Offgridtec® 110W SP-Ultra 12V High-End Solarpanel

This solar set for self-sufficient power supply in a motorhome from Offgridtec fulfils all requirements at the highest level. The innovative Mpp dual charge controller technology, paired with the extremely efficient 120W SP-Ultra 12V high-end solar module from Offgridtec (efficiency >21%), guarantees maximum yields. Specially designed for motorhomes, the off-grid solar system contains everything needed to install and commission the 12V solar system, apart from the batteries. In addition, the charge controller enables the solar system to be seamlessly integrated into the motorhome's Schaudt electrical block (EBL). Every component included in the set fulfils the highest quality standards. Special features Solar generator with two high-end solar modules with Sunpower cells and over 21% efficiency SPR series modules: small, light and powerful Dual charge controller from Germany: charging of living area and starter battery possible MPP tracker for maximum yields by reducing the entire module voltage EBL-capable: Connection to Schaudt electric block and up to 2 battery circuits possible Our customer service team will be happy to help you with any questions or requests for changes. (e-mail: [email protected] Tel: +49 (0) 8721 7786187) Daily yield In the summer from May to October in northern Germany, the average daily yield is 960Wh, although even higher yields can be achieved in more southerly regions. With the Solar-Mobil series, we rely on solid brand power, despite the favourable conditions for our complete sets. Compare the individual prices of our supplied components! The components supplied: 2 x Offgridtec® 120W SP-Ultra 12V high-end solar panel 1 x Votronic 1717 MPP 260 CI solar charge controller 1 x Votronic LCD solar computer S 1 x Offgridtec roof bushing 1-fold black for cable diameter 13mm-18mm 2 x roof spoiler set for attaching the solar modules (black) 1 x 8m solar cable (2x6mm² cores in one cable) - completely ready for connection 1 x 1.5m battery cable with fuse and EBL connection cable 1x Offgridtec junction sockets Y-plug (pair) 1 x mounting adhesive set with instructions and accessories required for pre-treatment Expert help included if required! Our solar kit provides everything you need to charge your batteries on the move. What makes our motorhome solar systems so special is that we use a particularly robust mounting system that can simply be stuck on. The module can be easily unscrewed from the spoiler if you ever need access to the area under the solar module. This set is designed so that it can be easily extended with another module in the same power class. We have also placed particular emphasis on quality when it comes to the critical cable feed-through into the interior of the motorhome. The cable gland supplied is made from the same sturdy material as the roof spoiler for the solar modules and can simply be glued on. The connection is absolutely watertight and will last for many years. Offgridtec® 120W SP-Ultra 12V high-end solar module Our monocrystalline 120W/12V high-end solar panel offers back-contacted high-power solar cells from the renowned American manufacturer Sunpower - the best technology currently available with an efficiency of over 21%. This panel combines the top performance of the world's best solar cells with the advanced back-contact process. The result is a high-end product at an attractive price. When producing this series, we focussed on ensuring that every detail of the module corresponds to the high-quality cells. In addition, this panel is significantly lighter and more compact than conventional solar modules with comparable performance. Even in poorer light conditions, the SP series achieves a higher output than our conventional mono series. Technical data Max. Power: 120W Max. Current (Imp): 6.05A Voltage (Vmp): 19.8V Short-circuit current (Isc): 6.41A Open circuit voltage (Voc): 23.35V Dimensions: 1055 x 540 x 35 mm (HxWxD) Weight; 7.5 kg Votronic 1717 MPP 260 CI Solar charge controller The MPP 260 CI solar charge controller from Votronic (MPN 1717) is a modern solution for efficiently charging your batteries with solar energy. With a maximum charging power of 260 watts and proven MPP technology, this charge controller maximises the yield of your solar system. Ideal for motorhomes, boats and other vehicles, it efficiently converts solar energy into electrical power to ensure a reliable energy supply. Technical Data Battery nominal voltage lead: 12V Battery nominal voltage LiFePO4: 12.0 - 13.3V Solar module voltage (Voc) max: 60V Solar module current max: 0-15A Solar module output (Pmax): 40 - 260Wp Recommended minimum battery capacity lead: > 60Ah Recommended minimum battery capacity LiFePO: > 45Ah Charging current body battery max.: 0 - 18.5A Charging current starter battery max.: 0-1.0A Switching output AES refrigerator: 12V / 0.2A Ambient temperature: -20 to +45 °C Dimensions: 131 x 77 x 40mm Weight: 235g LCD-Solar-Computer S The measured values are clearly presented on the display and can be easily operated at the touch of a button for better control and utilisation of the solar system. The current solar power is also always shown as a bar graph, allowing you to check at a glance. The display is backlit (switchable) and is also very easy to read from greater distances and in all lighting conditions. Roof spoiler assembly set Spoiler profiles are the first choice for caravans and motorhomes in particular when it comes to neatly mounting solar modules. If the modules are mounted in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). The closed design of the spoiler also means that no branches or similar can get caught under the solar modules. Spoiler dimensions: L x W x H: 54.5cm x 8.9cm (including approx. 3cm module support surface per spoiler) x 6.5cm Cabling set All necessary cables are already pre-crimped with specialised tools. So you don't need to buy any special pliers for the solar plugs. The cable has a length of 8m and contains 2 wires of 6mm² each Cable bushing The cable feedthroughs from the roof to the interior must be absolutely tight to prevent long-term damage to the insulation and furnishings. Our roof ducts are made of robust, UV and weather-resistant material, which is also used for the mounting brackets. They offer maximum stability, slip resistance and optimum sealing with a wide adhesive edge. The grommets can simply be glued on using the same adhesive set as for the mounting brackets and can be painted to match the desired surface if required. The bonding A correctly executed bond is superior to a screw connection in the demanding use of motorhomes or boats. A strength of over 4 N/mm2 can be achieved on painted or GRP surfaces, which would not be possible with a screw connection in the thin aluminium or GRP layer. Our adhesive kit enables even non-professionals to create a strong connection between spoilers and the substrate. The adhesive kit contains all the necessary components so that even DIY enthusiasts can create a professional connection. Stainless steel screws for attaching the solar modules are included, as are detailed bonding instructions. In addition, all you need is a standard hand lever press for cartridges and a lint-free cloth. Individual change requests on request If you prefer a different charge controller from our range or cables in a different length, please do not hesitate to contact us. We will be happy to discuss your individual requirements. It is also possible to change the colour of the spoiler and the roof bushing from black to white. All you need to do is send a brief enquiry to our customer service team with the item number and change request. You can enquire about any costs directly with customer service.

The solar module 150w mono from Offgridtec (mpn 3-01-001255) works with monocrystalline solar cells with a high efficiency of >22,3% and is ideal for 12v systems thanks to its 20v operating voltage. In Offgridtec mono solar modules only cells of the highest quality grade are installed and guarantee a constant high quality and performance with maximum service life thanks to state-of-the-art manufacturing. Features of Offgridtec 150w 12v mono solar panel proven quality directly from Offgridtec manufactured according to the latest standards monocrystalline solar cells extremely resistant ESG glass makes the module usable even in the most adverse environmental conditions ideal for 12v systems on land or in mobile solar systems 2 bypass diodes - minimized power loss in shaded conditions The mono 150w 12v is one of over 40 proven solar panels from the Offgridtec portfolio and participates in Offgridtecs experience in manufacturing high quality 12v and 24v solar cells. The module can be used in very adverse operating conditions thanks to the extremely resistant solar glass. It can withstand heavy hail and storms or extreme cold and heat without any problems and thanks to the integrated bypass diodes, the module can continue to produce power even in shaded or low light conditions. The most important technical data at a glance Power (Pmax): 150w Working voltage (Vmp): 20 V Open circuit voltage (Voc): 24 V max. current (Imp): 7.5 A Short circuit current (Isc): 8.1 A max. system voltage: 1000 V permissible ambient temperature: -40°C - +85°C Dimensions: 1140 x 680 x 35 mm Weight: 12 kg Universally applicable Offgridtecs 150w 12v Mono is universally applicable for example in 12 Volt Solaranlagen on garden houses, allotments or for the power supply of lighting applications, self-sufficient systems of signal and surveillance technology and many more. But also in mobile systems such as in mobile home solar systems this panel makes a good figure. The connection cables are 80 cm long and equipped with MC4 connectors. Scope of delivery: Offgridtec 3-01-001255 150w mono 12v solar panel