Mega fuse 100a / 70v

A middle clamp is needed when more than one module is installed on a profile rail. Features: material: aluminium opening for M8 screws space between modules: 2cm dimensions: 70 x 35 x 15cm

M10 hex screw fitting for various applications and systems in the field of module mounting, for example profile rails. Material: VA stainless steelType: M10Length: 30mm

3m 6mm² MC4 connection cable (equipped with MC4 plug and socket) with irradiated solar cable made by Lapp, the leading cable producer in Germany.The equipped MC4-connectors are as well German originals made by MultiContact. The final assembly of these cables takes place in our manufactory in Lower Bavaria. This connection cable is fabricated with professional tools to ensure an extremely high tensile strength which resists even hardest conditions and constant environmental influences. Application: ideal for flexible connections of solar modules on different roof sides or module rows for parallel connection of solar modules Advantages: Plug and Play - unpack and install - you do not need any professional tools irradiated solar cable (only two producers worldwide provide this technology) planning certainty thanks to a long manufacturer's warranty of 10 years available in different lengths and colors and therefore suitable for nearly every task Technical data: cable type: Lapp Ölflex XLR-R 6mm² TÜV- and UL-certified max. voltage: 1000V length: 3m equipped with 1x MC4 male + 1x MC4 female

Irradiated 5m 6mm² MC4 connection cable (equipped with MC4 plug and socket) from Lapp, one of the leading cable manufacturers in Germany.Also the MC4-plugs are MultiContact-originals. These components are assembled in our manufactory in Lower Bavaria. To produce a high quality cable we use special tools to ensure an extremely high tensile strength which can stand also tough circumstances.Even weather influences won't harm this cable for a very long time. Application: ideal for flexible connections of solar modules on different roof sides or module rows for the parallel installation of solar modules Advantages: plug & play: You don't need any tools - simply unpack and install irradiated solar conductor available in different lengths and colors and therefore suitable for various applications Technical data:Cable type: Lapp Ölflex XLR-R 6mm² - TÜV + UL testedMax. voltage: 1000VLength: 5mEquipped with: 1 x MC4 male + 1 x MC4 female

This 3m Victron VE.Direct Cable (ASS030530230) is used to connect devices for communication via the VE.Direct-port, for example BlueSolar charge controllers and MPPT Control remote panel. Possible connections:Victron BlueSolar MPPT charge controller to Color Control GX PanelVictron BlueSolar MPPT charge controller to MPPT Control remote unit BMV70xxx-series to Color Control GX PanelBMV60xxx to Color Control GX Panel VE.Direct cables are not included in these device's delivery scopes and available in lengths of 0.3 to 10m. Delivery scope:1x Victron ASS030530230 3m VE.Direct Cable

The Victron rj45 utp is usable with the Victron communication ports VE.Bus, ve.can, VE.Net and VE9bitRS485 and is used for networking Victron products with corresponding capabilities. It is available in various lengths from 0.3m to 30m. Below you can see a listing of all available lengths 0,3m Victron mpn ASS0300649000,9m Victron mpn ASS0300649201.8m Victron mpn ASS0300649503m Victron mpn ASS0300649805m Victron mpn ASS03006500010m Victron mpn ASS03006501015m Victron mpn ASS03006502020m Victron mpn ASS03006503025m Victron mpn ASS03006504030m Victron mpn ASS030065050

The Smartsolar mppt 250/60-tr from victron Energy (mpn scc125060210), is part of the latest generation of smart solar controllers from the premium Dutch manufacturer. The controller handles a whopping 60a of solar power and can flexibly work with 12/24/36/48v batteries, with a maximum Pv input voltage of 250v dc. Ultra fast power tracking and automatic power point detection in case of partial shading are only 2 of the many highlights of this new class of devices. In addition, this model is capable of parallel operation with other controllers of the same type. Compared to the Smartsolar 150/..... Series, the 250/.... Series can handle a maximum Pv input voltage of 250v. This is also one of the reasons why the 250 solar controller family has been able to increase the efficiency by another 1 percent to a total of 99%, defining new standards in the industry. Among all solar charge controllers we know, this value is currently the best. In comparison to the BlueSolar family, the Bluetooth module is already integrated in the controller of the 250 Smartsolar series, which makes the smart dongle superfluous for this device, if you want to analyze and configure the controller via smartphone or tablet. Also new is the optionally available lcd display, which can simply be plugged onto the SmartSolar 250/60-tr as required. The display then provides all the important information about the controller smart configuration and analysis via victron Connect App Modern Apple and Android smartphones, tablets, Macbooks and other devices can be connected thanks to the permanently integrated Bluetooth module and the free victron Connect app. The app can then be used to configure many important functions of the SmartSolar controller. Of course, it also provides all important parameters such as the current solar yield in real time automatic detection of the maximum power point in case of partial shading In case of partial shading, there may be two or more maximum power points (mppts) on the current-voltage curve. Conventional mppts tend to settle on a local mpp. However, this may not be the optimal mpp. The SmartSolar controller's innovative algorithm will always maximize energy output by adjusting to the optimal mpp key product features of the SmartSolar 250/60-tr 60a 12v 24v 48v mppt victron Energy part number: scc125060210 max pv power: 12 v 860 w / 24 v 1720 w / 48 v 3440 w max rated charge current 60a, 250v max pv open circuit voltage latest generation ultra-fast mpp tracker ensures best possible yield even in overcast conditions automatic detection of mpp voltage in case of partial shading provides further yield improvement compared to "simple" mppt charge controller with optional lcd display permanently integrated Bluetooth module for app-supported analysis and configuration of the controller (via free victron app on compatible devices) optional lcd display available integrated vE.Direct data communication port to connect for communication with additional devices the gx Color Control Panel or a Smart BMv battery monitor groundbreaking 99% efficiency Parallel operation with other 250/85 controllers possible adjustable constant charging voltage adjustable float charge voltage suitable for all agm, gel, lead-acid calcium-calcium and lithium batteries fully programmable charging algorithms which are later activated and switched manually via a switch on the case integrated protection against battery polarity reversal multi-stage and adaptive charging algorithm remote switching on and off possible via 2-pin plug Protection class ip 43 for the electronic components and protection class ip 22 for the connection area of the controller integrated temperature sensor balances maintenance and constant charging voltage according to temperature Day/night time control and light dimming options Latest generation high-speed mpp tracker Especially in overcast conditions, when light intensity is constantly changing, an extremely fast mppt controller improves energy yield by up to 30% compared to PwM charge controllers and by up to 10% compared to slower mppt controllers optional lcd display available for retrofitting for those who prefer to operate and configure the Smartsolar mppt 250/60-tr directly, the Smartsolar Control scc900600010 display is available for retrofitting. The display allows easy configuration of the controller via key input, and also provides all important performance data at a glance extensive electronic protection Protection against reverse battery connection Pv reverse current lock Protection against overheating of the device Protection against short circuits Protection against reverse polarity Pv connection the vE.Direct data communication port vE.Direct in text- mode transmits all important parameters to other devices coupled to the charge controller every second, offering the possibility of communication with additional devices such as the gx Color Control system panel. The vE.Direct connection is intended for products where full Canbus integration (vE-Direct) would be too costly. More information about vE.Direct can be found in our victron Energy brand store optionally also available as version with MC4 connectors The 250/60-tr is also available as a version with MC4 connectors on the solar side of the charge controller instead of screw terminals Scope of delivery 1x victron scc125060210 SmartSolar mppt 250/60-tr 12v 24v 48v 60a charge controller 1x instruction manual

Victron dc fuses Mega fuses for operating voltages up to a maximum of 32v. Ideal for use as a fuse on the battery cable of voltage converters and inverters or even charge controllers with high charging currents different mega fuse holders (also modular) available Suitable for the mega fuses listed above, the following Victron fuse holders can be used: standard mega fuse holder modular mega fuse holder with coverFor the modular fuse holder, 2 busbars are also available for expansion, with the help of which you can individually fuse up to 6 high-current circuits: Victron Busbar 5 cip100200100 - for max 500a and 5 modular fuse holders Victron Busbar 6 cip100200100 - for max 1500a and 6 modular fuse holders Scope of delivery:1x Victron dc mega fuse of your choice

The Pylontech battery connection cable set (mpn bw0us3000bal0002) includes 2 x 2 meter cables (plus/minus) with a cross section of 25mm² each and a CAN data cable with rj45 connectors on both sides.The set is needed to connect the batteries of Pylontech with an inverter. Content 2m cable plus with m8 ring cable lug and amphenol connector (Pylontech) 2m cable minus with m8 ring cable lug and Amphenol connector (Pylontech) CAN data cable with rj45 connectors on both ends Scope of delivery: 1x 2m cable set (plus/minus) each with m8 ring cable lug and amphenol connector 1x data cable with rj45 connectors on both sides

This VE.Can to CaN bus bms cable from Victron (mpn ass030710018) is needed to connect a CaN bus capable battery, which is not from Victron, to a Victron GX device. The cable, with a length of 1.8m, corresponds to type a, which can be used for the following batteries: BYD B-Box Pylontech us2000c / us3000c / Force-L Installation The side labeled "CaN-Bus bms" is plugged into the battery. The other side labeled "VE.Can" must be connected to either the VE.Can port of the GX device or the bms can port. Both port types of a GX device can be configured for use with a third-party CaN bus battery connected to a bms. For configuration information, refer to the manual for the battery you are using. Scope of delivery: 1x Victron VE.Can to CaN bus bms type a cable 1.8m (ass030710018)