Mastervolt

52 Results

Sorting

Mastervolt Charge Mate 1202 battery separator relay

A secondary battery is becoming increasingly common. As a second battery can prevent the main battery from depleting and being unable to start, this seems like a safe and reliable solution. The second battery, however, also has to be charged regularly. The Charge Mate series connects both batteries during charging and keeps them isolated when discharging. The Charge Mate 1202 and 2502 are especially practical for small systems.

€86.45*

A secondary battery is becoming increasingly common. As a second battery can prevent the main battery from depleting and being unable to start, this s...

Shipped in 1-3 days

VAT-exempt delivery possible*

Mastervolt SCM25 MPPT 25A 12V 24V Solar Charge Controller

The SCM25 MPPT is Mastervolt’s smallest MPPT charge regulator and just as powerful as its big brother. With 200 to 700 Wp in solar panels, switchable output and buzzer, this Solar ChargeMaster is very well suited to small and medium systems. The innovative technology in the Mastervolt MPPT charge regulators increases the efficiency of the solar panels. The SCM25 MPPT charges your batteries up to 30% faster than PWM regulators – with the same number of panels.MPPT charge regulator for all solar panelsBesides the traditional 36 and 72-cell panels, the SCM25 MPPT is also ideal for the inexpensive 60-cell panels. The high PV voltage makes it possible to connect several panels in series, significantly reducing the required cable length, installation time and power loss in solar cables. Easy to use, safe and flexibleThe SCM25 MPPT is suitable for all battery types, including Mastervolt Lithium Ion. The charging profiles for all types of batteries are pre-programmed and can be selected at the push of a button. The SCM25 MPPT is quiet and equipped with a very user-friendly, clear display. Built-in protection against overload, high/low battery voltage, overheating, short circuits and reverse polarity ensures that safety comes first. Moreover, the SCM25 MPPT has a robust casing and is protected against condensation in conformity with IP23. Very high efficiency for faster charging. Stable, accurate Mastervolt Maximum Power Point Tracker. Up to 30% faster charging compared with PWM technology. Suitable for inexpensive 60-cell panels. Capacity for solar panel configurations from 200 to 700 Wp. Suitable for all battery types, including Mastervolt Lithium Ion. Automatic 12/24 V detection. Flexible charging characteristics. Battery temperature sensor for long lifespan. Large and bright display. Secure switchable output. Safe operation, audio signal in case of malfunctions. Very quiet operation. Robust casing, suitable for humid environments (IP23).

€230.16*

The SCM25 MPPT is Mastervolt’s smallest MPPT charge regulator and just as powerful as its big brother. With 200 to 700 Wp in solar panels, switchable ...

Shipped in 1-3 days

Mastervolt ChargeMaster 12/25-3 12V 25A - charger for 3 battery bangs

Power you can rely on 3-Step+ charging technology for fast and complete charging. Safe and complete charging due to standard safety features. Memory function prevents overcharging in case of an unstable power supply. Clear control panel. Easy to install. Built-in system functionality (MasterBus) in combination with other Mastervolt products. Always on course with Mastervolt…Mastervolt ensures you an electrical system with no weak links and a dependable and silent power supply. Whether for recreational or professional purposes, with Mastervolt you always have power you can rely on... The power to be independent.ChargeMaster battery chargersMake the most of your batteries with the ChargeMaster, plugging in and charging anywhere in the world. Mastervolt’s ChargeMaster guarantees fast and complete charging of your batteries no matter where you are. The ChargeMaster can charge multiple battery banks simultaneously thanks to its combined functionality. Moreover, all ChargeMasters can be easily connected to a MasterBus network with only one cable and one connection. You also have the option of central, local or remote monitoring, configuration and control of your system. The ChargeMaster is available in various models to guarantee you the ideal battery charger for any situation and demand. Charging your batteries with every voltageThe Mastervolt ChargeMaster supplies a maximum capacity wherever you are via auto-ranging. Auto-ranging ensures perfect fully automatic operation anywhere in the world, regardless of the available mains voltage (90-265 V AC, 50 or 60 Hz). The 3-step+ charging technology guarantees fast and complete charging, while the cos phi 1 regulation gets the most out of limited generator capacity.Sturdy connectionsMetal-on-metal fitting gives a firm connection, and prevents corrosion or overheating of contact surfaces.Charging multiple battery banksThe ChargeMaster series has three equal charge outputs. Those of the smaller ChargeMaster models are pre-installed with two metres of cable for a plug & play solution, while the heavier models have one full output (for example for your service battery) and two outputs of 10 A, ideal for your starter batteries.

€365.64*

Power you can rely on 3-Step+ charging technology for fast and complete charging. Safe and complete charging due to standard safety features...

Shipped in 1-3 days

Mastervolt USB Interface for the SCM Charge Controller series

Together with DataControl software for Solar ChargeMaster this USB-interface ensures a faultless communication between your PC and the Solar ChargeMaster. The ChargeMaster software provides a full overview of all relevant data and allows the configuration of ChargeMaster - considering all possible adjustments a great help compared to configuration via the buzzer. full evaluation and analysis of all data compatible with Mastervolt SMC 20 and SMC 40 many possible configurations of your charge controller via the Mastervolt DataControl software software-download for free Learn more about all possible adjustments and functions in the manual

€90.82*

Together with DataControl software for Solar ChargeMaster this USB-interface ensures a faultless communication between your PC and the Solar ChargeMas...

Shipped in 1-3 days

Tip

Mastervolt ChargeMaster 12/15-2 12V 15A Battery Charger for two Battery Banks

€222.55*

Power you can rely on 3-Step+ charging technology for fast and complete charging. Safe and complete charging due to standard safety features...

Soon available again

Mastervolt BI 702-S 70A 12V 24V Heavy-Duty battery separator diode

Mastervolt’s BI battery isolators are based on conventional diode technology. The diode voltage drop (ca. 0.6 V) can be compensated for by adapting the output voltage of the connected charger or alternator. Mastervolt battery chargers and Alpha Pro MB charge regulators come as standard with automatic voltage drop compensation.Compact and lightweightThe Mastervolt BI battery isolators are compact and fully solid state, preventing wear. The weight varies from 580 to 1300 grams.Robust and durableCompletely corrosion-proof material with aluminium heat sinks. The electronic components are encased in synthetic materials, the BI models have molded diode splitters.Fast installationThe composite end plates feature connection lugs and solid bolt connections with nuts and locking rings to ensure easy installation.

€83.45*

Mastervolt’s BI battery isolators are based on conventional diode technology. The diode voltage drop (ca. 0.6 V) can be compensated for by adapting th...

Shipped in 1-3 days

Mastervolt ChargeMaster 12/35-3 12V 35A - charger for 3 battery banks

€540.86*

Power you can rely on 3-Step+ charging technology for fast and complete charging. Safe and complete charging due to standard safety features...

Shipped in 1-3 days

VAT-exempt delivery possible*

Mastervolt SCM 60 MPPT-MB 60A 12V 24V 48V Solar Charge Controller

The SCM60 MPPT-MB is Mastervolt’s largest MPPT solar charge regulator. With 600 to 3600 Wp in solar panels, connections for 12, 24 and 48-volt battery banks and an integrated MasterBus connection, this Solar ChargeMaster is perfect for large and medium-sized systems.The innovative technology in the Mastervolt MPPT charge regulators increases the efficiency of the solar panels. The SCM60 MPPT-MB charges your batteries up to 30% faster than PWM regulators – with the same number of panels.MPPT charge regulator for all solar panels Besides the traditional 36 and 72-cell panels, the SCM60 MPPT-MB is also ideal for the inexpensive 60-cell panels. A maximum input voltage of 145 V makes it possible to connect several panels in series, reducing the required cable length, installation time and power loss significantly.Robust, easy to use, safe and flexible The SCM60 MPPT-MB is suitable for all battery types, including Mastervolt Lithium Ion. The charging profiles for all types of batteries are pre-programmed and can be selected via the display or via MasterBus. The SCM60 MPPT-MB is very quiet and equipped with a clear and user-friendly display. The built-in protection against overload, high/low battery voltage, overheating, short circuits and reverse polarity ensures that safety comes first. Moreover, the SCM60 MPPT-MB has a sturdy casing and is protected against water spray in conformity with IP23.The smart logic of MasterBusThe MasterBus platform brings advanced system functions within reach and makes it possible to follow a complete energy system on a single display. The intelligent one-cable system simplifies the cabling, allowing valuable savings in space and weight. What’s more, you can automate your systems and adapt them to your needs. Architects, builders and contractors also benefit, as there is less material, less work and less fiddling, while testing is easy. There is also a choice of ten languages. The user interface is identical for all Mastervolt products, whether battery chargers, inverters, Combis, batteries or other devices.More comfort and independenceUse the power of MasterBus to switch on your water heater as soon as the battery is fully charged. Or link the Solar ChargeMaster via MasterBus to a Mastervolt Lithium Ion battery, removing the need for the disconnect relays usually required for this type of battery. The possibilities are endless. Very high efficiency for faster charging of the batteries Stable, accurate Mastervolt Maximum Power Point Tracker Up to 30% faster charging compared with PWM technology. Designed for inexpensive 60-cell panels. Capacity for solar panel configurations from 600 to 3600 Wp. Automatic 12/24/48 V detection. Flexible charging characteristics. Battery temperature sensor for long lifespan. Suitable for all battery types, including Mastervolt Lithium Ion. No need for Lithium Ion safety relay. Monitoring and control via MasterBus. Large and bright display. Safe, very quiet operation. Robust casing, suitable for humid environments (IP23)

€636.17*

The SCM60 MPPT-MB is Mastervolt’s largest MPPT solar charge regulator. With 600 to 3600 Wp in solar panels, connections for 12, 24 and 48-volt battery...

Shipped in 10-14 Werktage

Mastervolt Battman Pro Battery Monitor

Battery monitor, 12/24 V DC with large, splash proof display (IP65) and power bar. Displays remaining time and stores special battery status events. An affordable battery monitor that does exactly that: providing critical information about the status of your battery bank under all circumstances. Moreover it will warn you when your battery bank is empty. Also displays the remaining time until your battery needs to be charged and stores special battery status events.

€201.46*

Battery monitor, 12/24 V DC with large, splash proof display (IP65) and power bar. Displays remaining time and stores special battery status events. ...

Shipped in 1-3 days

Mastervolt Easy Charge 10A Battery Charger waterproof IP68

The fixed-mount, waterproof units are fully sealed in an epoxy-filled, non-corrosive enclosure, and built to IP68 waterproofing standards, easily meeting global regulations like CE, CSA, CEC, and ABYC. The outputs are completely isolated, and can be used in either series or parallel for higher voltage or current, including 12 or 24 V outputs. Highly efficient and simple to use, these chargers are designed for harsh environments, and are fully salt, shock and vibration tested. Currently, 6 A single bank and 10 A dual bank types models are available. A key feature is the ‘sense and send’ technology, which allows the chargers to detect which batteries need the most charge and prioritise accordingly. The battery chargers have the ability to charge wet, AGM and gel batteries, with a universal input (120-230 V) for total worldwide freedom. Spark free. Reverse polarity protected. Short circuit proof. Waterproof. Charges and maintains 12 V and 24 V (10 A model) wet, AGM and gel batteries. Fast charging, extends battery life. Sense-Send™ technology (only 10 A model). Wide input voltage range (90-265 V AC).

€147.69*

The fixed-mount, waterproof units are fully sealed in an epoxy-filled, non-corrosive enclosure, and built to IP68 waterproofing standards, easily meet...

Shipped in 1-3 days

Mastervolt BI 703 70A 12V 24V Heavy-Duty battery separator diode for 3 batteries

€110.10*

Mastervolt’s BI battery isolators are based on conventional diode technology. The diode voltage drop (ca. 0.6 V) can be compensated for by adapting th...

Shipped in 1-3 days

Mastervolt Battery Mate 2503 IG 250A charge distributor

While battery isolators are conventional diode splitters, the Battery Mate’s technology is electronic and includes mosfets (transistors). Its components compensate for the voltage drop and ensure that charging continues at the right voltage level, even with several battery banks. The Battery Mate is compatible with any type of alternator/battery charger, in both existing and new systems. As the voltage loss between the alternator and battery is negligible, the Battery Mate performs far better than conventional battery isolators. This ensures fast and complete charging of your batteries without having to make additional adjustments to the alternator.Charging two or three batteries at high capacity The Battery Mate is most suitable for charging multiple batteries, possibly with various brands of alternators, even if their charge voltage cannot be adjusted. It can charge two or three batteries with a very high yield and without voltage loss. Models 1602/1603 are suitable for alternators with a maximum charge current of 160 amp, the Battery Mate 2503 is ideal for alternators with a maximum charge current of 250 amp.Clear monitoringSafety guaranteed: The Battery Mate LED display indicates whether the power input is active.Robust and durableCompletely corrosion-proof material with aluminium heat sinks, the electronic components are encased in synthetic materials.Fast installationThe composite end plates feature connection lugs and solid bolt connections with nuts and locking rings to ensure easy installation.

€272.78*

While battery isolators are conventional diode splitters, the Battery Mate’s technology is electronic and includes mosfets (transistors). Its componen...

Shipped in 1-3 days

Mastervolt Multipurpose Contact Output

Mastervolt’s potential-free contact can be customised and programmed to give your MasterBus network unprecedented possibilities. Use it, for example, to control a ventilator or operate a generator from a different brand.Mode 1:The Multipurpose Contact Output can be use as CSI (charger status interface) for the ChargeMaster switching when there is an error. Configuration for the CSI can be found in the ChargeMaster's menu under "Configuration/Events". Mode 2: Operation of the Multipurpose Contact Output is only possible with a MasterBus. Information about the MasterBus as well as its event structure can be found under www.mastervolt.com.The following table gives shows the Multipurpose Contact Output's functions: Monitoring Description Factory settings Range State Relay can be switched On (activate) or Stand by Stand by Stand by / Active Override A¨ndern Sie den Status des Relais Stand by Aktiviert / Stand by Configuration Description Factory settings Range Language Set the Multipurpose Contact Output menu language English See specifications Device name Any name you wish with 12 characters max DC Relay 12 characters max 1 sec pulse Option to create a 1 second starting pulse, needed for some generators Off Off, On Min. runtime Option to use a minimum run time Off Off, On Min. runtime Set the minimum run time if selected 15 minutes 15min - 45days Max. runtime Option to use a maximum run time Off Off, On Max. runtime Set the maximum run time if selected 8 hrs 8 hrs-45 tage

€129.90*

Mastervolt’s potential-free contact can be customised and programmed to give your MasterBus network unprecedented possibilities. Use it, for example, ...

Shipped in 1-3 days

Mastervolt BI 1202-S 120A 12V 24V Heavy-Duty battery separator diode for 2 batteries

astervolt’s BI battery isolators are based on conventional diode technology. The diode voltage drop (ca. 0.6 V) can be compensated for by adapting the output voltage of the connected charger or alternator. Mastervolt battery chargers and Alpha Pro MB charge regulators come as standard with automatic voltage drop compensation.Compact and lightweightThe Mastervolt BI battery isolators are compact and fully solid state, preventing wear. The weight varies from 580 to 1300 grams.Robust and durableCompletely corrosion-proof material with aluminium heat sinks. The electronic components are encased in synthetic materials, the BI models have molded diode splitters.Fast installationThe composite end plates feature connection lugs and solid bolt connections with nuts and locking rings to ensure easy installation.

€122.09*

astervolt’s BI battery isolators are based on conventional diode technology. The diode voltage drop (ca. 0.6 V) can be compensated for by adapting the...

Shipped in 1-3 days

Mastervolt BI 1203-S 120A 12V 24V Heavy-Duty battery separator diode for 3 batteries

€177.57*

Mastervolt’s BI battery isolators are based on conventional diode technology. The diode voltage drop (ca. 0.6 V) can be compensated for by adapting th...

Soon available again

Mastervolt AC Power Analyser

The AC Power Analyser is a multi-functional measuring device which can visualise the AC current and AC voltage, frequency, Cos Phi and the power of the system. On top of that it features the ‘inverter control’ and a free programmable ‘potential free contact’. Use it to connect AC power devices such as generators or isolation transformers to the MasterBus network.Delivery scope:77031200 AC Power Analyser6609201050 Current Transformer 100:577040000 Masterbus Terminator77040100 MasterBus cable Cat5E, RJ45 to RJ45 1m

€472.20*

The AC Power Analyser is a multi-functional measuring device which can visualise the AC current and AC voltage, frequency, Cos Phi and the power of th...

Soon available again

Mastervolt 10m Masterbus Cable RJ45 / CAT 5E UTP

As this cable serves as data and power cable for perpherical devices this is the only cable you need for your MasterBus-network. Devices compatible with the MasterBus are equipped with two connectors by default. Other devices need an interface.If the length you need is not available check out the DIY-kit which includes everything necessary to make MasterBus-cables in any length. Details:Connector: RJ45 (both sides)Length: 10mCable type: CAT5E UTPPurpose: data connection and partial power supply of system components compatible with MasterBus Delivery scope:1x Mastervolt 77041000 Masterbus cable 10m

€16.98*

Content: 10 Meter (€1.70* / 1 Meter)

As this cable serves as data and power cable for perpherical devices this is the only cable you need for your MasterBus-network. Devices compatible wi...

Soon available again

Mastervolt MasterBus Inverter Interface

The Mastervolt Masterbus Inverter Interface (MPN 77030700) enables you to integrate a Mass Sine Inverter into your network which then can be controlled via the MasterView-panel or a PC. Information about the Mastervolt MasterBusAll devices compatible with MasterBus are marked with the MasterBus logo. MasterBus is a fully decentralized data network for the communication of Mastervolt system components. As it has proven as a very reliable technology in vehicles, this network grounds on CANBUS-technology.MasterBus carries out the energy management for all connected devices such as inverters, chargers, generators and many more. This allows the communication between your devices, for example starting a generator at low battery charging level. Due to the use of UTP-patch cables MasterBus reduces the complexity of of electrical systems. All components are simply connected serially. That's why every device is equipped with two MasterBus-outputs. If two or more devices are connected via those outputs the form a local data network, the so-called MasterBus.The outcome is a reduction of material costs as there are only few cables as well as less time for installation is needed. For a centralized monitoring of your system Mastervolt offers a wide range of panels that show all important system data at a glance and a push of a button. There are four different panels - from the small 120x65mm LCD-monitor, compatible with Mastervision, to the full-color panel of the MasterView-system.All panels can be used to monitor, control and configure every connected MasterBus-device. New devices can be integrated into your MasterBus network easily. This makes the MasterBus network very flexible - not only today but also in the future. Mastervolt also offers interfaces to integrate non-MasterBus-devices.For direct communication of MasterBus and a device not offered by Mastervolt we recommend the ModBus-interface. Delivery scope77030100 Masterbus Interface77040000 Masterbus Terminator77040600 6m Masterbus data cable Cat5E UTP Patch, RJ45 zu RJ45Interface Connection Cable for 77030700Manual

€164.83*

The Mastervolt Masterbus Inverter Interface (MPN 77030700) enables you to integrate a Mass Sine Inverter into your network which then can be controlle...

Soon available again

VAT-exempt delivery possible*

Mastervolt Mass Sine 24/2500 Sine Wave Inverter 24V 230V 2500W

Mastervolt offers a complete range of inverters from 300 watt to 40 kwatt in AC Master, Mass Sine and Mass Sine Ultra models. The AC Master is ideal for small and medium-sized applications, while Mass Sine and the advanced Mass Sine Ultra inverters are mainly intended for larger systems and for professional purposes. Mastervolt offers inverters for 230V/50Hz as well as 120V/60Hz (American voltage).No humming with HF technologyOur use of high-frequency switch technology means you can say goodbye to humming transformers and hello to efficiency. Mastervolt inverters are also small and lightweight to ensure easy installation.High peak power during start upThe Mastervolt sine wave inverter can provide up to 200 % surge capacity to equipment that requires extra power during start up.Efficient use of batteriesA high efficiency when inverting and an automatic economy mode when there is no consumption gives you longer use of your batteries.Simple and safe to connectThe inverters feature robust connection technology, internal in the larger models and a plug & play socket with cable for the smaller models.MasterBus compatibleEvery Mass Sine inverter can be easily connected to a MasterBus network with only one cable and one connection. You can also choose central, local or remote monitoring, configuration and control of your system.

€2,224.47*

Mastervolt offers a complete range of inverters from 300 watt to 40 kwatt in AC Master, Mass Sine and Mass Sine Ultra models. The AC Master is ideal f...

Soon available again

Mastervolt ChargeMaster 12/50-3 12V 50A - charger for 3 battery banks

€767.91*

Power you can rely on 3-Step+ charging technology for fast and complete charging. Safe and complete charging due to standard safety features...

Soon available again

Mastervolt 25m Masterbus Cable RJ45 / CAT 5E UTP

As this cable serves as data and power cable for perpherical devices this is the only cable you need for your MasterBus-network. Devices compatible with the MasterBus are equipped with two connectors by default. Other devices need an interface.If the length you need is not available check out the DIY-kit which includes everything necessary to make MasterBus-cables in any length. Details:Connector: RJ45 (both sides)Length: 25mCable type: CAT5E UTPPurpose: data connection and partial power supply of system components compatible with MasterBus Delivery scope:1x Mastervolt 77042500 Masterbus cable 25m

€24.53*

Content: 25 Meter (€0.98* / 1 Meter)

As this cable serves as data and power cable for perpherical devices this is the only cable you need for your MasterBus-network. Devices compatible wi...

Soon available again

Mastervolt Mass Sine 12/1200 Sine Wave Inverter 12V 230V 1200W

€1,059.22*

Mastervolt offers a complete range of inverters from 300 watt to 40 kwatt in AC Master, Mass Sine and Mass Sine Ultra models. The AC Master is ideal f...

Soon available again

Mastervolt DC Distribution 500

The Mastervolt DC Distribution 500 is a connection device that allows the save connection of up to 4 different consumers. The internal fuses are surveilled and - their status can be recalled via the MasterBus communication platform. The DC Distribution 500 is the smallest distribution model available. It connects up to four DC devices to the DC groups, such as a battery charger, inverter, alternators and solar panels. With the included plug & play cable it can be easily connected to the MasterBus network. To display the distributor's measurement data as well as its configuration a monitoring device like the Maserview Easy 3.5 Touch is needed. Alternatively the configuration of the Mastershunt can be done even easier via USB interface and the free software MasterAdjust. The MasterView panel gives all fuses logical names to ensure you receive understandable error notifications (for example charger fuse defect). The DC Distribution always comes with four ANL fuses: 80, 80, 125 and 160 A, and a spare fuse of 125 A. Important product features: connection of up to 4 devices to the main-DC-conduction, fusing on the plus-conductor easy installation up to 4 fuses applicable exact warning display for system fuses remote monitoring of fuses supports MasterBus network LEDs display data traffic and alarm status solid fuse casing with DC-connector separation control via optional touch display MasterView Easy 3.5 part of the Mastconnect system (easy plug connection to Mastershunt and Digital DC 10x10A) Event-dependent programmingAn event is a condition under which you want the device to perform another task. If a fuse is tripped maybe a consumer should be shut off. To choose this device a certain signal is needed which communicates that the according fuse tripped. This signal is enabled by this event. The DC Distribution provides 4 parameters which serve as event. These can be ON (operating) or OFF (enabled). Delivery scope1x Mastervolt 77020200 DC Distribution 5001x Mastervolt 77040000 MasterBus Connection Device (Terminator)1x Mastervolt 77040050 0,5m MasterBus Connection Cable2x Mastervolt 77049080 ANL-Fuse 80A2x Mastervolt 77049125 ANL-Fuse 125A1x Mastervolt 77049160 ANL-Fuse 160A1x Manual

€335.22*

The Mastervolt DC Distribution 500 is a connection device that allows the save connection of up to 4 different consumers. The internal fuses are surve...

Soon available again

Mastervolt ChargeMaster 12/10 12V 10A Battery Charger for one Battery Bank

Power you can rely on 3-Step+ charging technology for fast and complete charging. Safe and complete charging due to standard safety features. Memory function prevents overcharging in case of an unstable power supply. Clear control panel. Easy to install. Built-in system functionality (MasterBus) in combination with other Mastervolt products. Always on course with Mastervolt…Mastervolt ensures you an electrical system with no weak links and a dependable and silent power supply. Whether for recreational or professional purposes, with Mastervolt you always have power you can rely on... The power to be independent.ChargeMaster battery chargers Make the most of your batteries with the ChargeMaster, plugging in and charging anywhere in the world. Mastervolt’s ChargeMaster guarantees fast and complete charging of your batteries no matter where you are. The ChargeMaster can charge multiple battery banks simultaneously thanks to its combined functionality. Moreover, all ChargeMasters can be easily connected to a MasterBus network with only one cable and one connection. You also have the option of central, local or remote monitoring, configuration and control of your system. The ChargeMaster is available in various models to guarantee you the ideal battery charger for any situation and demand. Charging your batteries with every voltageThe Mastervolt ChargeMaster supplies a maximum capacity wherever you are via auto-ranging. Auto-ranging ensures perfect fully automatic operation anywhere in the world, regardless of the available mains voltage (90-265 V AC, 50 or 60 Hz). The 3-step+ charging technology guarantees fast and complete charging, while the cos phi 1 regulation gets the most out of limited generator capacity.Sturdy connectionsMetal-on-metal fitting gives a firm connection, and prevents corrosion or overheating of contact surfaces.Charging multiple battery banksThe ChargeMaster series has three equal charge outputs. Those of the smaller ChargeMaster models are pre-installed with two metres of cable for a plug & play solution, while the heavier models have one full output (for example for your service battery) and two outputs of 10 A, ideal for your starter batteries.

€183.36*

Power you can rely on 3-Step+ charging technology for fast and complete charging. Safe and complete charging due to standard safety features...

Soon available again

Topseller

VAT-exempt delivery possible*

Top seller

1.5m 6mm² MC4 Connection Cable Plug/Socket Extension

1.5m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The equipped MC4-connectors are as well German originals made by MultiContact. The final assembly of these cables takes place in our manufactory in Lower Bavaria. This connection cable is fabricated with professional tools to ensure an extremely high tensile strength which resists even hardest conditions and constant environmental influences. Application: ideal for flexible connections of solar modules on different roof sides or module rows for parallel connection of solar modules Advantages: Plug and Play - unpack and install - you do not need any professional tools irradiated solar cable (only two producers worldwide provide this technology) planning certainty thanks to a long manufacturer's warranty of 10 years available in different lengths and colors and therefore suitable for nearly every task Technical data: cable type: Lapp Ölflex XLR-R 6mm² TÜV- and UL-certified max. voltage: 1000V length: 1.5m equipped with 1x MC4 male + 1x MC4 female

€10.23*

Content: 1.5 Meter (€6.82* / 1 Meter)

1.5m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The...

Shipped in 1-3 days

VAT-exempt delivery possible*

Top seller

More versions available

10m connection cable micro changeover switch with Betterie bc01 socket to earthed socket (plug angled)

The 10m Plug & Play Micro Inverter connection cable from Offgridtec (mpn 8-01-013602) connects your micro inverter (e.g.Envertech) with a standard grounded socket (Schuko). The cable is equipped with the Betteri bc01 socket part on the inverter side and an angled Schuko plug type f on the socket side. This cable is used for the connection between the micro inverter and your house power supply. special features of the P&P inverter connection cable Immediately ready for use since delivered as Plug & Play version technical features of the 5m Microinverter connection cable Offgridtec-Part number: 8-01-013602 Cable length: 10m Usage; Connection of compatible micro inverters to the house power grid via feed-in socket Cable type: heavy rubber cable H07RN-f 3x2,5 from Lapp-Kabel Connector on socket side: Schuko plug type-f angled Connector on inverter side: Betteri bc01 socket compatible micro inverters EVT Inverter Series from Envertech evt300s / evt560s / EVT1200S TSUN tsol M350/M800 Bosswerk mi300 / MI600 Hoymiles mi-300 / MI-600 a.o. (e.g. Huayu) Scope of delivery: 1x Offgridtec 8-01-013602 10m plug & play connection micro inverter to power outlet

Variants from €44.90*

€54.90*

Content: 10 Meter (€5.49* / 1 Meter)

The 10m Plug & Play Micro Inverter connection cable from Offgridtec (mpn 8-01-013602) connects your micro inverter (e.g.Envertech) with a standard...

Shipped in 1-3 days

VAT-exempt delivery possible*

Top seller

1m 6mm² MC4 Connection Cable Plug/Socket Extension

1m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp the leading cable producer in Germany.The equipped MC4-connectors are as well German originals made by MultiContact. The final assembly of these cables takes place in our manufactory in Lower Bavaria. This connection cable is fabricated with professional tools to ensure an extremely high tensile strength which resists even hardest conditions and constant environmental influences. Application: ideal for flexible connections of solar modules on different roof sides or module rows for parallel connection of solar modules Advantages: Plug and Play - unpack and install - you do not need any professional tools irradiated solar cable (only two producers worldwide provide this technology) planning certainty thanks to a long manufacturer's warranty of 10 years available in different lengths and colors and therefore suitable for nearly every task Technical data: cable type: Lapp Ölflex XLR-R 6mm² TÜV- and UL-certified max. voltage: 1000V length: 1m equipped with 1x MC4 male + 1x MC4 female

€9.27*

1m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp the leading cable producer in Germany.The eq...

Soon available again

Top seller

2,5mm² standard flat fuse holder incl. cable

This fuse holder is fully insulated, the housing is made of rubber, or fully potted. The fuse is additionally protected from corrosion by the cover. The holder is suitable for trucks, cars and much more. You can protect electronic components quickly and easily against overvoltages. You can find suitable flat fuses in our assortment.suitable for truck, car and 12v / 24v solar systems.Technical details:Rated current: max. 20ALxWxH 40x17x45mmTotal length: 25cmsplash water protected by rubber capHousing and cover made of solid rubberfor standard atc / car fusesCable cross section: approx. 2,5mm²/AWG14non-slip surface, therefore easy to open even when wetScope of delivery:1 holder without fuse

€1.79*

Content: 0.25 Meter (€7.16* / 1 Meter)

This fuse holder is fully insulated, the housing is made of rubber, or fully potted. The fuse is additionally protected from corrosion by the cover. T...

Shipped in 1-3 days

VAT-exempt delivery possible*

Top seller

2m 6mm² MC4 Connection Cable Plug/Socket Extension

2m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The equipped MC4-connectors are as well German originals made by MultiContact. The final assembly of these cables takes place in our manufactory in Lower Bavaria. This connection cable is fabricated with professional tools to ensure an extremely high tensile strength which resists even hardest conditions and constant environmental influences. Application: ideal for flexible connections of solar modules on different roof sides or module rows for parallel connection of solar modules Advantages: Plug and Play - unpack and install - you do not need any professional tools irradiated solar cable (only two producers worldwide provide this technology) planning certainty thanks to a long manufacturer's warranty of 10 years available in different lengths and colors and therefore suitable for nearly every task Technical data: cable type: Lapp Ölflex XLR-R 6mm² TÜV- and UL-certified max. voltage: 1000V length: 2m equipped with 1x MC4 male + 1x MC4 female

€11.19*

Content: 2 Meter (€5.60* / 1 Meter)

2m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The e...

Shipped in 1-3 days

VAT-exempt delivery possible*

Top seller

2m Solar Profile Rail 4x4cm aluminium - sold by the meter

For a quick and easy installation of solar modules. These rails can be used for all common module types for flat roofs, pitch roofs or field systems. Length: 1mMaterial: aluminiumUpper mounting channel: solar sliding block M8 Slot 8Lower mounting channel: hex bolt / t-head bolt (DIN 933 M10)Dimensions: 4x4cm These profiles are compatible with all installation equipment we offer. As they are used for substructures these profile might have some slight scratches on the surface. Note:Because of delivery costs these rails are normally delivered with a max. length of 2m. If a longer rail is needed (max. 6.1m) please contact us. Alternatively it is possible to connect several profile rails with rail connectors until the needed length is reached. These connectors are alsoavailable in our shop.

€14.90*

For a quick and easy installation of solar modules. These rails can be used for all common module types for flat roofs, pitch roofs or field systems. ...

Shipped in 1-3 days

VAT-exempt delivery possible*

Top seller

2m Solar Profile Rail 4x4cm aluminium (upside sliding block)

Profile rails for quick and easy mounting of solar modules. Suitable for all common module types on flat and pitched roofs as well as for ground-mounted systems.PropertiesLength per article: 1.5 mMaterial: aluminumMounting channel top: solar slot stone m8 slot 8Mounting channel bottom: hexagon screw din 933 M10Dimensions: 40 x 40 mmOur offered solar profiles are compatible with our offered solar fasteners.These profiles are intended for a substructure and may therefore have scratches on the surface.Notice: By means of the rail connectors available from us, several solar profiles can be connected together to achieve the desired length.Scope of delivery:1x 1.5m solar profile rail

€24.90*

Content: 1.25 Meter (€19.92* / 1 Meter)

Profile rails for quick and easy mounting of solar modules. Suitable for all common module types on flat and pitched roofs as well as for ground-mount...

Shipped in 2-5 days

VAT-exempt delivery possible*

Top seller

2m Solar Profile Rail 4x4cm aluminium (upside sliding block)

Profile rails for quick and easy mounting of solar modules. Suitable for all common module types on flat and pitched roofs as well as for ground-mounted systems.PropertiesLength per article: 1.5 mMaterial: aluminumMounting channel top: solar slot stone m8 slot 8Mounting channel bottom: hexagon screw din 933 M10Dimensions 40 x 40 mmOur offered solar profiles are compatible with our offered solar fasteners.These profiles are intended for a substructure and may therefore have scratches on the surface.Notice: By means of the rail connectors available from us, several solar profiles can be connected together to achieve the desired length.Scope of delivery:1x 1.5m solar profile rail

€29.90*

Content: 1.5 Meter (€19.93* / 1 Meter)

Profile rails for quick and easy mounting of solar modules. Suitable for all common module types on flat and pitched roofs as well as for ground-mount...

Shipped in 2-5 days

Top seller

2x Battery Pole Adaptors with external thread M8

Battery pole adaptor (+ and -) with external thread for batteries with M8 internal thread Suitable for Westech Gel batteries 100Ah and 200Ah as well as for batteries with M8 internal thread if you prefer to use a roundpole instead of a M8 bolt. Pole adaptor set with various connection possibilities for batteris with internal thread to normal pole. Perfect for caravan and boat owners, yacht sportsman, DIY people and solar systems Product features: - M8 external thread - universal use - for + and - - for 6 and 12V batteries - very robust through high-quality production - very good conductivity - Material: Copper with silver alloy

€4.88*

Battery pole adaptor (+ and -) with external thread for batteries with M8 internal thread Suitable for Westech Gel batteries 100Ah and 200Ah as well a...

Shipped in 1-3 days

VAT-exempt delivery possible*

Top seller

35mm End Clamp for Solar Modules

With 4 end clamps modules can be mounted on profile rails. Features: material: aluminuium opening for M8 screws frame height of 35mm dimensions: 70 x 30 x 39mm

€1.27*

With 4 end clamps modules can be mounted on profile rails. Features: material: aluminuium opening for M8 screws frame height of 35mm dimensions...

Shipped in 1-3 days

Mastervolt

Mastervolt products are widely used in demanding markets such as marine, automotive, offshore, off-grid solar and infrastructure. If you want to learn more about Mastervolt's products, explore our offers at Offgridtec!

What sets Mastervolt apart

Mastervolt makes people independent in their electricity needs, wherever they are. Expertise in power management, power monitoring, power conversion and power storage creates added value for customers.

Another special feature of Mastervolt: Masterbus. Thanks to the high-speed CANbus technology and the uniform communication protocol, you can easily and quickly connect several components here without having to worry about complex cabling.

Mastervolt products at a glance

At Offgridtec you have a large selection of Mastervolt products. For example, you will find inverters, DC distributors, battery monitoring indicators and other battery accessories in top quality and at the best prices.

Mastervolt inverter

Mastervolt inverters provide reliable power supply around the clock, even under extreme conditions. The high efficiency as well as the automatic economy mode serve to keep digital clocks working properly and guarantee you many additional operating hours of your batteries. High frequency technology ensures superior performance without annoying hum. Due to robust and professional connections, the Mastervolt inverters also enable a quick and safe installation.

Mastervolt CombiMaster

The Mastervolt CombiMaster stands for special user-friendliness and reliability. During its development, the focus was primarily on customer needs, which were implemented with state-of-the-art technology. With the CombiMaster, voltage drops are a thing of the past. The automatic AC switching system switches back and forth between generator and mains voltage, thus ensuring an uninterrupted power supply. In addition, the power-assist function prevents the main fuse from blowing when connected to weak mains or small generators.

Mastervolt Easyview 5

The EasyView 5 from Mastervolt is a waterproof system monitor with a daylight readable display and an intuitive touch screen. Its ease of use and size make it ideal for yachts, motor vehicles and stationary systems in various industries such as:

the marine industry
the automotive industry (leisure and commercial)
in the offshore sector or
for off-grid and industrial applications

Important: The EasyView 5 is only a display device, not a measuring device. The measurement data is first obtained by configuring the DC Distribution and can only then be illustrated via a display.

Buy Mastervolt products online

Discover the world of Mastervolt products in the Offgridtec online shop. Whether you are looking for a reliable inverter, battery charger or battery monitor, you will find it here. Enjoy peace of mind knowing that you have the best energy solutions within reach.

Do you have any questions? Then please feel free to contact us. You can reach us by phone on +49 8721 91994-00. You are also welcome to send us an email at [email protected] We will be happy to advise you personally!

FAQ

What makes Mastervolt stand out? Mastervolt excels in providing reliable electricity solutions and making people independent in their electricity needs.
What does an inverter do? An inverter is an important technical device that converts the direct current from a PV system into alternating current. It also ensures that the photovoltaic system always runs at optimal efficiency.
What are the special features of the Mastervolt CombiMaster? The Mastervolt CombiMaster stands for special user-friendliness and reliability. Customer needs were taken into account in its development and only the most modern technology was installed.
What is the Mastervolt Easyview 5? The Mastervolt EasyView 5 is a waterproof system monitor. Its ease of use and size make it ideal for yachts, motor vehicles and stationary systems.

Mastervolt

What sets Mastervolt apart

Mastervolt products at a glance

Mastervolt inverter

Mastervolt CombiMaster

Mastervolt Easyview 5

Buy Mastervolt products online

FAQ

Subscribe to the newsletter