Lapp ÖLFLEX CLASSIC 110 7G1.5 1119307 Control cable sold by the meter
The VDE-registered ÖLFLEX® Classic 110 PVC control cable from LAPP is suitable for numerous applications, such as wind energy or heating and air conditioning technology. The control cable is suitable for both permanent installations and occasional flexible use without tensile stress in free, non-continuous movementit can be used universally for wiring machine-internal and cross-system control circuits in dry and damp rooms. The 4 kV test voltage ensures a high level of insulation safety.
This item is sold by the meter. Each item corresponds to one meter. For example, if you purchase 10x this item, you will receive one continuous piece with a length of 10m.
about the PVC control cable
- Gray PVC sheath
- Flame resistant
- oil resistant
- Torsion-resistant
- Classified fire behavior
- VDE-tested quality
- Type: ÖLFLEX® CLASSIC 110
- Conductor material: bare copper
- Chemically resistant
Technical data
- Test voltage: 4000V
- Nominal voltage:U0/U: 300/500V AC
- Conductor dimensions: 7G1.5
- Number of cores: 7 G (with protective conductor)
- Nominal conductor cross-section: 1.5mm²
- Temperature, fixed installation: -40°C to +80°C
- Temperature, occasionally moved: -15°C to +70°C
- Temperature, continuously dynamic movement: -5°C to +70°C
- Minimum bending radius, fixed installation: 35.6 mm
- Minimum bending radius, occasionally moved: 89 mm
- Minimum bending radius, dynamically continuously moved: 133.5 mm
- Torsion: At +/- 150°/m and min. 5°C up to 5000 torsion cycles
- Torsion: At +/- 150°/m and min. -20°C up to 2000 torsion cycles
Scope of delivery
1x Lapp ÖLFLEX CLASSIC 110 control cable 7G1.5 1119307
Manufactuerer Information
Lapp
U.I. Lapp GmbH
Schulze-Delitzsch-Straße 25
70565 Stuttgart
Germany
Mail: info.de.uil@lapp.com
Tel.: +49 711 783801
