Offgridtec© 12V Autarkic XL-Master 300W Solar System - 1500W AC Output 12V 230V

Powerful All-in-One Complete Solar System

The Autark XL-Master is one of the larger complete systems in the Autark family and delivers an average daily yield of 1200 watt hours between March and October. The generated power is stored in the cycle resistant 154Ah agm battery - the high quality charge controller with integrated display gives you information about the state of charge of the battery while your 230v consumers can be operated at the sine wave voltage converter. Of course, the whole thing is delivered including a professional connection cable kit - plug it together and get started. The system is suitable for a wide range of applications - from 12v lighting, charging laptop, cell phone and camera batteries and other small consumers, to 230v household appliances with a maximum continuous power of 1500w (15min)

Features of the Autark XL-Master

• If required, module side expandable by 2 x 150w with low installation effort
• Average daily yield between March and October: approx. 1200wh (approx. 100Ah)
• Plug & Play ready-to-connect system - plug together and go
• Allows operation of 12v and 230v loads, as well as 5v usb consumers
• usb charging possibility directly at the charge controller (max. 2,4A)
• Easy to read lcd display informs about all operating parameters
• Flexible mounting possibility thanks to 8m connection cable from module to controller
• Extensive electronic protection functions, such as overload protection, overtemperature protection, undervoltage shutdown, short-circuit protection, reverse polarity protection, etc.
• rs485 communication port on the voltage transformer offers extensive configuration possibilities via pc (interface cable rs485 to usb included)
• Charge controller enables temperature compensated charging - temperature sensor included in delivery
• Configurable 12v load output at the charge controller for loads up to max. 45a - suitable e.g. for lighting control

Application areas

This complete system can be used in many ways. Whether as a stationary system on the mountain hut or in the allotment garden - the permanent operation of small coolers and refrigerators, as well as the charging of cell phones and laptops succeeds easily with this system. The installation on the motor home is also conceivable - we also have the corresponding brackets and adhesive sets for the attachment.

Extensive connection options

• 230v ac 50hz 1500w (15min - 1500w / permanent - 1200w) Schuko socket on the sine wave voltage converter
• 12v consumer output with 45a power directly on the charge controller
• 2 x usb charging port at the charge controller with max. 2.4a (total)
• 1 x usb charging port at the voltage converter with max. 1a power

Parts list - what's inside

• 2 x 150w Monocrystalline Solar Modul from Offgridtec 1140 x 680 x 35mm
• 1 x 1 pair of mc-4 compatible junction boxes for parallel connection of the two solar modules
• 1 x 45a pwm charge controller with clear lcd display and usb charging possibility - the device also has a 45a load output and is easy to operate - all important parameters can be read on the display
• 1 x 154Ah agm battery with m8 screw terminal Dimensions: 485 x 172 x 240mm (+5mm terminal) - the battery is absolutely maintenance free and leak proof and lasts up to 10 years depending on use
• 1 x 1500w 12v to 230v sine wave voltage converter with a Schuko socket incl. connection cable - the rated power of 1500w can be output by the device for 15 minutes - beyond that the inverter outputs 1200w and can handle short-time starting currents up to 2400w
• 1 x 8m 6mm² professional connection cable solar module to chargere controller with original Stäubli mc4 connectors and high quality Lapp Ölflex 2x6mm² solar cable
• 1 x 1.5m 10mm² battery connection cablewith MIDI fuse holder with 50A MIDI fuse and m8 ring terminals for connection between charge controller and battery
• 1 x Temperature sensor with 3m length for connection of the controller to the battery
• 1 x 1m 35mm² connection cable from inverter to battery (included with the voltage converter)
• 1 x Fuse holder + 250A mega fuse for installation between voltage transformer and battery positive pole for protection against short circuit

Note and accessories recommendation

If you plan to leave consumers permanently switched on at the voltage transformer, we recommend the use of an additional deep discharge protection. The voltage transformer switches off the connected consumer when undervoltage is reached - but not itself. In case of longer absence (e.g. over night) the battery can be deeply discharged by the self-consumption of the voltage converter and thus be irreparably damaged. In this case we recommend the use of a Victron Battery Protect battery protector. For the included voltage transformer you need the 220a version. For the installation of the device between the voltage transformer and the battery you will still need a short connection cable is needed.

Roof mount for the solar module

Since there are different requirements for the mounting of a module and this varies greatly depending on the type of roof, the systems of the Autark series are not equipped with a roof mount as standard. This can of course be purchased additionally - find suitable suggestions here:

• Solar module holder for flat roof or wall mounting
• Mounting kit for pitched roof mounting on roof tiles (Frankfurter Pfanne etc.)
• Mounting kit for pitched roof mounting on roofing felt, corrugated hernite and sheet metal roofs with wooden substructure
• Fastening kit for pitched roof installation on Bieberschwanz tiles

Scope of delivery:

1x Solaranlage Autark XL-Master with 2x150w solar panel, 45a pwm charge controller with lcd display and usb ports, 1500w sine wave voltage converter, 154Ah agm battery, user manuals