Growatt ARK XH 5.12kWh high-voltage storage system with base for MIN and MOD XH inverters
Shipped in 3-6 Werktage
€1,615.43*
€1,357.50**
Similar Products
Shipped in 4-8 Werktage
Shipped in 4-8 Werktage
Matching Products
Shipped in 1-3 days
Shipped in 1-3 days
Shipped in 1-3 days
Shipped in 1-3 days
Shipped in 2-5 days
Shipped in 2-5 days
Shipped in 2-5 days
Shipped in 2-5 days
Shipped in 2-5 days
Shipped in 2-5 days
The ARK high-voltage storage system from Growatt is flexible in use thanks to its modular design and can be expanded as required. A battery tower can be constructed with a minimum of 2 and a maximum of 10 ARK high-voltage batteries. A BMS control unit and a connection cable set are included for commissioning with a compatible inverter. The battery base is available for floor installation. The A2 version is the successor to the previous ARK 2.5H-A1 and can also be easily combined with it.
The Growatt high-voltage battery system includes:
- ARK 2.5H-A2 high-voltage battery LiFePO4 2.56kWh (2-10x depending on selection)
- BDC 95045-A1 BMS control unit
- Connection cable set ARK battery to inverter
- Battery base floor installation
Matching SmartMeter:
Compatible inverters
Please note that at least three ARK high-voltage batteries are required to connect the Growatt MOD-XH inverter.
ARK 2.5H-A2 high-voltage battery
The Growatt ARK 2.5H-A2 high-voltage battery (MPN ARK-2.5H-A2) is a LiFePO4 storage device with high cycle stability and a long service life. The modular, stackable design allows for flexible application in various scenarios and is easy to install. The battery offers excellent performance under high loads and, with its IP65 protection, is also suitable for outdoor installation. Soft start is used to prevent overvoltage in the system. The A2 version is the successor to the previous ARK 2.5H-A1 and can also be easily combined with it.
about the ARK 2.5H-A2 battery:
- Modular, stackable battery concept
- Cobalt-free lithium iron phosphate (LFP)
- High cycle stability and long service life
- Wall or floor installation possible
- Soft start to protect the system from overvoltage
- Automatic wake-up in case of undervoltage
- IP65 protection rating for outdoor installation
- Remote diagnosis and firmware update
Areas of application
- For grid-connected and stand-alone photovoltaic systems
- Emergency power supply
- Uninterruptible power supplies (UPS)
Soft start to protect the system
The soft start mechanism is a protective function used in Growatt batteries to protect the system from power surges. When starting or switching on the battery, the power supply is gradually increased to protect the system from damage that could be caused by a sudden voltage spike. This ensures smooth and safe operation of the battery system.
High cycle life
Growatt ARK battery modules are an ideal storage solution for photovoltaic systems due to their extremely high cycle life and the use of LiFePo4 cells. Regardless of whether it is a grid-connected or stand-alone system, Growatt storage offers numerous advantages over conventional lead-acid batteries and other lithium technologies.
Technical data:
- Battery type: Cobalt-free lithium iron phosphate (LiFePo4)
- Energy capacity: 2.56 kWh
- Usable capacity: 2.3 kWh
- Nominal voltage: 51.2 V
- Operating voltage range: 47.2-56.8 V
- Charging/discharging current: 25 A/0.5 C
- Protection class: IP65
- Temperature range: -10 to 50°C
- Dimensions: 650 x 260 x 180 mm
- Weight: approx. 28 kg
- Certificates: IEC62619, CE, CEC, RCM, UN38.3
BMS control unit
The Growatt BDC 95045-A1 BMS acts as the central monitoring and control unit within the ARK high-voltage battery system and supports communication with the Growatt MIN and MOD-XH inverters. It allows the connection of up to 10 battery modules with an individual capacity of 2.56 kWh. These modules can be connected in series to form a battery tower with a total capacity of up to 25.64 kWh. Storage towers can also be connected to each other, with one BMS required per tower.
about the BDC 95045-A1 BMS
- Compatible with Growatt MIN-XH and MOD-XH inverters
- Modular, stackable battery concept
- monitoring and control
BMS control parameters
Control parameters include state of charge (SOC), grid voltage, current, cell voltage, cell temperature, and PCBA temperature measurement. By precisely monitoring these parameters, the BMS ensures optimal battery performance and longevity.
Flexible expansion
The ARK battery system from Growatt offers a high degree of flexibility thanks to its expandable configuration options, which range from 2.56 kWh to 25.6 kWh. The modular design and use of cables make installation and expansion of the system simple and straightforward. Another innovation of the ARK system is that, unlike other battery systems, it does not require a battery cabinet. Only a battery base is needed to ensure stability.
Technical data:
- Protection class: IP65
- Temperature range: -10~50°C
- Dimensions: 650 x 260 x 185 mm
- Communication: CAN
- Weight: 8 kg
Connection cable set for inverter
The Growatt battery cable set is required to connect Growatt ARK2.5H-A1 batteries to MIN or MOD-XH series inverters.
- 2x 2m power cables (positive/negative)
- 2 m communication cable
- 2 m grounding cable
ARK battery base
The Growatt ARK battery base is suitable for ground installation of Growatt ARK battery modules and ensures that the battery tower is stable. The Growatt ARK system has a modular design, which means that several batteries can be combined, with the Growatt base serving as the foundation. Up to 10 storage modules and the associated BMS can be stacked on one base.
- for floor mounting of Growatt ARK HV and XH batteries
- one base per battery tower
- Weight: 3 kg
Manufactuerer Information
Growatt
Growatt New Energy B. V.
Klaverbaan 3
2908 KD Capelle aan den Ijssel
Netherlands
Mail: info@ginverter.com
Tel.: +31 850409967