The mTriple Flex l solaranlagen offer the ideal power supply for your motorhome or camper. The combination of the vbcs Triple from Votronic and the ETFE-Al solar module from Offgridtec offers a secure power supply and optimum yields. The permanent supply is ensured in three different ways. Charging from the grid in standby mode, while driving with the help of the charge booster, and the combination of solar module and MPPT charge controller in sunshine. With the device combination and the semi-flexible solar module, the total weight of the system is reduced to a minimum, ideal for mounting on a camper or motor home. Features of the mTriple Flex l Average daily yield of 640Wh or 1280Wh (March - October) Permanent power supply with 3 charging options Device combination of mains charger, charge booster and solar controller Suitable for all common battery types (lead-acid, agm, GEl, lithium) light & extremely flat solar module - ideal for motorhome mounting With lCD display for monitoring the system parameters Mounting material and cable package included All components perfectly matched quick and easy installation according to plug & play principle The mTriple Flex l solaranlage contains: Offgridtec ETFE-Al 160w 12v semi-flexible solar panel (1x or 2x depending on selection) 1x Votronic vbcs 45/30/350 Triple-CI device combination 1x Votronic 1247 Charge Control s Display or 1x Votronic 5748 vpc Jupiter 200 combo panel 1x Offgridtec Roof bushing 1-fold for cable diameter 13mm-18mm white 1x Dekalin Dekasyl Ms-5 adhesive set white 1x 8m Offgridtec Connection cable from solar module to charge controller 2x6mm² 1x 1,5m 10mm² Offgridtec battery cable with MIDI fuse holder - screw terminal connection on M8 1x 2.5m 10mm² Offgridtec Battery cable with MIDI fuse holder - screw terminal connection on M8 1x Offgridtec 60a 58v MIDI fuse & 1x Offgridtec 80a 58v MIDI fuse additional for 2 modules 1x Offgridtec Branching sockets & 1x Dekalin adhesive Ms-5 white The electronics core - the Votronic vbcs triple device combination The vbcs Triple ensures your permanent power supply in three ways. With the Pb mains charger with 30a you can charge your battery efficiently in standby mode from the mains. The VCC charging converter with 45a allows you to charge your on-board battery while driving. The third option offers the charging with solar energy with the help of the MPP solar regulator for max.350Wp.The supplied temperature sensor ensures the optimal charging of your batteries. PB mains charger:The powerful charging of the on-board battery and supply of the 12v consumers from the mains. The full charging power in the universal range of 110v/ac-230v/ac without switching is available worldwide even in case of large deviations of the mains supply (undervoltage/overvoltage, sinusoidal shape, frequency). Thanks to the long-term charging characteristics, the device can be constantly connected to the mains (operational, winter break) VCC charge converter:The powerful charge booster allows full charging of the on-board battery while driving. It increases/decreases the voltage to the required level so that the on-board battery can be charged with the optimal charging characteristic. It fully compensates for line losses and severe alternator voltage fluctuations, which are common in Euro 6 vehicles. The supplied 12v consumers are protected against overvoltage and voltage fluctuations. MPP solar controller:The MPP charge controller ensures a charge current gain of 10-30%, shorter charging times and the best possible power utilization of your solarasystem. The MPP technology automatically determines the maximum power output of the connected solar modules several times per second. The complete system also includes either the Charge Control s display or the vpc Jupiter 200 combination panel from Votronic. With both displays, the current output of the solarasystem can be reliably displayed, monitored and controlled. The Jupiter panel offers the additional options of a battery computer and water management. Flexible solar supply - the Offgridtec ETFE-Al 160w solar module The semi-flexible solar module is based on the material composition aluminum-ETFE and is equipped with highly effective monocrystalline solar cells. The superimposed ETFE layers on the front provide solid protection for the cells inside and a high light yield over many years. In addition, the modules are walkable and non-slip, making them the perfect choice for mobile applications. The AlU backing almost completely prevents cell cracking due to incorrect handling or installation. Power management is handled by five busbars, ensuring solid throughput without heat loss even at high currents. power (Pmax): 160wp voltage (Vmp): 18V max. current (Imp): 8,89A Short circuit current (Isc): 9,42A max. system voltage: 200V/DC Bendable: max. 10° (l) Weight: 6,6kg Dimensions: 665 x 1310 x 4 mm Optimal cabling - Manufactured in the Offgridtec cable manufactory The mTriple solarasystem is supplied, according to the plug & play principle, with all the connecting cables required for commissioning the system. The cables are all manufactured in our own cable factory and have an optimal connection quality. The 8m long connection cable from module to charge controller allows a flexible installation, depending on the conditions on site. The battery cables have an integrated MIDI fuse holder to protect the charge controller and the technology behind it in the event of a short circuit or overcurrent. The appropriate fuses for the system are also included. Mounting material included The complete system is delivered with all mounting material needed to mount it on your vehicle. The Dekalin adhesive set for bonding the solar modules to the vehicle roof contains, in addition to the white power adhesive, cleaning cloths, a wool wiper and the Dekavator bonding agent. The Offgridtec roof feed-through creates the connection between the solar module on the roof and the charge controller inside the vehicle. The version with two solar modules also contains a pair of junction boxes for parallel connection of the two modules. Individual adaptations As with all our complete systems, individual adaptations are possible. contact us! Please ask our customer service for possible costs.

The mTriple Flex s solarasystems offer the ideal power supply for your motorhome or camper. The combination of the VBCs Triple from Votronic and the etfe-sPR solar module from Offgridtec offers a secure power supply and optimum yields. The permanent supply is ensured in three different ways. Charging from the mains while stationary, while driving with the help of the charge booster, and the combination of solar module and MPPT charge controller in sunshine. The compact combination of the VBCs and the highly efficient flexible solar module is ideal when installation space is limited and reduces the total weight to a minimum. The system is not only suitable for self-sufficient standing and with the flexible solar panel also predestined for use on caravan campers. Features of the mTriple Flex s Average daily yield of 440Wh or 880Wh (March - October) Permanent power supply with 3 charging options Device combination of mains charger, charge booster and solar controller Suitable for all common battery types (lead-acid, agm, gel, lithium) Lightweight & extremely flat solar module - ideal for motorhome mounting With LCD display for monitoring system parameters Mounting material and cable package included All components perfectly matched quick and easy installation according to plug & play principle The mTriple Flex s solaranlage contains: Offgridtec 110w etfe-sPR flexible solar panel (1x or 2x depending on selection) 1x Votronic 3242 VBCs 30/20/250 Triple-CI device combination 1x Votronic 1247 Charge Control s Display or 1x Votronic 5747 vpc Jupiter 100 Combi Panel 1x Offgridtec Roof bushing 1-fold for cable diameter 13mm-18mm white 1x Dekalin Dekasyl Ms-5 adhesive set white 1x 8m Offgridtec connection cable from solar module to charge controller 1x 1,5m 10mm² Offgridtec battery cable with MIDI fuse holder - screw terminal connection on M8 1x 2.5m 10mm² Offgridtec Battery cable with MIDI fuse holder - screw terminal connection on M8 1x Offgridtec 40a 58v MIDI fuse & 1x Offgridtec 50a 58v MIDI fuse additional for 2 modules1x Offgridtec Jacks & 1x Dekalin Adhesive Ms-5 white The electronics core - the Votronic VBCs Triple device combination The VBCs Triple ensures your permanent power supply in three ways. With the Pb mains charger with 20a you can charge your battery efficiently in standby mode from the mains. The VCC charge converter with 30a allows you to charge your on-board battery while driving. The third option offers the charging with solar energy using the MPP solar regulator for max.250Wp.The supplied temperature sensor ensures the optimal charging of your batteries. Pb mains charger:The powerful charging of the on-board battery and supply 12V consumers from the mains. The full charging power in the universal range of 110v/ac-230v/ac without switching is available worldwide even with large deviations of the mains supply (under/over voltage, sinusoidal shape, frequency). Thanks to the long-term charging characteristics, the device can be constantly connected to the mains (operational, winter break) VCC charge converter:The powerful charge booster allows full charging of the on-board battery while driving. It increases/decreases the voltage to the required level so that the on-board battery can be charged with the optimal charging characteristic. It fully compensates for line losses and strong voltage fluctuations of the alternator, which are common in Euro 6 vehicles. The supplied 12V consumers are protected against overvoltage and voltage fluctuations. MPP solar controller:The MPP charge controller ensures a charge current gain of 10-30%, shorter charging times and the best possible power utilization of your solaranlage. The MPP technology automatically determines the maximum power output of the connected solar modules several times per second. The complete system also includes either the Charge Control s Display or the vpc Jupiter 100 combination panel from Votronic. Both displays can be used to reliably display, monitor and control the current output of the solaransystem. The Jupiter panel additionally offers the possibilities of a battery computer and water management. Flexible solar supply - the Offgridtec etfe-sPR 110w solar module The semi-flexible etfe-sPR 110w solar module is a high-performance solar cell that is ideally suited for mounting on a motorhome. The module of the plastic solar glass made of etfe is slightly corrugated and can be walked on without hesitation when fully bonded, even when wet. The etfe High-Tec plastic ensures weight savings and at the same time a high light transmission of max. 96%. Power (Pmax): 110wp voltage (Vmp): 18,56V max. current (Imp): 5,97A Short circuit current (Isc): 6,34A max. system voltage: 45V/DC Bendable: up to max. 30° Weight: 2,5 kg Dimensions: 540 x 1070 x 30 mm Optimal cabling - Manufactured in the Offgridtec cable manufactory The mTriple solarasystem is supplied, in line with the plug & play principle, with all the connecting cables required for commissioning the system. The cables are all manufactured in our own cable factory and have an optimal connection quality. The 8m long connection cable from module to charge controller allows a flexible installation, depending on the conditions on site. The battery cables have an integrated MIDI fuse holder to protect the charge controller and the technology behind it in the event of a short circuit or overcurrent. The appropriate fuses for the system are also included. Mounting material included The complete system is delivered with all mounting material needed to mount it on your vehicle. The Dekalin adhesive set for bonding the solar modules to the vehicle roof contains, in addition to the white power adhesive, cleaning cloths, a wool wiper and the Dekavator bonding agent. The Offgridtec roof bushing is used to create the connection between the solar module on the roof and the charge controller inside the vehicle. The version with two solar modules also contains a pair of junction boxes for parallel connection of the two modules. Individual adaptations As with all our complete systems, individual adaptations are possible. contact us! Please ask our customer service for possible costs.

The mTriple l solaranlagen offer the ideal power supply for your motorhome or camper. The combination of the vbcs Triple from Votronic and the OlP solar module from Offgridtec provides a reliable power supply and optimum yields. The permanent supply is ensured in three different ways. Charging from the mains while stationary, while driving with the help of the charging booster, and the combination of solar module and MPPT charge controller in sunshine. The compact combination of the vbcs and the highly efficient solar module is ideal where installation space is limited. The system is not only suitable for stand-alone operation, and with the framed solar panel it is also predestined for use on expedition vehicles. Features of the mTriple l: Average daily yield of 720Wh or 1440Wh (March - October) Permanent power supply with 3 charging options Device combination of mains charger, charge booster and solar controller Suitable for all common battery types (lead-acid, agm, GEl, lithium) Resistant framed solar module - ideal for motorhome & camper mounting With lCD display for monitoring system parameters Mounting hardware and cable package included All components perfectly matched quick and easy installation according to plug & play principle The mTriple l solaranlage contains: Offgridtec 180w OlP solar panel 12v with shingle technology PERC (1x or 2x depending on selection) 1x Votronic 3244 vbcs 45/30/350 Triple-CI device combination 1x Votronic 1247 Charge Control s Display or 1x Votronic 5748 vpc Jupiter 200 combo panel 1x Offgridtec Roof bushing 1-fold for cable diameter 13mm-18mm black 1x Dekalin Dekasyl Ms-5 adhesive set black 1x 8m Offgridtec Connection cable from solar module to charge controller 1x 1,5m 10mm² Offgridtec battery cable with MIDI fuse holder - screw terminal connection on M8 1x 2.5m 10mm² Offgridtec Battery cable with MIDI fuse holder - screw terminal connection on M8 1x Offgridtec 60a 58v MIDI fuse & 1x Offgridtec 80a 58v MIDI fuse additional for 2 modules1x Offgridtec Jacks & 1x Dekalin Adhesive Ms-5 black The electronics core - the Votronic vbcs triple device combination The vbcs Triple ensures your permanent power supply in three ways. With the Pb mains charger with 30a you can charge your battery efficiently in standby mode from the mains. The VCC charging converter with 45a allows you to charge your on-board battery while driving. The third option offers the charging with solar energy with the help of the MPP solar regulator for max.350Wp.The supplied temperature sensor ensures the optimal charging of your batteries. PB mains charger:The powerful charging of the on-board battery and supply of the 12v consumers from the mains. The full charging power in the universal range of 110v/ac-230v/ac without switching is available worldwide even in case of large deviations of the mains supply (undervoltage/overvoltage, sinusoidal shape, frequency). Thanks to the long-term charging characteristics, the device can be constantly connected to the mains (operational, winter break) VCC charge converter:The powerful charge booster allows full charging of the on-board battery while driving. It increases/decreases the voltage to the required level so that the on-board battery can be charged with the optimal charging characteristic. It fully compensates for line losses and severe alternator voltage fluctuations, which are common in Euro 6 vehicles. The supplied 12v consumers are protected against overvoltage and voltage fluctuations. MPP solar controller:The MPP charge controller ensures a charge current gain of 10-30%, shorter charging times and the best possible power utilization of your solarasystem. The MPP technology automatically determines the maximum power output of the connected solar modules several times per second. The complete system also includes either the Charge Control s display or the vpc Jupiter 200 combination panel from Votronic. With both displays, the current output of the solarasystem can be reliably displayed, monitored and controlled. The Jupiter panel offers the additional options of a battery computer and water management. Highly efficient solar supply - the Offgridtec OlP 180w solar module The powerful 12v OlP solar module with innovative overlapping design delivers optimal power flow through minimized power losses and significantly higher module efficiency through better space utilization. The innovative PERC technology or backside passivation provides improved absorption at longer wavelengths, e.g. at flat irradiation angles or in cloudy conditions, and the potential loss in case of partial shading is reduced. The modern, homogeneous optics without visible conductor paths perfectly round off this high-quality module. power (Pmax): 180wp voltage (Vmp): 24.8V max. current (Imp): 7,26A Short circuit current (Isc): 7,84A max. system voltage: 600V/DC Weight: 11,54kg Dimensions: 680 x 1330 x 35 mm Optimal cabling - Manufactured in the Offgridtec cable manufactory The mTriple solarasystem is supplied, according to the Plug & Play principle, with all the connecting cables required for commissioning the system. The cables are all manufactured in our own cable factory and have an optimal connection quality. The 8m long connection cable from module to charge controller allows a flexible installation, depending on the conditions on site. The battery cables have an integrated MIDI fuse holder to protect the charge controller and the technology behind it in the event of a short circuit or overcurrent. The appropriate fuses for the system are also included. Mounting material included The complete system is delivered with all mounting material needed to mount it on your vehicle. The Dekalin adhesive set for bonding the solar modules to the vehicle roof contains, in addition to the white power adhesive, cleaning cloths, a wool wiper and the Dekavator bonding agent. The Offgridtec roof feed-through creates the connection between the solar module on the roof and the charge controller inside the vehicle. The version with two solar modules also contains a pair of junction boxes for parallel connection of the two modules. Individual adaptations As with all our complete systems, individual adaptations are possible. contact us! Please ask our customer service for possible costs.

The mTriple s solarasystems offer the ideal power supply for your motorhome or camper. The combination of the VBCs Triple from Votronic and the sPR solar module from Offgridtec provides a reliable power supply and optimum yields. The permanent supply is ensured in three different ways. Charging from the mains while stationary, while driving with the help of the charge booster, and the combination of solar module and MPPT charge controller in sunshine. The compact combination of the VBCs and the highly efficient solar module is ideal when installation space is limited. The system is not only suitable for self-sufficient standing and with the framed solar panel also predestined for use on expedition vehicles. Features of the mTriple s Average daily yield of 480Wh resp. 960Wh (March - October) Permanent power supply with 3 charging options Device combination of mains charger, charge booster and solar controller Suitable for all common battery types (lead-acid, agm, gel, lithium) Durable framed solar module - ideal for motorhome & camper installation With LCD display for monitoring system parameters Mounting hardware and cable package included All components perfectly matched quick and easy installation according to plug & play principle The mTriple s solaranlage contains: Offgridtec 120w/12v sPR high power solar panel (1x or 2x depending on selection) 1x Votronic 3242 VBCs 30/20/250 Triple-CI device combination 1x Votronic 1247 Charge Control s Display or 1x Votronic 5747 vpc Jupiter 100 Combi Panel 1x Offgridtec Roof bushing 1-fold for cable diameter 13mm-18mm black 1x Dekalin Dekasyl Ms-5 adhesive set black 1x 8m Offgridtec connection cable from solar module to charge controller 1x 1,5m 10mm² Offgridtec battery cable with MIDI fuse holder - screw terminal connection on M8 1x 2.5m 10mm² Offgridtec Battery cable with MIDI fuse holder - screw terminal connection on M8 1x Offgridtec 40a 58v MIDI fuse & 1x Offgridtec 50a 58v MIDI fuse additional for 2 modules 1x Offgridtec Junction box & 1x Dekalin Adhesive Ms-5 black The electronics core - the Votronic VBCs Triple device combination The VBCs Triple ensures your permanent power supply in three ways. With the Pb mains charger with 20a you can charge your battery efficiently in standby mode from the mains. The VCC charge converter with 30a allows you to charge your on-board battery while driving. The third option offers the charging with solar energy using the MPP solar regulator for max.250Wp.The supplied temperature sensor ensures the optimal charging of your batteries. Pb mains charger:The powerful charging of the on-board battery and supply 12V consumers from the mains. The full charging power in the universal range of 110v/ac-230v/ac without switching is available worldwide even with large deviations of the mains supply (under/over voltage, sinusoidal shape, frequency). Thanks to the long-term charging characteristics, the device can be constantly connected to the mains (operational, winter break) VCC charge converter:The powerful charge booster allows full charging of the on-board battery while driving. It increases/decreases the voltage to the required level so that the on-board battery can be charged with the optimal charging characteristic. It fully compensates for line losses and strong voltage fluctuations of the alternator, which are common in Euro 6 vehicles. The supplied 12V consumers are protected against overvoltage and voltage fluctuations. MPP solar regulator:The MPP charge controller ensures a charge current gain of 10-30%, shorter charging times and the best possible power utilization of your solaranlage. The MPP technology automatically determines the maximum power output of the connected solar modules several times per second. The complete system also includes either the Charge Control s Display or the vpc Jupiter 100 combination panel from Votronic. Both displays can be used to reliably display, monitor and control the current output of the solaransystem. The Jupiter panel additionally offers the possibilities of a battery computer and water management. Highly efficient solar supply - the Offgridtec sPR 120w solar module The monocrystalline 120w sPR is a high efficiency solar panel with back contacted high performance cells delivers a very high efficiency of almost 21% . The solar panel delivers a very good energy yield, even in low light conditions and is lighter and smaller than other mono modules with the same power output. The back-contact process, where only the pure cells are visible on the front side and the black aluminum frame also provide a noble appearance and are ideal for motor homes and campers. Power (Pmax): 120wp voltage (Vmp): 23,35V max. current (Imp): 6,05A Short circuit current (Isc): 6,41A max. system voltage: 600V/DC Weight: 6,5 kg Dimensions: 540 x 1055 x 35 mm Optimal cabling - Manufactured in the Offgridtec cable manufactory The mTriple solarasystem is supplied, in line with the plug & play principle, with all the connecting cables required for commissioning the system. The cables are all manufactured in our own cable factory and have an optimal connection quality. The 8m long connection cable from module to charge controller allows a flexible installation, depending on the conditions on site. The battery cables have an integrated MIDI fuse holder to protect the charge controller and the technology behind it in the event of a short circuit or overcurrent. The appropriate fuses for the system are also included. Mounting material included The complete system is delivered with all mounting material needed to mount it on your vehicle. The Dekalin adhesive set for bonding the solar modules to the vehicle roof contains, in addition to the white power adhesive, cleaning cloths, a wool wiper and the Dekavator bonding agent. The Offgridtec roof bushing is used to create the connection between the solar module on the roof and the charge controller inside the vehicle. The version with two solar modules also contains a pair of junction boxes for parallel connection of the two modules. Individual adaptations As with all our complete systems, individual adaptations are possible. contact us! Please ask our customer service for possible costs.