Victron Centaur Charger 12/60 (3) 12V 60A battery charger with 3 outputs

The Centaur 12/60 (3) from Victron Energy (MPN CCH012060000) is a high-quality battery charger for 12V batteries with 3 charging outputs and a maximum charging current of 60A, which can be distributed as desired across the 3 outputs. Thanks to its wide input voltage range of 90-265 V AC, the Centaur 12/60 (3) can be used almost anywhere in the world without any special settings. The IUoU charging curve with three-stage characteristics ensures gentle charging of your battery or batteries. The Centaur is suitable for charging GEL, AGM, and lead-acid batteries, where the battery type can be quickly selected via a DIP switch on the device housing.

The Centaur battery charger is fully high-frequency regulated. The power input is electronically regulated via the power factor in the first power stage. The next stage takes over the galvanic isolation and ensures perfect DC voltage at the outputs. The electronic components are protected against moisture and dirt by a special coating to ensure the longevity of the device. Three high-performance batteries can be charged simultaneously with this charger.

important features of the Centaur 12/60 at a glance

• for 12V battery voltage, IP20 protection class
• Victron part number: CCH012060000
• 3 battery charging outputs, each capable of delivering a full 60A charging current (maximum total charging current = 60A)
• suitable for batteries with a capacity of 240Ah - 600Ah
• three-stage IUoU charging curve
• universal 90–265V AC input for mains connection, can operate at both 50Hz and 60Hz
• suitable for charging gel, AGM, and lead-acid batteries

Centaur 12/60 (3): Quality without compromise

An aluminum housing with epoxy powder coating, drip protection against condensation, and stainless steel mounting parts allow the Centaur 12/60 to withstand the harshest conditions such as heat, humidity, and salty atmospheres. The circuit boards are securely protected against corrosion by an acrylic coating. Temperature sensors ensure that all power components operate within specified limits and, if necessary, automatically reduce the output current in extreme conditions.

Three-stage charging curve with temperature compensation

Centaur initially charges with constant current (bulk) until the charging current has dropped to 70% of the nominal value. This is followed by a fixed four-hour constant voltage phase, at the end of which a trickle charging phase begins. The charging voltage is regulated via the internal temperature sensor (-2 mV/°C per cell). The full charging current is distributed across three outputs, with each output delivering full power when only one battery is connected.

Different battery types can be used with the Centaur 12/60; the default setting is for gel batteries. Other batteries (lead-acid or AGM) can be used after making the appropriate setting on the toggle switch (bottom left behind the front panel).

Scope of delivery:

1x Victron Energy CCH012060000 Centaur 12/60 (3)
1x Installation instructions