Victron BlueSolar PWM-Light 12/24V 5A Solar Charge Controller
€19.22*
€16.15**
The BlueSolar PWM-Light 12/24-5 from Victron (MPN: SCC010005000) is a PWM solar charge controller with a rated charging current of 5 A for 12- and 24-V battery systems. It automatically detects the system voltage, charges the battery in three stages, and provides a programmable load output for time- or light-controlled DC loads.
PWM charge controller with programmable load output
- Automatic detection of system voltage
- Three-stage charging with constant-current, constant-voltage, and trickle-charging phases
- Programmable load output with lighting control
- Timer operation for 1 to 13 hours after sunset
- Automatic load shutdown at low battery voltage
- Two-digit seven-segment display for configuration
- LED indicators for charging phase, battery status, and load output
Three-stage PWM charging
The charge controller first charges the connected battery with a constant current and then with a constant voltage. Two hours after reaching the constant voltage, the controller switches to the lower float charge voltage. The charging parameters are fixed and cannot be programmed. Before use, the specified charging voltages must therefore be checked against the specifications of the battery being used. As a PWM charge controller, the device requires a solar module configuration that matches the battery voltage. For a 12-V system, solar modules with 36 cells are intended. In a 24-V system, a 72-cell module or two 36-cell modules connected in series are used.
Time- and Light-Dependent Load Control
The load output offers various operating modes for connected DC loads. In timer mode, it is automatically activated after sunset and remains on for 1 to 13 hours, depending on the selected setting. Additionally, operation from dusk to dawn, manual control, and load control based solely on the battery voltage are available. The load output can also be permanently deactivated if necessary.
Indicators for Operation and Troubleshooting
The LED indicators provide information on the current charging phase, the battery status, and the status of the load output. Overload and short circuits are indicated by different flashing signals. After a shutdown triggered by such an event, the load output attempts to restart after 30 seconds. In general, it offers protection against overload, short circuit, overtemperature, and reverse polarity.
Technical Specifications
- Battery voltage: 12/24 V
- Rated charging current: 5 A
- Maximum solar voltage: 28 V for 12-V systems; 55 V for 24-V systems
- Self-consumption: less than 10 mA
- Constant charging voltage: 14.2 V / 28.4 V
- Trickle charge voltage: 13.8 V / 27.6 V
- Load output shutdown: 11.2 V / 22.4 V
- Manual reconnection: 12.6 V / 25.2 V
- Automatic reconnection: 13.1 V / 26.2 V
- Overload shutdown: after 60 seconds at 130% load; after 5 seconds at 160% load
- Operating temperature: −20 to +50 °C at full load
- Permissible humidity: maximum 95%, non-condensing
- Protection class: IP20
- Weight: 0.15 kg
- Dimensions: 70 × 133 × 33.5 mm
Package Contents
1x BlueSolar PWM-Light 12/24-5 Solar Charge Controller
Manufactuerer Information
Victron Energy
Victron Energy B.V.
De Paal 35
1351 JG Almere
Netherlands
Mail: sales@victronenergy.com
Tel.: +31 365359700