Safe shopping with solar experts
Fast Shipping
Top choice renowned brands
Customer service:
+49 (0) 8721 91994-00


The Victron Argo FET-isolator 200-3 (MPN ARG200301020R) allows the supply of 3 separate battery circuits with up to 200A charging current via one power source. This source can be the alternator or a charger.

As the single battery banks are not connected it is not possible that they discharge or affect each other. The difference between isolators and FET-isolators is that FET-isolators barely generate any voltage losses and therefore are much more efficient.

Features:

  • max. charging current of 200A and connectors for 3 battery circuits
  • with 0.02V at low and 0.1V on high currents there is only a very small voltage loss which makes a compensating voltage increase unnecessary
  • proven Victron quality with a guarantee of 5 years

Only small voltage losses
Compared to common isolators there are only very small voltage losses with FET-isolators - only 0.02V at low and 0.1V on high currents. With Argo FET-isolators there is no voltage increase necessary. You should still keep an eye on short cable lengths and sufficient cable diameters.

Example: A current of 100A at a cable length of 10m and 50m² cable diameter has a voltage loss of 0.26V. At a cable of 5m and 10mm² a 50A-current generates a loss of 0.35V! That's why FET-isolators belong to the most efficient charging current distributors on the market.

Delivery scope:
1x Victron ARG200201020R FET 200-3 FET Isolator 200A for 3 batteries

 

Victron_Argofet_Manual.pdf Download
Victron_Argofet_200-3_Dimensions.pdf Download
Victron_Argodiode-Argofet-BCD_CE.pdf Download
Victron_Argofet_Datasheet.pdf Download
Victron_Argofet_Datenblatt.pdf Download
Victron_Argodiode-Argofet-BCD_Declaration-of-Conformity.pdf Download
Manufacturer: Victron Energy
Product Type: Victron Argofet 200-3 Three batteries 200A
offgridtec.com Reviews with ekomi.de
Lassen Sich mit dem Ladestromverteiler auch Lithiumbänke bis 58 Volt /100A getrennt Laden?
Leider nein. Die Argo-FET-Batterie-Trenner können nur für 12V oder 24V Systeme verwendet werden.
Loading products