The 10m Plug & Play Micro Inverter connection cable from Offgridtec (mpn 8-01-013602) connects your micro inverter (e.g.Envertech) with a standard grounded socket (Schuko). The cable is equipped with the Betteri bc01 socket part on the inverter side and an angled Schuko plug type f on the socket side. This cable is used for the connection between the micro inverter and your house power supply. special features of the P&P inverter connection cable Immediately ready for use since delivered as Plug & Play version technical features of the 5m Microinverter connection cable Offgridtec-Part number: 8-01-013602 Cable length: 10m Usage; Connection of compatible micro inverters to the house power grid via feed-in socket Cable type: heavy rubber cable H07RN-f 3x2,5 from Lapp-Kabel Connector on socket side: Schuko plug type-f angled Connector on inverter side: Betteri bc01 socket compatible micro inverters EVT Inverter Series from Envertech evt300s / evt560s / EVT1200S TSUN tsol M350/M800 Bosswerk mi300 / MI600 Hoymiles mi-300 / MI-600 a.o. (e.g. Huayu) Scope of delivery: 1x Offgridtec 8-01-013602 10m plug & play connection micro inverter to power outlet

3m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The equipped MC4-connectors are as well German originals made by MultiContact. The final assembly of these cables takes place in our manufactory in Lower Bavaria. This connection cable is fabricated with professional tools to ensure an extremely high tensile strength which resists even hardest conditions and constant environmental influences. Application: ideal for flexible connections of solar modules on different roof sides or module rows for parallel connection of solar modules Advantages: Plug and Play - unpack and install - you do not need any professional tools irradiated solar cable (only two producers worldwide provide this technology) planning certainty thanks to a long manufacturer's warranty of 10 years available in different lengths and colors and therefore suitable for nearly every task Technical data: cable type: Lapp Ölflex XLR-R 6mm² TÜV- and UL-certified max. voltage: 1000V length: 3m equipped with 1x MC4 male + 1x MC4 female

The EcoFlow solar extension cable (mpn 50004052) is equipped with solar connectors male and female per wire. This allows you to extend the solar cables of the EcoFlow Powerstations river and delta by 3m.PropertiesLength: 3mEach with universal solar connectors male and female per wireideal for flexible cabling of solar module and powerstationPlug and Play - unpack and insertScope of delivery:1x EcoFlow solar cable with solar connectors 3m

This 2-core cable connects charge controller and solar module in a professional way. It is equipped with MC4-connectors (module) and ferrules (charge controller). Most 12V modules have MC4-plugs - if other plugs are needed you find adaptors in our shop. All components are crimped with professional tools and show excellent connection characteristics. The cables are either made by Helukabel or EBS-Solar, both German manufacturers. Solar cable: 4mm cable diameter double-insulated very flexible VDE 0295 class 5 and IEC 60228 restistant against UV, ozone, weather, water, chemicals, oil, fire (according to VDE 0482-332-2, DIN) type of protection (plugged): IP67 temperature range: -40°C to 90°C insulation material: PA connection system: snap-in cable relief according to IEC 61984 contact system: MC4 contact fins contact material: tinned copper flame class: UL94-V0 protection class: II system voltage up to 1000V Ferrules: material: tinned copper length: 12mm

This two-cored solar cable connects charge controller and solar modules within a system in a professional way. On the module side it is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules. Most 12V-modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional Tools. Details: length: 1m MC4-connectors 6mm² conductor diameter double-isolated resistant against: UV, ozone, weather, water very flexible

This two-cored solar cable connects charge controller and solar modules within a system in a professional way. On the module side it is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules. Most modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional tools and provide a high connection quality. For this cable we use either components from Helukabel or EBS-Solar - both German manufacturers. Data cable: diameter 4mm double-isolated very flexible VDE 0295 class 5 and IEC 60228 resistant against UV, ozone, weather,water, chemicals, oil fire-resistant according to VDE 0482-332-2, DIN safe from touch protection IP: unplugged - IP2X; plugged - IP67 temperature range: -40° ...60° C isolation material: PA locking-system: snap-in cable strain relief according to IEC 61984 contact system: MC Multilam contact material: tinned copper flame class: UL94-V0 protection class II system voltage up to 1000V Data ferrules: material: tinned copper length: 12mm

This 2-core solar cable professionally connects the solar charge controller to the solar modules in a solar system. On the module side the cable has original Multi-Contact mc4 connectors and on the charge controller side the cable ends are cut for easy stripping of the sheath and exposure of the bare wire. The cable can be connected to any charge controller with appropriate receptacle (min. 4mm²). Most 12v modules have mc-4 connectors. If your module has other plugs, you will find the appropriate adapters in our store.All components were crimped with professional tools and show an optimal connection quality. The processed solar cable comes from the manufacturer Lapp-Kabel and is a top brand product.Properties solar cable- 4mm² wire cross section- double insulated- very flexible- vde 0295 class 5 and iec 60228- resistant to: uv, ozone, weather, water- very resistant to chemicals and oil -fire resistant according to vde 0482-332-2Properties mc-4 plug and socket- Protection against contact, unplugged IP2X- Protection class, mated IP67- Temperature application range -40° ...90° C- Insulation material PA- Locking system Snap-in- Cable strain relief according to iec 61984- Contact system MC contact lamellae- Contact material copper, tin-plated- Flame class UL94-V0- Protection class II- System voltage up to 1000V- Rated current up to- Properties ferrules- Material: copper / tinLength: 1m

1.5m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The equipped MC4-connectors are as well German originals made by MultiContact. The final assembly of these cables takes place in our manufactory in Lower Bavaria. This connection cable is fabricated with professional tools to ensure an extremely high tensile strength which resists even hardest conditions and constant environmental influences. Application: ideal for flexible connections of solar modules on different roof sides or module rows for parallel connection of solar modules Advantages: Plug and Play - unpack and install - you do not need any professional tools irradiated solar cable (only two producers worldwide provide this technology) planning certainty thanks to a long manufacturer's warranty of 10 years available in different lengths and colors and therefore suitable for nearly every task Technical data: cable type: Lapp Ölflex XLR-R 6mm² TÜV- and UL-certified max. voltage: 1000V length: 1.5m equipped with 1x MC4 male + 1x MC4 female

1m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp the leading cable producer in Germany.The equipped MC4-connectors are as well German originals made by MultiContact. The final assembly of these cables takes place in our manufactory in Lower Bavaria. This connection cable is fabricated with professional tools to ensure an extremely high tensile strength which resists even hardest conditions and constant environmental influences. Application: ideal for flexible connections of solar modules on different roof sides or module rows for parallel connection of solar modules Advantages: Plug and Play - unpack and install - you do not need any professional tools irradiated solar cable (only two producers worldwide provide this technology) planning certainty thanks to a long manufacturer's warranty of 10 years available in different lengths and colors and therefore suitable for nearly every task Technical data: cable type: Lapp Ölflex XLR-R 6mm² TÜV- and UL-certified max. voltage: 1000V length: 1m equipped with 1x MC4 male + 1x MC4 female

This two-cored solar cable connects charge controller and solar modules within a system in a professional way. On the module side it is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules. Most modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional tools. Details: length: 3m MC4-connectors 6mm conductor diameter double-isolated resistant against: UV, ozone, weather, water very flexible

This double-core solar cable connects module and charge controller professionally. On the module-side this cable is equipped with original MC4-connectors and ferrules on the controller-side. Most 12V modules come with MC4-connectors. If your module is equipped with other connectors you find fitting adaptors in our shop. All components were crimped with professional tools and provide an excellent connection quality. Details: Length: 8m MC4-plugs 6mm² diameter double-isolated UV-, ozone-, weather- and water-resistant very flexible

This two-cored solar cable connects charge controller and solar modules within a system in a professional way. On the module side it is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules. Most modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional tools. Details: length: 5m MC4-connectors 6mm conductor diameter double-isolated resistant against: UV, ozone, weather, water very flexible

6mm² solar cable from Helu-Kabel (made in Germany) with original MC4-plug - completely prefabricated. These cables are prepared with special tools and can be used instantly.Features: original MC4-plugs prefabricated with special tools plug & play made in Germany Technical data: cable diameter: 6mm² cable length: 50cm plugs: 2 x MC4-plugs (male / female)

Irradiated 8m 2x4mm² MC4 connection cable (equipped with MC4 plug and socket on each cable) from Lapp, one of the leading cable manufacturers in Germany. Also the MC4-plugs are MultiContact-originals. These components are assembled in our manufactory in Lower Bavaria. To produce a high quality cable we use special tools to ensure an extremely high tensile strength which can stand also tough circumstances. Even weather influences won't harm this cable for a very long time. Application: ideal for flexible connections of solar modules on different roof sides or module rows for the parallel installation of solar modules Advantages: plug & play: You don't need any tools - simply unpack and install irradiated solar conductor available in different lengths and colors and therefore suitable for various applications Technical data: Cable type: Lapp Ölflex XLR-R 6mm² Max. voltage: 1000V Length: 2x8m Equipped with: 1 x MC4 male + 1 x MC4 female on each cable  

This two-cored solar cable connects charge controller and solar modules within a system in a professional way. On the module side it is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules. Most modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional Tools. Details: suitable for 12V-systems length: 20m MC4-connectors 6mm conductor diameter double-isolated resistant against: UV, ozone, weather, water very flexible

This double-core solar cable connects module and charge controller professionally. On the module-side this cable is equipped with original MC4-connectors and ferrules on the controller-side. Most 12V modules come with MC4-connectors. If your module is equipped with other connectors you find fitting adaptors in our shop. All components were crimped with professional tools and provide an excellent connection quality. Because of it's diameter of 4mm² this cable is suitable only for 24V-systems or above from a lenght of 5m on. For 12V-systems you better use a 6mm²-cable. Details: Suitable for 24V-systems Length: 10m MC4-connectors 4mm conductor diameter Double-isolated UV-,ozone, weather- and water-resistant Very flexible MC4 connectors - touchproof, unplugged IP2X - protection, plugged IP67 - temperature range: -40° to 90° C - isolation material PA - snap-in lock-system - cable strain relief according IEC 61984 - contact-system MC-contact lamellars - contact material: tinned copper - flame class UL94-V0 - protection class II - system voltage max. 1000V - material: tinned copper

The 10m Plug & Play Micro Inverter connection cable from Offgridtec (mpn 8-01-013597) connects your micro inverter (e.g. AE-Conversion) with a common grounded socket (Schuko). The cable is equipped with original Wieland socket part rst20i3s on the inverter side and with angled Schuko plug type f on the socket side. This cable is used for the connection between micro inverter and your house mains. special features of the P&P inverter connection cable Immediately ready for use since delivered as plug & play version technical features of the 10m Microinverter connection cable Offgridtec-Part number: 8-01-013597 Cable length: 10m Usage; Connection of compatible micro inverters to the house power grid via feed-in socket Cable type: heavy rubber cable H07RN-f 3x2,5 from Lapp-Kabel Connector on socket side: angled Schuko plug type-f Connector on inverter side: Wieland 96.031.4153.1 connector rst20i3s b1 zr2 (Art. No 8-76-011185) compatible micro inverter INV Inverter Series from AE-Conversion Scope of delivery: 1x Offgridtec 8-01-013597 10m Plug & Play connection micro inverter to power outlet

This two-cored solar cable connects charge controller and solar modules within a system in a professional way. On the module side it is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules. Most modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional Tools. Details: suitable for 12V-systems length: 15m MC4-connectors 6mm conductor diameter double-isolated resistant against: UV, ozone, weather, water very flexible

This two-cored solar cable connects charge controller and solar modules within a system in a professional way. On the module side it is equipped with original Multi-Contact MC4-plugs - the charge controller side with ferrules. Most modules work with MC4-plugs. If not you'll find fitting adaptors in our shop. All components are prepared with professional Tools. Details: suitable for 24V-systems or higher length: 10m MC4-connectors 6mm conductor diameter double-isolated resistant against: UV, ozone, weather, water very flexible

Irradiated 10m 6mm² MC4 connection cable (equipped with MC4 plug and socket) from Lapp, one of the leading cable manufacturers in Germany.Also the MC4-plugs are MultiContact-originals. These components are assembled in our manufactory in Lower Bavaria. To produce a high quality cable we use special tools to ensure an extremely high tensile strength which can stand also tough circumstances.Even weather influences won't harm this cable for a very long time. Application: ideal for flexible connections of solar modules on different roof sides or module rows for the parallel installation of solar modules Advantages: plug & play: You don't need any tools - simply unpack and install irradiated solar conductor available in different lengths and colors and therefore suitable for various applications Technical data:Cable type: Lapp Ölflex XLR-R 6mm² - TÜV + UL testedMax. voltage: 1000VLength: 10mEquipped with: 1 x MC4 male + 1 x MC4 female

The Offgridtec Connection Cable Pro 8m 2x2.5mm Ölflex Solar XLS-R Twin Cable for small modules is equipped with 2.5x10mm ferrules on the charge controller side and 2.5mm R3.5 ring cable shoes on the module side.These cables are designed especially for a direct connection to the module terminal and compatible with our small 10-30W modules. The are also suitable for modules of other brands with 3.5M - 3M terminals, of course.Instantly ready to setup this cable saves a lot of effort during installation. This cable is made out of ÖLFLEX© SOLAR XLS-R T 2x5mm - an irradiated high-end cable made in Germany. The optimized design makes this cable slim, light and resistant. If needed this cable can be separated into to conductors without any special tools, yet the connection between them is extremely robust. Details: weather-/UV-resistant according to HD 605/A1 ozone-resistant according to EN50396 halogen-free and flame-retardant good abrasion-characteristics XLS-R T=X-Linked Standard-Reduced Twin - reliable irradiated quality Standards:This cable is also available as TÜV-PV1-F-certified version on demand. Application:Ideal for stand-alone solar systems, on-roof-systems, solar-fields, mobile or built-in systems. Purpose: Easy to split into two separate cables The outer diameter allows space- and weight-saving laying Resistant against mechanical influences Reduces flame spreading and development of toxic smoke gas in case of a fire Meter marks show the exact amount of the used cable during installation Structure: Fine-wired tinned copper conductor Wire isolation made of irradiated copolymer Coating made of irradiated copolymer Coating color black Conductors connected but separable Technical data: Conductor ident code: black/red-blue/red Classification: ETIM 5.0 Class-ID: EC001578 ETIM 5.0 Class-Description: flexible conductor Cable structure: fine-wire according to VDE 0295, class 5 / IEC 60228 class 5 Min. bending radius: fixed installation 4x outer diameter Nominal voltage: AC U0/U: 600/1000V DC U0/U: 900/1500V Max. permitted system voltage: DC 1.8kV (conductor-conductor, non-grounded system) Testing voltage: AC 6500V Temperature range: 40°C to +100°C max. cable temperature

Irradiated 5m 6mm² MC4 connection cable (equipped with MC4 plug and socket) from Lapp, one of the leading cable manufacturers in Germany.Also the MC4-plugs are MultiContact-originals. These components are assembled in our manufactory in Lower Bavaria. To produce a high quality cable we use special tools to ensure an extremely high tensile strength which can stand also tough circumstances.Even weather influences won't harm this cable for a very long time. Application: ideal for flexible connections of solar modules on different roof sides or module rows for the parallel installation of solar modules Advantages: plug & play: You don't need any tools - simply unpack and install irradiated solar conductor available in different lengths and colors and therefore suitable for various applications Technical data:Cable type: Lapp Ölflex XLR-R 6mm² - TÜV + UL testedMax. voltage: 1000VLength: 5mEquipped with: 1 x MC4 male + 1 x MC4 female

2m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The equipped MC4-connectors are as well German originals made by MultiContact. The final assembly of these cables takes place in our manufactory in Lower Bavaria. This connection cable is fabricated with professional tools to ensure an extremely high tensile strength which resists even hardest conditions and constant environmental influences. Application: ideal for flexible connections of solar modules on different roof sides or module rows for parallel connection of solar modules Advantages: Plug and Play - unpack and install - you do not need any professional tools irradiated solar cable (only two producers worldwide provide this technology) planning certainty thanks to a long manufacturer's warranty of 10 years available in different lengths and colors and therefore suitable for nearly every task Technical data: cable type: Lapp Ölflex XLR-R 6mm² TÜV- and UL-certified max. voltage: 1000V length: 2m equipped with 1x MC4 male + 1x MC4 female

This double-core solar cable connects module and charge controller professionally. On the module-side this cable is equipped with original MC4-connectors and ferrules on the controller-side. Most 12V modules come with MC4-connectors. If your module is equipped with other connectors you find fitting adaptors in our shop. All components were crimped with professional tools and provide an excellent connection quality. Because of it's diameter of 4mm² this cable is suitable only for 24V-systems or above from a lenght of 5m on. For 12V-systems you better use a 6mm²-cable. Details: Suitable for 24V-systems Length: 7m MC4-connectors 4mm conductor diameter Double-isolated UV-,ozone, weather- and water-resistant Very flexible MC4 connectors - touchproof, unplugged IP2X - protection, plugged IP67 - temperature range: -40° to 90° C - isolation material PA - snap-in lock-system - cable strain relief according IEC 61984 - contact-system MC-contact lamellars - contact material: tinned copper - flame class UL94-V0 - protection class II - system voltage max. 1000V - material: tinned copper   *German Association for Technical Inspection