Mobile Black
Filter
–
Mobile Black
5 Results
Sorting
VAT-exempt delivery possible*
Preorder 13.05.2024
4-01-012877
Offgridtec® MobileBlack l 155w camper Solaranlage 30a mppt duo charge controller OlP perc solar panel
The Offgridtec® Mobileblack series impresses with an appealing optical design in elegant black and with its extremely convincing performance parameters. Starting with the olp solar modules in the most modern shingle design and an outstanding cell efficiency of over 22%, up to the Offgridtec® mppt Pro dual charge controller, one can really speak here of a successful selection and product composition from the house Offgridtec.
155w Mobileblack l Caravan complete system
This complete system contains everything you need to charge your batteries mobile. The dual controller included in the set allows you to charge your on-board battery and the starter battery at the same time, as it has a corresponding secondary charge output. The scope of delivery includes extensive information material, in which the assembly and connection are explained step by step - this concerns both the technical connection and the bonding of the retaining spoilers and the roof duct. The grommet is made of the same material as the spoilers - the peg screw connection complies with protection class ip68 and is therefore absolutely watertight when installed correctly.
scope of delivery of the Mobileblack l 155w Caravan Solaranlage
1x Offgridtec® olp solar panel 150w V2 perc with shingle technology - 018480
1x Offgridtec abs cable gland 1-way - black with waterproof peg gland
1x Offgridtec 68cm abs mounting profiles (1pair) - for mounting the solar modules in black
1x Offgridtec 8m 2x6mm h07rnf - connecting cable solar module to solar charge controller in caravan design
1x Offgridtec 1,5m 10mm² battery connection cable with MIDI fuse holder and 40a MIDI fuse - connection cable solar charge controller to battery with battery terminals and m8 cable lug connection
1x Offgridtec® 30a mppt dual solar charge controller with auxiliary charge and aes switching output
1x remote display for mppt Pro Duo charge controller
1x Dekalin adhesive set with Dekasyl ms-5 polymer adhesive, Dekavator bonding agent, cleaning cloth and operating instructions
1x mc-4 extension cable 50cm for connecting a connection cable located on the module with the module connection cable
The Offgridtec® mppt Pro Duo 30a solar charge controller
The mppt Pro Duo controller can handle a maximum charge current of 30a. This means that this system is theoretically expandable to almost 400w solar module power - taking into account the module selection (expansion only with identical panels), an expansion of this system by a maximum of 1 module would probably make the most sense.in addition, the device has a secondary charge output via which the starter battery can be charged in parallel to the on-board battery during longer periods of standstill - a feature which is certainly very appreciated in the mobile home. So that in terms of efficiency can also be spoken of the optimum, the device also has an aes switching output - this allows in excess solar power, the automatic switching of refrigerators with "aes" from gas to 12v operation.
maximum charging current 30a - 390w module power theoretically usable
30a load output for 12v consumers directly on the charge controller
the clear remote display allows the controller to be mounted in hard-to-reach places in the vehicle without limiting the operation and overview of the system parameters
aes control signal for car refrigerator to avoid energy waste
100V maximum pv input voltage
Digital circuit control of adaptive three-stage charging mode to improve battery life
Max power point tracking technology with ultra-fast tracking speed and a guaranteed tracking efficiency of at least 99.5%
Dimensions: 24.7cm x 16.5cm x 6.9cm (lxwxh)
Weight: 1.4KG
Power consumption: 26mA at 12v
Active temperature equalization for optimal charging and ensuring long battery life
Support of all major battery types (lead acid, agm, GEl, liFePo4)
Max. Efficiency: 98%
The 150w V2 olp solar panel with the latest shingle technology
The 150w V2 olp solar module with perc technology used in the system impresses on the one hand with its unique module design with overlapping wafer arrangement (overlapping design), and on the other hand with its high module efficiency, which makes this module particularly interesting for applications on vehicles due to the limited space available.
Module voltage (Vmp): 19.4V
Max. Current (Imp): 7.74A
open circuit voltage (Voc): 22.90V
Short circuit current (Isc): 8.20A
Cell efficiency: >22%
Ambient temperature: -40°C - +85°C
Weight: 9,8KG
Dimensions: 670 x 1195 x 35mm
Protection class junction box: ip68 (waterproof)
The professional solar mounting system
Spoile profiles are the first choice especially for caravans and motorhomes when it comes to a clean mounting of the solar modules. If you mount the modules in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). Due to the closed construction of the spoiler, no branches or the like can get caught under the solar modules.
Dimensions spoiler: l x w x h: 68cm x 8.9cm (of which approx. 3cm bearing surface module per spoiler) x 6.5cm.
The bonding
A properly executed bonding is superior to any screw connection in the hard use of motorhomes or boats. On painted or GRP surfaces, a strength of more than 4 N/mm2 can be achieved, which would be a value calculated on the glued surface that could never be achieved with a screw connection in the thin aluminum or GRP carrier layer. This adhesive set allows even a layman to create an absolutely solid connection between spoilers and the respective substrate.
The Dekalin adhesive set contains all the components necessary so that even the do-it-yourself installer can create a professional connection. Stainless steel screws for fastening the solar modules are included as well as detailed bonding instructions. In addition, all you need is a standard hand lever press for cartridges and a lint-free cloth.
The abs mounting profiles
Cable penetrations from the roof into the interior are always quite tricky, since it must be ensured that even after years everything is absolutely tight and also remains tight.
This is because even the slightest water ingress can lead to often irreparable damage to the interior insulation and furnishings. especially since the moisture is often not noticed until quite late. For this reason, the roof penetrations were developed: The housings are made of the same uv- and weather-resistant material as the mounting brackets offered in the online store. They are extremely stable and absolutely slip-proof. The wide adhesive edge ensures an optimal seal. Glued the bushings with the adhesive set that you also use to glue the solar mounting brackets. The housings can also be painted as desired and thus adapted to the surface on which they are to be mounted
The professional cabling set
All necessary cables are delivered plug & play and are already pre-crimped with professional tools. So you don't need to buy special pliers for the mc-4 connectors.
Individual system adaptation possible on request
We strive to implement every wish of our customers in the best possible way. With the individual requirements of a Solarasystem, this is of course not always 100% possible. Therefore, if you need any customization on one of our systems just send us a mail to [email protected] - simply tell us briefly which system your request refers to, which modification you would like (e.g. additional module, color spoiler, adhesive or bushing, other charge controller, etc.) and you will receive a corresponding offer from our sales team as soon as possible. Any costs are to be inquired at the customer service.
scope of delivery:
1x Offgridtec 4-01-012877 Offgridtec® Mobileblack 150w 12v mppt caravan Solaranlage
The Offgridtec® Mobileblack series impresses with an appealing optical design in elegant black and with its extremely convincing performance param...
Product is expected to be back in stock on 13 May 2024
Product is expected to be back in stock on 13 May 2024
VAT-exempt delivery possible*
Preorder 13.05.2024
The Offgridtec® Mobileblack series impresses with an appealing optical design in elegant black and with its extremely convincing performance parameters. Starting with the olp solar modules in the most modern shingle design and an outstanding cell efficiency of over 22%, up to the Offgridtec® mppt Pro dual charge controller, one can really speak here of a successful selection and product composition from the house Offgridtec.
155w Mobileblack l Caravan complete system
This complete system contains everything you need to charge your batteries mobile. The dual controller included in the set allows you to charge your on-board battery and the starter battery at the same time, as it has a corresponding secondary charge output. The scope of delivery includes extensive information material, in which the assembly and connection are explained step by step - this concerns both the technical connection and the bonding of the retaining spoilers and the roof duct. The grommet is made of the same material as the spoilers - the peg screw connection complies with protection class ip68 and is therefore absolutely watertight when installed correctly.
scope of delivery of the Mobileblack l 155w Caravan Solaranlage
1x Offgridtec® olp solar panel 150w V2 perc with shingle technology - 018480
1x Offgridtec abs cable gland 1-way - black with waterproof peg gland
1x Offgridtec 68cm abs mounting profiles (1pair) - for mounting the solar modules in black
1x Offgridtec 8m 2x6mm h07rnf - connecting cable solar module to solar charge controller in caravan design
1x Offgridtec 1,5m 10mm² battery connection cable with MIDI fuse holder and 40a MIDI fuse - connection cable solar charge controller to battery with battery terminals and m8 cable lug connection
1x Offgridtec® 30a mppt dual solar charge controller with auxiliary charge and aes switching output
1x remote display for mppt Pro Duo charge controller
1x Dekalin adhesive set with Dekasyl ms-5 polymer adhesive, Dekavator bonding agent, cleaning cloth and operating instructions
1x mc-4 extension cable 50cm for connecting a connection cable located on the module with the module connection cable
The Offgridtec® mppt Pro Duo 30a solar charge controller
The mppt Pro Duo controller can handle a maximum charge current of 30a. This means that this system is theoretically expandable to almost 400w solar module power - taking into account the module selection (expansion only with identical panels), an expansion of this system by a maximum of 1 module would probably make the most sense.in addition, the device has a secondary charge output via which the starter battery can be charged in parallel to the on-board battery during longer periods of standstill - a feature which is certainly very appreciated in the mobile home. So that in terms of efficiency can also be spoken of the optimum, the device also has an aes switching output - this allows in excess solar power, the automatic switching of refrigerators with "aes" from gas to 12v operation.
maximum charging current 30a - 390w module power theoretically usable
30a load output for 12v consumers directly on the charge controller
the clear remote display allows the controller to be mounted in hard-to-reach places in the vehicle without limiting the operation and overview of the system parameters
aes control signal for car refrigerator to avoid energy waste
100V maximum pv input voltage
Digital circuit control of adaptive three-stage charging mode to improve battery life
Max power point tracking technology with ultra-fast tracking speed and a guaranteed tracking efficiency of at least 99.5%
Dimensions: 24.7cm x 16.5cm x 6.9cm (lxwxh)
Weight: 1.4KG
Power consumption: 26mA at 12v
Active temperature equalization for optimal charging and ensuring long battery life
Support of all major battery types (lead acid, agm, GEl, liFePo4)
Max. Efficiency: 98%
The 150w V2 olp solar panel with the latest shingle technology
The 150w V2 olp solar module with perc technology used in the system impresses on the one hand with its unique module design with overlapping wafer arrangement (overlapping design), and on the other hand with its high module efficiency, which makes this module particularly interesting for applications on vehicles due to the limited space available.
Module voltage (Vmp): 19.4V
Max. Current (Imp): 7.74A
open circuit voltage (Voc): 22.90V
Short circuit current (Isc): 8.20A
Cell efficiency: >22%
Ambient temperature: -40°C - +85°C
Weight: 9,8KG
Dimensions: 670 x 1195 x 35mm
Protection class junction box: ip68 (waterproof)
The professional solar mounting system
Spoile profiles are the first choice especially for caravans and motorhomes when it comes to a clean mounting of the solar modules. If you mount the modules in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). Due to the closed construction of the spoiler, no branches or the like can get caught under the solar modules.
Dimensions spoiler: l x w x h: 68cm x 8.9cm (of which approx. 3cm bearing surface module per spoiler) x 6.5cm.
The bonding
A properly executed bonding is superior to any screw connection in the hard use of motorhomes or boats. On painted or GRP surfaces, a strength of more than 4 N/mm2 can be achieved, which would be a value calculated on the glued surface that could never be achieved with a screw connection in the thin aluminum or GRP carrier layer. This adhesive set allows even a layman to create an absolutely solid connection between spoilers and the respective substrate.
The Dekalin adhesive set contains all the components necessary so that even the do-it-yourself installer can create a professional connection. Stainless steel screws for fastening the solar modules are included as well as detailed bonding instructions. In addition, all you need is a standard hand lever press for cartridges and a lint-free cloth.
The abs mounting profiles
Cable penetrations from the roof into the interior are always quite tricky, since it must be ensured that even after years everything is absolutely tight and also remains tight.
This is because even the slightest water ingress can lead to often irreparable damage to the interior insulation and furnishings. especially since the moisture is often not noticed until quite late. For this reason, the roof penetrations were developed: The housings are made of the same uv- and weather-resistant material as the mounting brackets offered in the online store. They are extremely stable and absolutely slip-proof. The wide adhesive edge ensures an optimal seal. Glued the bushings with the adhesive set that you also use to glue the solar mounting brackets. The housings can also be painted as desired and thus adapted to the surface on which they are to be mounted
The professional cabling set
All necessary cables are delivered plug & play and are already pre-crimped with professional tools. So you don't need to buy special pliers for the mc-4 connectors.
Individual system adaptation possible on request
We strive to implement every wish of our customers in the best possible way. With the individual requirements of a Solarasystem, this is of course not always 100% possible. Therefore, if you need any customization on one of our systems just send us a mail to [email protected] - simply tell us briefly which system your request refers to, which modification you would like (e.g. additional module, color spoiler, adhesive or bushing, other charge controller, etc.) and you will receive a corresponding offer from our sales team as soon as possible. Any costs are to be inquired at the customer service.
scope of delivery:
1x Offgridtec 4-01-012877 Offgridtec® Mobileblack 150w 12v mppt caravan Solaranlage
Product is expected to be back in stock on 13 May 2024
VAT-exempt delivery possible*
Preorder 10.05.2024
More versions available
4-01-014245-002
Offgridtec® MobileBlack xl 360w camper Solaranlage 30a mppt duo charge controller perc solar panel
The Offgridtec® MobileBlack series impresses with its appealing visual design in elegant black and its extremely convincing performance parameters. Starting with the OLP solar modules in state-of-the-art shingle design and an outstanding cell efficiency of over 22,68%, through to the Offgridtec® MPPT Pro dual charge controller, one can truly speak of a successful selection and product composition from Offgridtec.
MobileBlack XL Caravan Complete System
This complete system contains everything you need to charge your batteries on the move. In addition to charging your on-board battery, the dual regulator included in the set also allows you to charge the starter battery at the same time, as it has a corresponding secondary charging output. The scope of delivery includes extensive information material in which the assembly and connection are explained step by step - this applies to both the technical connection and the bonding of the retaining spoiler and the roof grommet. The roof duct is probably one of the most critical points, as this is where the transition to the interior of the camper takes place. The grommet is made of the same material as the spoiler - the PEG screw connection complies with protection class IP68 and is therefore absolutely waterproof when installed correctly.
Scope of delivery of the MobileBlack XL caravan solar system
Offgridtec® OLP solar module 180W V2 with shingle technology PERC (1x or 2x depending on choice)
1x Offgridtec® 30A MPPT dual solar charge controller with auxiliary charge and AES switching Output
1x remote display for MPPT Pro Duo charge Controller
1x Offgridtec ABS cable gland 1-way - black with waterproof PEG Gland
Offgridtec 68cm ABS mounting profiles (1 pair) - for mounting the solar modules in black (1x or 2x depending on choice)
1x Offgridtec 8m 2x6mm H07RNF - connection cable solar module to solar charge controller in caravan Version
1x Offgridtec 1.5m 10mm² battery connection cable with MIDI fuse holder - connection cable solar charge controller to battery with battery terminals and M8 cable lug Connection
1x Dekalin adhesive set with Dekasyl MS-5 polymer adhesive, Dekavator bonding agent, cleaning cloth and operating instructions
40A MIDI fuse
additional for 2 modules: 1x Offgridtec MC4 branching socket & 1x Dekalin Dekasyl MS-5 polymer adhesive
The Offgridtec® MPPT Pro Duo 30A Solar Charge Controller
The MPPT Pro Duo controller can handle a maximum charge current of 30A. This means that this system can theoretically be expanded to almost 400W solar module output - however, taking into account the module selection (expansion only with identical panels), an expansion by a maximum of 1 module would probably make the most sense with this system. In addition, the unit has a secondary charging output that can be used to charge the starter battery in parallel with the on-board battery during longer periods of standing - a feature that is certainly much appreciated in the mobile home. To ensure optimum efficiency, the unit also has an AES switching output - this enables refrigerators with "AES" to be switched automatically from gas to 12 V operation in the event of surplus solar power.
maximum charging current 30A - 390W module power theoretically usable
30A load output for 12V consumers directly at the charge Controller
the clear remote display allows the controller to be mounted in hard-to-reach places in the vehicle without restricting operation and overview of the system Parameters
AES control signal for car refrigerator to avoid energy waste
100V maximum PV input voltage
Digital circuit control of adaptive three-stage charging mode to improve battery life
Max power point tracking technology with ultra-fast tracking speed and guaranteed tracking efficiency of at least 99.5%.
Dimensions: 24.7cm x 16.5cm x 6.9cm (LxWxH)
Weight: 1.4KG
Power consumption: 26mA at 12V
Active temperature equalisation for optimal charging and ensuring long battery life
Supports all major battery types (lead acid, AGM, GEL, LiFePo4)
Max. Efficiency: 98
The 180W OLP solar module with the latest shingle Technology
The 180W OLP solar module (1x or 2x depending on the selection) with PERC technology used in the system is impressive on the one hand due to its unique module design with overlapping wafer arrangement (overlapping design), and on the other hand due to its high module efficiency, which makes this module particularly interesting for applications on vehicles due to the limited space available.
Module voltage (Vmp): 23,4V
Max. Current (Imp): 7.69A
Idle voltage (Voc): 27.61V
Short-circuit current (Isc): 8.15A
cell efficiency: 22,68%
ambient temperature: -40°C - +85°C
Temperature coefficient power: -0.43%/°C
Temperature coefficient voltage: -0.34 %/°C
Temperature coefficient current: -0.05 %/°C
Weight: 10.42KG
Dimensions: 1435mm x 670mm x 35mm
Protection class junction box: IP68 (waterproof)
Length of pre-assembled connection cables: 55cm
Pre-assembled connectors: MC4 compatible connectors
The professional solar mounting system
Spoiler profiles are the first choice especially for caravans and motorhomes when it comes to neatly mounting the solar modules. If you mount the modules in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). Due to the closed construction of the spoilers, no branches or similar can get caught under the solar modules.
Dimensions spoiler: L x W x H: 68cm x 8.9cm (of which approx. 3cm support surface module per spoiler) x 6.5cm.
The gluing
A properly executed gluing is superior to any screw connection in the hard use of campers or boats. On painted or GRP surfaces, a strength of more than 4 N/mm2 can be achieved, which would be a value calculated on the glued surface that could never be achieved with a screw connection in the thin aluminium or GRP support layer. This adhesive set enables even a layman to create an absolutely firm connection between spoilers and the respective substrate.
The Dekalin adhesive set contains all the components necessary for even the do-it-yourself installer to create a professional connection. Stainless steel screws for fastening the solar modules are included, as are detailed bonding instructions. In addition, all you need is a standard hand lever press for cartridges and a lint-free cloth.
The ABS mounting profiles
Cable penetrations from the roof into the interior are always quite tricky, as it must be ensured that everything is absolutely tight and remains tight even after years.
After all, even the slightest ingress of water can lead to often irreparable damage to the interior insulation and furnishings. Especially since the dampness is often only noticed quite late. This is why the roof penetrations were developed: The housings are made of the same UV- and weather-resistant material as the mounting brackets offered in the online shop. They are extremely stable and absolutely slip-proof. The wide adhesive edge ensures an optimal seal. The bushings are glued with the adhesive set that you also use to glue on the solar mounting brackets. The enclosures can also be painted to match the surface on which they are to be mounted.
The professional cabling set
All necessary cables are supplied plug & play and are already pre-crimped with specialist tools. So you don't need to buy special pliers for the MC-4 connectors.
Individual system customisation possible on request
We strive to implement every wish of our customers in the best possible way. With the individual requirements of a solar system, this is of course not always 100% possible. Therefore, if you would like to have adjustments made to one of our systems, simply send us an e-mail to [email protected] - just tell us briefly which system your enquiry relates to, what change you would like (e.g. additional module, colour spoiler, adhesive or bushing, different charge controller, etc.) and you will receive an appropriate offer from our sales team as soon as possible.
Scope of delivery:
1x Offgridtec 4-01-014245-001 Offgridtec® MobileBlack XL 180W 12V MPPT Caravan Solar Power System
or
1x Offgridtec 4-01-014245-002 Offgridtec® MobileBlack XL 360W 12V MPPT Caravan Solar Power System
The Offgridtec® MobileBlack series impresses with its appealing visual design in elegant black and its extremely convincing performance parameters...
Product is expected to be back in stock on 10 May 2024
Product is expected to be back in stock on 10 May 2024
VAT-exempt delivery possible*
Preorder 10.05.2024
The Offgridtec® MobileBlack series impresses with its appealing visual design in elegant black and its extremely convincing performance parameters. Starting with the OLP solar modules in state-of-the-art shingle design and an outstanding cell efficiency of over 22,68%, through to the Offgridtec® MPPT Pro dual charge controller, one can truly speak of a successful selection and product composition from Offgridtec.
MobileBlack XL Caravan Complete System
This complete system contains everything you need to charge your batteries on the move. In addition to charging your on-board battery, the dual regulator included in the set also allows you to charge the starter battery at the same time, as it has a corresponding secondary charging output. The scope of delivery includes extensive information material in which the assembly and connection are explained step by step - this applies to both the technical connection and the bonding of the retaining spoiler and the roof grommet. The roof duct is probably one of the most critical points, as this is where the transition to the interior of the camper takes place. The grommet is made of the same material as the spoiler - the PEG screw connection complies with protection class IP68 and is therefore absolutely waterproof when installed correctly.
Scope of delivery of the MobileBlack XL caravan solar system
Offgridtec® OLP solar module 180W V2 with shingle technology PERC (1x or 2x depending on choice)
1x Offgridtec® 30A MPPT dual solar charge controller with auxiliary charge and AES switching Output
1x remote display for MPPT Pro Duo charge Controller
1x Offgridtec ABS cable gland 1-way - black with waterproof PEG Gland
Offgridtec 68cm ABS mounting profiles (1 pair) - for mounting the solar modules in black (1x or 2x depending on choice)
1x Offgridtec 8m 2x6mm H07RNF - connection cable solar module to solar charge controller in caravan Version
1x Offgridtec 1.5m 10mm² battery connection cable with MIDI fuse holder - connection cable solar charge controller to battery with battery terminals and M8 cable lug Connection
1x Dekalin adhesive set with Dekasyl MS-5 polymer adhesive, Dekavator bonding agent, cleaning cloth and operating instructions
40A MIDI fuse
additional for 2 modules: 1x Offgridtec MC4 branching socket & 1x Dekalin Dekasyl MS-5 polymer adhesive
The Offgridtec® MPPT Pro Duo 30A Solar Charge Controller
The MPPT Pro Duo controller can handle a maximum charge current of 30A. This means that this system can theoretically be expanded to almost 400W solar module output - however, taking into account the module selection (expansion only with identical panels), an expansion by a maximum of 1 module would probably make the most sense with this system. In addition, the unit has a secondary charging output that can be used to charge the starter battery in parallel with the on-board battery during longer periods of standing - a feature that is certainly much appreciated in the mobile home. To ensure optimum efficiency, the unit also has an AES switching output - this enables refrigerators with "AES" to be switched automatically from gas to 12 V operation in the event of surplus solar power.
maximum charging current 30A - 390W module power theoretically usable
30A load output for 12V consumers directly at the charge Controller
the clear remote display allows the controller to be mounted in hard-to-reach places in the vehicle without restricting operation and overview of the system Parameters
AES control signal for car refrigerator to avoid energy waste
100V maximum PV input voltage
Digital circuit control of adaptive three-stage charging mode to improve battery life
Max power point tracking technology with ultra-fast tracking speed and guaranteed tracking efficiency of at least 99.5%.
Dimensions: 24.7cm x 16.5cm x 6.9cm (LxWxH)
Weight: 1.4KG
Power consumption: 26mA at 12V
Active temperature equalisation for optimal charging and ensuring long battery life
Supports all major battery types (lead acid, AGM, GEL, LiFePo4)
Max. Efficiency: 98
The 180W OLP solar module with the latest shingle Technology
The 180W OLP solar module (1x or 2x depending on the selection) with PERC technology used in the system is impressive on the one hand due to its unique module design with overlapping wafer arrangement (overlapping design), and on the other hand due to its high module efficiency, which makes this module particularly interesting for applications on vehicles due to the limited space available.
Module voltage (Vmp): 23,4V
Max. Current (Imp): 7.69A
Idle voltage (Voc): 27.61V
Short-circuit current (Isc): 8.15A
cell efficiency: 22,68%
ambient temperature: -40°C - +85°C
Temperature coefficient power: -0.43%/°C
Temperature coefficient voltage: -0.34 %/°C
Temperature coefficient current: -0.05 %/°C
Weight: 10.42KG
Dimensions: 1435mm x 670mm x 35mm
Protection class junction box: IP68 (waterproof)
Length of pre-assembled connection cables: 55cm
Pre-assembled connectors: MC4 compatible connectors
The professional solar mounting system
Spoiler profiles are the first choice especially for caravans and motorhomes when it comes to neatly mounting the solar modules. If you mount the modules in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). Due to the closed construction of the spoilers, no branches or similar can get caught under the solar modules.
Dimensions spoiler: L x W x H: 68cm x 8.9cm (of which approx. 3cm support surface module per spoiler) x 6.5cm.
The gluing
A properly executed gluing is superior to any screw connection in the hard use of campers or boats. On painted or GRP surfaces, a strength of more than 4 N/mm2 can be achieved, which would be a value calculated on the glued surface that could never be achieved with a screw connection in the thin aluminium or GRP support layer. This adhesive set enables even a layman to create an absolutely firm connection between spoilers and the respective substrate.
The Dekalin adhesive set contains all the components necessary for even the do-it-yourself installer to create a professional connection. Stainless steel screws for fastening the solar modules are included, as are detailed bonding instructions. In addition, all you need is a standard hand lever press for cartridges and a lint-free cloth.
The ABS mounting profiles
Cable penetrations from the roof into the interior are always quite tricky, as it must be ensured that everything is absolutely tight and remains tight even after years.
After all, even the slightest ingress of water can lead to often irreparable damage to the interior insulation and furnishings. Especially since the dampness is often only noticed quite late. This is why the roof penetrations were developed: The housings are made of the same UV- and weather-resistant material as the mounting brackets offered in the online shop. They are extremely stable and absolutely slip-proof. The wide adhesive edge ensures an optimal seal. The bushings are glued with the adhesive set that you also use to glue on the solar mounting brackets. The enclosures can also be painted to match the surface on which they are to be mounted.
The professional cabling set
All necessary cables are supplied plug & play and are already pre-crimped with specialist tools. So you don't need to buy special pliers for the MC-4 connectors.
Individual system customisation possible on request
We strive to implement every wish of our customers in the best possible way. With the individual requirements of a solar system, this is of course not always 100% possible. Therefore, if you would like to have adjustments made to one of our systems, simply send us an e-mail to [email protected] - just tell us briefly which system your enquiry relates to, what change you would like (e.g. additional module, colour spoiler, adhesive or bushing, different charge controller, etc.) and you will receive an appropriate offer from our sales team as soon as possible.
Scope of delivery:
1x Offgridtec 4-01-014245-001 Offgridtec® MobileBlack XL 180W 12V MPPT Caravan Solar Power System
or
1x Offgridtec 4-01-014245-002 Offgridtec® MobileBlack XL 360W 12V MPPT Caravan Solar Power System
Product is expected to be back in stock on 10 May 2024
More versions available
VAT-exempt delivery possible*
Preorder 13.05.2024
4-01-012878
Offgridtec® MobileBlack l 300w camper Solaranlage 30a mppt duo charge controller OlP perc solar panel
The Offgridtec® Mobileblack series impresses with an appealing optical design in elegant black and with its extremely convincing performance parameters. Starting with the olp solar modules in the most modern shingle design and an outstanding cell efficiency of over 22%, up to the Offgridtec® mppt Pro dual charge controller, one can really speak here of a successful selection and product composition from the house Offgridtec.
300W Mobileblack Caravan Complete System
This complete system contains everything you need to charge your mobile batteries. The dual controller included in the set allows you to charge your on-board battery and at the same time charge the starter battery, because it has a corresponding secondary charging output. The scope of delivery includes extensive information material, in which the assembly and connection are explained step by step - this applies to both the technical connection, as well as the bonding of the retaining spoiler and the roof gland. The grommet is made of the same material as the spoilers - the peg screw connection complies with protection class ip68 and is therefore absolutely watertight when installed correctly.
scope of delivery of the Mobileblack l 300W Caravan Solaranlage
2x Offgridtec® olp solar panel 150w V2 perc with shingle technology - 018480
1x Offgridtec abs cable gland 1-way - black with waterproof peg gland
2x Offgridtec 68cm abs mounting profiles (1pair) - for mounting the solar modules in black
1x Offgridtec 8m 2x6mm h07rnf - connecting cable solar module to solar charge controller in caravan design
1x Offgridtec 1,5m 10mm² battery connection cable with MIDI fuse holder and 40a MIDI fuse - connection cable solar charge controller to battery with battery terminals and m8 cable lug connection
1x Offgridtec® 30a mppt dual solar charge controller with auxiliary charge and aes switching output
1x remote display for mppt Pro Duo charge controller
1x Dekalin adhesive set with Dekasyl ms-5 polymer adhesive, Dekavator bonding agent, cleaning cloth and operating instructions
1x pair of solar connector junction boxes for parallel connection of the two solar modules
2x solar connector extension cable 50cm to connect a connection cable located on the module with the module connection cable
1x battery pole terminal set
1x MIDI fuse 40A 58V
The Offgridtec® mppt Pro Duo 30a solar charge controller
The mppt Pro Duo controller can handle a maximum charge current of 30a. In addition, the device has a secondary charge output through which the starter battery can be charged in parallel to the on-board battery during longer periods of standstill - a feature which is certainly very appreciated in the mobile home. So that in terms of efficiency can really be spoken of the optimum, the device also has an aes switching output - this allows in excess solar power, the automatic switching of refrigerators with "aes" from gas to 12v operation.
maximum charging current 30a
30a load output for 12v consumers directly on the charge controller
the clearly arranged remote display allows the controller to be mounted in hard-to-reach places in the vehicle without restricting the operation and overview of the system parameters
aes control signal for car refrigerator to avoid energy waste
100V maximum pv input voltage
Digital circuit control of adaptive three-stage charging mode to improve battery life
Max power point tracking technology with ultra-fast tracking speed and a guaranteed tracking efficiency of at least 99.5%
Dimensions: 24.7cm x 16.5cm x 6.9cm (lxwxh)
Weight: 1.4KG
Power consumption: 26mA at 12v
Active temperature equalization for optimal charging and ensuring long battery life
Support of all major battery types (lead acid, agm, gel, liFePo4)
Max. Efficiency: 98%
The 150w V2 olp solar panel with the latest shingle technology
The 150w V2 olp solar module with perc technology used in the system impresses on the one hand with its unique module design with overlapping wafer arrangement (overlapping design), and on the other hand with its high module efficiency, which makes this module particularly interesting for applications on vehicles due to the limited space available.
Module voltage (Vmp): 19.4V
Max. Current (Imp): 7.74A
open circuit voltage (Voc): 22.90V
Short circuit current (Isc): 8.20A
Cell efficiency: >22%
Ambient temperature: -40°C - +85°C
Weight: 9,8KG
Dimensions: 670 x 1195 x 35mm
Protection class junction box: ip68 (waterproof)
The professional solar mounting system
Spoile profiles are the first choice especially for caravans and motorhomes when it comes to a clean mounting of the solar modules. If you mount the modules in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). Due to the closed construction of the spoiler, no branches or similar can get caught under the solar modules.
Dimensions spoiler: l x w x h: 68cm x 8.9cm (of which approx. 3cm bearing surface module per spoiler) x 6.5cm.
The bonding
A properly executed bonding is superior to any screw connection in the hard use of motorhomes or boats. On painted or GRP surfaces, a strength of over 4 N/mm2 can be achieved. This would be a value calculated on the glued surface that could never be achieved with a screw connection in the thin aluminum or GRP support layer. This adhesive set allows even a layman to create an absolutely firm connection between spoilers and the respective substrate.
The Dekalin gluing set contains all the components necessary for even the do-it-yourself installer to create a professional connection. Stainless steel screws for fastening the solar modules are included as well as detailed bonding instructions. In addition, all you need is a standard hand lever press for cartridges and a lint-free cloth.
The abs mounting profiles
Cable penetrations from the roof into the interior are always quite tricky, since it must be ensured that even after years everything is absolutely tight and also remains tight.
This is because even the slightest water ingress can lead to often irreparable damage to the interior insulation and furnishings. especially since the moisture is often not noticed until quite late. For this reason, the roof penetrations were developed: The housings are made of the same uv- and weather-resistant material as the mounting brackets offered in the online store. They are extremely stable and absolutely slip-proof. The wide adhesive edge ensures an optimal seal. The bushings are glued with the adhesive set that you also use to glue on the solar mounting brackets. The housings can also be painted as desired and thus adapted to the substrate on which they are to be mounted
The professional cabling set
All necessary cables are delivered plug & play and are already pre-crimped with professional tools. So you don't need to buy special pliers for the solar connectors.
Individual system adaptation possible on request
We strive to implement every wish of our customers in the best possible way. With the individual requirements of a Solarasystem, this is of course not always 100% possible. Therefore, if you need any customization on one of our systems just send us a mail to [email protected] - simply tell us briefly which system your request refers to, which modification you would like (e.g. additional module, color spoiler, adhesive or bushing, other charge controller, etc.) and you will receive an appropriate offer from our sales team as soon as possible. Any costs are to be inquired at the customer service.
scope of delivery:
1x Offgridtec 4-01-012878 Offgridtec® Mobileblack l 300W 12v mppt Caravan Solaranlage
The Offgridtec® Mobileblack series impresses with an appealing optical design in elegant black and with its extremely convincing performance param...
Product is expected to be back in stock on 13 May 2024
Product is expected to be back in stock on 13 May 2024
VAT-exempt delivery possible*
Preorder 13.05.2024
The Offgridtec® Mobileblack series impresses with an appealing optical design in elegant black and with its extremely convincing performance parameters. Starting with the olp solar modules in the most modern shingle design and an outstanding cell efficiency of over 22%, up to the Offgridtec® mppt Pro dual charge controller, one can really speak here of a successful selection and product composition from the house Offgridtec.
300W Mobileblack Caravan Complete System
This complete system contains everything you need to charge your mobile batteries. The dual controller included in the set allows you to charge your on-board battery and at the same time charge the starter battery, because it has a corresponding secondary charging output. The scope of delivery includes extensive information material, in which the assembly and connection are explained step by step - this applies to both the technical connection, as well as the bonding of the retaining spoiler and the roof gland. The grommet is made of the same material as the spoilers - the peg screw connection complies with protection class ip68 and is therefore absolutely watertight when installed correctly.
scope of delivery of the Mobileblack l 300W Caravan Solaranlage
2x Offgridtec® olp solar panel 150w V2 perc with shingle technology - 018480
1x Offgridtec abs cable gland 1-way - black with waterproof peg gland
2x Offgridtec 68cm abs mounting profiles (1pair) - for mounting the solar modules in black
1x Offgridtec 8m 2x6mm h07rnf - connecting cable solar module to solar charge controller in caravan design
1x Offgridtec 1,5m 10mm² battery connection cable with MIDI fuse holder and 40a MIDI fuse - connection cable solar charge controller to battery with battery terminals and m8 cable lug connection
1x Offgridtec® 30a mppt dual solar charge controller with auxiliary charge and aes switching output
1x remote display for mppt Pro Duo charge controller
1x Dekalin adhesive set with Dekasyl ms-5 polymer adhesive, Dekavator bonding agent, cleaning cloth and operating instructions
1x pair of solar connector junction boxes for parallel connection of the two solar modules
2x solar connector extension cable 50cm to connect a connection cable located on the module with the module connection cable
1x battery pole terminal set
1x MIDI fuse 40A 58V
The Offgridtec® mppt Pro Duo 30a solar charge controller
The mppt Pro Duo controller can handle a maximum charge current of 30a. In addition, the device has a secondary charge output through which the starter battery can be charged in parallel to the on-board battery during longer periods of standstill - a feature which is certainly very appreciated in the mobile home. So that in terms of efficiency can really be spoken of the optimum, the device also has an aes switching output - this allows in excess solar power, the automatic switching of refrigerators with "aes" from gas to 12v operation.
maximum charging current 30a
30a load output for 12v consumers directly on the charge controller
the clearly arranged remote display allows the controller to be mounted in hard-to-reach places in the vehicle without restricting the operation and overview of the system parameters
aes control signal for car refrigerator to avoid energy waste
100V maximum pv input voltage
Digital circuit control of adaptive three-stage charging mode to improve battery life
Max power point tracking technology with ultra-fast tracking speed and a guaranteed tracking efficiency of at least 99.5%
Dimensions: 24.7cm x 16.5cm x 6.9cm (lxwxh)
Weight: 1.4KG
Power consumption: 26mA at 12v
Active temperature equalization for optimal charging and ensuring long battery life
Support of all major battery types (lead acid, agm, gel, liFePo4)
Max. Efficiency: 98%
The 150w V2 olp solar panel with the latest shingle technology
The 150w V2 olp solar module with perc technology used in the system impresses on the one hand with its unique module design with overlapping wafer arrangement (overlapping design), and on the other hand with its high module efficiency, which makes this module particularly interesting for applications on vehicles due to the limited space available.
Module voltage (Vmp): 19.4V
Max. Current (Imp): 7.74A
open circuit voltage (Voc): 22.90V
Short circuit current (Isc): 8.20A
Cell efficiency: >22%
Ambient temperature: -40°C - +85°C
Weight: 9,8KG
Dimensions: 670 x 1195 x 35mm
Protection class junction box: ip68 (waterproof)
The professional solar mounting system
Spoile profiles are the first choice especially for caravans and motorhomes when it comes to a clean mounting of the solar modules. If you mount the modules in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). Due to the closed construction of the spoiler, no branches or similar can get caught under the solar modules.
Dimensions spoiler: l x w x h: 68cm x 8.9cm (of which approx. 3cm bearing surface module per spoiler) x 6.5cm.
The bonding
A properly executed bonding is superior to any screw connection in the hard use of motorhomes or boats. On painted or GRP surfaces, a strength of over 4 N/mm2 can be achieved. This would be a value calculated on the glued surface that could never be achieved with a screw connection in the thin aluminum or GRP support layer. This adhesive set allows even a layman to create an absolutely firm connection between spoilers and the respective substrate.
The Dekalin gluing set contains all the components necessary for even the do-it-yourself installer to create a professional connection. Stainless steel screws for fastening the solar modules are included as well as detailed bonding instructions. In addition, all you need is a standard hand lever press for cartridges and a lint-free cloth.
The abs mounting profiles
Cable penetrations from the roof into the interior are always quite tricky, since it must be ensured that even after years everything is absolutely tight and also remains tight.
This is because even the slightest water ingress can lead to often irreparable damage to the interior insulation and furnishings. especially since the moisture is often not noticed until quite late. For this reason, the roof penetrations were developed: The housings are made of the same uv- and weather-resistant material as the mounting brackets offered in the online store. They are extremely stable and absolutely slip-proof. The wide adhesive edge ensures an optimal seal. The bushings are glued with the adhesive set that you also use to glue on the solar mounting brackets. The housings can also be painted as desired and thus adapted to the substrate on which they are to be mounted
The professional cabling set
All necessary cables are delivered plug & play and are already pre-crimped with professional tools. So you don't need to buy special pliers for the solar connectors.
Individual system adaptation possible on request
We strive to implement every wish of our customers in the best possible way. With the individual requirements of a Solarasystem, this is of course not always 100% possible. Therefore, if you need any customization on one of our systems just send us a mail to [email protected] - simply tell us briefly which system your request refers to, which modification you would like (e.g. additional module, color spoiler, adhesive or bushing, other charge controller, etc.) and you will receive an appropriate offer from our sales team as soon as possible. Any costs are to be inquired at the customer service.
scope of delivery:
1x Offgridtec 4-01-012878 Offgridtec® Mobileblack l 300W 12v mppt Caravan Solaranlage
Product is expected to be back in stock on 13 May 2024
VAT-exempt delivery possible*
4-01-012876
Offgridtec® mobileBlack m 200w camper Solaranlage 30a mPPT duo charge controller olp perc solar module
The Offgridtec® mobileblack series impresses with an appealing optical design in noble black and with its extremely convincing performance parameters. Starting with the olp solar modules in the most modern shingle design and an outstanding cell efficiency of over 22%, up to the Offgridtec® mppt Pro dual charge controller, one can really speak here of a successful selection and product composition from the house Offgridtec.
200w mobileblack m caravan complete system
This complete system contains everything you need to charge your batteries mobile. The dual controller included in the set allows you to charge your on-board battery and at the same time charge the starter battery, because it has a corresponding secondary charging output. The scope of delivery includes extensive information material, in which the assembly and connection are explained step by step - this concerns both the technical connection, as well as the bonding of the retaining spoilers and the roof duct. The grommet is made of the same material as the spoilers - the peg screw connection complies with protection class ip68 and is therefore absolutely watertight when installed correctly.
scope of delivery of the mobileblack m 200w caravan Solaranlage
2x Offgridtec® olp solar panel 100w V2 perc with shingle technology -018475
1x Offgridtec abs cable gland 1-way - black with waterproof peg gland
2x Offgridtec© ABS Corner Profile Set Heavy Duty Black 150x150mm
1x Offgridtec 8m 2x6mm h07rnf - connecting cable solar module to solar charge controller in caravan design
1x Offgridtec 1,5m 10mm² battery connection cable with mIDI fuse holder and 40a mIDI fuse - connection cable solar charge controller to battery with battery pole terminals and m8 cable lug connection
1x Offgridtec® 30a mppt dual solar charge controller with auxiliary charge and aes switching output
1x remote display for mppt Pro Duo charge controller
1x Dekalin adhesive set with Dekasyl mS-5 polymer adhesive, Dekavator bonding agent, cleaning cloth and operating instructions
1x single cartridge of Dekasyl mS-5 adhesive from Dekalin
1x junction boxes for parallel connection of solar modules
2x solar connector extension cable 50cm to connect the connection cables on the module with the junction boxes
The Offgridtec® mppt Pro Duo 30a solar charge controller
The mppt Pro Duo controller can handle a maximum charge current of 30a. This means that this system is theoretically expandable to nearly 400w of solar module power. In addition, the device has a secondary charge output via which the starter battery can be charged in parallel to the on-board battery during longer periods of standstill - a feature that is certainly very appreciated in the mobile home. So that in terms of efficiency can really be spoken of the optimum, the device also has an aes switching output - this allows in excess solar power, the automatic switching of refrigerators with "aes" from gas to 12v operation.
maximum charging current 30a - 390w module power theoretically usable
30a load output for 12v consumers directly on the charge controller
the clear remote display allows the controller to be mounted in hard-to-reach places in the vehicle without limiting the operation and overview of the system parameters
aes control signal for car refrigerator to avoid energy waste
100V maximum pv input voltage
Digital circuit control of adaptive three-stage charging mode to improve battery life
max power point tracking technology with ultra-fast tracking speed and a guaranteed tracking efficiency of at least 99.5%
Dimensions: 24.7cm x 16.5cm x 6.9cm (lxwxh)
Weight: 1.4KG
Power consumption: 26mA at 12v
Active temperature equalization for optimal charging and ensuring long battery life
Support of all major battery types (lead acid, AGm, gel, liFePo4)
max. efficiency: 98
The 100w V2 olp solar panel with latest shingle technology
The 100w V2 olp solar module with perc technology used in the system impresses on the one hand with its unique module design with overlapping wafer arrangement (overlapping design), and on the other hand with its high module efficiency, which makes this module particularly interesting for applications on vehicles due to the limited space available.
module voltage (Vmp): 19.4V
max. current (Imp): 5.16A
open circuit voltage (Voc): 22,90V
Short circuit current (Isc): 5.46A
Cell efficiency: >22%
Ambient temperature: -40°C - +85°C
Temperature coefficient power: -0.43%/°C
Temperature coefficient voltage: -0.34 %/°C
Temperature coefficient current: -0.05 %/°C
Weight: 6,28KG
Dimensions: 450 x 1195 x 35mm
Protection class junction box: ip68 (waterproof)
The Professional Solar Mounting System
Our ABS corner plastic profiles for space-saving installation provide a sturdy attachment for solar modules with a maximum power of 150W. Larger modules should be additionally supported on the longitudinal sides with our 180mm connecting profiles to prevent sagging of the module frame. This set is the Heavy Duty version, which is considerably more stable compared to the Light Duty version, and the corners can also be climbed if necessary.
For adhesive, we recommend Sika 252 automotive adhesive or Dekalin adhesive (not included). Both types are available from us in black.
Features of the 150mm x 150mm Solar Corner Profiles in Black:
• Space requirement per corner bracket: 150mm x 150mm
• Manufacturer: Offgridtec
• Part number: 010860
• Material: ABS
• Finish: polished
• Color: black
• Weight (Set): 0.498 kilograms"
The professional cabling set
All necessary cables are delivered plug & play and are already pre-crimped with professional tools. So you don't need to buy special pliers for the solar connectors.
Individual system adaptation possible on request
We strive to implement every wish of our customers in the best possible way. With the individual requirements of a Solarasystem, this is of course not always 100% possible. Therefore, if you need any customization on one of our systems just send us an email to [email protected] - just tell us briefly which system your request refers to, which modification you would like to have (e.g. additional module, color spoiler, adhesive or bushing, other charge controller, etc.) and you will receive a corresponding offer from our sales team as soon as possible. Any costs are to be inquired at the customer service.
scope of delivery:
1x Offgridtec 4-01-012876 Offgridtec® mobileblack m 200w 12v mppt caravan Solaranlage
The Offgridtec® mobileblack series impresses with an appealing optical design in noble black and with its extremely convincing performance paramet...
Soon available again
Soon available again
VAT-exempt delivery possible*
The Offgridtec® mobileblack series impresses with an appealing optical design in noble black and with its extremely convincing performance parameters. Starting with the olp solar modules in the most modern shingle design and an outstanding cell efficiency of over 22%, up to the Offgridtec® mppt Pro dual charge controller, one can really speak here of a successful selection and product composition from the house Offgridtec.
200w mobileblack m caravan complete system
This complete system contains everything you need to charge your batteries mobile. The dual controller included in the set allows you to charge your on-board battery and at the same time charge the starter battery, because it has a corresponding secondary charging output. The scope of delivery includes extensive information material, in which the assembly and connection are explained step by step - this concerns both the technical connection, as well as the bonding of the retaining spoilers and the roof duct. The grommet is made of the same material as the spoilers - the peg screw connection complies with protection class ip68 and is therefore absolutely watertight when installed correctly.
scope of delivery of the mobileblack m 200w caravan Solaranlage
2x Offgridtec® olp solar panel 100w V2 perc with shingle technology -018475
1x Offgridtec abs cable gland 1-way - black with waterproof peg gland
2x Offgridtec© ABS Corner Profile Set Heavy Duty Black 150x150mm
1x Offgridtec 8m 2x6mm h07rnf - connecting cable solar module to solar charge controller in caravan design
1x Offgridtec 1,5m 10mm² battery connection cable with mIDI fuse holder and 40a mIDI fuse - connection cable solar charge controller to battery with battery pole terminals and m8 cable lug connection
1x Offgridtec® 30a mppt dual solar charge controller with auxiliary charge and aes switching output
1x remote display for mppt Pro Duo charge controller
1x Dekalin adhesive set with Dekasyl mS-5 polymer adhesive, Dekavator bonding agent, cleaning cloth and operating instructions
1x single cartridge of Dekasyl mS-5 adhesive from Dekalin
1x junction boxes for parallel connection of solar modules
2x solar connector extension cable 50cm to connect the connection cables on the module with the junction boxes
The Offgridtec® mppt Pro Duo 30a solar charge controller
The mppt Pro Duo controller can handle a maximum charge current of 30a. This means that this system is theoretically expandable to nearly 400w of solar module power. In addition, the device has a secondary charge output via which the starter battery can be charged in parallel to the on-board battery during longer periods of standstill - a feature that is certainly very appreciated in the mobile home. So that in terms of efficiency can really be spoken of the optimum, the device also has an aes switching output - this allows in excess solar power, the automatic switching of refrigerators with "aes" from gas to 12v operation.
maximum charging current 30a - 390w module power theoretically usable
30a load output for 12v consumers directly on the charge controller
the clear remote display allows the controller to be mounted in hard-to-reach places in the vehicle without limiting the operation and overview of the system parameters
aes control signal for car refrigerator to avoid energy waste
100V maximum pv input voltage
Digital circuit control of adaptive three-stage charging mode to improve battery life
max power point tracking technology with ultra-fast tracking speed and a guaranteed tracking efficiency of at least 99.5%
Dimensions: 24.7cm x 16.5cm x 6.9cm (lxwxh)
Weight: 1.4KG
Power consumption: 26mA at 12v
Active temperature equalization for optimal charging and ensuring long battery life
Support of all major battery types (lead acid, AGm, gel, liFePo4)
max. efficiency: 98
The 100w V2 olp solar panel with latest shingle technology
The 100w V2 olp solar module with perc technology used in the system impresses on the one hand with its unique module design with overlapping wafer arrangement (overlapping design), and on the other hand with its high module efficiency, which makes this module particularly interesting for applications on vehicles due to the limited space available.
module voltage (Vmp): 19.4V
max. current (Imp): 5.16A
open circuit voltage (Voc): 22,90V
Short circuit current (Isc): 5.46A
Cell efficiency: >22%
Ambient temperature: -40°C - +85°C
Temperature coefficient power: -0.43%/°C
Temperature coefficient voltage: -0.34 %/°C
Temperature coefficient current: -0.05 %/°C
Weight: 6,28KG
Dimensions: 450 x 1195 x 35mm
Protection class junction box: ip68 (waterproof)
The Professional Solar Mounting System
Our ABS corner plastic profiles for space-saving installation provide a sturdy attachment for solar modules with a maximum power of 150W. Larger modules should be additionally supported on the longitudinal sides with our 180mm connecting profiles to prevent sagging of the module frame. This set is the Heavy Duty version, which is considerably more stable compared to the Light Duty version, and the corners can also be climbed if necessary.
For adhesive, we recommend Sika 252 automotive adhesive or Dekalin adhesive (not included). Both types are available from us in black.
Features of the 150mm x 150mm Solar Corner Profiles in Black:
• Space requirement per corner bracket: 150mm x 150mm
• Manufacturer: Offgridtec
• Part number: 010860
• Material: ABS
• Finish: polished
• Color: black
• Weight (Set): 0.498 kilograms"
The professional cabling set
All necessary cables are delivered plug & play and are already pre-crimped with professional tools. So you don't need to buy special pliers for the solar connectors.
Individual system adaptation possible on request
We strive to implement every wish of our customers in the best possible way. With the individual requirements of a Solarasystem, this is of course not always 100% possible. Therefore, if you need any customization on one of our systems just send us an email to [email protected] - just tell us briefly which system your request refers to, which modification you would like to have (e.g. additional module, color spoiler, adhesive or bushing, other charge controller, etc.) and you will receive a corresponding offer from our sales team as soon as possible. Any costs are to be inquired at the customer service.
scope of delivery:
1x Offgridtec 4-01-012876 Offgridtec® mobileblack m 200w 12v mppt caravan Solaranlage
Soon available again
VAT-exempt delivery possible*
4-01-012875
Offgridtec® mobileBlack m 100w motorhome solar system 30a mPPT duo charge controller olp perc solar module
The Offgridtec® mobileblack series impresses with an appealing optical design in noble black and with its extremely convincing performance parameters. Starting with the olp solar modules in the latest shingle design and an outstanding cell efficiency of over 22%, up to the Offgridtec® mppt Pro dual charge controller, one can really speak of a successful selection and product composition from Offgridtec.
100w mobileblack m caravan complete system
This complete system contains everything you need to charge your batteries mobile. The dual controller included in the set allows you to charge your on-board battery and at the same time charge the starter battery, because it has a corresponding secondary charging output. The scope of delivery includes extensive information material, in which the assembly and connection are explained step by step - this concerns both the technical connection and the bonding of the retaining spoilers and the roof duct. The grommet is made of the same material as the spoilers - the peg screw connection complies with protection class ip68 and is therefore absolutely watertight when installed correctly.
scope of delivery of the mobileblack m 100w caravan solar system
1x Offgridtec® olp solar panel 100w V2 perc with shingle technology - 018475
1x Offgridtec abs cable gland 1-way - black with waterproof peg gland
1x Offgridtec© ABS Corner Profile Set Heavy Duty Black 150x150mm
1x Offgridtec 8m 2x6mm h07rnf - connection cable solar module to solar charge controller in caravan design
1x Offgridtec 1,5m 10mm² battery connection cable with mIDI fuse holder and 40a mIDI fuse - connection cable solar charge controller to battery with battery pole terminals and m8 cable lug connection
1x Offgridtec® 30a mppt dual solar charge controller with auxiliary charge and aes switching output
1x remote display for mppt Pro Duo charge controller
1x Dekalin adhesive set with Dekasyl mS-5 polymer adhesive, Dekavator bonding agent, cleaning cloth and operating instructions
1x mC-4 extension cable 50cm to connect a connection cable located at the module with the module connection cable
The Offgridtec® mppt Pro Duo 30a solar charge controller
The mppt Pro Duo controller can handle a maximum charge current of 30a. This means that this system is theoretically expandable to nearly 400w of solar module power. In addition, the device has a secondary charge output via which the starter battery can be charged in parallel to the on-board battery during longer periods of standstill - a feature that is certainly very appreciated in the mobile home. So that in terms of efficiency can really be spoken of the optimum, the device also has an aes switching output - this allows in excess solar power, the automatic switching of refrigerators with "aes" from gas to 12v operation.
maximum charging current 30a - 390w module power theoretically usable
30a load output for 12v loads directly on the charge controller
the clear remote display allows the regulator to be mounted in hard-to-reach places in the vehicle without limiting the operation and overview of the system parameters
aes control signal for car refrigerator to avoid energy waste
100V maximum pv input voltage
Digital circuit control of adaptive three-stage charging mode to improve battery life
max power point tracking technology with ultra-fast tracking speed and guaranteed tracking efficiency of 99.5% minimum
Dimensions: 24.7cm x 16.5cm x 6.9cm (lxwxh)
Weight: 1,4KG
Power consumption: 26mA at 12v
Active temperature equalization for optimal charging and ensuring long battery life
Supports all major battery types (lead acid, AGm, gel, liFePo4)
max. efficiency: 98
The 100w V2 olp solar panel with the latest shingle technology
The 100w V2 olp solar module with perc technology used in the system impresses on the one hand with its unique module design with overlapping wafer arrangement (overlapping design), and on the other hand with its high module efficiency, which makes this module particularly interesting for applications on vehicles due to the limited space available.
module voltage (Vmp): 19.4V
max. current (Imp): 5,16A
open circuit voltage (Voc): 22.90V
Short circuit current (Isc): 5.46A
Cell efficiency: >22%
Ambient temperature: -40°C - +85°C
Weight: 6,28KG
Dimensions: 450 x 1195 x 35mm
Protection class junction box: ip68 (waterproof)
pre-assembled connectors: mC4 compatible connectors
The Professional Solar Mounting System
Our ABS corner plastic profiles for space-saving installation provide a sturdy attachment for solar modules with a maximum power of 150W. Larger modules should be additionally supported on the longitudinal sides with our 180mm connecting profiles to prevent sagging of the module frame. This set is the Heavy Duty version, which is considerably more stable compared to the Light Duty version, and the corners can also be climbed if necessary.
For adhesive, we recommend Sika 252 automotive adhesive or Dekalin adhesive (not included). Both types are available from us in black.
Features of the 150mm x 150mm Solar Corner Profiles in Black:
• Space requirement per corner bracket: 150mm x 150mm
• Manufacturer: Offgridtec
• Part number: 010860
• Material: ABS
• Finish: polished
• Color: black
• Weight (Set): 0.498 kilograms"
The professional cabling set
All necessary cables are delivered plug and play and are already pre-crimped with professional tools. So you don't need to buy special pliers for the mC-4 connectors.
Individual system customization possible on request
We strive to implement every wish of our customers in the best possible way. With the individual requirements of a solar system, this is of course not always 100% possible. If you should therefore wish adaptations at one of our systems send us simply a mail to [email protected] - just tell us briefly which system your request refers to, which change you would like to have (e.g. additional module, color spoiler, adhesive or bushing, other charge controller, etc.) and you will receive an appropriate offer from our sales team as soon as possible.
scope of delivery:
1x Offgridtec 4-01-012875 Offgridtec® mobileblack m 100w 12v mppt caravan solar system
The Offgridtec® mobileblack series impresses with an appealing optical design in noble black and with its extremely convincing performance paramet...
Soon available again
Soon available again
VAT-exempt delivery possible*
The Offgridtec® mobileblack series impresses with an appealing optical design in noble black and with its extremely convincing performance parameters. Starting with the olp solar modules in the latest shingle design and an outstanding cell efficiency of over 22%, up to the Offgridtec® mppt Pro dual charge controller, one can really speak of a successful selection and product composition from Offgridtec.
100w mobileblack m caravan complete system
This complete system contains everything you need to charge your batteries mobile. The dual controller included in the set allows you to charge your on-board battery and at the same time charge the starter battery, because it has a corresponding secondary charging output. The scope of delivery includes extensive information material, in which the assembly and connection are explained step by step - this concerns both the technical connection and the bonding of the retaining spoilers and the roof duct. The grommet is made of the same material as the spoilers - the peg screw connection complies with protection class ip68 and is therefore absolutely watertight when installed correctly.
scope of delivery of the mobileblack m 100w caravan solar system
1x Offgridtec® olp solar panel 100w V2 perc with shingle technology - 018475
1x Offgridtec abs cable gland 1-way - black with waterproof peg gland
1x Offgridtec© ABS Corner Profile Set Heavy Duty Black 150x150mm
1x Offgridtec 8m 2x6mm h07rnf - connection cable solar module to solar charge controller in caravan design
1x Offgridtec 1,5m 10mm² battery connection cable with mIDI fuse holder and 40a mIDI fuse - connection cable solar charge controller to battery with battery pole terminals and m8 cable lug connection
1x Offgridtec® 30a mppt dual solar charge controller with auxiliary charge and aes switching output
1x remote display for mppt Pro Duo charge controller
1x Dekalin adhesive set with Dekasyl mS-5 polymer adhesive, Dekavator bonding agent, cleaning cloth and operating instructions
1x mC-4 extension cable 50cm to connect a connection cable located at the module with the module connection cable
The Offgridtec® mppt Pro Duo 30a solar charge controller
The mppt Pro Duo controller can handle a maximum charge current of 30a. This means that this system is theoretically expandable to nearly 400w of solar module power. In addition, the device has a secondary charge output via which the starter battery can be charged in parallel to the on-board battery during longer periods of standstill - a feature that is certainly very appreciated in the mobile home. So that in terms of efficiency can really be spoken of the optimum, the device also has an aes switching output - this allows in excess solar power, the automatic switching of refrigerators with "aes" from gas to 12v operation.
maximum charging current 30a - 390w module power theoretically usable
30a load output for 12v loads directly on the charge controller
the clear remote display allows the regulator to be mounted in hard-to-reach places in the vehicle without limiting the operation and overview of the system parameters
aes control signal for car refrigerator to avoid energy waste
100V maximum pv input voltage
Digital circuit control of adaptive three-stage charging mode to improve battery life
max power point tracking technology with ultra-fast tracking speed and guaranteed tracking efficiency of 99.5% minimum
Dimensions: 24.7cm x 16.5cm x 6.9cm (lxwxh)
Weight: 1,4KG
Power consumption: 26mA at 12v
Active temperature equalization for optimal charging and ensuring long battery life
Supports all major battery types (lead acid, AGm, gel, liFePo4)
max. efficiency: 98
The 100w V2 olp solar panel with the latest shingle technology
The 100w V2 olp solar module with perc technology used in the system impresses on the one hand with its unique module design with overlapping wafer arrangement (overlapping design), and on the other hand with its high module efficiency, which makes this module particularly interesting for applications on vehicles due to the limited space available.
module voltage (Vmp): 19.4V
max. current (Imp): 5,16A
open circuit voltage (Voc): 22.90V
Short circuit current (Isc): 5.46A
Cell efficiency: >22%
Ambient temperature: -40°C - +85°C
Weight: 6,28KG
Dimensions: 450 x 1195 x 35mm
Protection class junction box: ip68 (waterproof)
pre-assembled connectors: mC4 compatible connectors
The Professional Solar Mounting System
Our ABS corner plastic profiles for space-saving installation provide a sturdy attachment for solar modules with a maximum power of 150W. Larger modules should be additionally supported on the longitudinal sides with our 180mm connecting profiles to prevent sagging of the module frame. This set is the Heavy Duty version, which is considerably more stable compared to the Light Duty version, and the corners can also be climbed if necessary.
For adhesive, we recommend Sika 252 automotive adhesive or Dekalin adhesive (not included). Both types are available from us in black.
Features of the 150mm x 150mm Solar Corner Profiles in Black:
• Space requirement per corner bracket: 150mm x 150mm
• Manufacturer: Offgridtec
• Part number: 010860
• Material: ABS
• Finish: polished
• Color: black
• Weight (Set): 0.498 kilograms"
The professional cabling set
All necessary cables are delivered plug and play and are already pre-crimped with professional tools. So you don't need to buy special pliers for the mC-4 connectors.
Individual system customization possible on request
We strive to implement every wish of our customers in the best possible way. With the individual requirements of a solar system, this is of course not always 100% possible. If you should therefore wish adaptations at one of our systems send us simply a mail to [email protected] - just tell us briefly which system your request refers to, which change you would like to have (e.g. additional module, color spoiler, adhesive or bushing, other charge controller, etc.) and you will receive an appropriate offer from our sales team as soon as possible.
scope of delivery:
1x Offgridtec 4-01-012875 Offgridtec® mobileblack m 100w 12v mppt caravan solar system
Soon available again