The Offgridtec PSI 12-1500 (MPN 011090) is an advanced 12V 230V sine wave voltage converter of the latest generation. The unit features a 16Bit SPWM chipset, numerous protection mechanisms and galvanically isolated inputs and outputs. The input voltage range is 10.6 and 16Vdc. The converter can deliver 1500W for 15 minutes or 1200W continuously. For short inrush currents, the PSI 12-1500 delivers 2400W. Thanks to its advanced constitution, even sensitive electrical appliances can be supplied with power reliably and permanently Advanced development of the HP voltage transformer family The PSI series is the further development of the HP voltage transformers and comes up trumps with numerous innovations and optimisations: Input and output of the PSI are galvanically isolated and the housing has an earth connection. Mains frequency (50Hz/60Hz) and output voltage (220V / 230V) can be set via a dip switch. The brand-new SPWM 16-bit chipset delivers power of the highest quality and allows even very sensitive electronics to be reliably supplied with power. Compared to older chipsets, it is much more solid and durable. PSI converters with a power of 1000W or more are also equipped with an RS485 data output. This allows you to configure numerous parameters and monitor the operation of the unit via a computer / notebook using the PSI software. (the required interface cable is included in the scope of delivery). Configuration The Offgridtec 12-1000 PSI converter is equipped with an RS485 data output, which provides you with the options for external communication and configuration: RS485 to USB interface connection cable Part no.: The interface cable, included as standard, allows you to monitor various performance parameters on a notebook or PC. In addition, the PSI 12-1500 can be conveniently configured via the free PSI-Control PC software. Performance features of the PSI 12-1500 at a glance Modern, safe design with galvanic isolation of input and output RS485 communication module for configuration via PC / notebook with free configuration software from Offgridtec Very low self-consumption in idle / stand-by, max. efficiency <> Introduction of advanced SPWM technology, output of a perfect sine wave New thermal design for optimal heat dissipation and reduced noise levels adjustable output voltage 220 / 230VAC and mains frequency 50Hz / 60 Hz via remote meter LED indicators for error status and working status Input protection: overvoltage protection, low-voltage protection Output protection: overload protection, short-circuit protection Overtemperature protection: temperature-controlled cooling and automatic shutdown in case of overtemperature Already included: High-quality battery connection cable with 1m length, RS485 to USB interface cable 1m 35mm² connection cable with M8 ring lugs Performance parameters at a glance Nominal power (continuous power / 15min power / peak power): 1200W / 1500W / 2400W Input voltage range: 10.6 to 16 Vdc Output voltage waveform: pure sine wave USB output 5VDC / 1A, RS485 communication port Significantly more efficiency thanks to the latest SPWM technology all other technical data can be found in the data sheet weight and dimensions (LxWxH): 3.9 kg at 296.3 × 231.5 × 98.5mm all other technical data can be found in the data sheet Scope of delivery: 1x Offgridtec 1-01-011090 PSI 12-1500 Sine wave voltage converter 12V 230V 1500W / 2400W 1x Set battery connection cable 1m 35mm² Red / Black 1x RS485 to USB interface cable 1x instruction manual

The Orion-Tr Smart 12/12-18a from victron Energy (mpn ori121222120) is a galvanically isolated dc-dc converter and charger. It is suitable for use in dual battery systems in vehicles or boats where the (smart) alternator and starter battery are to be used to charge the service battery. The charger can be used in 12v or 24v systems and is suitable for both lead-acid and lithium batteries. An unlimited number of units can be connected in parallel to increase the output power. Thanks to the Orion-Tr Smart 12/12-18a you can supply any 12v consumer with exactly the right voltage. The correct voltage is guaranteed even with longer lines, because the Orion can adjust the voltage to any line losses that occur. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. Integrated Bluetooth, fully programmable monitoring, changing settings and updating the charger when new software features become available can be done with any Bluetooth-enabled smartphone, tablet or other device. The Orion-Tr Smart can be programmed with a configurable battery charging algorithm or a fixed output. It also features smart generator compatibility - engine run detection. Features of the Orion-Tr Smart 12/12-18a 220w (galvanically isolated) victron Energy part number: ori121222120 for 12 v battery voltage, adjustable output voltage 10-15 v max. 220 w output power at a maximum current of 18 A wide input voltage range: 10 -17 v Protection class ip43, galvanic isolation 200 vDC between input, output and housing can be connected in parallel with any number of identical devices to increase output power can be used for buffer charging of batteries remote on/off switch intelligent generator compatibility: engine run detection Adaptive 3-stage charging algorithm: constant current - constant voltage - conservation For lead-acid batteries, it is important to keep the recording time short during shallow discharges to avoid overcharging the battery. After a deep discharge, the constant voltage duration is automatically extended to ensure that the battery charges fully. For lithium batteries, the recording time is fixed, by default 2 hours. Alternatively, a fixed output voltage can be selected. Remote on/off switch A remote on/off switch or a relay contact can be connected to the two-pin connector. Alternatively, the h terminal (right) of the two-pin plug can be connected to a battery positive terminal or the l terminal (left) of the two-pin plug can be connected to the battery negative terminal (or to the body of a vehicle, for example). scope of delivery: 1x victron Energy ori121222120 Orion-Tr Smart 12/12-18a 220 w dc-dc converter 1x instruction manual

The votronic MobilPower smi 1700 sine st-nvs inverter 12 v dc / 230 v ac is designed for use in special purpose vehicles, high end motorhomes and other applications where high quality and reliability are required. It is designed for high continuous loads and provides 1700w continuous and up to 3000w short term peak power for handling high starting currents st-nvs with integrated mains priority circuitry A special highlight of the smi st-nvs series is the integrated mains priority circuit. Thanks to it, your power system automatically draws its energy from the mains when mains power is connected, thus conserving the batteries. When no mains power is available, the unit automatically switches back to battery operation. The exact behavior of the NvS is flexibly adjustable so that different configurations can be implemented according to requirements technical highlights of the MobilPower smi 1700 st-nvs inverters delivers output current with mains voltage quality (pure sine wave) 1700 watt continuous power, designed for 12v battery voltage) only 10w power consumption when switched on without load and only 5w power consumption in standby mode Compromise and problem-free, trouble-free operation of all mains-powered devices, e.g. medical devices, radio, charging holders (cell phone, radios, hand lamps, rechargeable batteries etc.), laptop, pc, air conditioner, coolers, power tools (drill, angle grinder etc. ), Tv, sat, tft, microwave, coffee machine, hair dryer, fan, lights, vacuum cleaner, refrigerator etc Control panel can be rotated 360° on the device and can also be placed freely in the vehicle as an external remote control Switch-mode technology, compact, lightweight, robust and reliable, high overload capacity for a short time Low power consumption, selectable power saving mode: continuous operation or automatic standby with automatic search for switched on consumers or off Automatic shutdown in case of battery over/under voltage, overload, overheating etc Power and temperature controlled comfort cooling fan with infinitely variable speed control High efficiency of over 93 Manufactured according to the latest standards and equipped with resilient power electronics that will not let you down for many years The smi 1700 st-nvs: modern inverter technology from Germany The devices operate according to the latest technology in switched mode. Microprocessor control in conjunction with modern SMD technology has made it possible to realize a compact design. Noise- and friction-optimized smooth-running fans (speed-controlled) ensure perfect cooling and thus problem-free continuous operation even at full power. Integrated protection circuits also monitor thermal and electrical loads as well as overloads and short circuits of the output circuit. The inverters feature an intelligent power saving control with automatic shutdown. It ensures that no more power is consumed in idle mode than absolutely necessary. To protect the batteries, an undervoltage protection is integrated, which switches off the inverter when the battery voltage drops flexible installation of the inverter display panel possible In order to position the inverter optimally, the display panel can be removed after removing the two fastening screws and then reinserted in the desired position (rotatable in 90° steps) and screwed in place. If the inverter is installed in a location that is difficult to access, the display panel can also be used as a remote control. For this purpose, the control panel is removed from the device, reconnected to the device with the 5 m long control cable and mounted at the desired location Optionally, an additional remote control can also be connected if you want a display directly on the device and in the board area Scope of delivery: 1x votronic 3184 smi 1700 st-nvs 12v 230v MobilePower Inverter 5m connection cable for control unit, battery connection terminals, power cable, 1x connection diagram, operating instructions

The Offgridtec PSI 12-500 (MPN 011080) is an advanced 12V 230V sine wave voltage converter with a continuous output of 400W and 500W for a maximum of 15 minutes. The unit features a 16Bit SPWM chipset, numerous protection mechanisms and galvanically isolated inputs and outputs. The input voltage range is 10.6 and 16Vdc. The converter can supply 500W for 15 minutes or 400W continuously. For short inrush currents, the PSI 12-500 delivers 1000W. Thanks to its advanced constitution, even sensitive electrical appliances can be supplied with power reliably and permanently. Advanced development of the HP voltage transformer family The PSI series is the further development of the HP voltage transformers and comes up trumps with numerous innovations and optimisations: Input and output of the PSI are galvanically isolated and the housing has an earth connection. Mains frequency (50Hz/60Hz) and output voltage (220V / 230V) can be set via a dip switch. The brand new SPWM 16-bit chipset delivers power of the highest quality and allows even very sensitive electronics to be reliably supplied with power. Compared to older chipsets, it is much more solid and durable.  PSI converters with a power of 1000W or more are also equipped with an RS485 data output. This allows you to configure numerous parameters and monitor the operation of the unit via a computer / notebook using the PSI software. (Note that the required interface cable is not included in the scope of delivery). Performance features of the PSI 12-500 at a glance modern, safe design with galvanic isolation of input and output. introduction of advanced SPWM technology, output of a perfect sine wave adjustable output voltage 220 / 230VAC and mains frequency 50Hz / 60 Hz via remote meter LED indicators for error status and working status Lower no-load consumption, max. efficiency > 92% Input protection: overvoltage protection, low-voltage protection Output protection: overload protection, short-circuit protection Overtemperature protection: temperature-controlled cooling and automatic shutdown in case of overtemperature Operable USB output 5VDC / 1A 1m 16mm² connection cable with M8 ring lugs Performance parameters at a glance Rated power (continuous power / 15min power / peak power): 400W / 500W / 1000W Input voltage range: 10.6 to 16 Vdc Communication module: none, only integrated from the 1000W class upwards You will find all other technical data in the data sheet Weight and dimensions (LxWxH): 1.7 kg at 232.2×132×74.5mm Scope of Delivery: 1x Offgridtec 1-011080 PSI 12-500 Sine wave voltage converter 12V 230V 500W / 1000W 1x Set battery connection cable 1m 16mm² Red / Black 1x Instruction manual

The Offgridtec psi-pro 12-2000 (mpn 012945) is an advanced 12v 230v sine wave voltage converter with a rated power of 2000w. The device features a 16bit spwm chipset, numerous protection mechanisms and galvanically isolated inputs and outputs. The input voltage range is 10.8 - 16 vdc. For short inrush currents, the psi-pro delivers 4000w. Thanks to its advanced constitution, even sensitive electrical devices can be supplied with power reliably and permanently. Performance features of the psi-pro 12-2000 at a glance modern, safe design with galvanic isolation of input and output rs485 communication module for configuration via pc / notebook with free configuration software from Offgridtec Optional: LCD remote meter for monitoring and control Very low power consumption in idle / stand-by, max. efficiency Introduction of advanced spwm technology, output a perfect sine wave New thermal design for optimal heat dissipation and reduced noise adjustable output voltage 220 / 230VAC and mains frequency 50Hz / 60 Hz via remote meter LED indicators for error status and working status Input protection: reverse polarity protection, undervoltage, overvoltage Output protection: overload, short circuit, overheating overtemperature protection: temperature controlled cooling and automatic shutdown in case of overtemperature Already included: rs485 to usb interface cable & toggle switch for control via remote contact Configuration The Offgridtec 12-2000 psi transducer is equipped with an rs485 data output, providing you with options for external communication and configuration: rs485 to usb interface connection cable The standard included interface cable allows monitoring of various performance parameters on a notebook or pc. Furthermore, the psi 12-2000 can be configured comfortably via the free psi-Control pc software. Performance parameters at a glance Rated power / peak power 2000w / 4000W Input voltage range: 10.8 - 16 VDC Output voltage waveform: pure sine wave Communication module: rs485 usb output 5vdc / 1a, rs485 communication port significantly more efficiency thanks to latest spwm technology all other technical data can be found in the datasheet Weight and dimensions (LxWxH): 7,7kg at 420 x 231,5 x 123 mm Scope of delivery: 1x Offgridtec 1-012945 psi-pro 12-2000 sine wave voltage converter 2x Battery cable 2 AWG / 35mm² 1x toggle switch for remote control 1x user manual

The Offgridtec psi-pro 24-3000 (mpn 012955) is an advanced 24v 230v sine wave voltage converter with a nominal power of 3000w. The device features a 16bit spwm chipset, numerous protection mechanisms and galvanically isolated inputs and outputs. The input voltage range is 21.6 - 32 VDC. For short inrush currents, the psi-pro delivers 6000w. Thanks to its advanced constitution, even sensitive electrical devices can be supplied with power reliably and permanently. Performance features of the psi-pro 24-3000 at a glance modern, safe design with galvanic isolation of input and output rs485 communication module for configuration via pc / notebook with free configuration software from Offgridtec Optional: LCD remote meter for monitoring and control Very low power consumption in idle / stand-by, max. efficiency Introduction of advanced spwm technology, output a perfect sine wave New thermal design for optimal heat dissipation and reduced noise adjustable output voltage 220 / 230VAC and mains frequency 50Hz / 60 Hz via remote meter LED indicators for error status and working status Input protection: reverse polarity protection, undervoltage, overvoltage Output protection: overload, short circuit, overheating overtemperature protection: temperature controlled cooling and automatic shutdown in case of overtemperature Already included: rs485 to usb interface cable & toggle switch for control via remote contact Configuration The Offgridtec 24-3000 psi transducer is equipped with an rs485 data output, providing you with options for external communication and configuration: rs485 to usb interface connection cable The standard included interface cable allows monitoring of various performance parameters on a notebook or pc. Furthermore, the psi 24-3000 can be configured comfortably via the free psi-Control pc software. Performance parameters at a glance Rated power / peak power 3000w / 6000W Input voltage range: 21.6 - 32 VDC Output voltage waveform: pure sine wave Communication module: rs485 usb output 5vdc / 1a, rs485 communication port significantly more efficiency thanks to latest spwm technology all other technical data can be found in the datasheet Weight and dimensions (LxWxH): 8kg at 521 x 274 x 148 mm Scope of delivery: 1x Offgridtec 1-01-012955 psi-pro 24-3000 sine wave voltage converter 1x toggle switch for remote control 1x user manual

The Offgridtec psi-pro 12-3000 (mpn 012950) is an advanced 12v 230v sine wave voltage converter with a rated power of 3000w. The device features a 16bit spwm chipset, numerous protection mechanisms and galvanically isolated inputs and outputs. The input voltage range is 10.8 - 16 vdc. For short inrush currents, the psi-pro delivers 6000w. Thanks to its advanced constitution, even sensitive electrical devices can be supplied with power reliably and permanently. Performance features of the psi-pro 12-3000 at a glance modern, safe design with galvanic isolation of input and output rs485 communication module for configuration via pc / notebook with free configuration software from Offgridtec Optional: LCD remote meter for monitoring and control Very low power consumption in idle / stand-by, max. efficiency Introduction of advanced spwm technology, output a perfect sine wave New thermal design for optimal heat dissipation and reduced noise adjustable output voltage 220 / 230VAC and mains frequency 50Hz / 60 Hz via remote meter LED indicators for error status and working status Input protection: reverse polarity protection, undervoltage, overvoltage Output protection: overload, short circuit, overheating overtemperature protection: temperature controlled cooling and automatic shutdown in case of overtemperature Already included: rs485 to usb interface cable & toggle switch for control via remote contact Configuration The Offgridtec 12-3000 psi-pro transducer is equipped with an rs485 data output, providing you with options for external communication and configuration: rs485 to usb interface connection cable The standard included interface cable allows the monitoring of various performance parameters on a notebook or pc. Furthermore, the psi 12-3000 can be configured comfortably via the free psi-Control pc software. Performance parameters at a glance Rated power / peak power 3000w / 6000W Input voltage range: 10.8 - 16 VDC Output voltage waveform: pure sine wave Communication module: rs485 usb output 5vdc / 1a, rs485 communication port significantly more efficiency thanks to latest spwm technology all other technical data can be found in the datasheet Weight and dimensions (LxWxH): 10,5kg at 557 x 231,5 x 123 mm Scope of delivery: 1x Offgridtec 1-012950 psi-pro 12-3000 sine wave voltage converter 1x toggle switch for remote control 1x user manual

The Orion-Tr Smart 12/12-30a from Victron Energy (mpn ori121236120) is a galvanically isolated dc-dc converter charger. It is suitable for use in dual battery systems in vehicles or boats where the (smart) alternator and starter battery are to be used to charge the service battery. The charger can be used in 12v or 24V systems and is suitable for both lead acid and lithium batteries. An unlimited number of units can be connected in parallel to increase the output power. Thanks to the Orion-Tr Smart 12/12-30a you can supply any 12v consumer with exactly the right voltage. The correct voltage is guaranteed even with longer lines, because the Orion can adjust the voltage to any line losses that occur. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. Integrated Bluetooth, fully programmable monitoring, changing settings and updating the charger as new software features become available can be done with any Bluetooth-enabled smartphone, tablet or other device. The Orion-Tr Smart can be programmed with a configurable battery charging algorithm or a fixed output. It also features smart generator compatibility - engine run detection. Features of the Orion-Tr Smart 12/12-30a 360w (galvanically isolated) Victron Energy part number: ori121236120 for 12v battery voltage, adjustable output voltage 10-15V max. 360w output power at a maximum current of 30A wide input voltage range: 10 -17V Protection class ip43, galvanic isolation 200v dc between input, output and housing can be connected in parallel with any number of identical devices to increase output power can be used for buffer charging of batteries remote on/off switch intelligent generator compatibility: engine run detection Adaptive 3-step charging algorithm: constant current -constant voltage -maintenance For lead-acid batteries, it is important to keep the recording time short during shallow discharges to avoid overcharging the battery. After a deep discharge, the constant voltage duration is automatically extended to ensure that the battery charges fully. For lithium batteries, the recording time is fixed, by default 2 hours. Alternatively, a fixed output voltage can be selected. Remote on/off switch A remote on/off switch or a relay contact can be connected to the two-pin connector. Alternatively, the h terminal (right) of the two-pin plug can be connected to a battery positive terminal or the l terminal (left) of the two-pin plug can be connected to the battery negative terminal (or to the body of a vehicle, for example). scope of delivery: 1x Victron Energy ori121236120 Orion-Tr Smart 12/12-30a 360 w dc-dc converter 1x instruction manual

The Victron Phoenix 12/500VE.Direct (MPN PIN125010200) is a small sine wave inverter with a constant performance of 400W. This device converts your battery's 12V DC-current in a 230V AC-current with pure sine voltage and at a quality that also sensible electronical devices can be supplied. Phoenix inverters are very efficient and thanks to their ECO-mode the most efficient within their range. Via the VE.Direct data port and optional equipment it is possible to connect the inverter to a computer or smartphone and adjust parameters such as switch-on/off voltage freely. Configuration possibilities like output frequency and voltage as well as a 2-pole alarm contact are only some of the features this inverter provides. At the moment the performance range of the Phoenix VE.Direct 250-500 series is unique on the market and exceeds other devices within this price range by far. Technical features: 400W constant current at 230V 50Hz sine voltage Suitable for all common battery types 230V AC current with pure sine wave provides excellent quality Switch-on/off threshold freely programmable Output voltage freely adjustable within a range of 210V to 245V Technical highlights of the Phoenix VE.Direct 250VA – 500VA seriesVE.Direct data port allows a connection of inverter and computer (VE.Direct to USB-interface cable needed) or smartphone (free Victron app) to monitor your system's current status (VE.Direct Bluetooth Smart Dongle needed).Fully programmable parameters: thresholds for activating and resetting alarms at low battery chargin level + thresholds for switching-off and restarting at low battery voltage values + output voltage 210V - 245V + frequency 50Hz or 60Hz + threshold to de/activate ECO-mode and ECO-mode sensorIntegrated ECO-mode: Running in ECO-mode the inverter switches to standby as soon as the load drops below a predefined value. In standby-mode the inverter switches back on for a short time (default setting: 2.5 seconds)  

The Victron Orion 12/24-8 (MPN ORI122408020) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-consumers. The 12/24 converts 12V DC into 24V DC with constant 8A (192W). Moreover it compensates possible conductor losses as well as fluctuations of the battery voltage. Important details: 12V DC operation voltage, 24V output voltage wide input-voltage-range of 18V to 36V 192W output at constant 8A max. 20A output current high efficiency of 95% weight: 0.4kg Delivery scope:1x Victron ORI122408020 Orion 12/24-8 DC DC Converter 12V to 24V 8A 192W

The Victron Orion 24/12 60W (MPN ORI241205200R) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-consumers. The 24/12 converts 24V DC into 12V DC with constant 5A (60W). Moreover it compensates possible conductor losses as well as fluctuations of the battery voltage. Important details: 24V DC operation voltage, 12V DC output voltage wide input-voltage-range of 18V to 36V 60W output at constant 5A weight: 0.2kg Version not insulated Delivery scope: 1x Victron ORI241205200R Orion 24/12-5A DC DC Converter 24V to 12V 5A 60W

The Offgridtec PSI 24-2000 (MPN 011255) is an advanced 24V 230V sine wave voltage converter with a continuous output of 1600W and 2000W for a maximum of 15 minutes. The unit features a 16Bit SPWM chipset, numerous protection mechanisms and galvanically isolated inputs and outputs. The input voltage range is 21.6 and 32Vdc. The converter can deliver 2000W for 15 minutes or 1600W continuously. For short inrush currents, the PSI 24-2000 delivers 3200W. Thanks to its advanced constitution, even sensitive electrical appliances can be supplied with power reliably and permanently Advanced development of the HP voltage transformer family The PSI series is the further development of the HP voltage transformers and comes up trumps with numerous innovations and optimisations: Input and output of the PSI are galvanically isolated and the housing has an earth connection. Mains frequency (50Hz/60Hz) and output voltage (220V / 230V) can be set via a dip switch. The brand-new SPWM 16-bit chipset delivers power of the highest quality and allows even very sensitive electronics to be reliably supplied with power. Compared to older chipsets, it is much more solid and durable. PSI converters with a power of 1000W or more are also equipped with an RS485 data output. This allows you to configure numerous parameters and monitor the operation of the unit via a computer / notebook using the PSI software. (the required interface cable is included in the scope of delivery). Configuration The Offgridtec 12-1000 PSI converter is equipped with an RS485 data output, which provides you with the options for external communication and configuration: -RS485 to USB interface connection cable Part no.: The interface cable, included as standard, allows you to monitor various performance parameters on a notebook or PC. In addition, the PSI 24-2000 can be conveniently configured via the free PSI-Control PC software. Performance features of the PSI 24-2000 at a glance modern, safe design with galvanic isolation of input and Output RS485 communication module for configuration via PC / notebook with free configuration software from Offgridtec Very low self-consumption in idle / stand-by, max. efficiency <> Introduction of advanced SPWM technology, output of a perfect sine wave New thermal design for optimal heat dissipation and reduced noise Levels adjustable output voltage 220 / 230VAC and mains frequency 50Hz / 60 Hz via remote meter LED indicators for error status and working Status Input protection: overvoltage protection, low-voltage protection Output protection: overload protection, short circuit protection Overtemperature protection: temperature-controlled cooling and automatic shutdown in case of overtemperature Already included: High-quality battery connection cable with 1m length, RS485 to USB interface cable Performance parameters at a glance -Nominal power (continuous power / 15min power / peak power): 1600W / 2000W / 3200W -Input voltage range: 21.6 to 32 Vdc -Output voltage waveform: pure sine wave -Communication module: RS485 -USB output 5VDC / 1A, RS485 communication port -Significantly more efficiency thanks to the latest SPWM technology -all other technical data can be found in the data sheet -Weight and dimensions (LxWxH): 4.6 kg at 326.5 × 231.5 × 98.5mm Scope of delivery: 1x Offgridtec 1-01-0155 PSI 24-2000 Sine wave voltage converter 24V 230V 2000W / 3200W 1x Set battery connection cable 1m 25mm² Red / Black 1x RS485 to USB interface cable 1x instruction manual

The Orion-Tr 12/12-18 from Victron Energy (mpn ori121222110) is a galvanically isolated dc-dc voltage converter and provides regulated dc voltage for trouble-free operation of your dc loads. The compact Orion-TR dc-dc voltage converter converts dc input voltage (8-17v) to a regulated 12v output voltage (10-15v) and delivers a constant continuous current of 18a, which is equivalent to 220w of power. Thanks to the Orion-Tr 12/12-18, you can supply any 12v load with exactly the right voltage. The correct voltage is guaranteed even with longer lines, because the Orion can adjust the voltage to any line losses that occur. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. Furthermore, the Orion-Tr 12/12-18 can be connected in parallel with identical devices and has a remote-controlled on/off switch. important features of the Orion-Tr 12/12-18 220w (with galvanic isolation) Victron Energy part number: ori121222110 for 12v battery voltage, adjustable output voltage 10-15V max. 220w output power at a maximum current of 18a wide input voltage range: 8-17V Protection class ip43, galvanic isolation 200v dc between input, output and housing can be connected in parallel with similar devices for increased performance remote on/off switch wide input voltage range: 8-17V high efficiency of 87 Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries. remote on/off switch The remote on/off connector eliminates the need for a high-current switch in the input wiring. The remote on/off connection can be controlled with a power save switch or by the motor's run/stop switch (see manual) Scope of delivery: 1x Victron Energy ori121222110 Orion-Tr 12/12-18 18a 220w dc-dc voltage converter

The Victron Phoenix 12/1200VE.Direct (mpn pin122120200) is a small sine wave inverter with 1200w continuous power. The device converts 12v DC from your battery to 230v ac AC with a pure sine wave voltage and uncompromising power quality that is ideal for sensitive electronic products. trend-setting efficiency and modern system communication The efficiency of the Phoenix is outstanding and one of the highest in its class thanks to the ECO mode. using the VE.Direct communication port with optional accessories, you can connect the device to a computer or smartphone and program some system parameters such as the switch-off voltage and switch-on voltage when the battery is empty completely freely! Many other configuration options such as output frequency and output voltage as well as a 2-pole alarm contact are among the features of this voltage converter. The performance range of the Phoenix series VE.Direct 12/1200 is unique on the market at the moment for the price and goes far beyond the capabilities of other devices in the same performance classes. technical features of the Phoenix 12/1200 VE.Direct 1000 Watt continuous power at 230v 50Hz sine wave voltage 1200 watts continuous power at non-linear load full control over almost all system parameters suitable for all common 12v batteries 230v ac power with pure sine wave provides perfect power quality free programmable on and off thresholds freely adjustable output voltage in the range of 210 - 245V technical highlights of the Phoenix VE.Direct series 250va - 1200VA VE.Direct connector allows you to connect the power converter to a computer (VE.Direct to USB interface cable required) or your smartphone where you can always keep an eye on the status of your device with the free Victron app (VE.Direct Bluetooth Smart Dongle required). Fully programmable parameters: Thresholds to trigger and reset low battery alarms + Thresholds to turn off and restart at low battery voltage levels + Output voltage 210 - 245V + Thresholds to turn off and restart at low battery voltage levels + Frequency 50 Hz or 60 Hz + Threshold for ECO mode on/off and ECO mode sensor ECO mode integrated: In ECO mode, the inverter switches to standby as soon as the load drops below a preset value. In standby mode, the inverter then switches on for a short period of time (adjustable default setting: every 2.5 seconds). if the load exceeds a preset threshold, the inverter remains switched on. Proven reliability of the current inverter: Full bypassing in addition with a ring transformer topology has been proven for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or ambient temperature). High inrush power: This is needed to switch on loads such as voltage converters for LED lamps, halogen lamps or power tools. Remote on/off switching possible: A remote on/off switch can be connected with a two-pole plug or between the positive pole of the battery and the left contact of the two-pole plug. Scope of delivery: 1x Victron pin122120200 Phoenix 12/1200 12v to 230v 1000w 50Hz 60Hz

The Victron Orion 24/12-15 180W (MPN ORI241215200R) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-consumers. The 24/12 converts 24V DC into 12V DC with constant 15A (180W). Moreover it compensates possible conductor losses as well as fluctuations of the battery voltage. Important details: 24V DC operation voltage, 12V DC output voltage wide input-voltage-range of 18V to 36V 180W output at constant 15A Version not insulated Delivery scope: 1x Victron ORI241215200R Orion 24/12-15 DC DC Converter 24V to 12V 15A 180W

Der Orion-Tr 24/24-12 von Victron Energy (MPN ORI242428110) ist ein galvanisch isolierter DC-DC Spannungs-Wandler und sorgt für eine geregelte Gleichspannung und somit für den störungsfreien Betrieb Ihrer DC-Verbraucher. Der kompakte Orion-TR DC-DC Spannungswandler wandelt die DC-Eingangsspannung (16-35V) in eine regelbare 24V Ausgangsspannung (20-30V) um und liefert einen konstanten Dauerstrom von 12A, was einer Leistung von 280W entspricht. Dank des Orion-Tr 24/24-12 können Sie jeden 24V Verbraucher mit genau der passenden Spannung versorgen. Die richtige Spannung ist dabei auch bei längeren Leitungen gewährleistet, da der Orion die Spannung an auftretende Leitungsverluste anpassen kann. Bei vielen empfindlichen Elektronik Geräten ist das Einhalten der genauen Betriebsspannung essenziell für eine reibungslose Funktion. Weiterhin beherrscht der Orion-Tr 24/24-12 die Parallelschaltung mit baugleichen Geräten und besitzt einen fernsteuerbaren Ein- Ausschalter. wichtige Merkmale des Orion-Tr 24/24-12 280W (mit galvanischer Trennung) Victron Energy Teilenummer: ORI242428110 für 24V Batteriespannung, regelbare Ausgangsspannung 20-30V max. 280W Ausgangsleistung bei einem maximalen Strom von 12A breiter Eingangsspannugsbereich: 16-35V Schutzart IP43, galvanische Trennung 200V DC zwischen Eingang, Ausgang und Gehäuse kann mit gleichartigen Geräten zur Leistungssteigerung parallel verschalten werden fernbedienbarer Ein- und Ausschalter hoher Wirkungsgrad von 87% Nicht zum Laden von Batterien geeignet. Erwägen Sie bitte den Einsatz eines Orion-Tr Smart zum Laden der Batterien. fernbedienbarer Ein/Aus-Schalter Durch den fernbedienbaren Ein-/Aus-Anschluss ist kein Hochstrom-Schalter in der Eingangsverkabelung mehr notwendig. Der fernbedienbare Ein-/Aus-Anschluss lässt sich mit einem Stromsparschalter oder durch den Run/Stopp Schalter des Motors steuern (siehe Handbuch). Lieferumfang: 1x Victron Energy ORI242428110 Orion-Tr 24/24-12 12A 280W DC-DC Spannungswandler

The Orion-Tr 12/12-30 from Victron Energy (mpn ori121240110) is a galvanically isolated dc-dc voltage converter and provides regulated dc voltage for trouble-free operation of your dc loads. The compact Orion-TR dc-dc voltage converter converts dc input voltage (10-17v) to a regulated 12v output voltage (10-15v) and delivers a constant continuous current of 30a, which is equivalent to 360w of power. Thanks to the Orion-Tr 12/12-30, you can supply any 12v load with exactly the right voltage. The correct voltage is guaranteed even with longer lines, because the Orion can adjust the voltage to any line losses that occur. For many sensitive electronic devices, maintaining the exact operating voltage is essential for smooth operation. Furthermore, the Orion-Tr 12/12-30 can be connected in parallel with identical devices and has a remote-controlled on/off switch. important features of the Orion-Tr 12/12-30 360w (with galvanic isolation) Victron Energy part number: ori121240110 for 12v battery voltage, adjustable output voltage 10-15V max. 360w output power at a maximum current of 30a wide input voltage range: 10-17V Protection class ip43, galvanic isolation 200v dc between input, output and housing can be connected in parallel with similar devices for increased performance remote on/off switch wide input voltage range: 10-17V high efficiency of 87 Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries. remote on/off switch The remote on/off connector eliminates the need for a high-current switch in the input wiring. The remote on/off connection can be controlled by a power save switch or by the motor's run/stop switch (see manual) Scope of delivery: 1x Victron Energy ori121240110 Orion-Tr 12/12-30 30a 360w dc-dc voltage converter

The Phoenix 12/3000 Smart Inverter from Victron Energy (mpn pin122300000), is an advanced inverter based on the proven Phoenix series. It offers 3000w continuous power and is designed for 12v battery voltage. Compared to the previous models, the Phoenix-Smart series has a Bluetooth module and VE.Direct output for wireless remote monitoring and system configuration The Phoenix 12/3000 Smart is further characterized by its high switch-on power and reliability and, thanks to the integrated eco mode, also plays in the top league of this device class in terms of self-consumption and efficiency. phoenix 12/3000 Smart performance features for 12v battery voltage, output voltage range 210c - 245V Output power (non-linear): 3000w, 2400w linear continuous load at 25 degrees ambient temperature 6000W peak power handling high starting currents integrated Bluetooth module and VE.Direct port for wireless monitoring and system integration designed for high inrush currents integrated alarm relay, eco mode Monitoring of input and output voltage, load and alarms etc. via Bluetooth or VE.Direct integrated two-pole plug for connection of an on/off switch (remote control) parameters configurable via Bluetooth or VE.Direct Low battery voltage alarm Threshold values for switching off and restarting at low battery voltage values Dynamic shutdown: load-dependent shutdown threshold value Output voltage: 210 - 245v, frequency: 50 hz or 60 hz Threshold for eco-mode on/off and eco-mode sensor Alarm relay high reliability thanks to ring transformer topology The complete bridging additionally with a ring transformer topology has proven itself for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or by the ambient temperature). very high inrush power This is required for switching on loads such as voltage converters for led lamps, halogen lamps or power tools. Eco mode In eco mode, the inverter switches to standby as soon as the load drops below a preset value. In standby mode, the inverter then switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset threshold, the inverter remains on. Remote on/off switching A remote on/off switch or relay contact can be connected to the two-pin connector. Alternatively, the h terminal (left) of the two-pin connector can be connected to a battery positive terminal or the l terminal (right) of the two-pin connector can be connected to the battery negative terminal (or to the body of a vehicle, for example). scope of delivery: 1x Victron pin122300000 Phoenix Smart 12/3000 1x instruction manual

The Victron Phoenix 24/375 VE.Direct (MPN PIN243750200) is a small sine inverter with a constant output of 300W. It converts a 24V DC voltage into 230V AC with pure sine wave, suitable to supply even sensitive electronic devices.Its efficiency level is very high and thanks to the integrated ECO-mode one of the highest in this class. Via the VE.Direct communication port and optional equipment it is possible to connect the inverter to a computer or smartphone which allows the configuration of various system parameters, for example the switch-on and switch-off voltage at low battery charge.Other adjustments like output frequency or voltage as well as a bipolar alarm-contact are only some of this inverter's features. The performance range of the Phoenix series VE.Direct 250-500 at this price is unique on the market and exceeds the abilities of other devices of this performance class enormously. Technical data: 300W constant output at 230V 50Hz sine voltage for 24V battery voltage, works with all common battery types 230V AC current with pure sine wave provides perfect current quality freely programmable switch-on7off threshold adjustable output voltage from 210 - 245V Technical highlights of the Phoenix VE.Direct series 250VA – 500VA 24V VE.Direct output allows the connection of the inverter to a computer (VE.Direct-to-USB cable needed) or your smartphone - together with the free Victron app it is possible to always keep an eye on your device (VE.Direct Bluetooth Smart Dongle needed) Fully programmable parameters: thresholds for activating or resetting alarms at low battery charge + thresholds for activating or restarting at low battery voltage + output voltage 210 - 245V + frequency of 50Hz or 60Hz + thresholds for ECO-mode on/off and ECO-mode sensor Integrated ECO-mode: In this mode the inverter switches to standby as soon as the load falls under a predefined value. In standby-mode the inverter reactivates for a short time (adjustable default setting: every 2.5s). If the load exceeds a predefined threshold the inverter stays activated. Proven reliability of this inverter:The full override via a torodial transformer topology has often proven itself over the last years. This inverters are save from short-circuits and overheating (caused by overload or ambient temperature).High starting performance: This is needed to activate loads like LED-drivers, halogen lamps or electrical tools.Remote controlled on/off-switching possible: A remote on/off-switch can be installed via a bipolar plug between the battery's +-pole and the left contact of the plug. Delivery scope:1x Victron PIN243750200 Phoenix 24/375 24V to 230V 300W 50Hz 60Hz

The Victron Orion-Tr 48/12-9 (MPN ORI481210110) is an isolated DC-DC converter and provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-consumers. The 48/12 converts an adjustable input voltage of 32-70V DC into an adjustable DC output voltage of 10-15V with constant 9A (110W) to supply any 12V-consumer with the right voltage. Especially when it comes to sensitive electronics a precise voltage is vital for flawless operation. Additionally the Orion-Tr 48/12 supports parallel operation with identical devices and is equipped with a remote controllable on-/off-switch. Important details: 48V DC operation voltage, adjustable 12V output voltage 10-15V supports parallel operation with identical devices - increases output current remote control possible protection class IP43 wide input-voltage-range of 8V to 17V 110W output at constant 9A max. 12.5A output current high efficiency of 87% weight: 0.42kg Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries. These 48V DC-DC converters out of the Orion-series provide a clean output voltage of 10-15V and compensate possible conductor losses as well as fluctuations of the battery voltage. Remote on-/off-connection on all high-performance models Thanks to the remote on-/off-switch a high-current-switch on the input-cabling is not necessary. It can be controlled via a power-saving-switch or through the motor's run/stop-switch (see manual). Adjustable output voltage allows battery charging For example to charge a 12V battery bank in a 48V-system. Parallel operation Any number of units can be connected parallely. Delivery scope: 1x Victron ORI481210110 Orion 48/12-9 DC-DC Converter 48V to 12V (10-15V adjustable) 9A 120W

The Victron Orion 12/24-20 (MPN ORI122420020) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-consumers. The 12/24 converts 12V DC into 24V DC with constant 20A (480W). Compared to smaller models out of this series it is possible to adjust the output voltage (20-30V).Moreover the 12/24 can be used for trickle charge of your battery and supports parallel operation with identical devices to increase the output current. Important details: 12V DC operation voltage, adjustable output voltage 20-30V supports parallel operation with identical devices - increases output current can be used for trickle charge remote control possible temperature-controlled ventilation wide input-voltage-range of 9V to 18V 480W output at constant 20A max. 30A output current high efficiency of 93% weight: 0.4kg DC-DC converter out of the Orion-series provide a clean 24V output current and compensate possible conductor losses as well as fluctuations of the battery voltage. Remote on-/off-connection on all high-performance modelsThanks to the remote on-/off-switch a high-current-switch on the input-cabling is not necessary. It can be controlled via a power-saving-switch or through the motor's run/stop-switch (see manual). Adjustable output voltage allows battery chargingThanks to the adjustable output voltage it is possible to charge a 24V battery through a 12V-system. Parallel operationUp to 5 units can be connected parallely. Delivery scope:1x Victron ORI122420020 Orion 12/24-20 DC DC Converter 12V to 24V 20A 480W

The Victron Orion-Tr 12/24-5 (MPN ORI122410110) is an isolated DC-DC converter and provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-consumers. The 12/24 converts an adjustable input voltage of 8-17V DC into an adjustable DC output voltage of 20-30V with constant 5A (120W) to supply any 12V-consumer with the right voltage. Especially when it comes to sensitive electronics a precise voltage is vital for flawless operation. Additionally the Orion Tr 12/24 supports parallel operation with identical devices and is equipped with a remote controllable on-/off-switch. Important details: 12V DC operation voltage, adjustable output voltage 20-30V supports parallel operation with identical devices - increases output current remote control possible IP43 wide input-voltage-range of 8V to 17V 120W output at constant 5A max. 6.3A output current high efficiency of 87% weight: 0.42kg Not suitable for charging batteries. Please consider using an Orion-Tr Smart to charge the batteries. These 12V DC-DC converters out of the Orion-series provide a clean output voltage of 20-30V and compensate possible conductor losses as well as fluctuations of the battery voltage. Remote on-/off-connection on all high-performance models Thanks to the remote on-/off-switch a high-current-switch on the input-cabling is not necessary. It can be controlled via a power-saving-switch or through the motor's run/stop-switch (see manual). Adjustable output voltage allows battery charging Parallel operation Up to 5 units can be connected parallely. Delivery scope: 1x Victron ORI122410110 Orion 12/24-5 DC-DC Converter 12V to 24V (20-30V adjustable) 5A 240W

The Phoenix 24/3000 Smart Inverter from Victron Energy (mpn pin242300000), is an advanced inverter based on the proven Phoenix series. It offers 3000w continuous power and is designed for 24v battery voltage. Compared to the previous models, the Phoenix-Smart series has a Bluetooth module and VE.Direct output for wireless remote monitoring and system configuration The Phoenix 24/3000 Smart is further characterized by its high switch-on power and reliability and, thanks to the integrated eco mode, also plays in the top league of this device class in terms of self-consumption and efficiency. phoenix 24/3000 Smart performance features for 24v battery voltage, output voltage range 210c - 245V Output power (non-linear): 3000w, 2400w linear continuous load at 25 degrees ambient temperature 6000w peak power handling high starting currents integrated Bluetooth module and VE.Direct port for wireless monitoring and system integration designed for high inrush currents integrated alarm relay, eco mode Monitoring of input and output voltage, load and alarms etc. via Bluetooth or VE.Direct integrated two-pole plug for connection of an on/off switch (remote control) parameters configurable via Bluetooth or VE.Direct Low battery voltage alarm Threshold values for switching off and restarting at low battery voltage values Dynamic shutdown: load-dependent shutdown threshold value Output voltage: 210 - 245v, frequency: 50 hz or 60 hz Threshold for eco-mode on/off and eco-mode sensor Alarm relay high reliability thanks to ring transformer topology The complete bridging additionally with a ring transformer topology has proven itself for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or by the ambient temperature). very high inrush power This is required for switching on loads such as voltage converters for led lamps, halogen lamps or power tools. Eco mode In eco mode, the inverter switches to standby as soon as the load drops below a preset value. In standby mode, the inverter then switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset threshold, the inverter remains on. Remote on/off switching A remote on/off switch or relay contact can be connected to the two-pin connector. Alternatively, the h terminal (left) of the two-pin connector can be connected to a battery positive terminal or the l terminal (right) of the two-pin connector can be connected to the battery negative terminal (or to the body of a vehicle, for example). scope of delivery: 1x Victron pin242300000 Phoenix Smart 24/3000 1x instruction manual

The Victron Orion 12/24-10 (MPN ORI122410020) DC DC converter provides constant DC-voltage and therefore ensures uninterrupted operation of your DC-consumers. The 12/24 converts 12V DC into 24V DC with constant 10A (240W). Compared to smaller models out of this series it is possible to adjust the output voltage (20-30V).Moreover the 12/24 can be used for trickle charge of your battery and supports parallel operation with identical devices to increase the output current. Important details: 12V DC operation voltage, adjustable output voltage 20-30V supports parallel operation with identical devices - increases output current can be used for trickle charge remote control possible temperature-controlled ventilation wide input-voltage-range of 9V to 18V 240W output at constant 10A max. 10A output current high efficiency of 95% weight: 0.4kg DC-DC converter out of the Orion-series provide a clean 24V output current and compensate possible conductor losses as well as fluctuations of the battery voltage. Remote on-/off-connection on all high-performance modelsThanks to the remote on-/off-switch a high-current-switch on the input-cabling is not necessary. It can be controlled via a power-saving-switch or through the motor's run/stop-switch (see manual). Adjustable output voltage allows battery chargingThanks to the adjustable output voltage it is possible to charge a 24V battery through a 12V-system. Parallel operationUp to 5 units can be connected parallely. Delivery scope:1x Victron ORI122410020 Orion 12/24-10 DC DC Converter 12V to 24V 10A 240W