The pcb-etfe 50w 39v from Offgridtec (mpn 3-01-010830) belongs to the latest generation, semi-flexible solar panels. The pcb-etfe class sets new standards in stability and reliability by the composition of highest quality materials. While the front side is based on the Teflon derivative (ptfe), the back side is made of fiberglass (pcb). The module works with modern 3-busbar technology. These and other quality features make the pcb-etfe 50w from Offgridtec a universally applicable product of the upper class that feels just as comfortable on boats as on vehicle roofs or other surfaces and combines stability, maximum reliability and performance like no other. Thanks to its high operating voltage of 39v, it is ideally suited for 24v systems or 12v systems (12v only in conjunction with mppt charge controllers that can handle a corresponding maximum module voltage). The pcb-etfe 50w 12v solar cell is flexible and, compared to normal flexible solar cells, can also be walked on without hesitation when fully bonded. Technical characteristics pcb-etfe 50w 39v solar panel 50w rated power, high efficiency and 3-busbar technology equipped with monocrystalline A-grade solar cells higher heat tolerance compared to tpt modules thanks to PCB backsheet, thus less susceptible to bubble formation due to inadequate bonding walkable and even in wet condition more slip resistant than comparable solar modules on the market semi-flexible - can be bent up to a maximum of 18 degrees (lengthways) easy mounting of the solar panel by gluing or using the ring eyelets unrestrictedly suitable for salt water, universally applicable etfe High-Tec plastic ensures weight saving and at the same time a high light transmission of max. 96% Junction box with high protection class IP67 easy installation thanks to pre-assembled solar cable with mc4 plug and socket proven Offgridtec quality: manufactured exclusively from premium raw materials of the highest quality grade etfe high-tech plastic on the front side The front side of the solar panel is covered with a high-tech plastic layer based on ethylene-tetrafluoroethylene copolymer etfe - a teflon derivative (ptfe) - and offers excellent protection against harmful environmental influences and is also suitable for use in salt water. etfe is lighter and at the same time more translucent than other plastic solutions on the market.   Extremely stable fiberglass (pcb) backing plate as backside The fiberglass (pcb) backing makes the module much more stable than conventional panels with tpt backing. This structure offers you the following advantages: prevents bubbling that can occur with tpt modules due to incorrect bonding tolerates higher temperatures compared to tpt assembly reduces the risk of cell breakage due to accidental over-bending of the panel by the user Technical features pcb-etfe 50w 36v solar panel Working voltage (Vmp): 39,6 V Open circuit voltage (Voc): 46,61 V max. current (Imp): 1,26 A Short circuit current (Isc): 1,36 A max. system voltage: 200 V Dimensions: 510 x 590 x 3 mm Weight: 2,5 Kg Part number: 3-01-010830 Application areas of the Offgridtec pcb-etfe series can be used without restrictions in the marine sector best suitable for mounting on motorhome, bus and other vehicles for installation on rounded sheet metal roofs recommended for all systems where highest reliability and performance are required ideally suited for suspension e.g. tents when camping, due to the PCB carrier layer the ring eyelets also withstand very high mechanical loads about the pcb-etfe series This product is the result of accumulated experience from thousands of installations in every imaginable field of application. Already 5 years ago we were able to successfully establish our first series of flexible solar cells on the market and since then we have continuously developed and optimized our modules. With the pcb-etfe series, you benefit from this unique expertise and can look forward to a durable product that will reliably produce electricity for many years. Scope of delivery: Offgridtec 3-01-010830 pcb-etfe 50w 39v semi-flexible solar panel    

The Offgridtec 010905 etfe spr-f 165w is a semi-flexible high power solar cell that is ideally suited as a solar panel for the motorhome, as well as specifically for marine use on sailing yachts, motor yachts and other types of boats. The module is best suited for 12v system voltage, in conjunction with an MPPT charge controller. The etfe 165w 12v solar cell is flexible and can also be walked on without hesitation when fully bonded. The surface of the plastic solar glass made of etfe is slightly corrugated which makes it walkable even when wet. etfe, high-tech plastic solar glass combined with spr high-performance cells The front side of the solar panel is covered with a high-tech plastic layer based on ethylene-tetrafluoroethylene copolymer etfe - a Teflon derivative (ptfe) - and offers excellent protection against harmful environmental influences and is also suitable for use in salt water environments. etfe is lighter and at the same time more translucent than other plastic solutions on the market. Technical characteristics of etfe spr-f 165w solar module 165w rated power at an operating voltage of 27.3v and a current of 6.05A walkable and even in wet condition more slip resistant than comparable solar modules on the market semi-flexible - bendable up to a maximum of 30 degrees easy mounting of the solar panel by gluing or using the ring eyelets specially designed for long-term marine use etfe High-Tec plastic ensures weight saving and at the same time high light transmission of max. 96% Junction box with IP65 protection easy installation thanks to pre-assembled solar cable with mc4 plug and socket small dimensions (LxWxH): 1460 x 540 x 2mm Mounting of the solar panel by gluing or using the ring eyelets Manufacturer part number (mpn): 010905 light weight: only 3 Kg proven Offgridtec quality: made exclusively from premium raw materials of the highest quality grade Scope of delivery: Offgridtec 3-01-010905 etfe spr-f 165w 27v solar panel flexible

The pcb-etfe 100w 39v from Offgridtec (mpn 3-01-010835) belongs to the latest generation, semi-flexible solar panels. The pcb-etfe class sets new standards in stability and reliability by the composition of highest quality materials. While the front side is based on Teflon derivative (ptfe), the back side is made of fiberglass (pcb). In addition, the module works with modern 3-busbar technology. These and other quality features make the pcb-etfe 100w from Offgridtec a universally applicable product of the upper class that feels just as comfortable on boats as on vehicle roofs or other surfaces and combines stability, maximum reliability and performance like no other. Thanks to its high operating voltage of 39,6v, it is ideally suited for 24v systems or 12v systems (12v only in conjunction with mppt charge controllers that can handle a corresponding maximum module voltage). The pcb-etfe 100w 12v solar cell is flexible and, compared to normal flexible solar cells, can also be walked on without hesitation when fully bonded. Technical characteristics pcb-etfe 100w 36v solar panel 100w rated power, high efficiency and 3-busbar technology equipped with monocrystalline A-grade solar cells higher heat tolerance compared to tpt modules thanks to PCB backsheet, thus less susceptible to bubble formation due to poor adhesion walkable and even in wet condition more slip resistant than comparable solar modules on the market semi-flexible - can be bent up to a maximum of 18 degrees (longitudinally) easy mounting of the solar panel by gluing or using the ring eyelets unrestrictedly suitable for salt water, universally applicable etfe High-Tec plastic ensures weight saving and at the same time a high light transmission of max. 96% Junction box with high protection class IP67 easy installation thanks to pre-assembled solar cable with mc4 plug and socket proven Offgridtec quality: manufactured exclusively from premium raw materials of the highest quality grade etfe high-tech plastic on the front side The front side of the solar panel is covered with a high-tech plastic layer based on ethylene-tetrafluoroethylene copolymer etfe - a teflon derivative (ptfe) - and offers excellent protection against harmful environmental influences and is also suitable for use in salt water. etfe is lighter and at the same time more translucent than other plastic solutions on the market.   Extremely stable fiberglass (pcb) backing plate as backside The fiberglass (pcb) backing makes the module much more stable than conventional panels with tpt backing. This structure offers you the following advantages: prevents bubble formation, which can occur with tpt modules due to incorrect bonding tolerates higher temperatures compared to tpt assembly reduces the risk of cell breakage due to accidental over-bending of the panel by the user Technical features pcb-etfe 100w 39,6v solar panel Working voltage (Vmp): 39,6 V Open circuit voltage (Voc): 46.61 V max. current (Imp): 2,53 A Short circuit current (Isc): 2,73 A max. system voltage: 200 V Dimensions: 845 x 680 x 3 mm Weight: 3,8 Kg Part number: 3-01-010835 Applications of the Offgridtec pcb-etfe series can be used without restrictions in the marine sector best suitable for mounting on motorhome, bus and other vehicles for installation on rounded sheet metal roofs recommended for all systems where highest reliability and performance are required ideally suited for suspension e.g. tents when camping, due to the PCB carrier layer the ring eyelets also withstand very high mechanical loads about the pcb-etfe series This product is the result of accumulated experience from thousands of installations in every imaginable field of application. Already 5 years ago we were able to successfully establish our first series of flexible solar cells on the market and since then we have continuously developed and optimized our modules. With the pcb-etfe series, you benefit from this unique expertise and can look forward to a durable product that will reliably produce electricity for many years. Scope of delivery: Offgridtec 3-01-010835 pcb-etfe 100w 39v semi-flexible solar panel

The pcb-etfe 200w solar panel from Offgridtec (mpn 3-01-018415) sets new standards with high-quality materials such as Teflon derivatives at the front, fiberglass at the rear and 11-busbar technology. It is semi-flexible and ideal for 24V systems with an operating voltage of over 30.8v. For 12V systems, mppt charge controllers are required that can handle higher module voltages. These and other quality features make the pcb-etfe 200w from Offgridtec a universally applicable top-class product that feels just as at home on boats as it does on vehicle roofs or other surfaces and combines stability, maximum reliability and performance like no other. This is the improved version of our 200w 39v module (mpn 3-01-010845). This new version offers a lower operating voltage, while the maximum current and short-circuit current have been increased, which indicates an increased efficiency and performance of the module. In the new version, the solar modules are equipped with both improved solar cells and 11 busbars, which leads to improved light absorption and reduces the effect of partial shading. Features of the pcb-etfe 200w 30.8v solar panel Equipped with monocrystalline A-grade solar cells Cell efficiency of over 22.3% 11-busbar technology PCB backsheet Walkable and even more slip-resistant than comparable solar modules, even when wet Semi-flexible - can be bent up to a maximum of 18 degrees (lengthwise) Easy installation of the solar panel by gluing or using the eyelets High light transmission of max. 96% Pre-assembled solar cable with mc4 plug and socket Proven Offgridtec quality Application areas of the Offgridtec pcb-etfe series can be used without restriction in the marine sector ideally suited for mounting on motorhomes, buses and other vehicles for installation on rounded sheet metal roofs recommended for all systems where maximum reliability and performance are required ideally suited for suspending tents when camping, for example, the ring eyelets can also withstand very high mechanical loads thanks to the PCB carrier layer etfe high-tech plastic on the front The front of the solar panel is covered with a high-tech plastic layer based on ethylene tetrafluoroethylene copolymer etfe - a Teflon derivative (ptfe) - and offers excellent protection against harmful environmental influences and is also suitable for use in salt water. etfe is lighter and at the same time more translucent than other plastic solutions on the market. Extremely stable fiberglass (pcb) backing plate The fiberglass (pcb) backing makes the module significantly more stable than conventional panels with a TPT backing. This structure offers you the following advantages: prevents bubble formation, which can occur with TPT modules due to incorrect bonding tolerates higher temperatures compared to the TPT structure reduces the risk of cell breakage due to accidental overbending of the panel by the user about the pcb-etfe series This product is the result of accumulated experience from thousands of installations in every conceivable application. We successfully established our first series of flexible solar cells on the market 5 years ago and have been continuously developing and optimizing our modules ever since. With the pcb-etfe series, you benefit from this unique expertise and can look forward to a durable product that will reliably produce electricity for many years to come. Technical data Generator output: 200 Wp Working voltage (Vmp): 30.8 V Open-circuit voltage (Voc): 36.0 V max. current (Imp): 6.50 A Short-circuit current (Isc): 6.82 A max. system voltage: 200 V Power tolerance: +/- 3% Operating temperature: -40 to +85°C Protection class: IP67 Cells per module: 3 x 18 Size of the cells: 182 x 91mm Module dimensions: 1770 x 595 x 3mm Weight: 5.02 kg Scope of delivery: Offgridtec 3-01-010845 pcb-etfe 200w 30.8v semi-flexible solar panel

The Offgridtec 010895 etfe spr-f-100 V2 120w is a semi-flexible high power solar cell that is ideally suited as a solar panel for the motorhome, as well as specifically for marine use on sailing yachts, motor yachts and other types of boats. The module is best suited for 12v system voltages. The etfe 120w 12v solar cell is flexible and compared to the standard 120 watt flex solar panel, it can also be walked on without hesitation when fully bonded. The surface of the plastic solar glass made of etfe is slightly corrugated which makes it walkable even when wet.   etfe high-tech plastic solar glass combined with spr high-performance cells The front side of the solar panel is covered with a high-tech plastic layer which is based on ethylene-tetrafluoroethylene copolymer etfe - a teflon derivative (ptfe) - and offers excellent protection against harmful environmental influences and is also suitable for use in salt water. etfe is lighter and at the same time more translucent than other plastic solutions on the market. Together with the installed spr (Sunpower) high-performance cells from American production, these two components form an optimal basis for a marine solar panel of the upper class.   technical features of the etfe spr-f-100 v2 120w solar panel 120w rated power with operating voltage of 19,8v and current of 6,07A walkable and even in wet condition more slip resistant than comparable solar modules on the market semi-flexible - bendable up to a maximum of 30 degrees easy mounting of the solar panel by gluing or using the ring eyelets specially designed for long-term marine use etfe High-Tec plastic ensures weight saving and at the same time high light transmission of max. 96 equipped with market-leading high-performance solar cells from Sunpower for maximum efficiency Junction box with IP65 protection easy installation thanks to pre-assembled solar cables with mc4 plug and socket small dimensions (LxWxH): 1070 x 540 x 2mm Mounting of the solar panel by gluing or using the ring eyelets Manufacturer part number (mpn): 010895 light weight: only 2,08 KG proven Offgridtec quality: made exclusively from premium raw materials of the highest quality grade about the etfe series The Offgridtec etfe solar panel series consists of a total of 7 modules in the power range from 20w to a maximum of 150w. More information about the technical characteristics of etfe series can also be found in the official brochure. Scope of delivery: Offgridtec 3-01-010895 etfe spr-f-100 V2 120w 12v solar panel flexible