Offgridtec® Autark M-Master 200W solar system - 1000W AC power 122Ah AGM battery

The Autark M-Master is the medium-sized complete system in the Autark family and, thanks to its MONO 100W V2 23V solar module, is suitable for a wide range of applications. The electricity generated is stored in the cycle-resistant 122Ah AGM battery – the high-quality charge controller with integrated display provides information about the battery's state of charge while your 230V consumers can be operated on the sine wave inverter. The whole system is delivered with a professional connection cable kit – just plug it in and get started. The system is suitable for a wide range of applications – from 12V lighting, to charging laptop, cell phone, and camera batteries and other small consumers, to 230V household appliances with a maximum continuous power of 1000W (15min)

Features of the Autark M-Master

• Can be expanded by 2 x 100W on the module side if required, with minimal installation effort
• Average daily yield between March and October: approx. 800Wh (approx. 66Ah)
• Plug & Play Ready-to-connect system – just plug it in and get started
• Enables the operation of 12V and 230V consumers, as well as 5V USB consumers
• USB charging option directly on the charge controller (max. 2.4A)
• Easy-to-read LCD display provides information on all operating parameters
• Flexible installation options thanks to 8 m connection cable from module to controller
• Extensive electronic protection functions, such as overload protection, overtemperature protection, undervoltage shutdown, short-circuit protection, reverse polarity protection, etc.
• RS485 communication port on the voltage converter offers extensive configuration options via PC (RS485 to USB interface cable included)
• Charge controller enables temperature-compensated charging – temperature sensor included in delivery
• Configurable 12V load output on the charge controller for consumers up to max. 30A – suitable for lighting control, for example

Areas of application

This complete system can be used in a variety of ways. Whether as a stationary system in a mountain hut or in an allotment garden, this system makes it easy to operate small coolers and refrigerators on a permanent basis and to charge cell phones and laptops. Installation in a motorhome is also possible – we also stock the appropriate brackets and adhesive kits for mounting.

Extensive connection options

• 220/230V AC 50/60HZ 1500W (15min – 1000W / continuous – 800W / peak power – 1600W) Schuko socket on the sine wave voltage converter
• 12V consumer output with 30A power directly on the charge controller
• 2 x USB charging ports on the charge controller with max. 2.4A (total)
• 1 x USB charging port on the voltage converter with max. 1A output

Parts list – what's included

• 2 x Offgridtec MONO 100W V2 solar panel 23V black frame
• 1 x pair of solar connectors compatible branch sockets for connecting the two solar modules in parallel
• 1 x 30A PWM charge controller with clear LCD display and USB charging option – the device also has a 30A load output and is easy to operate – all important parameters can be read on the display
• 1 x 122Ah AGM battery with M8 screw terminal Dimensions: 406 x 174 x 233 mm (+5mm terminal) – the battery is completely maintenance-free and leak-proof and lasts up to 10 years, depending on use
• 1x 1000W 12V to 230V sine wave converter with a Schuko socket incl. connection cable – the nominal power of 1000W can be output by the device for1 x 8m 6mm² professional connection cable from solar module to charge controller with original Stäubli solar connectors and high-quality Lapp Ölflex
• 1 x 8m 6mm² professional connection cable from solar module to charge controller with original Stäubli solar connectors and high-quality Lapp Ölflex 2x6mm² solar cable
• 1 x 1.5 m 10 mm² professional battery connection cable with MIDI fuse holder, 40 A MIDI fuse, and M8 ring cable lugs for connecting the charge controller to the battery
• 1 x temperature sensor with 3m length for connecting the controller to the battery
• 1 x battery connection cable 25mm² 40cm Ozone, UV, and temperature resistant
• 1 x fuse holder
• 5 x 150A MEGA fuse for installation between the voltage converter and the positive battery terminal to protect against short circuits
• 1 x 40A midi fuse

Roof mount for the solar module

Since there are different requirements for the bracket for a module and these vary greatly depending on the type of roof, the systems in the Autark series are not equipped with a roof bracket as standard. This can of course be purchased separately – you can find suitable suggestions here:

• Solar module mount for flat roof or wall mounting
• Mounting kit for pitched roof installation on roof tiles (Frankfurt pan tiles, etc.)
• Mounting kit for pitched roof installation on roofing felt, corrugated asbestos cement, and sheet metal roofs with wooden substructure
• Mounting kit for pitched roof installation on plain tiles

Scope of delivery:

1x Autark M-Master solar system with 2x100W solar modules, 30A PWM charge controller with LCD display and USB ports, 1000W sine wave inverter, AGM battery, 122Ah, operating instructions.