following other power classes: 12.8v - 50Ah - 640Wh 12.8v - 100Ah - 1280Wh 12.8v - 160Ah - 2048Wh 12.8v - 200Ah - 2560Wh 25.6v - 100Ah - 2560Wh 25.6V - 200-a Ah - 5120Wh IMPORTANT NOTICE: The use of an additional bms is mandatory to interrupt or shut down the load when the voltage of a battery cell drops below 2.8v or to stop charging when the voltage of a battery cell rises above 3.75v and to shut down the system when the temperature of the cell exceeds 60°C. For this purpose you have the choice between the bms 12/200 and the VE.Bus bms - For further details of the devices, please refer to the respective article descriptions. Due to the classification as dangerous goods, this product is shipped by freight forwarding! Scope of delivery: 1x LiFePO4 battery lfp-CB 12.8/330, Victron Energy BAT512132410 1x instruction manual more resources about lithium batteries: Victron LiFePO4 Batterien - All product families from the LiFePO4 battery category of VE Category Lithium Batteries - Total program with all available batteries from this range

The lfp-bms 12.8v 160Ah (mpn bat512116610) from Victron Energy is a LiFePO4 battery of the latest generation. When fully charged, lfp 12.8/160 stores a whopping 1152Wh of power with a very low self-discharge rate and superior cycle life. The lfp battery family from Victron already features integrated cell balancing and a bms (battery management system) interface. important technical data of the lfp bms 12.8v 160Ah: Rated voltage: 12.8v Victron Part number: bat512116610 Rated energy at 25°c*: 2048Wh Rated capacity at 25°C/0°C/-25°C: 160Ah / 130Ah / 80Ah Number of cycles at 80%/70%/50% depth of discharge: 2500 / 3000 / 5000 cycles recommended continuous discharge current: <=160A maximum continuous discharge current: 400a Weight: 20kg Connection terminal: M8 For more technical data, please refer to the official datasheet and below in the "technical data" section. Efficient and economical: the lfp-bms 12.8v 160Ah Although Victrons lfp-batteries are expensive compared to AGM batteries or GEL batteries, the higher purchase cost will more than pay off in most cases. With a service life of up to 5000 cycles, they exceed the maximum service life of even the best lead-acid batteries many times over. In addition, the lfp 12.8/160 scores 70% in terms of space savings and weight savings. The energy efficiency of 92% is also significantly higher than the 80% of lead-acid batteries, which can be essential for off-grid systems, especially for off-grid solar and/or wind power plants. Multi-talented: infinitely flexible with lithium technology from Victron Energy lfp lithium batteries from Victron can be integrated into almost all common applications. In the mobile sector, this technology has played an important role for quite some time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and that irregular charging cannot harm them, they are also making their way into land applications and can now be found in almost all system classes. Parallel and series connection up to max. 3000ah at 48v Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 10 batteries of this type in parallel and up to 4 blocks of 10 in series, resulting in a maximum of 3000 Ah at 48 V - this corresponds to a maximum storable nominal energy of around 154,000 Wh 5 models available in total The lfp-bms family consists of a total of 5 models. In addition to the lfp 12.8/160, there are the following other power classes: 12.8v 60Ah LiFePO4 768Wh 12.8v 90Ah LiFePO4 1152Wh 12,8v 200Ah LiFePO4 2560Wh 12.8v 300Ah LiFePO4 3840Wh IMPORTANT NOTICE: The use of an additional bms is mandatory to interrupt or shut down the load when the voltage of a battery cell drops below 2.5v or to stop charging when the voltage of a battery cell rises above 4.2v and to shut down the system when the temperature of the cell exceeds 50°c. For this you have the choice between the bms 12/200 and the ve.bus bms - For further details of the devices, please refer to the respective article descriptions. Due to the classification as dangerous goods, this product will be shipped by freight forwarding!Scope of delivery: 1x LiFePO4 battery lfp-CB 12.8/160, Victron Energy bat512116610 1x instruction manual more resources about lithium batteries: Victron LiFePO4 Batterien - All product families from the LiFePO4 battery category by ve Category Lithium Batteries - Total program with all available batteries from this range

With the delta Pro Extra Smart battery (mpn 50034006) from EcoFlow, you can expand the capacity of your delta Pro Powerstation by 3.6kWh. In total, you can add two Extra Smart batteries to the Powerstation, for a total capacity of 10.8kWh.Features of the EcoFlow delta Pro Extra Smart BatteryExpansion battery for the delta Pro PowerstationEnormous capacity of 3.6kWhPowerstation expandable by up to two batteriesPerfect for expanding your back-up solution in case of emergencyCharging methods: AC outlet, 12V adapter, solar panelCharging only possible in combination with the PowerstationWith LCD display to show remaining charge, remaining time, off and onModular expansion of your PowerstationDouble or triple the capacity of your delta Pro Powerstation and extend the runtime of your most important devices. Ideal for use at home, as a backup during power outages, or for camping and outdoor adventures. The expansion battery can be charged with the same capabilities of the Pro Powerstation as long as they are connected. They charge/discharge simultaneously so the percentage battery level remains the same for both units.Specifications:Dimensions: 635 x 285 x 416 mmWeight: approx. 39 kg24 months manufacturer warrantyCapacity: 3600WhCell chemistry: LFPLifetime: 3500 cycles to 80% capacityScope of delivery:1x EcoFlow delta Pro Extra Smart battery1x delta Pro Extra battery cable1x user manual

The LiFePO4 12/50 Smart Pro from Offgridtec (mpn 2-01-010865) is an intelligent, 12.8 v 50 Ah lithium iron phosphate battery of the latest generation with Bluetooth communication function. Its rated energy is 640 Wh and it weighs only 6.4 Kg. Depending on the discharge battery, our LiFePO4 12/50 Smart Pro manages up to 5000 cycles, surpassing even the best agm and GEL batteries in terms of durability many times over. Together with the free Offgridtec Akkuviewer Smart App for iOS and Android devices the function monitoring of the lithium battery allows. The constitution of the battery is extremely solid in physical terms. This predestines it for use in a particularly wide range of applications. The integrated bms protection ensures a high level of safety for the battery and the user. Recommended areas of use include: Motor homes, boats, stationary solar systems in the private or commercial sector. Features of the Offgridtec LiFePO4 12/50 Smart Pro 50Ah very high energy density at low weight integrated Bluetooth for connection with the free Offgridtec Akkuviewer Smart App integrated bms for with numerous protections 100% of capacity usable when needed 60% lighter than agm batteries up to 3 times as many cycles as conventional lead-acid batteries less than 3% self-discharge, easy to store wide operating temperature range Technical features LiFePO4 12/50 Smart Pro Offgridtec Part number: 2-01-010865 Rated energy: 640 Wh Rated voltage: 12.8 v Capacity: 50 Ah Dimensions: 197 x 169 x 165 mm Weight: 6,4 Kg Parallel connection: unlimited Series connection: max. four Smart Pro 12/50 Mounting position: any Number of cycles at 80% discharge: >2000 cycles Operating temperature range charging: -5°C - 45°C Operating temperature range discharging: -20°C - 60°C Maximum continuous discharge current: 50A Maximum continuous charging current: 50A End of charge voltage: 14.6v Storage temperature: -10°C - 35°C Smart: Retrieve battery status via battery viewer smart app Thanks to the integrated Bluetooth module, you can call up important parameters of the battery on your smartphone or a tablet at any time. The required "Offgridtec Akkuviewer Smart" app from Offgridtec is available free of charge in the Apple app store or for Android devices in the Google play store. The following data can be displayed via Akkuviewer Smart: Current state of charge as a percentage display - SOC Current power consumption Current battery voltage Number of cycles so far Remaining runtime and some more... Due to the classification as dangerous goods, this product will be shipped by freight forwarding! Scope of delivery: 1X Offgridtec 2-01-010865, LiFePO4 12/50 Smart Pro 50Ah 640Wh 12.8v 1x instruction manual

The ppp-40 12.8v 40Ah (mpn ppp012040000) from Victron Energy is a mobile lithium-ion storage solution based on intrinsically safe Li-FePO4 cells. With a rated capacity of 40Ah, the ppp-40 is the largest member of the Peak Power Pack family from Victron. At a nominal voltage of 12.8v, the battery pack offers 512Wh of energy for on-the-go use. In addition to very low self-discharge, this power pack also shines with excellent peak output current performance.important performance features of the peak power pack ppp-40 40Ah: low dead weight with only 8,6Kg, therefore ideal for outdoor use 40Ah (= 512Wh) storage capacity, 12,8v nominal voltage- integrated storage mode prevents too deep discharge during long time storage Output 1: integrated (maneuvering aid) high current output e.g. for maneuvering aid of small trailers Output 2: output for 12v DC power consumers with low current demand (max. 30a) based on latest LiFePo4 cell technology has a built-in charger for charging with 230v mains power Input 1: can be served by different DC power sources such as solar panels as long as they meet the current input specifications (see datasheet) Input 2: 230v mains connection for charging like mains power offers high safety even in case of improper use resistant to deep discharge and insufficient charging Also charging via vehicle battery at input 1 possible Remote on/off and status indication VE.Direct connection for pairing with smartphone or computer (optional accessory required) solid performance in solar as well as other applicationsWorks great in applications where charging current can be highly erratic, such as solar. Deep discharge and insufficient charging, or irregular cycling, would quickly damage a conventional lead-acid battery. For the LiFePO4 based ppp-40 Peak Power Pack 40Ah, however, such usage is not a problem.Smart energy storage: VE.Direct compatiblethe integrated VE.Direct connection allows you to connect your Peak Powerpack 40Ah 12.8v via the optionally available Bluetooth Smart Dongle with your app-enabled smartphone or tablet. Alternatively, you can also connect the VE.Direct to usb interface cable to connect the power pack to your computer or notebook.important technical features of the ppp-40 40Ah 12.8v power pack: Weight: 8.6Kg Dimensions: 212 x 190 x 172 mm monitoring and control: via supplied push button with 2 leds Communication: via integrated VE.Direct connection Due to the classification as dangerous goods, this product will be shipped by freight forwarding!Scope of delivery:1x Victron Energy Peak Power Pack ppp-40 12,8v 40Ah 512,Wh, mpn PPP0120400001x mounting strap1x power adapter1x power cable1x push button with cable (2 m) and bicolor led 1x instruction manual

The LiFePO4 12.8v 100ah Smart Battery (mpn bat512110610) from Victron Energy is a LiFePO4 battery of the latest generation. When fully charged, the LiFePO4 12.8/100 Smart stores a whopping 1280Wh of power, with a very low self-discharge rate and superior battery life. The LiFePO4 battery family from Victron already features integrated cell balancing and a bms (battery management system) interface. The integrated Bluetooth for connection with the Li-Ion App completes the overall package. Victron LiFePO4 12.8v 100ah Smart Battery Rated voltage: 12.8v built-in bluetooth to connect with Victron Li-Ion app Victron Part number: bat512110610 Rated energy at 25°c*: 1280Wh Rated capacity at 25°c/0°c/-25°c: 100ah / 80Ah / 50Ah Number of cycles at 80%/70%/50% depth of discharge: 2500 / 3000 / 5000 cycles recommended continuous discharge current: 100a maximum continuous discharge current: 200a Weight: 16kg Connection terminal: m8 For more technical data, please refer to the official data sheet and below in the "technical data" section. efficient, economical..: LiFePO4 12.8v 100ah Smart Battery While LiFePO4 batteries are expensive compared to agm batteries or gel batteries, the higher initial cost will more than pay for itself in most cases. With a lifetime of up to 5000 cycles, they exceed the maximum lifetime of even the best lead-acid batteries many times over. In addition, the lfp 12.8/100 scores 70% in terms of space savings and weight savings. The energy efficiency of 92% is also significantly higher than the 80% of lead-acid batteries, which can be of essential importance for off-grid systems, especially for off-grid solar and/or wind power plants. Multi-talented: infinitely flexible with lithium technology from Victron Energy LiFePO4 smart batteries from Victron can be implemented in almost all common applications. In the mobile sector, this technology has played an important role for quite some time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and that irregular charging cannot harm them, they are also making their way into land applications and can now be found in almost all system classes. Parallel and series connection up to max. 3000ah at 48v Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 10 batteries of this type in parallel and up to 4 blocks of 10 in series, resulting in a maximum of 3000Ah at 48v - this corresponds to a maximum storable nominal energy of around 154,000 Wh (when used with the 300Ah 12.8v version). integrated Bluetooth for smart handling Cell voltages, temperature and alarm status can be monitored via Bluetooth. This is very useful to detect a (possible) problem like cell imbalance in time. IMPORTANT NOTICE: The use of an additional bms is mandatory to interrupt/shut down the load when the voltage of a battery cell drops below 2.5v or to stop charging when the voltage of a battery cell rises above 4.2v and to shut down the system when the temperature of the cell exceeds 50°c. For this you have the choice between the bms 12/200 and the ve.bus bms - For further details of the devices, please refer to the respective article descriptions. Due to the classification as dangerous goods, this product will be shipped by freight forwarding!Scope of delivery: 1x Victron Energy bat512110610 LiFePO4 12.8v 100ah Smart Battery1x user manual more resources about lithium batteries: Victron LiFePO4 Batterien - All product families from the LiFePO4 battery category by ve Category Lithium Batteries - Total program with all available batteries from this range

The lithium SuperPack lsp 25.6/50 from victron Energy (mpn bat524050705) is a lithium iron phosphate battery (LiFePO4) of the latest generation. With a capacity of 50 Ah and a nominal voltage of 25.6 v, it provides a solid 1280 Wh of energy at a weight of only 14 kilos. The Lithium SuperPack series is equipped with a bms, which takes over the most important tasks in the operation of a LiFePO4 battery. This means that the battery can be put into operation immediately without external accessories. Features of the victron lsp 25.6/50 battery victron Energy part number: bat524050705 Energy content: 1280Wh, nominal battery voltage: 25.6 v Capacity 50 Ah, 2500 cycles at DOD80% integrated battery management system requires no further external hardware for operation significantly lighter than comparable agm or gel batteries supports parallel operation the lsp 25,6/50 - strong LowCost LiFePO4 battery in top quality The Lithium SuperPack series is victrons basic LifePO4 series and reduced to the most necessary to offer a model that is especially designed for a low purchase price. Compared to other LiFePO4 series from victron it does not have any possibilities to evaluate status information or to analyze data or any options for system integration. On the other hand, it is very easy to handle and can be put into operation immediately without any additional accessories. The cycle stability is also impressive: 2500 cycles are possible with 80 percent discharge and even more with less discharge. the integrated bms The integrated bms ensures that the battery cannot be damaged by cell overvoltage or cell undervoltage and provides the necessary voltage balance between the individual cells. The performance scope of the bms is rounded off by protection against overtemperature. Parallel operation possible The lsp 25.6/50 can be operated in parallel with any number of identical batteries to increase energy.Due to the classification as dangerous goods, this product is shipped by forwarding agency! Scope of delivery 1x victron bat524050705 lsp 25,6/50 Lithium SuperPack

The LiFePO4 25.6v 100Ah Smart battery from Victron Energy (mpn bat524110610) is a latest generation LiFePO4 battery. When fully charged, the LiFePO4 25.6/100 Smart stores a whopping 2560Wh of power, with very low self-discharge and superior cycle life. The LifePO4 battery family from Victron already features integrated cell balancing and a bms (battery management system) interface. The integrated Bluettoth for connection with the Li-Ion App completes the overall package. Features LiFePO4 25.6v 100Ah Smart Battery Rated voltage: 25.6v Built-in Bluetooth to connect with Victron Li-Ion app Rated energy at 25°c: 2560Wh Rated capacity at 25°c / 0°c / -20°c: 100Ah / 80Ah / 50Ah Number of cycles at depth of discharge 80% / 70% / 50%: 2500 / 3000 / 5000 Max. continuous discharge current: 200a Recommended continuous discharge current: <100a Weight: 28 kg Dimensions: 197 x 650 x 163 mm For more technical data, see the official data sheet and below in the "technical data" section. Efficient, economical..: LiFePO4 25.6v 100Ah Smart Battery While LiFePO4 batteries are expensive compared to agm or gel batteries, the higher initial cost will more than pay for itself in most cases. With a lifetime of up to 5000 cycles, they exceed the max. lifetime of even the best lead-acid batteries many times over. In addition, the lfp 25.6/100 scores 70% in terms of space savings and weight savings. The energy efficiency of 92% is also significantly higher than the 80% of lead-acid batteries, which can be of essential importance for off-grid systems, especially for off-grid solar and/or wind power plants. Multi-talented: infinitely flexible with lithium technology from Victron Energy LiFePO4 smart batteries from Victron can be implemented in almost all common applications. In the mobile sector, this technology has played an important role for quite some time. But thanks to the fact that these batteries are much easier to charge than conventional lead-acid batteries and that irregular charging cannot harm them, they are also making their way into land applications and can now be found in almost all system classes Parallel and series connection up to max. 1000Ah at 48v Thanks to the integrated cell balancing and cell monitoring function, you can easily connect up to 10 batteries of this type in parallel and up to 4 blocks of 10 in series, resulting in a maximum of 1000Ah at 48v Integrated Bluetooth for smart handling Cell voltages, temperature and alarm status can be monitored via Bluetooth. This is very useful to detect a (possible) problem like cell imbalance in time.Important notice: The use of an additional bms is mandatory to interrupt/shut down the load when the voltage of a battery cell drops below 2.5v or to stop charging when the voltage of a battery cell rises above 4.2v and to shut down the system when the temperature of the cell exceeds 50°c.For this you have the choice between the bms 12/200 and the VE.Bus bms - for further details of the devices, please refer to the respective article descriptions Due to the classification as dangerous goods, this product will be shipped by freight forwarding!Scope of delivery: 1x Victron Energy bat524110610 25,6v 100Ah Smart Battery1x Instruction manual

The lithium SuperPack lsp 12.8/100 from victron Energy (mpn bat512110710) is a high-current lithium iron phosphate battery (LiFePO4) of the latest generation. With a capacity of 100 Ah and a nominal voltage of 12.8 v, it provides a solid 1280 Wh of energy at a weight of only 14 kilos. The Lithium SuperPack series is equipped with a bms, which takes over the most important tasks in the operation of a LiFePO4 battery. This means that the battery can be put into operation immediately without external accessories. Features of the victron lsp 12.8/100 battery victron Energy part number: bat512110710 Energy content: 1280Wh, nominal battery voltage: 12.8 v Capacity 100 Ah, 2500 cycles at DOD80% integrated battery management system requires no further external hardware for operation significantly lighter than comparable agm or gel batteries supports parallel operation Maximum cont. charging current: 100A The lsp 12,8/100- strong LowCost LiFePO4 battery in top quality The Lithium SuperPack series is victrons basic LifePO4 series and reduced to the most necessary to offer a model that is especially designed for a low purchase price. Compared to other LiFePO4 series from victron it does not have any possibilities to evaluate status information or to analyze data or any options for system integration. On the other hand, it is very easy to handle and can be put into operation immediately without any additional accessories. The cycle stability is also impressive: 2500 cycles are possible with 80 percent discharge and even more with less discharge. The integrated bms The integrated bms ensures that the battery cannot be damaged by cell overvoltage or cell undervoltage and provides the necessary voltage balance between the individual cells. The performance scope of the bms is rounded off by protection against overtemperature. Parallel operation possible The lsp 12.8/100 can be operated in parallel with any number of identical batteries to increase energy.Due to the classification as dangerous goods, this product is shipped by forwarding agency! Scope of delivery 1x victron bat512110710 lsp 12,8/100 Lithium SuperPack High Current