Battery Clamps
2 Results
Sorting
Top seller
8-01-002190
Battery Binding Post Set
- 1 x for plus pole and 1 x minus pole- material: brass
- 1 x for plus pole and 1 x minus pole- material: brass
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
8-01-012845
Offgridtec® battery quick clamp set battery pole quick connector plus minus
This set of Offgridtec battery quick clamps (mpn 012845) is ideal when you need to do things quickly and without tools. Once the leads are connected to these clamps, you can disconnect the battery from the vehicle or system with little effort and completely without tools, and reconnect just as quickly. So perfect for use in RV, boat or seasonal vehicles. The gold plating of the clamps ensures flawless current flow. The set includes one red (positive) and one blue (negative) clamp. The cable is attached with a screw terminal, these are designed for round conventional terminal batteries. Features Marking "+" and "-" on the terminals Diameter positive electrode: about 19mm / 0.75 inch Diameter negative electrode: approx. 17mm / 0.67 inch max. cable cross section: 60mm² Size: approx. 68 x 48 x 25 mm / 2.68 x 1.89 x 0.98 inch Scope of delivery: 1x battery quick clamp positive (red) 1x battery quick clamp negative (blue)
This set of Offgridtec battery quick clamps (mpn 012845) is ideal when you need to do things quickly and without tools. Once the leads are connected t...
Shipped in 1-3 days
Shipped in 1-3 days
Topseller
VAT-exempt delivery possible*
Top seller
8-01-005815
1.5m 6mm² MC4 Connection Cable Plug/Socket Extension
1.5m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The equipped MC4-connectors are as well German originals made by MultiContact. The final assembly of these cables takes place in our manufactory in Lower Bavaria.
This connection cable is fabricated with professional tools to ensure an extremely high tensile strength which resists even hardest conditions and constant environmental influences.
Application:
ideal for flexible connections of solar modules on different roof sides or module rows
for parallel connection of solar modules
Advantages:
Plug and Play - unpack and install - you do not need any professional tools
irradiated solar cable (only two producers worldwide provide this technology)
planning certainty thanks to a long manufacturer's warranty of 10 years
available in different lengths and colors and therefore suitable for nearly every task
Technical data:
cable type: Lapp Ölflex XLR-R 6mm² TÜV- and UL-certified
max. voltage: 1000V
length: 1.5m
equipped with 1x MC4 male + 1x MC4 female
1.5 Meter (€6.82* / 1 Meter)
Content: 1.5 Meter (€6.82* / 1 Meter)
1.5m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
Top seller
More versions available
8-01-013602
10m connection cable micro changeover switch with Betterie bc01 socket to earthed socket (plug angled)
The 10m Plug & Play Micro Inverter connection cable from Offgridtec (mpn 8-01-013602) connects your micro inverter (e.g.Envertech) with a standard grounded socket (Schuko). The cable is equipped with the Betteri bc01 socket part on the inverter side and an angled Schuko plug type f on the socket side. This cable is used for the connection between the micro inverter and your house power supply. special features of the P&P inverter connection cable Immediately ready for use since delivered as Plug & Play version technical features of the 5m Microinverter connection cable Offgridtec-Part number: 8-01-013602 Cable length: 10m Usage; Connection of compatible micro inverters to the house power grid via feed-in socket Cable type: heavy rubber cable H07RN-f 3x2,5 from Lapp-Kabel Connector on socket side: Schuko plug type-f angled Connector on inverter side: Betteri bc01 socket compatible micro inverters EVT Inverter Series from Envertech evt300s / evt560s / EVT1200S TSUN tsol M350/M800 Bosswerk mi300 / MI600 Hoymiles mi-300 / MI-600 a.o. (e.g. Huayu) Scope of delivery: 1x Offgridtec 8-01-013602 10m plug & play connection micro inverter to power outlet
Variants from €44.90*
10 Meter (€5.49* / 1 Meter)
Content: 10 Meter (€5.49* / 1 Meter)
The 10m Plug & Play Micro Inverter connection cable from Offgridtec (mpn 8-01-013602) connects your micro inverter (e.g.Envertech) with a standard...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
Top seller
8-01-005785
1m 6mm² MC4 Connection Cable Plug/Socket Extension
1m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp the leading cable producer in Germany.The equipped MC4-connectors are as well German originals made by MultiContact. The final assembly of these cables takes place in our manufactory in Lower Bavaria.
This connection cable is fabricated with professional tools to ensure an extremely high tensile strength which resists even hardest conditions and constant environmental influences.
Application:
ideal for flexible connections of solar modules on different roof sides or module rows
for parallel connection of solar modules
Advantages:
Plug and Play - unpack and install - you do not need any professional tools
irradiated solar cable (only two producers worldwide provide this technology)
planning certainty thanks to a long manufacturer's warranty of 10 years
available in different lengths and colors and therefore suitable for nearly every task
Technical data:
cable type: Lapp Ölflex XLR-R 6mm² TÜV- and UL-certified
max. voltage: 1000V
length: 1m
equipped with 1x MC4 male + 1x MC4 female
1m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp the leading cable producer in Germany.The eq...
Soon available again
Soon available again
Top seller
8-01-004950
2,5mm² standard flat fuse holder incl. cable
This fuse holder is fully insulated, the housing is made of rubber, or fully potted. The fuse is additionally protected from corrosion by the cover. The holder is suitable for trucks, cars and much more. You can protect electronic components quickly and easily against overvoltages. You can find suitable flat fuses in our assortment.suitable for truck, car and 12v / 24v solar systems.Technical details:Rated current: max. 20ALxWxH 40x17x45mmTotal length: 25cmsplash water protected by rubber capHousing and cover made of solid rubberfor standard atc / car fusesCable cross section: approx. 2,5mm²/AWG14non-slip surface, therefore easy to open even when wetScope of delivery:1 holder without fuse
0.25 Meter (€7.16* / 1 Meter)
Content: 0.25 Meter (€7.16* / 1 Meter)
This fuse holder is fully insulated, the housing is made of rubber, or fully potted. The fuse is additionally protected from corrosion by the cover. T...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
Top seller
8-01-005795
2m 6mm² MC4 Connection Cable Plug/Socket Extension
2m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The equipped MC4-connectors are as well German originals made by MultiContact. The final assembly of these cables takes place in our manufactory in Lower Bavaria.
This connection cable is fabricated with professional tools to ensure an extremely high tensile strength which resists even hardest conditions and constant environmental influences.
Application:
ideal for flexible connections of solar modules on different roof sides or module rows
for parallel connection of solar modules
Advantages:
Plug and Play - unpack and install - you do not need any professional tools
irradiated solar cable (only two producers worldwide provide this technology)
planning certainty thanks to a long manufacturer's warranty of 10 years
available in different lengths and colors and therefore suitable for nearly every task
Technical data:
cable type: Lapp Ölflex XLR-R 6mm² TÜV- and UL-certified
max. voltage: 1000V
length: 2m
equipped with 1x MC4 male + 1x MC4 female
2 Meter (€5.60* / 1 Meter)
Content: 2 Meter (€5.60* / 1 Meter)
2m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The e...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
Top seller
8-01-001310
2m Solar Profile Rail 4x4cm aluminium - sold by the meter
For a quick and easy installation of solar modules. These rails can be used for all common module types for flat roofs, pitch roofs or field systems.
Length: 1mMaterial: aluminiumUpper mounting channel: solar sliding block M8 Slot 8Lower mounting channel: hex bolt / t-head bolt (DIN 933 M10)Dimensions: 4x4cm
These profiles are compatible with all installation equipment we offer.
As they are used for substructures these profile might have some slight scratches on the surface.
Note:Because of delivery costs these rails are normally delivered with a max. length of 2m. If a longer rail is needed (max. 6.1m) please contact us.
Alternatively it is possible to connect several profile rails with rail connectors until the needed length is reached. These connectors are alsoavailable in our shop.
For a quick and easy installation of solar modules. These rails can be used for all common module types for flat roofs, pitch roofs or field systems.
...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
Top seller
8-01-001325
2m Solar Profile Rail 4x4cm aluminium (upside sliding block)
Profile rails for quick and easy mounting of solar modules. Suitable for all common module types on flat and pitched roofs as well as for ground-mounted systems.PropertiesLength per article: 1.5 mMaterial: aluminumMounting channel top: solar slot stone m8 slot 8Mounting channel bottom: hexagon screw din 933 M10Dimensions: 40 x 40 mmOur offered solar profiles are compatible with our offered solar fasteners.These profiles are intended for a substructure and may therefore have scratches on the surface.Notice: By means of the rail connectors available from us, several solar profiles can be connected together to achieve the desired length.Scope of delivery:1x 1.5m solar profile rail
1.25 Meter (€19.92* / 1 Meter)
Content: 1.25 Meter (€19.92* / 1 Meter)
Profile rails for quick and easy mounting of solar modules. Suitable for all common module types on flat and pitched roofs as well as for ground-mount...
Shipped in 2-5 days
Shipped in 2-5 days
VAT-exempt delivery possible*
Top seller
8-01-001320
2m Solar Profile Rail 4x4cm aluminium (upside sliding block)
Profile rails for quick and easy mounting of solar modules. Suitable for all common module types on flat and pitched roofs as well as for ground-mounted systems.PropertiesLength per article: 1.5 mMaterial: aluminumMounting channel top: solar slot stone m8 slot 8Mounting channel bottom: hexagon screw din 933 M10Dimensions 40 x 40 mmOur offered solar profiles are compatible with our offered solar fasteners.These profiles are intended for a substructure and may therefore have scratches on the surface.Notice: By means of the rail connectors available from us, several solar profiles can be connected together to achieve the desired length.Scope of delivery:1x 1.5m solar profile rail
1.5 Meter (€19.93* / 1 Meter)
Content: 1.5 Meter (€19.93* / 1 Meter)
Profile rails for quick and easy mounting of solar modules. Suitable for all common module types on flat and pitched roofs as well as for ground-mount...
Shipped in 2-5 days
Shipped in 2-5 days
Top seller
8-04-001170
2x Battery Pole Adaptors with external thread M8
Battery pole adaptor (+ and -) with external thread for batteries with M8 internal thread
Suitable for Westech Gel batteries 100Ah and 200Ah as well as for batteries with M8 internal thread if you prefer to use a roundpole instead of a M8 bolt.
Pole adaptor set with various connection possibilities for batteris with internal thread to normal pole.
Perfect for caravan and boat owners, yacht sportsman, DIY people and solar systems
Product features:
- M8 external thread
- universal use
- for + and -
- for 6 and 12V batteries
- very robust through high-quality production
- very good conductivity
- Material: Copper with silver alloy
Battery pole adaptor (+ and -) with external thread for batteries with M8 internal thread
Suitable for Westech Gel batteries 100Ah and 200Ah as well a...
Shipped in 1-3 days
Shipped in 1-3 days
VAT-exempt delivery possible*
Top seller
8-01-013755
35mm End Clamp for Solar Modules
With 4 end clamps modules can be mounted on profile rails.
Features:
material: aluminuium
opening for M8 screws
frame height of 35mm
dimensions: 70 x 30 x 39mm
With 4 end clamps modules can be mounted on profile rails.
Features:
material: aluminuium
opening for M8 screws
frame height of 35mm
dimensions...
Shipped in 1-3 days
Shipped in 1-3 days
Battery Clamps
Are you wondering how to connect your car battery safely and professionally? With the battery clamps from Offgridtec, you are ideally equipped to reliably wire and connect all types of batteries to consumers.
What is a battery clamp?
Battery terminals are small metal devices used to securely connect a battery to a battery cable leading to loads or charging sources. They are an important component in any electrical system and are used to ensure a safe, reliable connection between a battery and the device it powers. They also provide a secure connection to the battery terminals, prevent accidental disconnection and provide maximum protection against voltage spikes and reverse polarity.
Battery clamps with cable, fuse and quick release fastener
At Offgridtec, we know how important it is to have the right battery clamps to keep your battery safe. That's why we have a wide range of battery clamps for you:
- Battery clamps with cable are designed for the safe connection of vehicle batteries to electrical systems.
- Battery clamps with a fuse provide additional protection for the battery.
- Quick-release clamps (battery clamps with quick-release fastener) are optimal when things have to be done quickly and without tools.
By the way: Our battery clamps are available in both a 12V and 24V version, so you can find the perfect option for your battery.
Buy matching battery clamps/terminal clamps online at Offgridtec
Battery clamps are a valuable battery accessory for anyone who needs to safely connect a battery to a battery cable. Whether you are looking for a battery clamp for a car, motorbike, boat or PV system, Offgridtec has the perfect product for you.
Whether you have questions or need help, our team is here for you. Simply contact us by phone on +49 8721 91994-00 or send an email to [email protected]
FAQ
- Are terminal clamps and battery clamps the same thing? Battery terminals have two poles (plus and minus), which is why they are also called pole terminals. They are an important electrical connection element used to connect cables to individual contacts of electrical devices or assemblies.
- Where can I find battery terminals with cables? Battery cables with terminals are sold by various specialist dealers. Offgridtec is one of the leading suppliers on the market here. In our online shop, you will find a wide range of wiring, battery terminals and other important battery accessories that you can use to ensure the durability and correct functioning of your battery.
- When do I need to disconnect my car battery? If you leave your car unused for a long period of time, disconnecting the battery is essential to protect your power storage - especially during the cold winter months.
- How do I disconnect a car battery correctly? Before disconnecting the car battery, make sure that the vehicle is switched off. First remove the negative terminal (black cable) with a suitable spanner. Once the negative cable is no longer in contact with the battery, you can disconnect the positive terminal (red cable). Make sure to wrap the positive pole in a cloth before laying it on its side so that it is no longer connected to the battery.