Lapp solar cable XLS-R T 2X6 BK/RD

XLS-R T solar cables are halogen-free, double-insulated, and cross-linked twin cables for permanent outdoor use. These cables are used in photovoltaic system construction both for wiring the individual solar modules to each other and for wiring to the inverter

1. Construction data --- Conductor: Fine-stranded stranded wire made of tinned copper wires, in accordance with IEC 60228, class 5 --- Conductor insulation: Temperature-resistant and halogen-free co-polyolefin, radiation-crosslinked Pair colors: black/red --- Outer sheath: Flame-retardant and halogen-free co-polymer, radiation-crosslinked Outer sheath color: black

2. In addition to the extended temperature range, the cross-linked compound offers excellent UV, ozone, and weather resistance as well as abrasion resistance. It is used both for cabling solar modules to each other and for connecting the individual module rows and the inverter.

This item is sold by the meter. Each item corresponds to one meter. For example, if you purchase 10x this item, you will receive one continuous piece with a length of 10m.

Electrical properties

Nominal voltage U0/U according to VDE: AC 600/1000 V / DC 900/1500 V
Maximum permissible DC voltage: 1.8 kV DC (conductor/conductor, ungrounded system)
Test voltage AC 6.5 kV Dielectric strength tests according to EN 50395

Thermal properties

Temperature range for fixed installation: -40°C to +100°C Max. conductor temperature
Short-circuit temperature +200°C
Installation temperature, flexible: max. -25°C
Thermal life according to EN 60216-2
Heat pressure resistance according to EN 60811-3-1
Moisture and heat test according to EN 60068-2-78 at 85% humidity

Mechanical properties

Minimum bending radius occasionally moved: 15 x cable diameter
Fixed installation: 5 x cable diameter
Dynamic penetration: according to requirement profile AK 411.2.3 Appendix F
Tear resistance: according to requirement profile AK 411.2.3 Appendix G
Testing of insulation and sheath tear resistance and elongation: in accordance with EN 60811
Chemical properties

Ozone resistance: in accordance with EN 50396 Part 8.1.3 Method B
Weathering/UV resistance in accordance with HD 605/A1
Fire behavior flame retardant according to IEC 60332-1-2
Halogen-free according to IEC 60754-1
Acid and alkali resistance according to EN 60811-2-1 (oxalic acid and caustic soda)
EC directives

The cables comply with EC directives 2006/95/EC (Low Voltage Directive) and 2002/95/EC and 2011/65/EC (RoHS, Restriction of the use of certain hazardous substances).

Laying in the ground

Solar cables can generally be laid in the ground in protective conduits suitable for underground installation, provided that there is no permanent contact with water and that any accumulated water is safely drained away. The installation of the cables and the correct execution of the cable trench must comply with VDE 0100 Part 520 or comparable standards.